Support for flushing individual logs, so that the user can
selectively flush a subset of the server logs.
Flush of individual logs is done according to the
following syntax:
FLUSH <log_category> LOGS;
The syntax is extended so that the user is able to flush a
subset of logs:
FLUSH [log_category LOGS,];
where log_category is one of:
SLOW
ERROR
BINARY
ENGINE
GENERAL
RELAY.
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Test result for WL#5142.
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Added the test file to verify if the 'flush individual log'
statement works fine.
sql/log.cc:
Added the two functions to flush slow and general log.
sql/sql_parse.cc:
Added code to flush specified logs against the option.
sql/sql_yacc.yy:
Added code to parse the 'flush * log' statement syntax and
set its option to Lex->type.
beyond unsigned long.
BUG#44779: binlog.binlog_max_extension may be causing failure on
next test in PB
NOTE1: this is the backport to next-mr.
NOTE2: already includes patch for BUG#44779.
Binlog file extensions would turn into negative numbers once the
variable used to hold the value reached maximum for signed
long. Consequently, incrementing value to the next (negative) number
would lead to .000000 extension, causing the server to fail.
This patch addresses this issue by not allowing negative extensions
and by returning an error on find_uniq_filename, when the limit is
reached. Additionally, warnings are printed to the error log when the
limit is approaching. FLUSH LOGS will also report warnings to the
user, if the extension number has reached the limit. The limit has been
set to 0x7FFFFFFF as the maximum.
mysql-test/suite/binlog/t/binlog_max_extension.test:
Test case added that checks the maximum available number for
binlog extensions.
sql/log.cc:
Changes to find_uniq_filename and test_if_number.
sql/log.h:
Added macros with values for MAX_LOG_UNIQUE_FN_EXT and
LOG_WARN_UNIQUE_FN_EXT_LEFT, as suggested in review.
The mentioned on the bug report set of bugs fixes have not be pushed to the main trees.
Fixed with extracting commits done to 6.0-rpl tree and applying them to the main 5.1.
Notes.
1. part of changes - the mtr's specific - were packported to the main 5.0 tree for mtr v1
as http://lists.mysql.com/commits/46562
However, there is no that fix anymore in the mtr v2. (This fact was mailed to mtr maintaining
people).
2. Bug@36929 crash in kill_zombie_dump_threads-> THD::awake() with replication tests
is not backported because the base code of the patch is libevent and that was removed
from the main trees due to its instability.
client/mysqlbinlog.cc:
fixes for BUG#35546
mysql-test/suite/rpl/r/rpl_bug41902.result:
the new tests result file is added.
mysql-test/suite/rpl/t/rpl_bug41902-slave.opt:
conf file for bug41902 testing is added.
mysql-test/suite/rpl/t/rpl_bug41902.test:
regression tests for Bug #41902 is added.
sql/log.cc:
collection of changes due to Bug #48463.
sql/log.h:
collection of changes due to Bug #48463.
sql/rpl_rli.h:
collection of changes due to Bug #48463.
sql/slave.cc:
collection of changes due to Bug #48463.
sql/sql_repl.cc:
collection of changes due to Bug #48463.
One statement that have more than one different tables to update with
autoinc columns just was marked as unsafe in mixed mode, so the unsafe
warning can't be produced in statement mode.
To fix the problem, mark the statement as unsafe in statement mode too.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
The test case is updated due to the patch of bug#45827.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
The test result is updated due to the patch of bug#45827.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Test result for bug#45827.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test to verify if stmt that have more than one
different tables to update with autoinc columns will
produce unsafe warning
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
The test result is updated due to the patch of bug#45827.
mysql-test/suite/rpl/t/rpl_trigger.test:
The test case is updated due to the patch of bug#45827.
mysql-test/suite/rpl/t/rpl_variables_stm.test:
The test case is updated due to the patch of bug#45827.
sql/sql_base.cc:
Reomved the 'set_current_stmt_binlog_row_based_if_mixed' function
for producing unsafe warnings by executing 'decide_logging_format'
function later in statement mode
Detailed revision comments:
r6101 | jyang | 2009-10-23 11:45:50 +0300 (Fri, 23 Oct 2009) | 7 lines
branches/zip: Update test result with the WARN_LEVEL_ERROR
to WARN_LEVEL_WARN change. This is the same result as
submitted in rb://172 review, which approved by Sunny Bains
and Marko.
