DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
This is a backport of the fix for:
Bug#13633549 HANDLE_FATAL_SIGNAL IN TEST_IF_SKIP_SORT_ORDER/CREATE_SORT_INDEX
Don't invoke the range optimizer for a NULL select.
PROBLEM:
When large number of connections are continuously made
with wait_timeout of 600 seconds for some hours, some
connections remain after wait_timeout expired and also
new connections get struck under the configuration and
the scenario reported in bug#16196591.
FIX:
The cause of this bug is the issue identified and fixed in
the BUG#16088658 in 5.6.Also LOCK_thread_count contention
issue fixed in BUG#15921866 in 5.6 need to be in 5.5 as
well. Since the issue is not reproducible, it has been
verified at customer configuration the issue could not
be reproduced after a 48-hour test with a non-debug build
which includes the above two fixes backported.
Analysis:
--------
As part of the fix for Bug#11757464, the 'out of memory' error
condition was not pushed to the diagnostic area as it requires
memory allocation. However in cases of SIGNAL/RESIGNAL 'out of
memory' error, the server may not be out of memory. Hence it
would be good to report the error in such cases.
Fix:
---
Push only non fatal 'out of memory' errors to the diagnostic area.
Since SIGNAL/RESIGNAL of 'out of memory' error may not be fatal,
the error is reported.
Some queries with the "SELECT ... FROM DUAL" nested subqueries
failed with an assertion on debug builds.
Non-debug builds were not affected.
There were a few different issues with similar assertion
failures on different queries:
1. The first problem was related to the incomplete propagation
of the "non-constant" item status from underlying subquery
items to the outer item tree: in some cases non-constants were
interpreted as constants and evaluated at the preparation stage
(val_int() calls withing fix_fields() etc).
Thus, the default implementation of Item_ref::const_item() from
the Item parent class didn't take into account the "const_item"
status of the referenced item tree -- it used the insufficient
"used_tables() == 0" check instead. This worked in most cases
since our "non-constant" functions like RAND() and SLEEP() set
the RAND_TABLE_BIT in the used table map, so they aren't
non-constant from Item_ref's "point of view". However, the
"SELECT ... FROM DUAL" subquery may have an empty map of used
tables, but at the same time subqueries are never "constant" at
the context analysis stage (preparation, view creation etc).
So, the non-contantness of such subqueries was missed.
Fix: the Item_ref::const_item() function has been overloaded to
take into account both (*ref)->const_item() status and tricky
Item_ref::used_tables() return values, since the only
(*ref)->const_item() call is not enough there.
2. In some cases instead of the const_item() call we check a
value of the Item::with_subselect field to recognize items
with nested subqueries. However, the Item_ref class didn't
propagate this value from the referenced item tree.
Fix: Item::has_subquery() and Item_ref::has_subquery()
functions have been backported from 5.6. All direct
references to the with_subselect fields of nested items have
been replaced with the has_subquery() function call.
3. The Item_func_regex class didn't propagate with_subselect
as well, since it overloads the Item_func::fix_fields()
function with insufficient fix_fields() implementation.
Fix: the Item_func_regex::fix_fields() function has been
modified to gather "constant" statuses from inner items.
4. The Item_func_isnull::update_used_tables() function has
a special branch for the underlying item where the maybe_null
value is false: in this case it marks the Item_func_isnull
as a "const_item" and sets the cached_value to false.
However, the Item_func_isnull::val_int() was not in sync with
update_used_tables(): it didn't take into account neither
const_item_cache nor cached_value for the case of
"args[0]->maybe_null == false optimization".
As far as such an Item_func_isnull has "const_item() == true",
it's ok to call Item_func_isnull::val_int() etc from outer
items on preparation stage. In this case the server tried to
call Item_func_isnull::args[0]->isnull(), and if the args[0]
item contained a nested not-nullable subquery, it failed
with an assertion.
Fix: take the value of Item_func_isnull::const_item_cache into
account in the val_int() function.
5. The auxiliary Item_is_not_null_test class has a similar
optimization in the update_used_tables() function as the
Item_func_isnull class has, and the same issue in the val_int()
function.
In addition to that the Item_is_not_null_test::update_used_tables()
doesn't update the const_item_cache value, so the "maybe_null"
optimization is useless there. Thus, we missed some optimizations
of cases like these (before and after the fix):
< <is_not_null_test>(a),
---
> <cache>(<is_not_null_test>(a)),
or
< having (<is_not_null_test>(a) and <is_not_null_test>(a))
---
> having 1
etc.
Fix: update Item_is_not_null_test::const_item_cache in
update_used_tables() and take in into account in val_int().
Backport of fix for Bug#13581962
mysql-test/r/cast.result:
Added test result for Bug#13581962,Bug#14096619
mysql-test/r/ctype_utf8mb4.result:
Added test result for Bug#13581962,Bug#14096619
mysql-test/t/cast.test:
Added test case for Bug#13581962,Bug#14096619
mysql-test/t/ctype_utf8mb4.test:
Added test case for Bug#13581962,Bug#14096619
sql/item_func.h:
limit max length by MY_INT64_NUM_DECIMAL_DIGITS
Backport of Bug#13581962
mysql-test/r/cast.result:
Added test result for Bug#13581962,Bug#14096619
mysql-test/t/cast.test:
Added test case for Bug#13581962,Bug#14096619
sql/item_func.h:
limit max length by MY_INT64_NUM_DECIMAL_DIGITS
Due to an internal change in the server code in between 5.1 and 5.5
(wl#2649) the hash function used in KEY partitioning changed
for numeric and date/time columns (from binary hash calculation
to character based hash calculation).
Also enum/set changed from latin1 ci based hash calculation to
binary hash between 5.1 and 5.5. (bug#11759782).
