This was caused by the short_option_1-master.opt file that had the
option -T12, which means (among other things) to use blocking for
sockets. This was supported up to MariaDB 10.4, but not in 10.5 where
we removed the code that changes blocking sockets to non blocking in
case of errors.
Fixed by ignoring the TEST_BLOCKING flag and also by not using the -T12
argument in short_option_1.
Other things:
- Added back support for valgrind (the original issue had nothing to
do with valgrind).
- While debugging I noticed that the retry loop in
handle_connections_sockets() was doing a lot of work during shutdown.
Fixed by not doing retrys during shutdown.
This is a backport of commit 4489a89c71
in order to remove the test innodb.redo_log_during_checkpoint
that would cause trouble in the DBUG subsystem invoked by
safe_mutex_lock() via log_checkpoint(). Before
commit 7cffb5f6e8
these mutexes were of different type.
The following options were introduced in
commit 2e814d4702 (mariadb-10.2.2)
and have little use:
innodb_disable_resize_buffer_pool_debug had no effect even in
MariaDB 10.2.2 or MySQL 5.7.9. It was introduced in
mysql/mysql-server@5c4094cf49
to work around a problem that was fixed in
mysql/mysql-server@2957ae4f99
(but the parameter was not removed).
innodb_page_cleaner_disabled_debug and innodb_master_thread_disabled_debug
are only used by the test innodb.redo_log_during_checkpoint
that will be removed as part of this commit.
innodb_dict_stats_disabled_debug is only used by that test,
and it is redundant because one could simply use
innodb_stats_persistent=OFF or the STATS_PERSISTENT=0 attribute
of the table in the test to achieve the same effect.
The call mtr.add_suppression() that was added
in commit 75b7cd680b
for MemorySanitizer and Valgrind runs is causing
a result difference for the test rpl.rpl_gtid_stop_start.
Let us disable the binlog for executing that statement.
Also, the test perfschema.statement_program_lost_inst
would fail due to the changes to have_innodb.inc in this commit.
To compensate for that, we will make more --suite=perfschema
tests run without InnoDB, and explicitly enable InnoDB in
those tests that depend on a transactional storage engine.
Improve documentation of performance_schema tables by appending COLUMN
comments to tables. Additionally improve test coverage and update corresponding
tests.
This is part of the patch covering newer columns and tables in 10.5.
Improve documentation of performance_schema tables by appending COLUMN
comments to tables. Additionally improve test coverage and update corresponding
tests.
report correct error codes in ed25519.
Invalid value stored in the user table or an OpenSSL error is CR_ERROR.
When a user provided incorrect password when logging in -
it's CR_AUTH_USER_CREDENTIALS.
The table performance_schema.events_transactions_history_long that
was imported from MySQL 5.7.28 in
commit 0ea717f51a
may report bogus trx_id values for InnoDB transactions.
innobase_register_trx(): Pass trx->id to trans_register_ha(),
even if it is 0. It is more appropriate to report NULL than some
arbitrary value that has been constructed from the address of a
transaction identifier.
We always defined PFS_SKIP_BUFFER_MUTEX_RWLOCK, that is,
the latches of the buffer pool blocks were never instrumented
in PERFORMANCE_SCHEMA.
For some reason, the debug_latch (which enforce proper usage of
buffer-fixing in debug builds) was instrumented.
The buffer pool refactoring in MDEV-15053 and MDEV-22871 shifted
the performance bottleneck to the page flushing.
The configuration parameters will be changed as follows:
innodb_lru_flush_size=32 (new: how many pages to flush on LRU eviction)
innodb_lru_scan_depth=1536 (old: 1024)
innodb_max_dirty_pages_pct=90 (old: 75)
innodb_max_dirty_pages_pct_lwm=75 (old: 0)
Note: The parameter innodb_lru_scan_depth will only affect LRU
eviction of buffer pool pages when a new page is being allocated. The
page cleaner thread will no longer evict any pages. It used to
guarantee that some pages will remain free in the buffer pool. Now, we
perform that eviction 'on demand' in buf_LRU_get_free_block().
The parameter innodb_lru_scan_depth(srv_LRU_scan_depth) is used as follows:
* When the buffer pool is being shrunk in buf_pool_t::withdraw_blocks()
* As a buf_pool.free limit in buf_LRU_list_batch() for terminating
the flushing that is initiated e.g., by buf_LRU_get_free_block()
The parameter also used to serve as an initial limit for unzip_LRU
eviction (evicting uncompressed page frames while retaining
ROW_FORMAT=COMPRESSED pages), but now we will use a hard-coded limit
of 100 or unlimited for invoking buf_LRU_scan_and_free_block().
