The debug configuration parameter innodb_optimistic_insert_debug
which was introduced for testing corner cases in B-tree handling
had a bug in it. The value 1 would trigger an infinite sequence
of page splits.
Fix: When the value 1 is specified, disable this debug feature.
Approved by Yasufumi Kinoshita
The debug configuration parameter innodb_optimistic_insert_debug
which was introduced for testing corner cases in B-tree handling
had a bug in it. The value 1 would trigger an infinite sequence
of page splits.
Fix: When the value 1 is specified, disable this debug feature.
Approved by Yasufumi Kinoshita
dict_set_corrupted(): Use the canonical way of searching for
less-than-equal (PAGE_CUR_LE) and then checking low_match.
The code that was introduced in MySQL 5.5.17 in
Bug#11830883 SUPPORT "CORRUPTED" BIT FOR INNODB TABLES AND INDEXES
could position the cursor on the page supremum, and then attempt
to overwrite non-existing 7th field of the 1-field supremum record.
Approved by Jimmy Yang
dict_set_corrupted(): Use the canonical way of searching for
less-than-equal (PAGE_CUR_LE) and then checking low_match.
The code that was introduced in MySQL 5.5.17 in
Bug#11830883 SUPPORT "CORRUPTED" BIT FOR INNODB TABLES AND INDEXES
could position the cursor on the page supremum, and then attempt
to overwrite non-existing 7th field of the 1-field supremum record.
Approved by Jimmy Yang
some of the tables are created in InnoDB and some tables are created in MyISAM.
We need to create all tables on InnoDB. Fix is to add engine=innodb to the
CREATE TABLE statements.
approved in IM by Marko and Vasil.
some of the tables are created in InnoDB and some tables are created in MyISAM.
We need to create all tables on InnoDB. Fix is to add engine=innodb to the
CREATE TABLE statements.
approved in IM by Marko and Vasil.
The test case waits for other threads to complete, but the wait is only 2
seconds. This is likely to sometimes be too little on our heavily loaded
buildbot VMs, that can easily stall for more than 2 seconds from time to time.
So let's try to increase the timeout (to about 40 seconds) and see if it
helps.
The test case runs SHOW SLAVE HOSTS. The output of this is only stable after
all slaves have had time to register with the master; this happens
asynchroneously.
The test was waiting for the slave with server_id=3 to appear in the output,
but it was missing a similar wait for server_id=2. Thus, if server_id=2 was
much slower to connect for some reason, it could be missing from the output,
causing the test to fail.
innodb_buffer_pool_pages_total depends on page size. On Power8 it is 65k
compared to 4k on Intel. As we round allocations on page size we may get
slightly more memory for buffer pool.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
FROM A FUNCTION
Scenario:
In a stored procedure, CREATE TABLE statement is not allowed. But an
exception is provided for CREATE TEMPORARY TABLE. We can create a temporary
table in a stored procedure.
Let there be two stored functions f1 and f2 and two stored procedures p1 and
p2. Their properties are as follows:
. stored function f1() calls stored procedure p1().
. stored function f2() calls stored procedure p2().
. stored procedure p1() creates temporary table t1.
. stored procedure p2() does DML on t1.
Consider the following situation:
1. Autocommit mode is on.
2. select f1()
3. select f2()
Step 2: In this step, t1 would be created via p1(). A table level transaction
lock would have been taken. The ::external_lock() would not have been called
on this table. At the end of step 2, because of autocommit mode on, this table
level lock will be released.
Step 3: When we execute DML on table t1 via p2() we have two problems:
Problem 1:
The function ha_innobase::external_lock() would have been called but since
it is a select query no table level locks would have been taken. Hence the
following assert will fail:
ut_ad(lock_table_has(thr_get_trx(thr), index->table, LOCK_IX));
Solution:
The solution would be to identify this situation and take a table level lock
and use the proper lock type prebuilt->select_lock_type = LOCK_X for DML
operations.
Problem 2:
Another problem is that in step 3, ha_innobase::open() is never called on
the table t1.
Solution:
The solution would be to identify this situation and call re-init the handler
of table t1.
rb#6429 approved by Krunal.
FROM A FUNCTION
Scenario:
In a stored procedure, CREATE TABLE statement is not allowed. But an
exception is provided for CREATE TEMPORARY TABLE. We can create a temporary
table in a stored procedure.
Let there be two stored functions f1 and f2 and two stored procedures p1 and
p2. Their properties are as follows:
. stored function f1() calls stored procedure p1().
. stored function f2() calls stored procedure p2().
. stored procedure p1() creates temporary table t1.
. stored procedure p2() does DML on t1.
Consider the following situation:
1. Autocommit mode is on.
2. select f1()
3. select f2()
Step 2: In this step, t1 would be created via p1(). A table level transaction
lock would have been taken. The ::external_lock() would not have been called
on this table. At the end of step 2, because of autocommit mode on, this table
level lock will be released.
Step 3: When we execute DML on table t1 via p2() we have two problems:
Problem 1:
The function ha_innobase::external_lock() would have been called but since
it is a select query no table level locks would have been taken. Hence the
following assert will fail:
ut_ad(lock_table_has(thr_get_trx(thr), index->table, LOCK_IX));
Solution:
The solution would be to identify this situation and take a table level lock
and use the proper lock type prebuilt->select_lock_type = LOCK_X for DML
operations.
Problem 2:
Another problem is that in step 3, ha_innobase::open() is never called on
the table t1.
Solution:
The solution would be to identify this situation and call re-init the handler
of table t1.
rb#6429 approved by Krunal.
Problem:
Creation of a table fails when innodb_strict_mode is enabled, but the same
table is created without any warning when innodb_strict_mode is enabled.
Solution:
If creation of a table fails with an error when innodb_strict_mode is
enabled, it must issue a warning when innodb_strict_mode is disabled.
rb#6723 approved by Krunal.
Problem:
Creation of a table fails when innodb_strict_mode is enabled, but the same
table is created without any warning when innodb_strict_mode is enabled.
Solution:
If creation of a table fails with an error when innodb_strict_mode is
enabled, it must issue a warning when innodb_strict_mode is disabled.
rb#6723 approved by Krunal.
Problem:
We maintain two rb trees in each dict_table_t. The foreign_rbt must be in
sync with foreign_list. The referenced_rbt must be in sync with
referenced_list. There is one function which checks this consistency and it
failed, resulting in an assert failure.
The root cause of the problem was identified that the search order was
lost in the referenced_rbt. This is because while renaming the table,
we didn't not refresh this referenced_rbt.
Solution:
When a foreign key is renamed, we must delete and re-insert into both
foreign_rbt and referenced_rbt.
rb#6412 approved by Jimmy.
Problem:
We maintain two rb trees in each dict_table_t. The foreign_rbt must be in
sync with foreign_list. The referenced_rbt must be in sync with
referenced_list. There is one function which checks this consistency and it
failed, resulting in an assert failure.
The root cause of the problem was identified that the search order was
lost in the referenced_rbt. This is because while renaming the table,
we didn't not refresh this referenced_rbt.
Solution:
When a foreign key is renamed, we must delete and re-insert into both
foreign_rbt and referenced_rbt.
rb#6412 approved by Jimmy.
sporadically
Fix: Modify test to be smaller so that testcase timeout does not
trigger. We already have a test for --big-test setup
(innodb.innodb_simulate_comp_failures).
