------------------------------------------------------------------------
r3254 | marko | 2008-11-24 18:01:42 +0200 (Mon, 24 Nov 2008) | 4 lines
branches/zip: Note that it is legitimate for a secondary index record not
to be found during purge. This tries to address Issue #129. The comments
were supplied by Heikki.
------------------------------------------------------------------------
r3286 | marko | 2008-11-26 10:00:28 +0200 (Wed, 26 Nov 2008) | 18 lines
branches/zip: row_merge_drop_temp_indexes(): Replace the WHILE 1 with
WHILE 1=1 in the SQL procedure, so that the loop will actually be
entered and temporary indexes be dropped during crash recovery.
Thanks to Sunny Bains for pointing this out.
Tested as follows:
Set a breakpoint in row_merge_rename_indexes.
CREATE TABLE t(a INT)ENGINE=InnoDB;
CREATE INDEX a ON t(a);
-- The breakpoint will be reached. Kill and restart mysqld.
SHOW CREATE TABLE t;
-- This shows the MySQL .frm file, without and index.
CREATE TABLE innodb_table_monitor(a INT)ENGINE=InnoDB;
-- This will dump the InnoDB dictionary to the error log, without the index.
------------------------------------------------------------------------
r3302 | vasil | 2008-11-27 23:26:39 +0200 (Thu, 27 Nov 2008) | 12 lines
branches/zip:
Fix Mantis issue#130 wdl: does not handle 64-bit address
- Change the call from strtoul() to strtoull()
- Change "%16X" to "%16llx" when scanning preferred load address
rb://58
Submitted by: Calvin
Approved by: Marko
------------------------------------------------------------------------
r3303 | vasil | 2008-11-27 23:31:18 +0200 (Thu, 27 Nov 2008) | 10 lines
branches/zip:
* Remove a change from win-plugin/win-plugin.diff about time_t because
MySQL has used VS2005 for building 5.1.30.
* Adjust the line numbers so the patch applies cleanly without fuzz and
offset messages.
Submitted by: Calvin
------------------------------------------------------------------------
r3304 | vasil | 2008-11-27 23:33:48 +0200 (Thu, 27 Nov 2008) | 6 lines
branches/zip:
Non-functional change in win-plugin/win-plugin.diff: fix the file name
before the diff, this is irrelevant but it is nice to be the same as
the file name on the following line.
------------------------------------------------------------------------
r3312 | marko | 2008-11-28 16:18:43 +0200 (Fri, 28 Nov 2008) | 5 lines
branches/zip: row_undo_mod_del_mark_or_remove_sec_low(): Complain if
the secondary index entry cannot be found, and this is not an incomplete
transaction that is being rolled back in crash recovery. The source code
comments were suggested by Heikki.
------------------------------------------------------------------------
------------------------------------------------------------------------
r3036 | marko | 2008-11-12 12:34:30 +0200 (Wed, 12 Nov 2008) | 4 lines
branches/zip: dtuple_validate(): When UNIV_DEBUG_VALGRIND is defined,
rely solely on the UNIV_MEM_ASSERT_RW() check and disable the for loop
that would only cause additional noise.
------------------------------------------------------------------------
r3037 | marko | 2008-11-12 13:52:57 +0200 (Wed, 12 Nov 2008) | 6 lines
branches/zip: row_vers_impl_x_locked_off_kernel(): Remove compilation
warnings about prev_trx_id and vers_del being possibly uninitialized,
by handling the case prev_version == NULL in a single if block.
rb://45 approved by Inaam Rana.
------------------------------------------------------------------------
r3131 | michael | 2008-11-17 14:56:56 +0200 (Mon, 17 Nov 2008) | 9 lines
branches/zip:
rb://53
Improve innodb_supports_xa system variable handling and
reduces the number of retrievals of the value from MySQL.
Approved by: Marko, over IM
------------------------------------------------------------------------
r3132 | michael | 2008-11-17 16:02:01 +0200 (Mon, 17 Nov 2008) | 5 lines
branches/zip: rb://53
Final version of rb://53, fixes the styling of a comment, makes
the definition and the declaration of thd_supports_xa() identical commentwise.
------------------------------------------------------------------------
r3141 | marko | 2008-11-19 16:39:55 +0200 (Wed, 19 Nov 2008) | 1 line
branches/zip: buf_LRU_free_block(): Clarify the function comment.
------------------------------------------------------------------------
r3144 | marko | 2008-11-20 11:39:49 +0200 (Thu, 20 Nov 2008) | 2 lines
branches/zip: rec_get_nth_field_offs_old(): Add UNIV_UNLIKELY hints
to assertion-like tests.
------------------------------------------------------------------------
r3145 | marko | 2008-11-20 12:22:40 +0200 (Thu, 20 Nov 2008) | 20 lines
branches/zip: Always check for "row too large" when executing SQL to create
an index or table. We have to skip this check when loading table definitions
from the data dictionary, because we could otherwise refuse to load old
tables (even uncompressed ones). This addresses Issue #119.
The first "row too large" check was implemented in MySQL 5.0.3
to address MySQL Bug #5682. In the InnoDB Plugin 1.0.2, a more
accurate check was implemented in innodb_strict_mode. We now
make the check unconditional.
dict_create_index_step(): Pass strict=TRUE to dict_index_add_to_cache().
trx_is_strict(), thd_is_strict(): Remove.
innodb-zip.test: Test in innodb_strict_mode=OFF.
innodb_bug36169.test: Ensure that none of the tables can be created.
rb://56 approved by Sunny Bains.
------------------------------------------------------------------------
r3148 | marko | 2008-11-20 13:27:27 +0200 (Thu, 20 Nov 2008) | 3 lines
branches/zip: rec_print_old(), rec_print_comp(): Dump each field in a
separate line, so that the dumps can be read and compared more easily.
------------------------------------------------------------------------
------------------------------------------------------------------------
r2867 | marko | 2008-10-24 10:24:17 +0300 (Fri, 24 Oct 2008) | 2 lines
branches/zip: ChangeLog: Document r2763, r2794, r2683, r2799, r2809, r2866.