Detailed revision comments:
r6100 | jyang | 2009-10-22 06:51:07 +0300 (Thu, 22 Oct 2009) | 6 lines
branches/zip: As a request from mysql, WARN_LEVEL_ERROR cannot
be used for push_warning_* call any more. Switch to
WARN_LEVEL_WARN. Bug #47233.
rb://172 approved by Sunny Bains and Marko.
Detailed revision comments:
r6095 | vasil | 2009-10-19 16:04:59 +0300 (Mon, 19 Oct 2009) | 7 lines
branches/zip:
Fix Bug#47808 innodb_information_schema.test fails when run under valgrind
by using the wait_until_rows_count macro that loops until the number of
rows becomes 14 instead of sleep 0.1, which is obviously very fragile.
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection. Restarting master server can bring two problems as following:
1. The time out error is encountered sporadically. The slave I/O thread tries
to reconnect master ten times, which is set in my.cnf. So in the test
framework sporadically the slave I/O thread really stoped when it can't
reconnect to master in the ten times successfully before the master starts,
then the time out error will be encountered while waiting for the slave to
start.
2. These warnings and errors are produced in server log file when
the slave I/O thread tries to get the values of the UNIX_TIMESTAMP,
SERVER_ID from master under the transient network disconnection.
To fix problem 1, increase the master retry count to sixty times,
so that the slave I/O thread has enough time to reconnect master
successfully.
To fix problem 2, suppress these warnings and errors by mtr suppression,
because they are expected.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock-slave.opt:
Added the *.opt file for increasing master retry count to
sixty times.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added mtr suppression for suppressing warnings and errors
in server log file.
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
CMakeLists.txt:
Add plugin/semisync subdirectory
mysql-test/mysql-test-run.pl:
Check for semisync dll for Windows
mysql-test/suite/rpl/r/rpl_semi_sync.result:
Update result file
mysql-test/suite/rpl/t/rpl_semi_sync.test:
Test semi-sync on Windows
plugin/semisync/semisync_master.cc:
Define gettimeofday for Windows
Before the patch, slaves only appear in the output of SHOW SLAVE HOSTS
when report-host option is set. If an expected slave does not appear in
the list, nobody knows whether the slave does not connect or has started
without the "report-host" option. The output also contains a strange
field "Rpl_recovery_rank" which has never been implemented and the manual
of MySQL5.4 declares that the field has been removed from MySQL5.4.
This patch is done with these,
According to the manual of MySQL5.4, "Rpl_recovery_rank" is removed.
Slaves will register themselves to master no matter if report_host option is set
or not. When slaves are registering themselves, their Server_ids, report_host
and other information are together sent to master. Sever_ids are never null
and is unique in one replication group. Slaves always can be identified with
different Server_ids no matter if report_host exists.
file
Issuing 'FLUSH LOGS' does not close and reopen indexfile.
Instead a SEEK_SET is performed.
This patch makes index file to be closed and reopened whenever a
rotation happens (FLUSH LOGS is issued or binary log exceeds
maximum configured size).
mysql-test/suite/binlog/r/binlog_delete_and_flush_index.result:
Result file.
mysql-test/suite/binlog/t/binlog_delete_and_flush_index.test:
Test case.
sql/log.cc:
Added LOG_CLOSE_INDEX flag when calling MYSQL_BIN_LOG::close
from within MYSQL_BIN_LOG::new_file_impl (which should just be
called whenever a rotation is to happen - FLUSH LOGS issued or
binlog size exceeds the maximum configured).
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running
server.
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will
not be overrided by the server_id stored in the 'format description BINLOG statement'.
mysql-test/extra/binlog_tests/binlog.test:
Added test to verify if the server_id stored in the 'format
description BINLOG statement' will override the server_id
of the server executing the statements.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Test result for bug#46640
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Test result for bug#46640
sql/log_event.cc:
Moved rows_event_stmt_clean() call from update_pos() to apply_event(). This in any case
makes more sense, and is needed as update_pos() is no longer called when executing
BINLOG statements.
