Also, some MDEV-11738/MDEV-11581 post-push fixes.
In MariaDB 10.1, there is no fil_space_t::is_being_truncated field,
and the predicates fil_space_t::stop_new_ops and fil_space_t::is_stopping()
are interchangeable. I requested the fil_space_t::is_stopping() to be added
in the review, but some added checks for fil_space_t::stop_new_ops were
not replaced with calls to fil_space_t::is_stopping().
buf_page_decrypt_after_read(): In this low-level I/O operation, we must
look up the tablespace if it exists, even though future I/O operations
have been blocked on it due to a pending DDL operation, such as DROP TABLE
or TRUNCATE TABLE or other table-rebuilding operations (ALTER, OPTIMIZE).
Pass a parameter to fil_space_acquire_low() telling that we are performing
a low-level I/O operation and the fil_space_t::is_stopping() status should
be ignored.
MDEV-11581: Mariadb starts InnoDB encryption threads
when key has not changed or data scrubbing turned off
Background: Key rotation is based on background threads
(innodb-encryption-threads) periodically going through
all tablespaces on fil_system. For each tablespace
current used key version is compared to max key age
(innodb-encryption-rotate-key-age). This process
naturally takes CPU. Similarly, in same time need for
scrubbing is investigated. Currently, key rotation
is fully supported on Amazon AWS key management plugin
only but InnoDB does not have knowledge what key
management plugin is used.
This patch re-purposes innodb-encryption-rotate-key-age=0
to disable key rotation and background data scrubbing.
All new tables are added to special list for key rotation
and key rotation is based on sending a event to
background encryption threads instead of using periodic
checking (i.e. timeout).
fil0fil.cc: Added functions fil_space_acquire_low()
to acquire a tablespace when it could be dropped concurrently.
This function is used from fil_space_acquire() or
fil_space_acquire_silent() that will not print
any messages if we try to acquire space that does not exist.
fil_space_release() to release a acquired tablespace.
fil_space_next() to iterate tablespaces in fil_system
using fil_space_acquire() and fil_space_release().
Similarly, fil_space_keyrotation_next() to iterate new
list fil_system->rotation_list where new tables.
are added if key rotation is disabled.
Removed unnecessary functions fil_get_first_space_safe()
fil_get_next_space_safe()
fil_node_open_file(): After page 0 is read read also
crypt_info if it is not yet read.
btr_scrub_lock_dict_func()
buf_page_check_corrupt()
buf_page_encrypt_before_write()
buf_merge_or_delete_for_page()
lock_print_info_all_transactions()
row_fts_psort_info_init()
row_truncate_table_for_mysql()
row_drop_table_for_mysql()
Use fil_space_acquire()/release() to access fil_space_t.
buf_page_decrypt_after_read():
Use fil_space_get_crypt_data() because at this point
we might not yet have read page 0.
fil0crypt.cc/fil0fil.h: Lot of changes. Pass fil_space_t* directly
to functions needing it and store fil_space_t* to rotation state.
Use fil_space_acquire()/release() when iterating tablespaces
and removed unnecessary is_closing from fil_crypt_t. Use
fil_space_t::is_stopping() to detect when access to
tablespace should be stopped. Removed unnecessary
fil_space_get_crypt_data().
fil_space_create(): Inform key rotation that there could
be something to do if key rotation is disabled and new
table with encryption enabled is created.
Remove unnecessary functions fil_get_first_space_safe()
and fil_get_next_space_safe(). fil_space_acquire()
and fil_space_release() are used instead. Moved
fil_space_get_crypt_data() and fil_space_set_crypt_data()
to fil0crypt.cc.
fsp_header_init(): Acquire fil_space_t*, write crypt_data
and release space.
check_table_options()
Renamed FIL_SPACE_ENCRYPTION_* TO FIL_ENCRYPTION_*
i_s.cc: Added ROTATING_OR_FLUSHING field to
information_schema.innodb_tablespace_encryption
to show current status of key rotation.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
buf_page_is_checksum_valid_crc32()
buf_page_is_checksum_valid_innodb()
buf_page_is_checksum_valid_none():
Use ULINTPF instead of %lu and %u for ib_uint32_t
fil_space_verify_crypt_checksum():
Check that page is really empty if checksum and
LSN are zero.
fil_space_verify_crypt_checksum():
Correct the comment to be more agurate.
buf0buf.h:
Remove unnecessary is_corrupt variable from
buf_page_t structure.
compatibility problems
Pages that are encrypted contain post encryption checksum on
different location that normal checksum fields. Therefore,
we should before decryption check this checksum to avoid
unencrypting corrupted pages. After decryption we can use
traditional checksum check to detect if page is corrupted
or unencryption was done using incorrect key.
Pages that are page compressed do not contain any checksum,
here we need to fist unencrypt, decompress and finally
use tradional checksum check to detect page corruption
or that we used incorrect key in unencryption.
buf0buf.cc: buf_page_is_corrupted() mofified so that
compressed pages are skipped.
buf0buf.h, buf_block_init(), buf_page_init_low():
removed unnecessary page_encrypted, page_compressed,
stored_checksum, valculated_checksum fields from
buf_page_t
buf_page_get_gen(): use new buf_page_check_corrupt() function
to detect corrupted pages.
buf_page_check_corrupt(): If page was not yet decrypted
check if post encryption checksum still matches.
If page is not anymore encrypted, use buf_page_is_corrupted()
traditional checksum method.
If page is detected as corrupted and it is not encrypted
we print corruption message to error log.