------------------------------------------------------------------------
r2869 | vasil | 2008-10-24 11:14:16 +0300 (Fri, 24 Oct 2008) | 4 lines
branches/zip:
White space cleanup in ChangeLog
------------------------------------------------------------------------
r2870 | vasil | 2008-10-24 13:36:14 +0300 (Fri, 24 Oct 2008) | 8 lines
branches/zip:
Remove a statement that causes the innodb-index test to fail.
The change in behavior was introduced in MySQL BZR-r2738.
Suggested by: Marko
------------------------------------------------------------------------
r2871 | vasil | 2008-10-24 13:48:38 +0300 (Fri, 24 Oct 2008) | 5 lines
branches/zip:
Adjust mysql-test/patches/innodb-index.diff after the change to
mysql-test/innodb-index.(test|result) in r2870.
------------------------------------------------------------------------
r2878 | calvin | 2008-10-27 11:05:42 +0200 (Mon, 27 Oct 2008) | 8 lines
branches/zip: port the fix of Bug#19424 - InnoDB: Possibly a memory
overrun of the buffer being freed with 64-bit Microsoft Visual C++.
The changed file:
CMakeLists.txt: Removing Win64 compiler optimizations for all
innodb/mem/* files.
------------------------------------------------------------------------
r2884 | vasil | 2008-10-27 11:48:46 +0200 (Mon, 27 Oct 2008) | 7 lines
branches/zip:
ChangeLog:
Add entry for the fix of Bug#19424 InnoDB: Possibly a memory overrun of
the buffer being freed (64-bit Visual C)
------------------------------------------------------------------------
r2886 | calvin | 2008-10-27 22:39:11 +0200 (Mon, 27 Oct 2008) | 8 lines
branches/zip: This patch is to solve the issue that file handles can
not cross DLL/EXE boundaries on Windows. In builtin InnoDB, it makes
call to MySQL server for creating tmp files. innobase_mysql_tmpfile
is now rewritten for the plugin.
rb://5
Approved by: Marko
------------------------------------------------------------------------
r2887 | calvin | 2008-10-27 22:48:29 +0200 (Mon, 27 Oct 2008) | 44 lines
branches/zip: implement the delayloading of externals for the plugin
on Windows, which includes:
* Load mysqld.map and insert all symbol/address pairs into hash for
quick access
* Resolves all external data variables. The delayloading mechanism
in MSVC does not support automatic imports of data variables.
A workaround is to explicitly handle the data import using the delay
loader during the initialization of the plugin.
* Resolves all external functions during run-time, by implementing
the delayed loading helper function delayLoadHelper2, which is
called by run-time as well as HrLoadAllImportsForDll.
The delay loader reuses the hash implementation in InnoDB. The normal
hash_create (in hash0hash.c) creates hash tables in buffer pool. But
the delay loader is invoked before the engine is initialized, and
buffer pools are not ready yet. Instead, the delay loader has its own
implementation of hash_create() and hash_table_free(), called
wdl_hash_create() and wdl_hash_table_free().
This patch should be used with other two patches in order to build
a dynamically linked plugin on Windows:
* patch for tmpfile functions (r2886)
* patch for "build" files (to be committed)
The list of file changed:
handler/handler0vars.h: new file, defines a list of external data
variables (no external functions).
handler/win_delay_loader.cc: new file, the implementation of the delay
loader for Windows plugin.
handler/ha_innodb.cc: add a header file, and changes for copying the
system variables.
handler/handler0alter.cc: add a header file
handler/i_s.cc: add a header file
rb://27
Reviewed by: Sunny, Marko
Approved by: Sunny
------------------------------------------------------------------------
r2888 | calvin | 2008-10-28 01:51:49 +0200 (Tue, 28 Oct 2008) | 25 lines
branches/zip: for building dynamic plugin on Windows, ha_innodb.dll,
when INNODB_DYNAMIC_PLUGIN is specified.
The changes are:
CMakeLists.txt: add project ha_innodb for dynamic plugin on Windows.
ha_innodb depends on project mysqld.
ha_innodb.def: a new file with standard exports for a dynamic plugin.
Two new files will be added:
* sql/mysqld.def: .def file for 32-bit compiler
* sql/mysqld_x64.def: .def file for x64 compiler
It is also required to apply a patch to the MySQL source tree. The
patch is described in win-plugin/README:
win-plugin/win-plugin.diff - a patch to be applied to MySQL source
tree. When applied, the following files will be modified:
* CMakeLists.txt: add INNODB_DYNAMIC_PLUGIN and _USE_32BIT_TIME_T
* sql/CMakeLists.txt: add mysqld.def or mysqld_x64.def for mysqld
* win/configure.js: add INNODB_DYNAMIC_PLUGIN
* win/build-vs71.bat: provide an option to specify CMAKE_BUILD_TYPE
* win/build-vs8.bat: provide an option to specify CMAKE_BUILD_TYPE
* win/build-vs8_x64.bat: provide an option to specify CMAKE_BUILD_TYPE
------------------------------------------------------------------------
r2894 | marko | 2008-10-28 08:36:39 +0200 (Tue, 28 Oct 2008) | 4 lines
branches/zip: dict_str_starts_with_keyword(): Removed this unused function.
Spotted by Sunny.
------------------------------------------------------------------------
r2895 | vasil | 2008-10-28 08:40:45 +0200 (Tue, 28 Oct 2008) | 6 lines
branches/zip:
ChangeLog:
add entry for the Windows plugin.
------------------------------------------------------------------------
r2917 | marko | 2008-10-28 23:53:23 +0200 (Tue, 28 Oct 2008) | 3 lines
branches/zip: innodb_plugin_init(): Do not copy session variables,
even when the variable is a global variable in the built-in InnoDB.
------------------------------------------------------------------------
r2918 | calvin | 2008-10-29 00:08:11 +0200 (Wed, 29 Oct 2008) | 2 lines
branches/zip: fix a problem introduced in r2917 - dyn is not
initialized. Move the check into for().
