Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
Statements with CONNECTION_ID were forced to be kept in the transactional
cache and by consequence non-transactional changes that were supposed to
be flushed ahead of the transaction were kept in the transactional cache.
This happened because after BUG#51894 any statement whose thd's
thread_specific_used was set was kept in the transactional cache. The idea
was to keep changes on temporary tables in the transactional cache. However,
the thread_specific_used was set not only for statements that accessed
temporary tables but also when the CONNECTION_ID was used.
To fix the problem, we created a new variable to keep track of updates
to temporary tables.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
debug_max
There was a buffer overrun when unpacking the date
field. Incidentaly, this seems to affect only solaris x86_64
debug builds, but others platforms may be vulnerable as well.
In particular, the buffer size used was not taking into
consideration that the '\0' character would be written into
it.
We fix this by increasing the size of the buffer used to
accommodate one extra byte (the one for the '\0').
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
When mysqlbinlog was given the --database=X flag, it always printed
'ROLLBACK TO', but the corresponding 'SAVEPOINT' statement was not
printed. The replicated filter(replicated-do/ignore-db) and binlog
filter (binlog-do/ignore-db) has the same problem. They are solved
in this patch together.
After this patch, We always check whether the query is 'SAVEPOINT'
statement or not. Because this is a literal check, 'SAVEPOINT' and
'ROLLBACK TO' statements are also binlogged in uppercase with no
any comments.
The binlog before this patch can be handled correctly except one case
that any comments are in front of the keywords. for example:
/* bla bla */ SAVEPOINT a;
/* bla bla */ ROLLBACK TO a;
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/subselect.result
Text conflict in mysql-test/r/subselect3.result
Text conflict in mysql-test/r/type_datetime.result
Text conflict in sql/share/Makefile.am
Attempts to execute RESET statements within a transaction that
had acquired metadata locks, led to an assertion failure on
debug servers. This bug didn't cause any problems on release
builds.
The triggered assert is designed to check that caches are not
flushed or reset while having active transactions. It is triggered
if acquired metadata locks exist that are not from LOCK TABLE or
HANDLER statements.
In this case it was triggered by RESET QUERY CACHE while having
an active transaction that had acquired locks. The reason the
assertion was triggered, was that RESET statements, unlike the
similar FLUSH statements, was not causing an implicit commit.
This patch fixes the problem by making sure RESET statements
commit the current transaction before executing. The commit
causes acquired metadata locks to be released, preventing the
assertion from being triggered.
Incompatible change: This patch changes RESET statements so
that they cause an implicit commit.
Test case added to query_cache.test.
This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
I found three issues during the analysis:
1. Memory leak caused by temp_buf not being freed;
2. Memory leak caused when handling argv;
3. Conditional jump that depended on unitialized values.
Issue #1
--------
DESCRIPTION: when mysqlbinlog is reading from a remote location
the event temp_buf references the incoming stream (in NET
object), which is not freed by mysqlbinlog explicitly. On the
other hand, when it is reading local binary log, it points to a
temporary buffer that needs to be explicitly freed. For both
cases, the temp_buf was not freed by mysqlbinlog, instead was
set to 0. This clearly disregards the free required in the
second case, thence creating a memory leak.
FIX: we make temp_buf to be conditionally freed depending on
the value of remote_opt. Found out that similar fix is already
in most recent codebases.
Issue #2
--------
DESCRIPTION: load_defaults is called by parse_args, and it
reads default options from configuration files and put them
BEFORE the arguments that are already in argc and argv. This is
done resorting to MEM_ROOT. However, parse_args calls
handle_options immediately after which changes argv. Later when
freeing the defaults, pointers to MEM_ROOT won't match, causing
the memory not to be freed:
void free_defaults(char **argv)
{
MEM_ROOT ptr
memcpy_fixed((char*) &ptr,(char *) argv - sizeof(ptr), sizeof(ptr));
free_root(&ptr,MYF(0));
}
FIX: we remove load_defaults from parse_args and call it
before. Then we save argv with defaults in defaults_argv BEFORE
calling parse_args (which inside can then call handle_options
at will). Actually, found out that this is in fact kind of a
backport for BUG#38468 into 5.1, so I merged in the test case
as well and added error check for load_defaults call.