If page is still encrypted or it was encrypted and now
corrupted, we will print message that page is
encrypted to error log.
buf_page_io_complete(): use new buf_page_check_corrupt()
function to detect corrupted pages.
buf_page_decrypt_after_read(): Verify post encryption
checksum before tring to decrypt.
fil0crypt.cc: fil_encrypt_buf() verify post encryption
checksum and ind fil_space_decrypt() return true
if we really decrypted the page.
fil_space_verify_crypt_checksum(): rewrite to use
the method used when calculating post encryption
checksum. We also check if post encryption checksum
matches that traditional checksum check does not
match.
fil0fil.ic: Add missed page type encrypted and page
compressed to fil_get_page_type_name()
Note that this change does not yet fix innochecksum tool,
that will be done in separate MDEV.
Fix test failures caused by buf page corruption injection.
at the start 759654123 and the end 0 do not match."
For page compressed and encrypted tables log sequence
number at end is not stored, thus disable this message
for them.
restarting server with encryption and read-only
buf0buf.cc: Temporary slots used in encryption was calculated
by read_threads * write_threads. However, in read-only mode
write_threads is zero. Correct way is to calculate
(read_threads + write_threads) * max pending IO requests.
Reduce the number of calls to encryption_get_key_get_latest_version
when doing key rotation with two different methods:
(1) We need to fetch key information when tablespace not yet
have a encryption information, invalid keys are handled now
differently (see below). There was extra call to detect
if key_id is not found on key rotation.
(2) If key_id is not found from encryption plugin, do not
try fetching new key_version for it as it will fail anyway.
We store return value from encryption_get_key_get_latest_version
call and if it returns ENCRYPTION_KEY_VERSION_INVALID there
is no need to call it again.
buf_block_init(): Initialize buf_page_t::flush_type.
For some reason, Valgrind 3.12.0 would seem to flag some
bits in adjacent bitfields as uninitialized, even though only
the two bits of flush_type were left uninitialized. Initialize
the field to get rid of many warnings.
buf_page_init_low(): Initialize buf_page_t::old.
For some reason, Valgrind 3.12.0 would seem to flag all 32
bits uninitialized when buf_page_init_for_read() invokes
buf_LRU_add_block(bpage, TRUE). This would trigger bogus warnings
for buf_page_t::freed_page_clock being uninitialized.
(The V-bits would later claim that only "old" is initialized
in the 32-bit word.) Perhaps recent compilers
(GCC 6.2.1 and clang 4.0.0) generate more optimized x86_64 code
for bitfield operations, confusing Valgrind?
mach_write_to_1(), mach_write_to_2(), mach_write_to_3():
Rewrite the assertions that ensure that the most significant
bits are zero. Apparently, clang 4.0.0 would optimize expressions
of the form ((n | 0xFF) <= 0x100) to (n <= 0x100). The redundant
0xFF was added in the first place in order to suppress a
Valgrind warning. (Valgrind would warn about comparing uninitialized
values even in the case when the uninitialized bits do not affect
the result of the comparison.)
In InnoDB and XtraDB functions that declare pointer parameters as nonnull,
remove nullness checks, because GCC would optimize them away anyway.
Use #ifdef instead of #if when checking for a configuration flag.
Clang says that left shifts of negative values are undefined.
So, use ~0U instead of ~0 in a number of macros.
Some functions that were defined as UNIV_INLINE were declared as
UNIV_INTERN. Consistently use the same type of linkage.
ibuf_merge_or_delete_for_page() could pass bitmap_page=NULL to
buf_page_print(), conflicting with the __attribute__((nonnull)).
Analysis: Problem is that page is encrypted but encryption information
on page 0 has already being changed.
Fix: If page header contains key_version != 0 and even if based on
current encryption information tablespace is not encrypted we
need to check is page corrupted. If it is not, then we know that
page is not encrypted. If page is corrupted, we need to try to
decrypt it and then compare the stored and calculated checksums
to see is page corrupted or not.
Two problems:
(1) When pushing warning to sql-layer we need to check that thd != NULL
to avoid NULL-pointer reference.
(2) At tablespace key rotation if used key_id is not found from
encryption plugin tablespace should not be rotated.
MDEV-10394: Innodb system table space corrupted
Analysis: After we have read the page in buf_page_io_complete try to
find if the page is encrypted or corrupted. Encryption was determined
by reading FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION field from FIL-header
as a key_version. However, this field is not always zero even when
encryption is not used. Thus, incorrect key_version could lead situation where
decryption is tried to page that is not encrypted.
Fix: We still read key_version information from FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION
field but also check if tablespace has encryption information before trying
encrypt the page.
There was two problems. Firstly, if page in ibuf is encrypted but
decrypt failed we should not allow InnoDB to start because
this means that system tablespace is encrypted and not usable.
Secondly, if page decrypt is detected we should return false
from buf_page_decrypt_after_read.
Analysis: When a page is read from encrypted table and page can't be
decrypted because of bad key (or incorrect encryption algorithm or
method) page was incorrectly left on buffer pool.
Fix: Remove page from buffer pool and from pending IO.
Analysis: Problem was that in fil_read_first_page we do find that
table has encryption information and that encryption service
or used key_id is not available. But, then we just printed
fatal error message that causes above assertion.
Fix: When we open single table tablespace if it has encryption
information (crypt_data) store this crypt data to the table
structure. When we open a table and we find out that tablespace
is not available, check has table a encryption information
and from there is encryption service or used key_id is not available.
If it is, add additional warning for SQL-layer.
