to wrong results
3 problems found with DES_ENCRYPT/DES_DECRYPT :
1. The max length was not calculated properly. Fixed in fix_length_and_dec()
2. DES_ENCRYPT had a side effect of sometimes reallocating and changing
the value of its argument. Fixed by explicitly pre-allocating the necessary
space to pad the argument with trailing '*' (stars) when calculating the
DES digest.
3. in DES_ENCRYPT the string buffer for the result value was not
reallocated to the correct size and only string length was assigned to it.
Fixed by making sure there's enough space to hold the result.
information schema tables are based on internal tmp tables which are removed
after each statement execution. So HANDLER comands can not be used with
information schema.
using it.
The crash was due to a null pointer present for select_lex while
processing the view.
Adding a check while opening the view to see if its a child of a
merge table fixed this problem.
The problem was that new lock types were being added without a
corresponding description. Since the lock types (enum values)
are used as indices to the description array, the descriptions
could be shifted depending on the lock type. The solution is to
ensure that every lock type has a correspondent description.
Engine doesn't allow me to.
In case of incompatible changes between old and new table
versions, the mysqlcheck program prints error messages like
this:
error: Table upgrade required. Please do
"REPAIR TABLE `table_name`" to fix it!
However, InnoDB doesn't support REPAIR TABLE query, so the
message is confusing.
Error message text has been changed to:
Table upgrade required. Please do "REPAIR TABLE `table_name`"
or dump/reload to fix it!"
mysql_rename_view can not rename view if database is not the same.
The fix is to add new argument 'new_db' to mysql_rename_view() and
allow rename with different databases
(only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).
comment can't be read back
A change to the lexer in 5.1 caused slash-asterisk-bang-version
sections to be terminated early if there exists a slash-asterisk-
style comment inside it. Nesting comments is usually illegal,
but we rely on versioned comment blocks in mysqldump, and the
contents of those sections must be allowed to have comments.
The problem was that when encountering open-comment tokens and
consuming -or- passing through the contents, the "in_comment"
state at the end was clobbered with the not-in-a-comment value,
regardless of whether we were in a comment before this or not.
So, """/*!VER one /* two */ three */""" would lose its in-comment
state between "two" and "three". Save the echo and in-comment
state, and restore it at the end of the comment if we consume a
comment.
Bug#44091: libmysqld gets stuck waiting on mutex on initialization
The problem was that libmysqld wasn't enforcing a certain
initialization and deinitialization order for the mysys
library. Another problem was that the global object used
for management of log event handlers (aka LOGGER) wasn't
being prepared for a possible reutilization.
What leads to the hang/crash reported is that a failure
to load the language file triggers a double call of the
cleanup functions, causing an already destroyed mutex to
be used.
The solution is enforce a order on the initialization and
deinitialization of the mysys library within the libmysqld
library and to ensure that the global LOGGER object reset
it's internal state during cleanup.
routine does not exist
There is an inconsistency with DROP DATABASE IF EXISTS, DROP TABLE IF
EXISTS and DROP VIEW IF EXISTS: those are binlogged even if the DB or
TABLE does not exist, whereas DROP PROCEDURE IF EXISTS does not. It
would be nice or at least consistent if DROP PROCEDURE/STATEMENT
worked the same too.
Fixed DROP PROCEDURE|FUNCTION IF EXISTS by adding a call to
mysql_bin_log.write in mysql_execute_command. Checked also if all
documented "DROP (...) IF EXISTS" get binlogged.
NOTE: This is a 5.0 backport patch as requested by support.
Binlog the CREATE EVENT unless the created event been successfully dropped
Modified Query_log_event constructor to make sure that error_code
is not set to ER_SERVER_SHUTDOWN or ER_QUERY_INTERRUPTED errors
when NOT_KILLED
We didn't expect "error: no error", although this is
in fact a legitimate state (if something is erroneous
on the master, but not on the slave, e.g. INSERT fails
on master due to UNIQUE constraint which does not exist
on slave).
We now list the ignore for "0: no error" the same way
as any other ignore; moreover, if no or an empty
--slave-skip-errors is passed at start-up, we show
"OFF" instead of empty list, as intended. (The code
for that was there, but was only run for the empty-
argument case, even if it subsequently tested for
both conditions.)
RBR was not considering the option --slave-skip-errors.
To fix the problem, we are reporting the ignored ERROR(s) as warnings thus avoiding
stopping the SQL Thread. Besides, it fixes the output of "SHOW VARIABLES LIKE
'slave_skip_errors'" which was showing nothing when the value "all" was assigned
to --slave-skip-errors.
@sql/log_event.cc
skipped rbr errors when the option skip-slave-errors is set.
@sql/slave.cc
fixed the output of for SHOW VARIABLES LIKE 'slave_skip_errors'"
@test-cases
fixed the output of rpl.rpl_idempotency
updated the test case rpl_skip_error
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
Mysql server crashes because unsafe statements warning is wrongly elevated to error,
which is set the error status of Diagnostics_area of the thread in THD::binlog_query().
Yet the caller believes that binary logging shouldn't touch the status, so it will
set the status also later by my_ok(), my_error() or my_message() seperately
according to the execution result of the statement or transaction.
But the status of Diagnostics_area of the thread is allowed to set only once.
Fixed to clear the error wrongly set by binary logging, but keep the warning message.
Original commentary:
Bug #37348: Crash in or immediately after JOIN::make_sum_func_list
The optimizer pulls up aggregate functions which should be aggregated in
an outer select. At some point it may substitute such a function for a field
in the temporary table. The setup_copy_fields function doesn't take this
into account and may overrun the copy_field buffer.
Fixed by filtering out the fields referenced through the specialized
reference for aggregates (Item_aggregate_ref).
Added an assertion to make sure bugs that cause similar discrepancy
don't go undetected.
The problem is that XML functions(items) do not reset null_value
before their execution and further item excution may use
null_value value of the previous result.
The fix is to reset null_value.
on 5.0
The server crashes on an assert in net_end_statement indicating that the
Diagnostics area wasn't set properly during execution.
This happened on a multi table DELETE operation using the IGNORE keyword.
The keyword is suppose to allow for execution to continue on a best effort
despite some non-fatal errors. Instead execution stopped and no client
response was sent which would have led to a protocol error if it hadn't been
for the assert.
This patch corrects this issue by checking for the existence of an IGNORE
option before setting an error state during row-by-row delete iteration.
updates
Attempt to execute trigger or stored function with multi-UPDATE
which used - but didn't update - a table that was also used by
the calling statement led to an error. Read-only reference to
tables used in the calling statement should be allowed.
This problem was caused by the fact that check for conflicting
use of tables in SP/triggers was performed in open_tables(),
and in case of multi-UPDATE we didn't know exact lock type at
this stage.
We solve the problem by moving this check to lock_tables(), so
it can be performed after exact lock types for tables used by
multi-UPDATE are determined.
UNION could convert fixed-point FLOAT(M,D)/DOUBLE(M,D) columns
to FLOAT/DOUBLE when aggregating data types from the SELECT
substatements. While there is nothing particularly wrong with
this behavior, especially when M is greater than the hardware
precision limits, it could be confusing in cases when all
SELECT statements in a union have the same
FLOAT(M,D)/DOUBLE(M,D) columns with equal precision
specifications listed in the same position.
Since the manual is quite vague on what data type should be
returned in such cases, the bug was fixed by implementing the
most 'expected' behavior: do not convert FLOAT(M,D)/DOUBLE(M,D)
to anything else if all SELECT statements in a UNION have the
same precision for that column.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
