When slave executes a transaction bigger than slave's max_binlog_cache_size,
slave will crash. It is caused by the assert that server should only roll back
the statement but not the whole transaction if the error ER_TRANS_CACHE_FULL
happens. But slave sql thread always rollbacks the whole transaction when
an error happens.
Ather this patch, we always clear any error set in sql thread(it is different
from the error in 'SHOW SLAVE STATUS') and it is cleared before rolling back
the transaction.
The procedure for setting up a fake binary log, by changing the
relay log files manually, is run twice when we issue mtr with
--repeat=2. However, when setting it up for the second time,
neither the sql thread is reset nor the server is restarted. This
means that previous stale relay log IO_CACHE metadata - from
first run - is left around. As a consequence, when the test is
run for the second time, the IO_CACHE for the relay log has
position in file different than zero, triggering the assertion.
We fix this by deploying a call to my_b_seek before calling
check_binlog_magic in next_event. This prevents the server
from asserting, in the cases that the SQL thread was reads
from a hot log (relay.NNNNN), then is stopped, then is restarted
from a previous cold log (relay.MMMMM), and then it reaches
the hot log relay.NNNNN again, in which case, the read
coordinates are not set to zero, but to the old values.
Additionally, some comments to the source code were added.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
at mf_iocache.c, line 1722
The slave crashed while two threads: IO thread and user thread
raced for the same mutex (the append_buffer_lock protecting the
relay log's IO_CACHE). The IO thread was trying to flush the
cache, and for that was grabbing the append_buffer_lock.
However, the other thread was closing and reopening the relay log
when the IO thread tried to lock. Closing and reopening the log
includes destroying and reinitialising the IO_CACHE
mutex. Therefore, the IO thread tried to lock a destroyed mutex.
We fix this by backporting patch for BUG#50364 which fixed this
bug in mysql server 5.5+. The patch deploys missing
synchronization when flush_master_info is called and the relay
log is flushed by the IO thread. In detail the patch backports
revision (from mysql-trunk):
- luis.soares@sun.com-20100203165617-b1yydr0ee24ycpjm
This patch already includes the post-push fix also in BUG#50364:
- luis.soares@sun.com-20100222002629-0cijwqk6baxhj7gr
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
When issuing a 'SET GLOBAL SQL_SLAVE_SKIP_COUNTER' statement, the previous
position along with the new position is dumped into the error log. Namely,
the following information is printed out: skip_counter, group_relay_log_name
and group_relay_log_pos.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/having.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in storage/federated/ha_federated.cc
This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
There was an erroneous parameter when calling flush_master_info
from write_ignored_events_info_to_relay_log which could lead to a
server crash. This happens because the I/O thread releases the
log_lock before calling the flush_master_info.
Set the function to call flush_master_info with third parameter
to true, so that the mutex is properly taken.
fails in PB sporadically)
The IO thread can concurrently access the relay log IO_CACHE
while another thread is performing an FLUSH LOGS procedure.
FLUSH LOGS closes and reopens the relay log and while doing so it
(re)initializes its IO_CACHE. During this procedure the IO_CACHE
mutex is also reinitialized, which can cause problems if some
other thread (namely the IO THREAD) is concurrently accessing it
at the time .
This patch fixes the problem by extending the interface of the
flush_master_info function to also include a second paramater,
"need_relay_log_lock", stating whether the thread should grab the
relay log lock or not before actually flushing the relay log.
Also, IO thread now calls flush_master_info with this flag set
when it flushes master info with in the event read_event loop.
Finally, we also increase loop time in rpl_heartbeat_basic test
case, so that the number of calls to flush logs doubles, stressing
this part of the code a little more.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
"HANDLER statements within a transaction might lead to deadlocks".
Introduce a notion of a sentinel to MDL_context. A sentinel
is a ticket that separates all tickets in the context into two
groups: before and after it. Currently we can have (and need) only
one designated sentinel -- it separates all locks taken by LOCK
TABLE or HANDLER statement, which must survive COMMIT and ROLLBACK
and all other locks, which must be released at COMMIT or ROLLBACK.
The tricky part is maintaining the sentinel up to date when
someone release its corresponding ticket. This can happen, e.g.
if someone issues DROP TABLE under LOCK TABLES (generally,
see all calls to release_all_locks_for_name()).
MDL_context::release_ticket() is modified to take care of it.
******
A fix and a test case for Bug#46224 "HANDLER statements within a
transaction might lead to deadlocks".
An attempt to mix HANDLER SQL statements, which are transaction-
agnostic, an open multi-statement transaction,
and DDL against the involved tables (in a concurrent connection)
could lead to a deadlock. The deadlock would occur when
HANDLER OPEN or HANDLER READ would have to wait on a conflicting
metadata lock. If the connection that issued HANDLER statement
also had other metadata locks (say, acquired in scope of a
transaction), a classical deadlock situation of mutual wait
could occur.
Incompatible change: entering LOCK TABLES mode automatically
closes all open HANDLERs in the current connection.
Incompatible change: previously an attempt to wait on a lock
in a connection that has an open HANDLER statement could wait
indefinitely/deadlock. After this patch, an error ER_LOCK_DEADLOCK
is produced.
The idea of the fix is to merge thd->handler_mdl_context
with the main mdl_context of the connection, used for transactional
locks. This makes deadlock detection possible, since all waits
with locks are "visible" and available to analysis in a single
MDL context of the connection.
Since HANDLER locks and transactional locks have a different life
cycle -- HANDLERs are explicitly open and closed, and so
are HANDLER locks, explicitly acquired and released, whereas
transactional locks "accumulate" till the end of a transaction
and are released only with COMMIT, ROLLBACK and ROLLBACK TO SAVEPOINT,
a concept of "sentinel" was introduced to MDL_context.
All locks, HANDLER and others, reside in the same linked list.
However, a selected element of the list separates locks with
different life cycle. HANDLER locks always reside at the
end of the list, after the sentinel. Transactional locks are
prepended to the beginning of the list, before the sentinel.
Thus, ROLLBACK, COMMIT or ROLLBACK TO SAVEPOINT, only
release those locks that reside before the sentinel. HANDLER locks
must be released explicitly as part of HANDLER CLOSE statement,
or an implicit close.
The same approach with sentinel
is also employed for LOCK TABLES locks. Since HANDLER and LOCK TABLES
statement has never worked together, the implementation is
made simple and only maintains one sentinel, which is used either
for HANDLER locks, or for LOCK TABLES locks.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
The slave thread changed the format of the information it used to
connect to the master after patch for BUG 13963. This resulted
in old master getting confused, thence rejecting the slave
connection attempt.
In particular, patch for BUG 13963 removed the rpl_recovery_rank
variable which was, at that time, packed together with the rest
of the information which the slave would use to register itself
on the master. Based on this data, the master would then assert
that the number of bytes received in the connection command was
consistent to what it was expecting.
Therefore, given that a slave, patched with the aforementioned
patch, would not pack the four bytes related to the
rpl_recovery_rank variable, the old master would reject the
connection attempt. It would assume that the data was
inconsistent (fewer bytes than it was expecting) and return
an error.
We fix this by faking an rpl_recovery_rank variable when
registering the slave on the master. In practice this reverts a
small part of patch for BUG 13963, the one related to the slave
connecting to the master.