The status variables will be changed as follows:
innodb_buffer_pool_pages_flushed: This includes also the count of
innodb_buffer_pool_pages_LRU_flushed and should work reliably,
updated one by one in buf_flush_page() to give more real-time
statistics. The function buf_flush_stats(), which we are removing,
was not called in every code path. For both counters, we will use
regular variables that are incremented in a critical section of
buf_pool.mutex. Note that show_innodb_vars() directly links to the
variables, and reads of the counters will *not* be protected by
buf_pool.mutex, so you cannot get a consistent snapshot of both variables.
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be
removed, because the page cleaner no longer deals with writing or
evicting least recently used pages, and because the single-page writes
have been removed:
* buffer_LRU_batch_flush_avg_time_slot
* buffer_LRU_batch_flush_avg_time_thread
* buffer_LRU_batch_flush_avg_time_est
* buffer_LRU_batch_flush_avg_pass
* buffer_LRU_single_flush_scanned
* buffer_LRU_single_flush_num_scan
* buffer_LRU_single_flush_scanned_per_call
When moving to a single buffer pool instance in MDEV-15058, we missed
some opportunity to simplify the buf_flush_page_cleaner thread. It was
unnecessarily using a mutex and some complex data structures, even
though we always have a single page cleaner thread.
Furthermore, the buf_flush_page_cleaner thread had separate 'recovery'
and 'shutdown' modes where it was waiting to be triggered by some
other thread, adding unnecessary latency and potential for hangs in
relatively rarely executed startup or shutdown code.
The page cleaner was also running two kinds of batches in an
interleaved fashion: "LRU flush" (writing out some least recently used
pages and evicting them on write completion) and the normal batches
that aim to increase the MIN(oldest_modification) in the buffer pool,
to help the log checkpoint advance.
The buf_pool.flush_list flushing was being blocked by
buf_block_t::lock for no good reason. Furthermore, if the FIL_PAGE_LSN
of a page is ahead of log_sys.get_flushed_lsn(), that is, what has
been persistently written to the redo log, we would trigger a log
flush and then resume the page flushing. This would unnecessarily
limit the performance of the page cleaner thread and trigger the
infamous messages "InnoDB: page_cleaner: 1000ms intended loop took 4450ms.
The settings might not be optimal" that were suppressed in
commit d1ab89037a unless log_warnings>2.
Our revised algorithm will make log_sys.get_flushed_lsn() advance at
the start of buf_flush_lists(), and then execute a 'best effort' to
write out all pages. The flush batches will skip pages that were modified
since the log was written, or are are currently exclusively locked.
The MDEV-13670 message "page_cleaner: 1000ms intended loop took" message
will be removed, because by design, the buf_flush_page_cleaner() should
not be blocked during a batch for extended periods of time.
We will remove the single-page flushing altogether. Related to this,
the debug parameter innodb_doublewrite_batch_size will be removed,
because all of the doublewrite buffer will be used for flushing
batches. If a page needs to be evicted from the buffer pool and all
100 least recently used pages in the buffer pool have unflushed
changes, buf_LRU_get_free_block() will execute buf_flush_lists() to
write out and evict innodb_lru_flush_size pages. At most one thread
will execute buf_flush_lists() in buf_LRU_get_free_block(); other
threads will wait for that LRU flushing batch to finish.
To improve concurrency, we will replace the InnoDB ib_mutex_t and
os_event_t native mutexes and condition variables in this area of code.
Most notably, this means that the buffer pool mutex (buf_pool.mutex)
is no longer instrumented via any InnoDB interfaces. It will continue
to be instrumented via PERFORMANCE_SCHEMA.
For now, both buf_pool.flush_list_mutex and buf_pool.mutex will be
declared with MY_MUTEX_INIT_FAST (PTHREAD_MUTEX_ADAPTIVE_NP). The critical
sections of buf_pool.flush_list_mutex should be shorter than those for
buf_pool.mutex, because in the worst case, they cover a linear scan of
buf_pool.flush_list, while the worst case of a critical section of
buf_pool.mutex covers a linear scan of the potentially much longer
buf_pool.LRU list.
mysql_mutex_is_owner(), safe_mutex_is_owner(): New predicate, usable
with SAFE_MUTEX. Some InnoDB debug assertions need this predicate
instead of mysql_mutex_assert_owner() or mysql_mutex_assert_not_owner().
buf_pool_t::n_flush_LRU, buf_pool_t::n_flush_list:
Replaces buf_pool_t::init_flush[] and buf_pool_t::n_flush[].
The number of active flush operations.
buf_pool_t::mutex, buf_pool_t::flush_list_mutex: Use mysql_mutex_t
instead of ib_mutex_t, to have native mutexes with PERFORMANCE_SCHEMA
and SAFE_MUTEX instrumentation.
buf_pool_t::done_flush_LRU: Condition variable for !n_flush_LRU.
buf_pool_t::done_flush_list: Condition variable for !n_flush_list.
buf_pool_t::do_flush_list: Condition variable to wake up the
buf_flush_page_cleaner when a log checkpoint needs to be written
or the server is being shut down. Replaces buf_flush_event.