Fix based on:
revid:zhenxing.he@sun.com-20091002081840-uv26f0flw4uvo33y
Issue #3
--------
DESCRIPTION: the structure st_print_event_info constructor
would not initialize the sql_mode member, although it did for
sql_mode_inited (set to false). This would later raise the
warning in valgrind when printing the sql_mode in the event
header, as this print out is protected by a check against
sql_mode_inited and sql_mode variables. Given that sql_mode was
not initialized valgrind would output the warning.
FIX: we add initialization of sql_mode to the
st_print_event_info constructor.
--slave-load-tm
The MDL_SHARED lock was introduced for an object in 5.4, but the 'TABLE_LIST'
object was not initialized with the MDL_SHARED lock when applying event with
LOAD DATA INFILE into table. So the failure is caused when checking the
MDL_SHARED lock for the object.
To fix the problem, the 'TABLE_LIST' object was initialized with the MDL_SHARED
lock when applying event with LOAD DATA INFILE into table.
--slave-load-tm
The MDL_SHARED lock was introduced for an object in 5.4, but the 'TABLE_LIST'
object was not initialized with the MDL_SHARED lock when applying event with
LOAD DATA INFILE into table. So the failure is caused when checking the
MDL_SHARED lock for the object.
To fix the problem, the 'TABLE_LIST' object was initialized with the MDL_SHARED
lock when applying event with LOAD DATA INFILE into table.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_slow_query_log.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/options.cc
Text conflict in sql/mysqld.cc
into slow log
While processing a statement, down the mysql_parse execution
stack, the thd->enable_slow_log can be assigned to
opt_log_slow_admin_statements, depending whether one is executing
administrative statements, such as ALTER TABLE, OPTIMIZE,
ANALYZE, etc, or not. This can have an impact on slow logging for
statements that are executed after an administrative statement
execution is completed.
When executing statements directly from the user this is fine
because, the thd->enable_slow_log is reset right at the beginning
of the dispatch_command function, ie, everytime a new statement
is set is set to execute.
On the other hand, for slave SQL thread (sql_thd) the story is a
bit different. When in SBR the sql_thd applies statements by
calling mysql_parse. Right after, it calls log_slow_statement
function to log them if they take too long. Calling mysql_parse
directly is fine, but also means that dispatch_command function
is bypassed. As a consequence, thd->enable_slow_log does not get
a chance to be reset before the next statement to be executed by
the sql_thd. If the statement just executed by the sql_thd was an
administrative statement and logging of admin statements was
disabled, this means that sql_thd->enable_slow_log will be set to
0 (disabled) from that moment on. End result: sql_thd stops
logging slow statements.
We fix this by resetting the value of sql_thd->enable_slow_log to
the value of opt_log_slow_slave_statements right after
log_slow_stement is called by the sql_thd.
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Fix Bug#50555 "handler commands crash server in my_hash_first()"
as a post-merge fix (the new handler tests are not passing
otherwise).
- in hash.c, don't call calc_hash if ! my_hash_inited().
- add tests and results for the test case for Bug#50555
Rename method as to not hide a base.
Reorder attributes initialization.
Remove unused variable.
Rework code to silence a warning due to assignment used as truth value.
When replicating from 4.1 master to 5.0 slave START SLAVE UNTIL can stop too late.
The necessary in calculating of the beginning of an event the event's length
did not correspond to the master's genuine information at the event's execution time.
That piece of info was changed at the event's relay-logging due to binlog_version<4 event
conversion by IO thread.
Fixed with storing the master genuine Query_log_event size into a new status
variable at relay-logging of the event. The stored info is extacted at the event
execution and participate further to caclulate the correct start position of the event
in the until-pos stopping routine.
The new status variable's algorithm will be only active when the event comes
from the master of version < 5.0 (binlog_version < 4).
