includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
revno: 4559
committer: Marc Alff <marc.alff@oracle.com>
branch nick: mysql-5.6-bug14741537-v4
timestamp: Thu 2012-11-08 22:40:31 +0100
message:
Bug#14741537 - MYSQL 5.6, GTID AND PERFORMANCE_SCHEMA
Before this fix, statements using performance_schema tables:
- were marked as unsafe for replication,
- did cause warnings during execution,
- were written to the binlog, either in STATEMENT or ROW format.
When using replication with the new GTID feature,
unsafe warnings are elevated to errors,
which prevents to use both the performance_schema and GTID together.
The root cause of the problem is not related to raising warnings/errors
in some special cases, but deeper: statements involving the performance
schema should not even be written to the binary log in the first place,
because the content of the performance schema tables is 'local' to a server
instance, and may differ greatly between nodes in a replication
topology.
In particular, the DBA should be able to configure (INSERT, UPDATE, DELETE)
or flush (TRUNCATE) performance schema tables on one node,
without affecting other nodes.
This fix introduces the concept of a 'non-replicated' or 'local' table,
and adjusts the replication logic to ignore tables that are not replicated
when deciding if or how to log a statement to the binlog.
Note that while this issue was detected using the performance_schema,
other tables are also affected by the same problem.
This fix define as 'local' the following tables, which are then never
replicated:
- performance_schema.*
- mysql.general_log
- mysql.slow_log
- mysql.slave_relay_log_info
- mysql.slave_master_info
- mysql.slave_worker_info
Existing behavior for information_schema.* is unchanged by this fix,
to limit the scope of changes.
Coding wise, this fix implements the following changes:
1)
Performance schema tables are not using any replication flags,
since performance schema tables are not replicated.
2)
In open_table_from_share(),
tables with no replication capabilities (performance_schema.*),
tables with TABLE_CATEGORY_LOG (logs)
and tables with TABLE_CATEGORY_RPL_INFO (replication)
are marked as non replicated, with TABLE::no_replicate
3)
A new THD member, THD::m_binlog_filter_state,
indicate if the current statement is written to the binlog
(normal cases for most statements), or is to be discarded
(because the statements affects non replicated tables).
4)
In THD::decide_logging_format(), the replication logic
is changed to take into account non replicated tables.
Statements that affect only non replicated tables are
executed normally (no warning or errors), but not written
to the binlog.
Statements that affect (i.e., write to) a replicated table
while also using (i.e., reading from or writing to) a non replicated table
are executed normally in MIXED and ROW binlog format,
and cause a new error in STATEMENT binlog format.
THD::decide_logging_format() uses THD::m_binlog_filter_state
to indicate if a statement is to be ignored, when writing to
the binlog.
5)
In THD::binlog_query(), statements marked as ignored
are not written to the binary log.
6)
For row based replication, the existing test for 'table->no_replicate',
has been moved from binlog_log_row() to check_table_binlog_row_based().
Adjust full test suite to work with GTID.
Huge patch, mainly due to having to update .result file for all SHOW BINLOG
EVENTS and mysqlbinlog outputs, where the new GTID events pop up.
Everything was painstakingly checked to be still correct and valid .result
file updates.
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
Don't log updates to performance schema in replication log.
Ensure that we don't call ha_update after ha_index_or_rnd_end() is called on slave.
.bzrignore:
Ignore some generated files
mysql-test/include/show_slave_status.inc:
Ensure that ./ is removed from file names
mysql-test/suite/perfschema/r/binlog_mix.result:
Updated results
mysql-test/suite/perfschema/r/binlog_row.result:
Updated results
mysql-test/suite/perfschema/r/binlog_stmt.result:
Updated results
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
Updated results
mysql-test/suite/rpl/r/rpl_performance_schema.result:
Ensure that we don't crash slave when we update performance schema
mysql-test/suite/rpl/t/rpl_performance_schema.test:
Ensure that we don't crash slave when we update performance schema
sql/log_event.cc:
Ensure that we don't call ha_update after ha_index_or_rnd_end() is called.
Remove old code that is not needed anymore (like restarting read loop over all rows if no matcing row is found)
Simplify code
sql/log_event_old.cc:
Ensure that we don't call ha_update after ha_index_or_rnd_end() is called.
storage/myisam/ha_myisam.cc:
More DBUG_PRINT
storage/perfschema/ha_perfschema.h:
Don't log updates to performance schema in replication log.
Fixed the test case to be independent of build options used.
Removed the lowercase-table-names constraint, since performance schema tables are now in lowercase.
Before this fix, the performance schema tables were defined in UPPERCASE.
This was incompatible with the lowercase_table_names option, and caused
issues with the install / upgrade process, when changing the lower case
table names setting *after* the install or upgrade.
With this fix, all performance schema tables are exposed with lowercase names.
As a result, the name of the performance schema table is always lowercase,
no matter how / if / when the lowercase_table_names setting if changed.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
Problem: The test case failed because: (i) warning text in
result file differed from the warning output by the
server, and (ii) binlog contents in result file did
not show the statements logged wrapped in BEGIN/COMMIT
as it is the case after WL 2687.
Solution: We update the result file, but first we change the
unsafe warning text to also refer to performance_schema
table(s). This required changing the result files for
existing test cases that provide output for warnings
related to ER_BINLOG_UNSAFE_SYSTEM_TABLE. "Grepping" in
result files, shows that only binlog_unsafe contained
reference to such a warning.
We also update the result file with the missing
BEGIN/COMMIT statements.