------------------------------------------------------------------------
r2922 | calvin | 2008-10-29 08:29:01 +0200 (Wed, 29 Oct 2008) | 16 lines
branches/zip: fix issue #102 - Windows plugin: resolve dbug functions
during run-time.
Implement wrapper functions in the plugin. The plugin will get the
function entries from mysqld.exe during the init, and invoke the
corresponding functions (in mysqld.exe). The list of functions are:
_db_pargs_
_db_doprnt_
_db_enter_
_db_return_
_db_dump_
rb://38
Approved by: Marko
------------------------------------------------------------------------
r2923 | marko | 2008-10-29 09:52:30 +0200 (Wed, 29 Oct 2008) | 1 line
branches/zip: ChangeLog: Mention Bug #27276.
------------------------------------------------------------------------
r2925 | calvin | 2008-10-29 10:09:41 +0200 (Wed, 29 Oct 2008) | 16 lines
branches/zip: change function names in sql/mysqld.def in order
to work with 5.1.29-rc.
In 5.1.29, the following function names are changed:
_hash_init
hash_free
hash_search
hash_delete
changed to
_my_hash_init
my_hash_free
my_hash_search
my_hash_delete
Approved by: Marko (on IM)
------------------------------------------------------------------------
r2927 | marko | 2008-10-29 11:43:23 +0200 (Wed, 29 Oct 2008) | 4 lines
branches/zip: ha_innodb.cc: Make some functions static, so that they will
not be compiled as weak global symbols. These functions must not be
redirected to the built-in InnoDB.
------------------------------------------------------------------------
r2928 | michael | 2008-10-29 19:20:10 +0200 (Wed, 29 Oct 2008) | 4 lines
Remove unnecessary assert
Approved by: Heikki, over IM
------------------------------------------------------------------------
r2930 | marko | 2008-10-29 21:39:24 +0200 (Wed, 29 Oct 2008) | 33 lines
branches/zip: Merge revisions 2854:2929 from branches/5.1,
except r2924, which was merged from branches/zip r2866 to branches/5.1
and except r2879 which was merged separately by Calvin:
------------------------------------------------------------------------
r2902 | vasil | 2008-10-28 12:10:25 +0200 (Tue, 28 Oct 2008) | 10 lines
branches/5.1:
Fix Bug#38189 innodb_stats_on_metadata missing
Make the variable innodb_stats_on_metadata visible to the users and
also settable at runtime. Previously it was only "visible" as a command
line startup option to mysqld.
Approved by: Marko (https://svn.innodb.com/rb/r/36)
------------------------------------------------------------------------
r2929 | marko | 2008-10-29 21:26:14 +0200 (Wed, 29 Oct 2008) | 13 lines
branches/5.1: dtype_get_sql_null_size(): return the correct storage
size of a SQL NULL column. (Bug #40369)
When MySQL Bug #20877 was fixed in r834, this function was
accidentally modified to return 0 or 1. Apparently, the only impact of
this bug is that fixed-length columns cannot be updated in-place from
or to SQL NULL, even in ROW_FORMAT=REDUNDANT. After this fix,
fixed-length columns in ROW_FORMAT=REDUNDANT will have a constant
storage size as they should, no matter if NULL or non-NULL. The bug
caused fixed-length NULL columns to occupy 1 byte.
rb://37 approved by Heikki over IM.
------------------------------------------------------------------------
------------------------------------------------------------------------
r2931 | vasil | 2008-10-29 22:10:40 +0200 (Wed, 29 Oct 2008) | 4 lines
branches/zip:
Add 2 ChangeLog entries for the 2 bugfixes that were merged from branches/5.1.
------------------------------------------------------------------------
r2935 | vasil | 2008-10-30 12:17:23 +0200 (Thu, 30 Oct 2008) | 17 lines
branches/zip:
Fix "Bug#40360 Binlog related errors with binlog off" in InnoDB code in order
to have a Bug#40360-free InnoDB Plugin 1.0.2.
The fix does check whether binary logging is enabled in MySQL by accessing the
opt_bin_log global variable that is defined in sql/mysqld.cc.
In case MySQL does develop another solution to this via Bug#40360 then we can
revert this patch (except the mysql-tests).
The windows-plugin part of this fix will be committed as a separate commit to
ease eventual merge into branches/5.1 [note from the future: the separate
commit went into r2936].
Approved by: Marko (https://svn.innodb.com/rb/r/39)
------------------------------------------------------------------------
r2936 | vasil | 2008-10-30 12:24:09 +0200 (Thu, 30 Oct 2008) | 7 lines
branches/zip:
Followup to r2935: add the Windows Delay Loader stuff for the MySQL
variable that we are accessing. If someday we have another solution for
Bug#40360 Binlog related errors with binlog off
then this should also be reverted.
------------------------------------------------------------------------
r2937 | vasil | 2008-10-30 12:28:47 +0200 (Thu, 30 Oct 2008) | 4 lines
branches/zip:
Add ChangeLog entry for Bug#40360 Binlog related errors with binlog off
------------------------------------------------------------------------
r2938 | vasil | 2008-10-30 12:33:28 +0200 (Thu, 30 Oct 2008) | 5 lines
branches/zip:
Non-functional change: convert handler/handler0vars.h and
handler/win_delay_loader.cc from \r\n (dos) to \n (unix) line terminators.
------------------------------------------------------------------------
r2939 | marko | 2008-10-30 12:38:18 +0200 (Thu, 30 Oct 2008) | 2 lines
branches/zip: Set svn:eol-style native on some recently added text files.
------------------------------------------------------------------------
r2940 | marko | 2008-10-30 12:46:21 +0200 (Thu, 30 Oct 2008) | 1 line
branches/zip: ChangeLog, ha_innodb.def: Set svn:eol-style native
------------------------------------------------------------------------
r2941 | vasil | 2008-10-30 19:34:27 +0200 (Thu, 30 Oct 2008) | 4 lines
branches/zip:
Increment the InnoDB Plugin version from 1.0.1 to 1.0.2.