Moved setting of rli->relay_log.description_event_for_exec from
Format_description_log_event::do_update_pos() to
Format_description_log_event::do_apply_event()
sql/log_event_old.cc:
Moved rows_event_stmt_clean() call from update_pos() to apply_event(). This in any case
makes more sense, and is needed as update_pos() is no longer called when executing
BINLOG statements.
sql/slave.cc:
The skip flag is no longer needed, as the code path for BINLOG statement has been
cleaned up.
sql/sql_binlog.cc:
Don't invoke the update_pos() code path for the BINLOG statement, as it contains code
that is redundant and/or harmful (especially setting thd->server_id).
Remove functions that no longer needed
Fix warning suppressions
mysql-test/suite/rpl/t/rpl_semi_sync.test:
Fix warning suppressions
plugin/semisync/semisync_slave.cc:
Remove functions that no longer needed
plugin/semisync/semisync_slave.h:
Remove functions that no longer needed
Add an option to control whether the master should keep waiting
until timeout when it detected that there is no semi-sync slave
available.
The bool option 'rpl_semi_sync_master_wait_no_slave' is 1 by
defalt, and will keep waiting until timeout. When set to 0, the
master will switch to asynchronous replication immediately when
no semi-sync slave is available.
Semi-sync status were not reset by FLUSH STATUS, this was because
all semi-sync status variables are defined as SHOW_FUNC and FLUSH
STATUS could only reset SHOW_LONG type variables.
This problem is fixed by change all status variables that should
be reset by FLUSH STATUS from SHOW_FUNC to SHOW_LONG.
After the fix, the following status variables will be reset by
FLUSH STATUS:
Rpl_semi_sync_master_yes_tx
Rpl_semi_sync_master_no_tx
Note: normally, FLUSH STATUS itself will be written into binlog
and be replicated, so after FLUSH STATS, one of
Rpl_semi_sync_master_yes_tx
Rpl_semi_sync_master_no_tx
can be 1 dependent on the semi-sync status. So it's recommended
to use FLUSH NO_WRITE_TO_BINLOG STATUS to avoid this.
Semi-sync uses an extra connection from slave to master to send
replies, this is a normal client connection, and used a normal
SET query to set the reply information on master, which is visible
to user and may cause some confusion and complaining.
This problem is fixed by using the method of sending reply by
using the same connection that is used by master dump thread to
send binlog to slave. Since now the semi-sync plugins are integrated
with the server code, it is not a problem to use the internal net
interfaces to do this.
The master dump thread will mark the event requires a reply and
wait for the reply when the event just sent is the last event
of a transaction and semi-sync status is ON; And the slave will
send a reply to master when it received such an event that requires
a reply.
From r5917 to r5940
Detailed revision comments:
r5917 | marko | 2009-09-16 04:56:23 -0500 (Wed, 16 Sep 2009) | 1 line
branches/zip: innobase_get_cset_width(): Cache the value of current_thd.
r5919 | vasil | 2009-09-16 13:37:13 -0500 (Wed, 16 Sep 2009) | 4 lines
branches/zip:
Whitespace cleanup in the ChangeLog.
r5920 | vasil | 2009-09-16 13:47:22 -0500 (Wed, 16 Sep 2009) | 4 lines
branches/zip:
Add ChangeLog entries for r5916.
r5922 | marko | 2009-09-17 01:32:08 -0500 (Thu, 17 Sep 2009) | 4 lines
branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3.
Apparently, the definition of compressBound() has slightly changed.
This has been filed as Mantis Issue #345.
r5924 | vasil | 2009-09-17 23:59:30 -0500 (Thu, 17 Sep 2009) | 4 lines
branches/zip:
White space and formatting cleanup in the ChangeLog
r5934 | vasil | 2009-09-18 12:06:46 -0500 (Fri, 18 Sep 2009) | 4 lines
branches/zip:
Fix typo.
r5935 | calvin | 2009-09-18 16:08:02 -0500 (Fri, 18 Sep 2009) | 6 lines
branches/zip: fix bug#44338; minor non-functional changes
Bug#44338 innodb has message about non-existing option
innodb_max_files_open. Change the option to innodb_open_files.
