srv_purge_should_exit(): Remove the parameter n_purged.
If we happened to have n_purged==0 while some transaction was still
active, and then that transaction was added to the history list,
we were prematurely stopping the purge. It is more appropriate to
first check for trx_sys.any_active_transactions() == 0
(this count can only decrease during shutdown) and then for
trx_sys.history_size() == 0 (that count typically decreases, but
can increase when any remaining active transactions are committed
or rolled back).
innodb.dml_purge: Remove a server restart, and explicitly wait for
purge, and use FLUSH TABLE FOR EXPORT to read the file contents.
This will make the test run faster, easier to debug, and also
allow it to run with --embedded. This might also help repeat
MDEV-11802 better. The issue MDEV-13603 remains will remain tested
by innodb.table_flags.
purge_sys_t::n_submitted: Document that it is only accessed by
srv_purge_coordinator_thread.
purge_sys_t::n_completed: Exclusively use my_atomic access.
srv_task_execute(): Simplify the code.
srv_purge_coordinator_thread(): Test the cheaper condition first.
trx_purge(): Atomically access purge_sys.n_completed.
Remove some code duplication.
trx_purge_wait_for_workers_to_complete(): Atomically access
purge_sys.n_completed. Remove an unnecessary local variable.
trx_purge_stop(): Remove a redundant assignment.
buf_flush_remove(): Disable the output for now, because we
certainly do not want this after every page flush on shutdown.
It must be rate-limited somehow. There already is a timeout
extension for waiting the page cleaner to exit in
logs_empty_and_mark_files_at_shutdown().
log_write_up_to(): Use correct format.
srv_purge_should_exit(): Move the timeout extension to the
appropriate place, from one of the callers.
Use systemd EXTEND_TIMEOUT_USEC to advise systemd of progress
Move towards progress measures rather than pure time based measures.
Progress reporting at numberious shutdown/startup locations incuding:
* For innodb_fast_shutdown=0 trx_roll_must_shutdown() for rolling back incomplete transactions.
* For merging the change buffer (in srv_shutdown(bool ibuf_merge))
* For purging history, srv_do_purge
Thanks Marko for feedback and suggestions.
Add fil_system_t::sys_space, fil_system_t::temp_space.
These will replace lookups for TRX_SYS_SPACE or SRV_TMP_SPACE_ID.
mtr_t::m_undo_space, mtr_t::m_sys_space: Remove.
mtr_t::set_sys_modified(): Remove.
fil_space_get_type(), fil_space_get_n_reserved_extents(): Remove.
fsp_header_get_tablespace_size(), fsp_header_inc_size():
Merge to the only caller, innobase_start_or_create_for_mysql().
There is only one lock_sys. Allocate it statically in order to avoid
dereferencing a pointer whenever accessing it. Also, align some
members to their own cache line in order to avoid false sharing.
lock_sys_t::create(): The deferred constructor.
lock_sys_t::close(): The early destructor.
There is only one purge_sys. Allocate it statically in order to avoid
dereferencing a pointer whenever accessing it. Also, align some
members to their own cache line in order to avoid false sharing.
purge_sys_t::create(): The deferred constructor.
purge_sys_t::close(): The early destructor.
undo::Truncate::create(): The deferred constructor.
Because purge_sys.undo_trunc is constructed before the start-up
parameters are parsed, the normal constructor would copy a
wrong value of srv_purge_rseg_truncate_frequency.
TrxUndoRsegsIterator: Do not forward-declare an inline constructor,
because the static construction of purge_sys.rseg_iter would not have
access to it.
trx_purge(): Remove the parameter limit or batch_size, which is
always passed as srv_purge_batch_size.
trx_purge_attach_undo_recs(): Remove the parameters purge_sys, batch_size.
Refer to srv_purge_batch_size.
trx_purge_wait_for_workers_to_complete(): Remove the parameter purge_sys.
Add innodb debug system variable, innodb_buffer_pool_load_pages_abort, to test
the behaviour of innodb_buffer_pool_load_incomplete.
(innodb_buufer_pool_dump_abort_loads.test)
trx_sys_t::rseg_history_len: Make private, and clarify the
documentation.
trx_sys_t::history_size(): Read rseg_history_len.
trx_sys_t::history_insert(), trx_sys_t::history_remove(),
trx_sys_t::history_add(): Update rseg_history_len.
The merge omitted some InnoDB and XtraDB conflict resolutions,
most notably, failing to merge the fix of MDEV-12173.
ibuf_merge_or_delete_for_page(), lock_rec_block_validate():
Invoke fil_space_acquire_silent() instead of fil_space_acquire().