------------------------------------------------------------------------
r2943 | sunny | 2008-10-31 09:40:29 +0200 (Fri, 31 Oct 2008) | 15 lines
branches/zip:
1. We add a vector of locks to trx_t. This array contains the autoinc
locks granted to a transaction. There is one per table.
2. We enforce releasing of these locks in the reverse order from the
one in which they are acquired. The assumption is that since the
AUTOINC locks are statement level locks. Nested statements introduced
by triggers are stacked it should hold.
There was some cleanup done to the vector code too by adding const and
some new functions. Rename dict_table_t::auto_inc_lock to autoinc_lock.
Fix Bug#26316 Triggers create duplicate entries on auto-increment columns
rb://22
------------------------------------------------------------------------
r2944 | vasil | 2008-10-31 09:44:16 +0200 (Fri, 31 Oct 2008) | 12 lines
branches/zip:
Revert our temporary fix for "Bug#40360 Binlog related errors with binlog off"
(r2935, r2936) and deploy MySQL's one, but put the function
mysql_bin_log_is_engaged() inside mysql_addons.cc instead of in mysql's log.cc
and use a different name for it so there is no collision when MySQL adds this
function in log.cc.
[note from the future: the windows part of this patch went into r2947]
Approved by: Marko (https://svn.innodb.com/rb/r/41/)
------------------------------------------------------------------------
r2945 | sunny | 2008-10-31 09:44:45 +0200 (Fri, 31 Oct 2008) | 2 lines
branches/zip: Update ChangeLog with r2943 info.
------------------------------------------------------------------------
r2946 | marko | 2008-10-31 10:18:47 +0200 (Fri, 31 Oct 2008) | 2 lines
branches/zip: Revert the unintended change to univ.i that was made in r2943.
------------------------------------------------------------------------
r2947 | calvin | 2008-10-31 10:38:26 +0200 (Fri, 31 Oct 2008) | 6 lines
branches/zip: Windows plugin part of r2944
r2944 has reference to mysql_bin_log.is_open(), which is new in InnoDB.
Add two new entries and remove one duplicate in mysqld.def &
mysqld_x64.def.
------------------------------------------------------------------------
r2948 | vasil | 2008-10-31 11:39:07 +0200 (Fri, 31 Oct 2008) | 9 lines
branches/zip:
Fix Mantis issue#106 plugin init error:InnoDB: stats_on_metadata in static
InnoDB (flags=0x2401) differs from stats_on_metadata in dynamic InnoDB (fl
Ignore the NOSYSVAR flag in addition to ignoring the READONLY flag.
Approved by: Marko (https://svn.innodb.com/rb/r/42/)
------------------------------------------------------------------------
r2949 | vasil | 2008-10-31 11:47:56 +0200 (Fri, 31 Oct 2008) | 4 lines
branches/zip:
White-space cleanup in ChangeLog.
------------------------------------------------------------------------
r2951 | marko | 2008-10-31 14:21:43 +0200 (Fri, 31 Oct 2008) | 4 lines
branches/zip: scripts/install_innodb_plugins_win.sql: New script,
for installing the InnoDB plugins in Windows. Copied from
scripts/install_innodb_plugins.sql.
------------------------------------------------------------------------
r2954 | calvin | 2008-11-04 09:15:26 +0200 (Tue, 04 Nov 2008) | 8 lines
branches/zip: ignore the failure when builtin_innobase_plugin is not
available.
External variable builtin_innobase_plugin is not available when mysqld
does not have a builtin InnoDB. The init of the Windows plugin should
not fail in this case.
Approved by: Marko (on IM)
------------------------------------------------------------------------
r2955 | calvin | 2008-11-04 12:43:14 +0200 (Tue, 04 Nov 2008) | 11 lines
branches/zip: windows plugin - fix references to array variables.
This problem surfaced when running new test innodb_bug40360.test. Both
tx_isolation_names and binlog_format_names are name arrays, and
should be defined as wdl_tx_isolation_names and wdl_binlog_format_names,
not *wdl_tx_isolation_names and *wdl_binlog_format_names.
Another array variable is all_charsets, which is already correctly
defined.
Approved by: Marko (on IM)
------------------------------------------------------------------------
r2986 | marko | 2008-11-11 09:28:37 +0200 (Tue, 11 Nov 2008) | 11 lines
branches/zip: ha_innobase::create(): Remove the dependences on
DICT_TF_ZSSIZE_MAX, so that the code can be compiled with a different
uncompressed page size by redefining UNIV_PAGE_SIZE_SHIFT in univ.i.
Currently, the allowed values are 12, 13, or 14 (4k, 8k, 16k).
Make the default compressed page size half the uncompressed page size.
The previous default was 8 kilobytes, which is the same when compiling
with the default 16k uncompressed page size.
rb://50 approved by Pekka Lampio and Sunny Bains.
------------------------------------------------------------------------
------------------------------------------------------------------------
r2838 | vasil | 2008-10-21 12:49:27 +0300 (Tue, 21 Oct 2008) | 61 lines
branches/zip:
Merge 2744:2837 from branches/5.1 (skipping r2782 and r2826):
------------------------------------------------------------------------
r2832 | vasil | 2008-10-21 10:08:30 +0300 (Tue, 21 Oct 2008) | 10 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
In ha_innobase::info():
Replace sql_print_warning() which prints to mysqld error log with
push_warning_printf() which sends the error message to the client.
Suggested by: Marko, Sunny, Michael
Objected by: Inaam
------------------------------------------------------------------------
r2837 | vasil | 2008-10-21 12:07:44 +0300 (Tue, 21 Oct 2008) | 32 lines
Changed paths:
M /branches/5.1/mysql-test/innodb-semi-consistent.result
M /branches/5.1/mysql-test/innodb-semi-consistent.test
M /branches/5.1/mysql-test/innodb.result
M /branches/5.1/mysql-test/innodb.test
branches/5.1:
Merge a change from MySQL (this fixes the failing innodb and
innodb-semi-consistent tests):
revno: 2757
committer: Georgi Kodinov <kgeorge@mysql.com>
branch nick: B39812-5.1-5.1.29-rc
timestamp: Fri 2008-10-03 15:24:19 +0300
message:
Bug #39812: Make statement replication default for 5.1 (to match 5.0)
Make STMT replication default for 5.1.