The fix was committed into 6.0 branch.
r5938 | calvin | 2009-09-19 02:14:25 -0500 (Sat, 19 Sep 2009) | 41 lines
branches/zip: Merge revisions 2584:2956 from branches/6.0,
except c2932.
Bug#37232 and bug#31183 were fixed in the 6.0 branch only.
They should be fixed in the plugin too, specially MySQL 6.0
is discontinued at this point.
------------------------------------------------------------------------
r2604 | inaam | 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) | 8 lines
branches/6.0 bug#37232
Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1.
Now SELECT on t1 is performed as a consistent read when the isolation
level is set to READ COMMITTED.
Reviewed by: Heikki
------------------------------------------------------------------------
r2605 | inaam | 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) | 7 lines
branches/6.0
Added a comment to clarify why distinct calls to read MySQL binary
log file name and log position do not entail any race condition.
Suggested by: Heikki
------------------------------------------------------------------------
r2956 | inaam | 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) | 11 lines
branches/6.0 bug#31183
If the system tablespace runs out of space because 'autoextend' is
not specified with innodb_data_file_path there was no error message
printed to the error log. The client would get 'table full' error.
This patch prints an appropriate error message to the error log.
rb://43
Approved by: Marko
------------------------------------------------------------------------
r5940 | vasil | 2009-09-21 00:26:04 -0500 (Mon, 21 Sep 2009) | 4 lines
branches/zip:
Add ChangeLog entries for c5938.
mysql-test/suite/rpl/r/rpl_stop_middle_group.result:
the new result file
mysql-test/suite/rpl/t/rpl_stop_middle_group.test:
renamed from rpl_row_stop_middle_update and added a regression test for bug#45940.
From revision r5703 to r5716
Detailed revision comments:
r5703 | marko | 2009-08-27 02:25:00 -0500 (Thu, 27 Aug 2009) | 41 lines
branches/zip: Replace the constant 3/8 ratio that controls the LRU_old
size with the settable global variable innodb_old_blocks_pct. The
minimum and maximum values are 5 and 95 per cent, respectively. The
default is 100*3/8, in line with the old behavior.
ut_time_ms(): New utility function, to return the current time in
milliseconds. TODO: Is there a more efficient timestamp function, such
as rdtsc divided by a power of two?
buf_LRU_old_threshold_ms: New variable, corresponding to
innodb_old_blocks_time. The value 0 is the default behaviour: no
timeout before making blocks 'new'.
bpage->accessed, bpage->LRU_position, buf_pool->ulint_clock: Remove.
bpage->access_time: New field, replacing bpage->accessed. Protected by
buf_pool_mutex instead of bpage->mutex. Updated when a page is created
or accessed the first time in the buffer pool.
buf_LRU_old_ratio, innobase_old_blocks_pct: New variables,
corresponding to innodb_old_blocks_pct
buf_LRU_old_ratio_update(), innobase_old_blocks_pct_update(): Update
functions for buf_LRU_old_ratio, innobase_old_blocks_pct.
buf_page_peek_if_too_old(): Compare ut_time_ms() to bpage->access_time
if buf_LRU_old_threshold_ms && bpage->old. Else observe
buf_LRU_old_ratio and bpage->freed_page_clock.
buf_pool_t: Add n_pages_made_young, n_pages_not_made_young,
n_pages_made_young_old, n_pages_not_made_young, for statistics.
buf_print(): Display buf_pool->n_pages_made_young,
buf_pool->n_pages_not_made_young. This function is only for crash
diagnostics.
buf_print_io(): Display buf_pool->LRU_old_len and quantities derived
from buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young.