We will keep using timed waits (the page cleaner thread will wake
_at least_ once per second), because the calculations for
innodb_adaptive_flushing depend on fixed time intervals.
buf_dblwr: Allocate statically, and move all code to member functions.
Use a native mutex and condition variable. Remove code to deal with
single-page flushing.
buf_dblwr_check_block(): Make the check debug-only. We were spending
a significant amount of execution time in page_simple_validate_new().
flush_counters_t::unzip_LRU_evicted: Remove.
IORequest: Make more members const. FIXME: m_fil_node should be removed.
buf_flush_sync_lsn: Protect by std::atomic, not page_cleaner.mutex
(which we are removing).
page_cleaner_slot_t, page_cleaner_t: Remove many redundant members.
pc_request_flush_slot(): Replaces pc_request() and pc_flush_slot().
recv_writer_thread: Remove. Recovery works just fine without it, if we
simply invoke buf_flush_sync() at the end of each batch in
recv_sys_t::apply().
recv_recovery_from_checkpoint_finish(): Remove. We can simply call
recv_sys.debug_free() directly.
srv_started_redo: Replaces srv_start_state.
SRV_SHUTDOWN_FLUSH_PHASE: Remove. logs_empty_and_mark_files_at_shutdown()
can communicate with the normal page cleaner loop via the new function
flush_buffer_pool().
buf_flush_remove(): Assert that the calling thread is holding
buf_pool.flush_list_mutex. This removes unnecessary mutex operations
from buf_flush_remove_pages() and buf_flush_dirty_pages(),
which replace buf_LRU_flush_or_remove_pages().
buf_flush_lists(): Renamed from buf_flush_batch(), with simplified
interface. Return the number of flushed pages. Clarified comments and
renamed min_n to max_n. Identify LRU batch by lsn=0. Merge all the functions
buf_flush_start(), buf_flush_batch(), buf_flush_end() directly to this
function, which was their only caller, and remove 2 unnecessary
buf_pool.mutex release/re-acquisition that we used to perform around
the buf_flush_batch() call. At the start, if not all log has been
durably written, wait for a background task to do it, or start a new
task to do it. This allows the log write to run concurrently with our
page flushing batch. Any pages that were skipped due to too recent
FIL_PAGE_LSN or due to them being latched by a writer should be flushed
during the next batch, unless there are further modifications to those
pages. It is possible that a page that we must flush due to small
oldest_modification also carries a recent FIL_PAGE_LSN or is being
constantly modified. In the worst case, all writers would then end up
waiting in log_free_check() to allow the flushing and the checkpoint
to complete.
buf_do_flush_list_batch(): Clarify comments, and rename min_n to max_n.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_flush_space(): Auxiliary function to look up a tablespace for
page flushing.
buf_flush_page(): Defer the computation of space->full_crc32(). Never
call log_write_up_to(), but instead skip persistent pages whose latest
modification (FIL_PAGE_LSN) is newer than the redo log. Also skip
pages on which we cannot acquire a shared latch without waiting.
buf_flush_try_neighbors(): Do not bother checking buf_fix_count
because buf_flush_page() will no longer wait for the page latch.
Take the tablespace as a parameter, and only execute this function
when innodb_flush_neighbors>0. Avoid repeated calls of page_id_t::fold().
buf_flush_relocate_on_flush_list(): Declare as cold, and push down
a condition from the callers.
buf_flush_check_neighbor(): Take id.fold() as a parameter.
buf_flush_sync(): Ensure that the buf_pool.flush_list is empty,
because the flushing batch will skip pages whose modifications have
not yet been written to the log or were latched for modification.
buf_free_from_unzip_LRU_list_batch(): Remove redundant local variables.
buf_flush_LRU_list_batch(): Let the caller buf_do_LRU_batch() initialize
the counters, and report n->evicted.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_do_LRU_batch(): Return the number of pages flushed.
buf_LRU_free_page(): Only release and re-acquire buf_pool.mutex if
adaptive hash index entries are pointing to the block.
buf_LRU_get_free_block(): Do not wake up the page cleaner, because it
will no longer perform any useful work for us, and we do not want it
to compete for I/O while buf_flush_lists(innodb_lru_flush_size, 0)
writes out and evicts at most innodb_lru_flush_size pages. (The
function buf_do_LRU_batch() may complete after writing fewer pages if
more than innodb_lru_scan_depth pages end up in buf_pool.free list.)