This fixes MDEV-12173.
wsrep_debug, wsrep_trx_is_aborting(): Removed unused declarations.
_fil_io(): Remove. Instead, declare default parameters for the XtraDB
fil_io().
buf_read_page_low(): Declare default parameters, and clean up some
callers.
os_aio(): Correct the macro that is defined when !UNIV_PFS_IO.
With trx_sys_t::rw_trx_ids removal, MVCC snapshot overhead became
slightly higher. That is instead of copying an array we now have to
iterate LF_HASH. All this done under trx_sys.mutex protection.
This patch moves MVCC snapshot out of trx_sys.mutex.
Clean-ups:
Removed MVCC: doesn't make too much sense to keep it in a separate class
anymore.
Refactored ReadView so that it now calls register()/deregister() routines
(it was vice versa before).
ReadView doesn't have friends anymore. :(
Even less trx_sys.mutex references.
There is only one transaction system object in InnoDB.
Allocate the storage for it at link time, not at runtime.
lock_rec_fetch_page(): Use the correct fetch mode BUF_GET.
Pages may never be deallocated from a tablespace while
record locks are pointing to them.
row_quiesce_table_start(), row_quiesce_table_complete():
Use the more appropriate predicate srv_undo_sources for skipping
purge control. (This change alone is insufficient; it is possible
that this predicate will change during the call to trx_purge_stop()
or trx_purge_run().)
trx_purge_stop(), trx_purge_run(): Tolerate PURGE_STATE_EXIT.
It is very well possible to initiate shutdown soon after the statement
FLUSH TABLES FOR EXPORT has been submitted to execution.
srv_purge_coordinator_thread(): Ensure that the wait for purge_sys->event
in trx_purge_stop() will terminate when the coordinator thread exits.
ha_print_info(): Remove.
srv_printf_innodb_monitor(): Do not acquire btr_search_latches[]
Add the equivalent functionality that was part of the non-debug
version of ha_print_info().
Starting with MySQL 5.7 (or MariaDB 10.2.2) InnoDB no longer contains
the "table monitor" or "tablespace monitor". The conditions on
srv_print_innodb_tablespace_monitor, srv_print_innodb_table_monitor
never hold. So, the code was dead.
Also, remove a bogus reference to dict_print(), which used to implement
the InnoDB table monitor.
srv_purge_wakeup(): If thd_destructor_proxy has initiated the first
step of shutdown, ensure that all purge threads terminate.
logs_empty_and_mark_files_at_shutdown(): Add a debug assertion.
(The purge threads should have been shut down already before this step.)
Replace all references in InnoDB and XtraDB error log messages
to bugs.mysql.com with references to https://jira.mariadb.org/.
The original merge
commit 4274d0bf57
was accidentally reverted by the subsequent merge
commit 3b35d745c3
This should also fix the MariaDB 10.2.2 bug
MDEV-13826 CREATE FULLTEXT INDEX on encrypted table fails.
MDEV-12634 FIXME: Modify innodb-index-online, innodb-table-online
so that they will write and read merge sort files. InnoDB 5.7
introduced some optimizations to avoid using the files for small tables.
Many collation test results have been adjusted for MDEV-10191.
…porary file
Fixed by removing writing key version to start of every block that
was encrypted. Instead we will use single key version from log_sys
crypt info.
After this MDEV also blocks writen to row log are encrypted and blocks
read from row log aren decrypted if encryption is configured for the
table.
innodb_status_variables[], struct srv_stats_t
Added status variables for merge block and row log block
encryption and decryption amounts.
Removed ROW_MERGE_RESERVE_SIZE define.
row_merge_fts_doc_tokenize
Remove ROW_MERGE_RESERVE_SIZE
row_log_t
Add index, crypt_tail, crypt_head to be used in case of
encryption.
row_log_online_op, row_log_table_close_func
Before writing a block encrypt it if encryption is enabled
row_log_table_apply_ops, row_log_apply_ops
After reading a block decrypt it if encryption is enabled
row_log_allocate
Allocate temporary buffers crypt_head and crypt_tail
if needed.
row_log_free
Free temporary buffers crypt_head and crypt_tail if they
exist.
row_merge_encrypt_buf, row_merge_decrypt_buf
Removed.
row_merge_buf_create, row_merge_buf_write
Remove ROW_MERGE_RESERVE_SIZE
row_merge_build_indexes
Allocate temporary buffer used in decryption and encryption
if needed.
log_tmp_blocks_crypt, log_tmp_block_encrypt, log_temp_block_decrypt
New functions used in block encryption and decryption
log_tmp_is_encrypted
New function to check is encryption enabled.
Added test case innodb-rowlog to force creating a row log and
verify that operations are done using introduced status
variables.