This function is invoked by SHOW ENGINE INNODB STATUS.
rb://129 approved by Heikki Tuuri. This addresses Bug #45015.
r5704 | marko | 2009-08-27 03:31:17 -0500 (Thu, 27 Aug 2009) | 32 lines
branches/zip: Fix a critical bug in fast index creation that could
corrupt the created indexes.
row_merge(): Make "half" an in/out parameter. Determine the offset of
half the output file. Copy the last blocks record-by-record instead of
block-by-block, so that the records can be counted. Check that the
input and output have matching n_rec.
row_merge_sort(): Do not assume that two blocks of size N are merged
into a block of size 2*N. The output block can be shorter than the
input if the last page of each input block is almost empty. Use an
accurate termination condition, based on the "half" computed by
row_merge().
row_merge_read(), row_merge_write(), row_merge_blocks(): Add debug output.
merge_file_t, row_merge_file_create(): Add n_rec, the number of records
in the merge file.
row_merge_read_clustered_index(): Update n_rec.
row_merge_blocks(): Update and check n_rec.
row_merge_blocks_copy(): New function, for copying the last blocks in
row_merge(). Update and check n_rec.
This bug was discovered with a user-supplied test case that creates an
index where the initial temporary file is 249 one-megabyte blocks and
the merged files become smaller. In the test, possible merge record
sizes are 10, 18, and 26 bytes.
rb://150 approved by Sunny Bains. This addresses Issue #320.
r5705 | marko | 2009-08-27 06:56:24 -0500 (Thu, 27 Aug 2009) | 11 lines
branches/zip: dict_index_find_cols(): On column name lookup failure,
return DB_CORRUPTION (HA_ERR_CRASHED) instead of abnormally
terminating the server. Also, disable the previously added diagnostic
output to the error log, because mysql-test-run does not like extra
output in the error log. (Bug #44571)
dict_index_add_to_cache(): Handle errors from dict_index_find_cols().
mysql-test/innodb_bug44571.test: A test case for triggering the bug.
rb://135 approved by Sunny Bains.
r5706 | inaam | 2009-08-27 11:00:27 -0500 (Thu, 27 Aug 2009) | 20 lines
branches/zip rb://147
Done away with following two status variables:
innodb_buffer_pool_read_ahead_rnd
innodb_buffer_pool_read_ahead_seq
Introduced two new status variables:
innodb_buffer_pool_read_ahead = number of pages read as part of
readahead since server startup
innodb_buffer_pool_read_ahead_evicted = number of pages that are read
in as readahead but were evicted before ever being accessed since
server startup i.e.: a measure of how badly our readahead is
performing
SHOW INNODB STATUS will show two extra numbers in buffer pool section:
pages read ahead/sec and pages evicted without access/sec
Approved by: Marko
r5707 | inaam | 2009-08-27 11:20:35 -0500 (Thu, 27 Aug 2009) | 6 lines
branches/zip
Remove unused macros as we erased the random readahead code in r5703.
Also fixed some comments.
r5708 | inaam | 2009-08-27 17:43:32 -0500 (Thu, 27 Aug 2009) | 4 lines
branches/zip
Remove redundant TRUE : FALSE from the return statement
r5709 | inaam | 2009-08-28 01:22:46 -0500 (Fri, 28 Aug 2009) | 5 lines
branches/zip rb://152
Disable display of deprecated parameter innodb_file_io_threads in
'show variables'.
r5714 | marko | 2009-08-31 01:10:10 -0500 (Mon, 31 Aug 2009) | 5 lines
branches/zip: buf_chunk_not_freed(): Do not acquire block->mutex unless
block->page.state == BUF_BLOCK_FILE_PAGE. Check that block->page.state
makes sense.
Approved by Sunny Bains over the IM.
r5716 | vasil | 2009-08-31 02:47:49 -0500 (Mon, 31 Aug 2009) | 9 lines
branches/zip:
Fix Bug#46718 InnoDB plugin incompatible with gcc 4.1 (at least: on PPC): "Undefined symbol"
by implementing our own check in plug.in instead of using the result from
the check from MySQL because it is insufficient.
Approved by: Marko (rb://154)
The issue appears when number of heartbeat events non-zero before start of test
block. But really we need to check that no new events has received during test block.
So I did following:
1. Replace absolute values by diff of values
2. Increase heartbeat period from 1.5 to 5 sec
