A read-only storage engine that stores it's data in (aws) S3
To store data in S3 one could use ALTER TABLE:
ALTER TABLE table_name ENGINE=S3
libmarias3 integration done by Sergei Golubchik
libmarias3 created by Andrew Hutchings
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
There were two newly enabled warnings:
1. cast for a function pointers. Affected sql_analyse.h, mi_write.c
and ma_write.cc, mf_iocache-t.cc, mysqlbinlog.cc, encryption.cc, etc
2. memcpy/memset of nontrivial structures. Fixed as:
* the warning disabled for InnoDB
* TABLE, TABLE_SHARE, and TABLE_LIST got a new method reset() which
does the bzero(), which is safe for these classes, but any other
bzero() will still cause a warning
* Table_scope_and_contents_source_st uses `TABLE_LIST *` (trivial)
instead of `SQL_I_List<TABLE_LIST>` (not trivial) so it's safe to
bzero now.
* added casts in debug_sync.cc and sql_select.cc (for JOIN)
* move assignment method for MDL_request instead of memcpy()
* PARTIAL_INDEX_INTERSECT_INFO::init() instead of bzero()
* remove constructor from READ_RECORD() to make it trivial
* replace some memcpy() with c++ copy assignments
The symptom of the bug was that one got the following in
the aria recovery log:
"Table 'xxx', id 57, has create_rename_lsn (1,0x12dee) more recent than LOGREC_FILE_ID's LSN (1,0x12dc4), ignoring open request"
After this all future redo entries was marked with
"For table of short id 57, table skipped, so skipping record"
Analyze:
When ending batch insert, create_rename_lsn for the table
is updated to signal that earlier redo entries for the
table can't be applied. The problem was that future redo
entries was also ignored as redo code assumed they where
for the old table.
Fixed by calling translog_dessign_id, which causes
future redo entries to be seen as belonging to the
updated table.
The warning was removed as this is a common case that happens if the table
was dropped and later created during the same checkpoint or if there was
a bulk insert done on an empty table.
This was caused by a combination of factors:
* MyISAM/Aria temporary tables historically never saved the state
to disk (MYI/MAI), because the state never needed to persist
* certain ALTER TABLE operations modify the original TABLE structure
and if they fail, the original table has to be reopened to
revert all changes (m_needs_reopen=1)
as a result, when ALTER fails and MyISAM/Aria temp table gets reopened,
it reads the stale state from the disk.
As a fix, MyISAM/Aria tables now *always* write the state to disk
on close, *unless* HA_EXTRA_PREPARE_FOR_DROP was done first. And
the server now always does HA_EXTRA_PREPARE_FOR_DROP before dropping
a temporary table.
Part of MDEV-5336 Implement LOCK FOR BACKUP
- Added new locks to MDL_BACKUP for all stages of backup locks and
a new MDL lock needed for backup stages.
- Renamed MDL_BACKUP_STMT to MDL_BACKUP_DDL
- flush_tables() takes a new parameter that decides what should be flushed.
- InnoDB, Aria (transactional tables with checksums), Blackhole, Federated
and Federatedx tables are marked to be safe for online backup. We are
using MDL_BACKUP_TRANS_DML instead of MDL_BACKUP_DML locks for these
which allows any DML's to proceed for these tables during the whole
backup process until BACKUP STAGE COMMIT which will block the final
commit.
Part of MDEV-5336 Implement LOCK FOR BACKUP
The idea is that instead of waiting in close_cached_tables() for all
tables to be closed, we instead call flush_tables() that does:
- Flush not used objects in table cache to free memory
- Collect all tables that are open
- Call HA_EXTRA_FLUSH on the objects, to get them into "closed state"
- Added HA_EXTRA_FLUSH support to archive and CSV
- Added multi-user protection to HA_EXTRA_FLUSH in MyISAM and Aria
The benefit compared to old code is:
- FTWRL doesn't have to wait for long running read operations or
open HANDLER's
main.derived_cond_pushdown: Move all 10.3 tests to the end,
trim trailing white space, and add an "End of 10.3 tests" marker.
Add --sorted_result to tests where the ordering is not deterministic.
main.win_percentile: Add --sorted_result to tests where the
ordering is no longer deterministic.
Two bugs in Aria, related to 2-level fulltext indexes:
* REPAIR calculated the key number incorrectly
* CHECK copied the key into last_key too early and
checking the second-level btree was overwriting it
extra/mariabackup/fil_cur.cc:361:42: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
extra/mariabackup/fil_cur.cc:376:9: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
sql/handler.cc:6196:45: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
sql/log.cc:1681:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/log.cc:1687:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/wsrep_sst.cc:1388:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
sql/wsrep_sst.cc:232:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
storage/connect/filamdbf.cpp:450:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/filamdbf.cpp:970:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/inihandl.cpp:197:16: warning: address of array 'key->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
storage/innobase/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/buf/buf0buf.cc:5085:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/innobase/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/handler/ha_innodb.cc:18685:7: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
storage/innobase/row/row0mysql.cc:3319:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/row/row0mysql.cc:3327:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/maria/ma_norec.c:35:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_norec.c:42:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_test2.c:1009:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/maria/ma_test2.c:1010:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/mroonga/ha_mroonga.cpp:9189:44: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
storage/mroonga/vendor/groonga/lib/expr.c:4987:22: warning: comparison of constant -1 with expression of type 'grn_operator' is always false [-Wtautological-constant-out-of-range-compare]
storage/xtradb/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/buf/buf0buf.cc:5047:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/xtradb/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3324:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3332:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:120:35: warning: format specifies type 'unsigned long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:96:35: note: expanded from macro 'INFO_TAIL'