Add a default of MIXED into the config files
Fix the tests that needed MIXED replication mode.
modified:
mysql-test/include/mix1.inc
mysql-test/r/innodb-semi-consistent.result
mysql-test/r/innodb.result
mysql-test/r/innodb_mysql.result
mysql-test/r/tx_isolation_func.result
mysql-test/t/innodb-semi-consistent.test
mysql-test/t/innodb.test
mysql-test/t/tx_isolation_func.test
sql/mysqld.cc
support-files/my-huge.cnf.sh
support-files/my-innodb-heavy-4G.cnf.sh
support-files/my-large.cnf.sh
support-files/my-medium.cnf.sh
support-files/my-small.cnf.sh
------------------------------------------------------------------------
------------------------------------------------------------------------
r2847 | marko | 2008-10-22 10:07:37 +0300 (Wed, 22 Oct 2008) | 6 lines
branches/zip: page_zip_rec_needs_ext(): Fix a bug that was introduced
in the fix of Mantis issue #73. With key_block_size=16, we will also
have to check the available space on the uncompressed page.
Otherwise, the clustered index record can be almost 16 kilobytes in
size, and the undo log record will not fit.
------------------------------------------------------------------------
r2850 | marko | 2008-10-22 13:52:12 +0300 (Wed, 22 Oct 2008) | 2 lines
branches/zip: ibuf_insert_to_index_page(): Discard the local variable block.
page_cur is always positioned on block, the function parameter.
------------------------------------------------------------------------
r2853 | sunny | 2008-10-23 01:52:09 +0300 (Thu, 23 Oct 2008) | 2 lines
branches/zip: Add missing UNIV_INTERN.
------------------------------------------------------------------------
r2855 | sunny | 2008-10-23 09:29:46 +0300 (Thu, 23 Oct 2008) | 36 lines
branches/zip:
Merge revisions 2837:2852 from branches/5.1:
------------------------------------------------------------------------
r2849 | sunny | 2008-10-22 12:01:18 +0300 (Wed, 22 Oct 2008) | 8 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/row0mysql.h
M /branches/5.1/row/row0mysql.c
branches/5.1: Return the actual error code encountered when allocating
a new autoinc value. The change in behavior (bug) was introduced in 5.1.22
when we introduced the new AUTOINC locking model.
rb://31
Bug#40224 New AUTOINC changes mask reporting of deadlock/timeout errors
------------------------------------------------------------------------
r2852 | sunny | 2008-10-23 01:42:24 +0300 (Thu, 23 Oct 2008) | 9 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/handler/ha_innodb.h
branches/5.1: Backport r2724 from branches/zip
Check column value against the col max value before updating the table's
global autoinc counter value. This is part of simplifying the AUTOINC
sub-system. We extract the type info from MySQL data structures at runtime.
This fixes Bug#37788 InnoDB Plugin: AUTO_INCREMENT wrong for compressed tables
------------------------------------------------------------------------
------------------------------------------------------------------------
r2856 | sunny | 2008-10-23 10:07:05 +0300 (Thu, 23 Oct 2008) | 1 line
Reverting test file changes from r2855
------------------------------------------------------------------------
r2857 | sunny | 2008-10-23 10:24:33 +0300 (Thu, 23 Oct 2008) | 30 lines
branches/zip:
Merge revisions 2852:2854 from branches/5.1:
------------------------------------------------------------------------
r2854 | sunny | 2008-10-23 08:30:32 +0300 (Thu, 23 Oct 2008) | 13 lines
Changed paths:
M /branches/5.1/dict/dict0dict.c
M /branches/5.1/dict/dict0mem.c
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/handler/ha_innodb.h
M /branches/5.1/include/dict0dict.h
M /branches/5.1/include/dict0mem.h
M /branches/5.1/row/row0mysql.c
branches/5.1: Backport changes from branches/zip r2725
Simplify the autoinc initialization code. This removes the
non-determinism related to reading the table's autoinc value for the first
time. This change has also reduced the sizeof dict_table_t by sizeof(ibool)
bytes because we don't need the dict_table_t::autoinc_inited field anymore.
Bug#39830 Table autoinc value not updated on first insert.
Bug#35498 Cannot get table test/table1 auto-inccounter value in ::info
Bug#36411 Failed to read auto-increment value from storage engine" in 5.1.24 auto-inc
rb://16
------------------------------------------------------------------------
------------------------------------------------------------------------
r2858 | vasil | 2008-10-23 11:33:43 +0300 (Thu, 23 Oct 2008) | 4 lines
branches/zip:
Update the ChangeLog
------------------------------------------------------------------------
r2861 | marko | 2008-10-23 12:27:15 +0300 (Thu, 23 Oct 2008) | 24 lines
branches/zip: Clean up the file format stamping.
trx_sys_file_format_max_upgrade(): Rename from
trx_sys_file_format_max_update(). Improve the documentation. Add a
const qualifier to the parameter "name". Replace the parameter
"flags" with "format_id", because this function should deal with file
format identifiers, not with table flags.
trx_sys_file_format_max_write(), trx_sys_file_format_max_set(): Add a
const qualifier to the parameter "name".
ha_innodb.cc: Correct the spelling in some comments: "side effect".
Remove redundant prototypes for some static callback functions.
innodb_file_format_name_update(), innodb_file_format_check_update():
Correct the function signature. Use appropriate pointer type conversions.
MYSQL_SYSVAR_STR(file_format), MYSQL_SYSVAR_STR(file_format_check):
Remove the type conversions from the callback function pointers. When
the function signatures match, no type conversion is needed. The type
conversions would only prevent compilation warnings for any mismatch.
Approved by Sunny in rb://25.
------------------------------------------------------------------------
r2862 | marko | 2008-10-23 12:37:42 +0300 (Thu, 23 Oct 2008) | 8 lines
branches/zip: Non-functional changes:
ibuf_get_volume_buffered(): Declare with static linkage.