Eliminate some mutex release-acquire cycles, and wait for the LRU
flush batch to complete before rescanning.
buf_LRU_check_size_of_non_data_objects(): Simplify the code.
buf_page_write_complete(): Remove the parameter evict, and always
evict pages that were part of an LRU flush.
buf_page_create(): Take a pre-allocated page as a parameter.
buf_pool_t::free_block(): Free a pre-allocated block.
recv_sys_t::recover_low(), recv_sys_t::apply(): Preallocate the block
while not holding recv_sys.mutex. During page allocation, we may
initiate a page flush, which in turn may initiate a log flush, which
would require acquiring log_sys.mutex, which should always be acquired
before recv_sys.mutex in order to avoid deadlocks. Therefore, we must
not be holding recv_sys.mutex while allocating a buffer pool block.
BtrBulk::logFreeCheck(): Skip a redundant condition.
row_undo_step(): Do not invoke srv_inc_activity_count() for every row
that is being rolled back. It should suffice to invoke the function in
trx_flush_log_if_needed() during trx_t::commit_in_memory() when the
rollback completes.
sync_check_enable(): Remove. We will enable innodb_sync_debug from the
very beginning.
Reviewed by: Vladislav Vaintroub
The rw_lock_s_lock() calls for the buf_pool.page_hash became a
clear bottleneck after MDEV-15053 reduced the contention on
buf_pool.mutex. We will replace that use of rw_lock_t with a
special implementation that is optimized for memory bus traffic.
The hash_table_locks instrumentation will be removed.
buf_pool_t::page_hash: Use a special implementation whose API is
compatible with hash_table_t, and store the custom rw-locks
directly in buf_pool.page_hash.array, intentionally sharing
cache lines with the hash table pointers.
rw_lock: A low-level rw-lock implementation based on std::atomic<uint32_t>
where read_trylock() becomes a simple fetch_add(1).
buf_pool_t::page_hash_latch: The special of rw_lock for the page_hash.
buf_pool_t::page_hash_latch::read_lock(): Assert that buf_pool.mutex
is not being held by the caller.
buf_pool_t::page_hash_latch::write_lock() may be called while not holding
buf_pool.mutex. buf_pool_t::watch_set() is such a caller.
buf_pool_t::page_hash_latch::read_lock_wait(),
page_hash_latch::write_lock_wait(): The spin loops.
These will obey the global parameters innodb_sync_spin_loops and
innodb_sync_spin_wait_delay.
buf_pool_t::freed_page_hash: A singly linked list of copies of
buf_pool.page_hash that ever existed. The fact that we never
free any buf_pool.page_hash.array guarantees that all
page_hash_latch that ever existed will remain valid until shutdown.
buf_pool_t::resize_hash(): Replaces buf_pool_resize_hash().
Prepend a shallow copy of the old page_hash to freed_page_hash.
buf_pool_t::page_hash_table::n_cells: Declare as Atomic_relaxed.
buf_pool_t::page_hash_table::lock(): Explain what prevents a
race condition with buf_pool_t::resize_hash().
MDEV-22531 Remove maria::implicit_commit()
MDEV-22607 Assertion `ha_info->ht() != binlog_hton' failed in
MYSQL_BIN_LOG::unlog_xa_prepare
From the handler point of view, Aria now looks like a transactional
engine. One effect of this is that we don't need to call
maria::implicit_commit() anymore.
This change also forces the server to call trans_commit_stmt() after doing
any read or writes to system tables. This work will also make it easier
to later allow users to have system tables in other engines than Aria.
To handle the case that Aria doesn't support rollback, a new
handlerton flag, HTON_NO_ROLLBACK, was added to engines that has
transactions without rollback (for the moment only binlog and Aria).
Other things
- Moved freeing of MARIA_SHARE to a separate function as the MARIA_SHARE
can be still part of a transaction even if the table has closed.
- Changed Aria checkpoint to use the new MARIA_SHARE free function. This
fixes a possible memory leak when using S3 tables
- Changed testing of binlog_hton to instead test for HTON_NO_ROLLBACK
- Removed checking of has_transaction_manager() in handler.cc as we can
assume that as the transaction was started by the engine, it does
support transactions.
- Added new class 'start_new_trans' that can be used to start indepdendent
sub transactions, for example while reading mysql.proc, using help or
status tables etc.
- open_system_tables...() and open_proc_table_for_Read() doesn't anymore
take a Open_tables_backup list. This is now handled by 'start_new_trans'.
- Split thd::has_transactions() to thd::has_transactions() and
thd::has_transactions_and_rollback()
- Added handlerton code to free cached transactions objects.
Needed by InnoDB.
squash! 2ed35999f2a2d84f1c786a21ade5db716b6f1bbc
when selecting from perfschema, filter out statements
used by the test istself in wait_condition.inc, because they,
by design, can be repeated unpredictable number of times.
when selecting from perfschema, filter out statements
used by the test istself in wait_condition.inc, because they,
by design, can be repeated unpredictable number of times.