This function is private to ibuf0ibuf.c.
btr_cur_pessimistic_delete(): Use the cached result of
btr_cur_get_index(cursor).
------------------------------------------------------------------------
------------------------------------------------------------------------
r2809 | marko | 2008-10-16 09:41:13 +0300 (Thu, 16 Oct 2008) | 18 lines
branches/zip: Skip the undo log size check on REDUNDANT and COMPACT tables.
In ROW_FORMAT=DYNAMIC and ROW_FORMAT=COMPRESSED, column prefix indexes
require that prefixes of externally stored columns be written to the
undo log. This may make the undo log record bigger than the record on
the B-tree page. The maximum size of an undo log record is the page
size. That must be checked for, in dict_index_add_to_cache().
dict_index_add_to_cache(): Skip the undo log size check for REDUNDANT
and COMPACT tables. These tables store prefixes of externally stored
columns locally within the clustered index record. There are no special
considerations for the undo log record size.
innodb-index.test: Ensure that the check exists for ROW_FORMAT=DYNAMIC,
but not for ROW_FORMAT=COMPACT.
This fixes issue #99. rb://28 approved by Sunny.
------------------------------------------------------------------------
r2810 | vasil | 2008-10-16 19:57:58 +0300 (Thu, 16 Oct 2008) | 12 lines
branches/zip:
Fix Mantis issue#61:
In row_undo_ins_parse_undo_rec(): if we find that a table has no indexes
(dict_table_get_first_index() returns NULL) do not try to call
trx_undo_rec_get_row_ref() with a NULL pointer because that would lead to
a crash. Instead, print a warning and set node->table to NULL just like
it is done if the .ibd file is missing.
Approved by: Heikki (via IM)
------------------------------------------------------------------------
r2824 | marko | 2008-10-20 09:58:01 +0300 (Mon, 20 Oct 2008) | 2 lines
branches/zip: rec_convert_dtuple_to_rec_comp(): Relax a too tight assertion.
Spotted by Sunny.
------------------------------------------------------------------------
r2825 | vasil | 2008-10-20 13:41:04 +0300 (Mon, 20 Oct 2008) | 6 lines
branches/zip:
Print the table name via ut_print_name() and add two spaces before InnoDB.
Suggested by: Marko
------------------------------------------------------------------------
r2833 | marko | 2008-10-21 10:16:45 +0300 (Tue, 21 Oct 2008) | 2 lines
branches/zip: ibuf_insert_low(): Avoid unnecessarily
acquiring and releasing ibuf_mutex.
------------------------------------------------------------------------
r2834 | marko | 2008-10-21 10:18:57 +0300 (Tue, 21 Oct 2008) | 1 line
branches/zip: ibuf_delete_rec(): Add debug assertions suggested by Heikki.
------------------------------------------------------------------------
r2835 | marko | 2008-10-21 11:04:06 +0300 (Tue, 21 Oct 2008) | 1 line
branches/zip: ibuf_insert_low(): Simplify a comparison.
------------------------------------------------------------------------
------------------------------------------------------------------------
r2781 | marko | 2008-10-13 13:40:57 +0300 (Mon, 13 Oct 2008) | 1 line
branches/zip: page_cur_delete_rec(): Call page_zip_validate_low().
------------------------------------------------------------------------
r2783 | vasil | 2008-10-13 18:34:34 +0300 (Mon, 13 Oct 2008) | 9 lines
branches/zip:
Remove mysql-test/patches/bug37312.diff because MySQL "fixed"
Bug#37312 by removing the test.
http://bugs.mysql.com/37312http://lists.mysql.com/commits/54462
------------------------------------------------------------------------
r2784 | marko | 2008-10-13 21:35:30 +0300 (Mon, 13 Oct 2008) | 1 line
branches/zip: Add missing NULL check to the assertion added in r2781.
------------------------------------------------------------------------
r2785 | marko | 2008-10-13 22:29:12 +0300 (Mon, 13 Oct 2008) | 2 lines
branches/zip: page_cur_delete_rec(): Remove the bogus page_zip_validate_low()
assertion that was added in r2781 and explain why it was bogus.
------------------------------------------------------------------------
r2786 | calvin | 2008-10-14 19:14:47 +0300 (Tue, 14 Oct 2008) | 7 lines
branches/zip: fix Mantis issue #96 Problem compiling ha_innodb.cc
on 64-bit Windows
Change the definition of srv_replication_delay from ulint to ulong.
ulint is 64-bit on Win64.
Approved by: Heikki (on IM)
------------------------------------------------------------------------
r2787 | calvin | 2008-10-14 19:19:41 +0300 (Tue, 14 Oct 2008) | 7 lines
branches/zip: fix compiler warning
Change the definition of add_on from ulint to ullint, to eliminate
the warning in .\btr\btr0cur.c:
conversion from 'ullint' to 'ulint', possible loss of data
Approved by: Heikki (on IM)
------------------------------------------------------------------------
r2793 | marko | 2008-10-15 10:00:06 +0300 (Wed, 15 Oct 2008) | 2 lines
branches/zip: row_create_table_for_mysql(), row_create_index_for_mysql():
Note that the dictionary object will be freed.
------------------------------------------------------------------------
r2794 | marko | 2008-10-15 10:32:40 +0300 (Wed, 15 Oct 2008) | 9 lines
branches/zip: When invoking page_zip_copy_recs(), update the lock table
and the adaptive hash index. This should fix Issue #95 and Issue #87.
page_zip_copy_recs(): Copy PAGE_MAX_TRX_ID as well, to have similar behavior
to page_copy_rec_list_start() and page_copy_rec_list_end().
btr_root_raise_and_insert(), btr_page_split_and_insert(), btr_lift_page_up():
Update the lock table and the adaptive hash index.
------------------------------------------------------------------------
r2797 | marko | 2008-10-15 13:21:54 +0300 (Wed, 15 Oct 2008) | 3 lines
branches/zip: Introduce UNIV_ZIP_COPY for invoking page_zip_copy_recs()
more often in B-tree operations.
------------------------------------------------------------------------
r2799 | marko | 2008-10-15 14:27:42 +0300 (Wed, 15 Oct 2008) | 25 lines
branches/zip: When the server crashes while freeing an externally stored
column of a compressed table, the BTR_EXTERN_LEN field in the BLOB pointer
will be written as 0. Tolerate this in the functions that deal with
externally stored columns. This fixes Issue #80 and was posted at rb://26.
Note that the clustered index record is always deleted or purged last,
after any secondary index records referring to it have been deleted.
btr_free_externally_stored_field(): On an uncompressed table, zero out
the BTR_EXTERN_LEN, so that half-deleted BLOBs can be detected after
crash recovery.
btr_copy_externally_stored_field_prefix(): Return 0 if the BLOB has been
half-deleted.
row_upd_ext_fetch(): Assert that the externally stored column exists.
row_ext_cache_fill(): Allow btr_copy_externally_stored_field_prefix()
to return 0.
row_sel_sec_rec_is_for_blob(): Return FALSE if the BLOB has been half-deleted.
This is correct, because the clustered index record would have been deleted
or purged last, after any secondary index records referring to it had been
deleted.
------------------------------------------------------------------------
and add assertions to callers. Remove the added ibool* parameter and
return enum row_search_result instead of ibool, to reflect the four
different outcomes: record found, not found, buffered, and status unknown
(record not in the buffer pool).
rb://6
flag to row_search_index_entry() when there are no foreign key
constraints. This flag was accidentally omitted when the delete buffering
was merged from branches/fts in r2324, and thus delete marking was never
buffered.
buf_pool->watch_ fields to start with the common prefix buf_pool_watch,
so that they can be searched easily:
buf_pool_watch_set(): Renamed from buf_pool_add_watch(). The "add" was
misleading, because only one watch can be active at a time.
buf_pool_watch_clear(): Renamed from buf_pool_remove_watch().
buf_pool_watch_occurred(): Renamed from buf_pool_watch_happened().
The followin mysql-tests failed (and they are known to fail):
main.information_schema [ fail ]
main.innodb_file_per_table_basic[ fail ]
main.type_bit_innodb [ fail ]
Tested against : MYSQL_SERVER_VERSION "5.1.28"
symbols. Use it for all definitions of non-static variables and functions.
lexyy.c, make_flex.sh: Declare yylex as UNIV_INTERN, not static. It is
referenced from pars0grm.c.
Actually, according to
nm .libs/ha_innodb.so|grep -w '[ABCE-TVXYZ]'
the following symbols are still global:
* The vtable for class ha_innodb
* pars0grm.c: The function yyparse() and the variables yychar, yylval, yynerrs
The required changes to the Bison-generated file pars0grm.c will be addressed
in a separate commit, which will add a script similar to make_flex.sh.
The class ha_innodb is renamed from class ha_innobase by a #define. Thus,
there will be no clash with the builtin InnoDB. However, there will be some
overhead for invoking virtual methods of class ha_innodb. Ideas for making
the vtable hidden are welcome. -fvisibility=hidden is not available in GCC 3.
to the undo log, also store the original length of the column, so that the
changes will be correctly undone in transaction rollback or when fetching
previous versions of the row.
innodb-zip.test: New file, for tests of the compression.
upd_field_t: Add orig_len, the original length of new_val.
btr_push_update_extern_fields(): Restore the original prefix of the column.
Add the parameter heap where memory will be allocated if necessary.
trx_undo_rec_get_col_val(): Add the output parameter orig_len.
trx_undo_page_report_modify_ext(): New function: Write an externally
stored column to the undo log. This is only called from
trx_undo_page_report_modify(), and this is the only caller of
trx_undo_page_fetch_ext().
trx_undo_update_rec_get_update(): Read the original length of the column
prefix to upd_field->orig_len.
row_sel_get_clust_rec(), return if a previous version of the clustered index
record does not exist in the read view. This bug was made and found by
Heikki. It was harmless as long as the clustered index record contained
a long enough local prefix of externally stored columns, to allow secondary
index records to be built without fetching BLOBs.
InnoDB transactions should never look at a clustered index record whose
transaction identifier (DB_TRX_ID) is not visible in the transaction's
read view.
record is protected by a latch or a lock.
dtuple_copy(): New function: Copy a data tuple.
row_upd_replace(): New function: Apply on a row an update vector that
was built for the clustered index. Set up a cache of externally stored
column prefixes if needed.
undo_node_t: Add the fields undo_row, undo_ext.
row_undo_search_clust_to_pcur(): Initialize undo_row and undo_ext.
row_undo_mod_upd_exist_sec(): Instead of fetching prefixes of
externally stored columns, use the undo_row and undo_ext that were
initialized in row_undo_search_clust_to_pcur().
upd_node_t: Remove the field n_ext. Add the fields upd_row and upd_ext.
row_upd_store_row(): Initialize the upd_row and upd_ext fields of upd_node_t.
row_upd_sec_index_entry(), row_upd_clust_rec_by_insert(): Instead of
fetching prefixes of externally stored columns, use the upd_row
and upd_ext that were initialized in row_upd_store_row().
row_build(), row_upd_index_replace_new_col_vals_index_pos(), and
row_upd_index_replace_new_col_vals() are safe.
btr_cur_optimistic_update(), btr_cur_pessimistic_update(): Note that
the B-tree page of the clustered index record is latched in mtr.
trx_undo_prev_version_build(): Add const qualifiers to index_rec
and rec. Note that the page of index_rec is latched in index_mtr.
row_vers_impl_x_locked_off_kernel(), row_vers_old_has_index_entry():
Note that the stack of versions is locked by mtr and thus it is
safe to call row_build().
btr_rec_copy_externally_stored_field() are safe.
row_merge_copy_blobs(): Note that the table is locked during index creation.
Therefore, none of its BLOBs can be freed.
row_sel_fetch_columns(): Note that rec must be protected by a page latch.
Add const qualifier to rec.
row_sel_get_clust_rec(): Note that the clustered index record is protected
by a page latch that was acquired when the persistent cursor was positioned
and that the latch will be freed by mini-transaction commit.
row_sel_try_search_shortcut(): Check the delete-mark flag before fetching
the columns. Note that the clustered index record is protected
by a page latch that was acquired when the persistent cursor was positioned
and that the latch will be freed by mini-transaction commit.
row_sel(), row_search_for_mysql(): Note that the clustered index record
is protected by a page latch that was acquired when the persistent cursor
was positioned and that the latch will be freed by mini-transaction commit.
row_sel_field_store_in_mysql_format(): Add const qualifier to data.
row_sel_store_mysql_rec(), row_sel_push_cache_row_for_mysql():
Add const qualifier to rec. Note that rec must be protected by a page latch.
be protected from being deleted while any externally stored columns are
being fetched.
row_ext_create(),
row_upd_index_replace_new_col_vals(),
row_upd_index_replace_new_col_vals_index_pos(),
row_sel_sec_rec_is_for_blob(),
row_sel_sec_rec_is_for_clust_rec(): Note that the clustered
index record must be covered by a lock or a page latch.
row_upd_sec_index_entry(), row_upd_clust_rec_by_insert(),
row_undo_mod_upd_exist_sec(): Note that these functions probably
do not obtain an appropriate lock on the clustered index record
before fetching any externally stored columns.
btr_copy_blob_prefix(), btr_copy_externally_stored_field_prefix_low():
Document the return value as "number of bytes written", not "bytes written".
trx_undo_page_fetch_ext(): Explain the assertion ut_a(ext_len).
row_build_index_entry(): Explain the assertion ut_a(!ext).
row_create_index_graph_for_mysql(): Move from row0mysql.c to row0merge.c
and rename to row_merge_create_index_graph(). Also change the function
comment to say that the function will create and execute the query graph
for creating the index.
row_merge_create_index(): Remove redundant assignment to trx->error_state.
Active transactions must not switch table or index definitions on the fly,
for several reasons, including the following:
* copied indexes do not carry any history or locking information;
that is, rollbacks, read views, and record locking would be broken
* huge potential for race conditions, inconsistent reads and writes,
loss of data, and corruption
Instead of trying to track down if the table was changed during a transaction,
acquire appropriate locks that protect the creation and dropping of indexes.
innodb-index.test: Test the locking of CREATE INDEX and DROP INDEX. Test
that consistent reads work across dropped indexes.
lock_rec_insert_check_and_lock(): Relax the lock_table_has() assertion.
When inserting a record into an index, the table must be at least IX-locked.
However, when an index is being created, an IS-lock on the table is
sufficient.
row_merge_lock_table(): Add the parameter enum lock_mode mode, which must
be LOCK_X or LOCK_S.
row_merge_drop_table(): Assert that n_mysql_handles_opened == 0.
Unconditionally drop the table.
ha_innobase::add_index(): Acquire an X or S lock on the table, as appropriate.
After acquiring an X lock, assert that n_mysql_handles_opened == 1.
Remove the comments about dropping tables in the background.
ha_innobase::final_drop_index(): Acquire an X lock on the table.
dict_table_t: Remove version_number, to_be_dropped, and prebuilts.
ins_node_t: Remove table_version_number.
enum lock_mode: Move the definition from lock0lock.h to lock0types.h.
ROW_PREBUILT_OBSOLETE, row_update_prebuilt(), row_prebuilt_table_obsolete():
Remove.
row_prebuilt_t: Remove the declaration from row0types.h.
row_drop_table_for_mysql_no_commit(): Always print a warning if a table
was added to the background drop queue.
value. Document this change in behaviour, and make all callers invoke
the function right after dtuple_create().
dict_create_sys_fields_tuple(): Add a missing "break" statement to the loop
that checks if there are any column prefixes in the index.
row_get_prebuilt_insert_row(): Do not set the fields to the SQL NULL value,
now that dict_table_copy_types() takes care of it.
enough prefixes of externally stored columns, so that purge will not have
to dereference any BLOB pointers, which may be invalid. This will not be
necessary for logging inserts, because inserts are no-ops in purge, and
the record will remain locked during transaction rollback.
TODO: in dict_build_table_def_step() or dict_build_index_def_step(),
prevent the creation of tables with too many columns for which a
prefix index is defined. This is because there is a size limit of undo
log records, and for each prefix-indexed column, the log must store
REC_MAX_INDEX_COL_LEN + BTR_EXTERN_FIELD_REF_SIZE bytes.
trx_undo_page_report_insert(): Assert that the index is clustered.
trx_undo_page_fetch_ext(): New function, for fetching the BLOB prefix
in trx_undo_page_report_modify().
trx_undo_page_report_modify(): Write long enough prefixes of the externally
stored columns to the undo log.
trx_undo_rec_get_partial_row(): Remove the parameter "ext". Assert that
the undo log contains long enough prefixes of the externally stored columns.
purge_node_t: Remove the field "ext".
when row_build() was changed to prefetch all externally stored column
prefixes that occur in ordering fields of an index.
row_build(): Add the parameter col_table for determining which
externally stored columns need to be fetched.
row_merge_read_clustered_index(): Pass new_table as the said parameter,
so that newly added indexes containing column prefix indexes of externally
stored columns will work.
Only add indexed BLOBs to row_ext.
trx_undo_rec_get_partial_row(): Move the BLOB fetching to row_ext_create().
row_build(): Pass only those BLOBs to row_ext_create() that are referenced by
ordering columns of some indexes, similar to trx_undo_rec_get_partial_row().
row_ext_create(): Add the parameter "tuple". Move the implementation
from row0ext.ic to row0ext.c.
row_ext_lookup_ith(), row_ext_lookup(): Return a const pointer. Remove
the parameters "field" and "f_len". Make the row_ext_t* parameter const.
row_ext_t: Remove the field zip_size.
field_ref_zero[]: Declare in btr0types.h instead of btr0cur.h.
row_ext_lookup_low(): Rename to row_ext_cache_fill() and change the
signature.