These changes makes KEY [sub]partitioned tables on any of
the affected column types incompatible with 5.5 and above,
since the calculation of partition id differs.
Also since InnoDB asserts that a deleted row was previously
read (positioned), the server asserts on delete of a row that
is in the wrong partition.
The solution for this situation is:
1) The partitioning engine will check that delete/update will go to the
partition the row was read from and give an error otherwise, consisting
of the rows partitioning fields. This will avoid asserts in InnoDB and
also alert the user that there is a misplaced row. A detailed error
message will be given, including an entry to the error log consisting
of both table name, partition and row content (PK if exists, otherwise
all partitioning columns).
2) A new optional syntax for KEY () partitioning in 5.5 is allowed:
[SUB]PARTITION BY KEY [ALGORITHM = N] (list_of_cols)
Where N = 1 uses the same hashing as 5.1 (Numeric/date/time fields uses
binary hashing, ENUM/SET uses charset hashing) N = 2 uses the same
hashing as 5.5 (Numeric/date/time fields uses charset hashing,
ENUM/SET uses binary hashing). If not set on CREATE/ALTER it will
default to 2.
This new syntax should probably be ignored by NDB.
3) Since there is a demand for avoiding scanning through the full
table, during upgrade the ALTER TABLE t PARTITION BY ... command is
considered a no-op (only .frm change) if everything except ALGORITHM
is the same and ALGORITHM was not set before, which allows manually
upgrading such table by something like:
ALTER TABLE t PARTITION BY KEY ALGORITHM = 1 () or
ALTER TABLE t PARTITION BY KEY ALGORITHM = 2 ()
4) Enhanced partitioning with CHECK/REPAIR to also check for/repair
misplaced rows. (Also works for ALTER TABLE t CHECK/REPAIR PARTITION)
CHECK FOR UPGRADE:
If the .frm version is < 5.5.3
and uses KEY [sub]partitioning
and an affected column type
then it will fail with an message:
KEY () partitioning changed, please run:
ALTER TABLE `test`.`t1` PARTITION BY KEY ALGORITHM = 1 (a)
PARTITIONS 12
(i.e. current partitioning clause, with the addition of
ALGORITHM = 1)
CHECK without FOR UPGRADE:
if MEDIUM (default) or EXTENDED options are given:
Scan all rows and verify that it is in the correct partition.
Fail for the first misplaced row.
REPAIR:
if default or EXTENDED (i.e. not QUICK/USE_FRM):
Scan all rows and every misplaced row is moved into its correct
partitions.
5) Updated mysqlcheck (called by mysql_upgrade) to handle the
new output from CHECK FOR UPGRADE, to run the ALTER statement
instead of running REPAIR.
This will allow mysql_upgrade (or CHECK TABLE t FOR UPGRADE) to upgrade
a KEY [sub]partitioned table that has any affected field type
and a .frm version < 5.5.3 to ALGORITHM = 1 without rebuild.
Also notice that if the .frm has a version of >= 5.5.3 and ALGORITHM
is not set, it is not possible to know if it consists of rows from
5.1 or 5.5! In these cases I suggest that the user does:
(optional)
LOCK TABLE t WRITE;
SHOW CREATE TABLE t;
(verify that it has no ALGORITHM = N, and to be safe, I would suggest
backing up the .frm file, to be used if one need to change to another
ALGORITHM = N, without needing to rebuild/repair)
ALTER TABLE t <old partitioning clause, but with ALGORITHM = N>;
which should set the ALGORITHM to N (if the table has rows from
5.1 I would suggest N = 1, otherwise N = 2)
CHECK TABLE t;
(here one could use the backed up .frm instead and change to a new N
and run CHECK again and see if it passes)
and if there are misplaced rows:
REPAIR TABLE t;
(optional)
UNLOCK TABLES;
ON COL WITH COMPOSITE INDEX
This problem is caused by the patch for the bug#11751794.
While checking for the keypart covering non grouping attribute. we are not
checking whether the root node of the SEL_ARG* tree for the index have any
cvalue or not.
sql/opt_range.cc:
check whether the keeypart_tree has any range tree.
ON COL WITH COMPOSITE INDEX
This problem is caused by the patch for the bug#11751794.
While checking for the keypart covering non grouping attribute. we are not
checking whether the root node of the SEL_ARG* tree for the index have any
cvalue or not.
On a previous fix, user variables with zero length name were incorrectly
considered as event corruption, despite that them are allowed by server.
Fix this wrong assumption by allowing again user variables with zero
length on binary log.
PROPERLY QUOTED IN BINLOG FILE
Problem: In load data file query, User variables are allowed
inside "Into_list" and "Set_list". These user variables used
inside these two lists are not properly guarded with backticks
while server is writting into binlog. Hence user variable names
like a` cannot be used in this context.
Fix: Properly quote these variables while
writting into binlog
mysql-test/r/func_compress.result:
changing result file
mysql-test/r/variables.result:
changing result file
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
changing result file
sql/item_func.cc:
Quote the user variable items
Due to not resetting a member (last_added) of
Deferred events class inside a clean up function
(Deferred_log_events::rewind), there is a memory
leak on filtered slaves.
Fix:
Resetting last_added to NULL in rewind() function.
sql/rpl_utility.cc:
Resetting last_added to NULL to avoid memory leak
FROM MYSQL_BINLOG_SEND
As part Bug #11747416 A DISK FULL MAKES BINARY LOG CORRUPT,
reading the variable "binlog_can_be_corrupted" was removed
In the existing code the value of this variable is only set,
never read. And also this issue causing compiler warnings.
So the variable is completely redundant and should be removed.
sql/sql_repl.cc:
Removing dead code
Some queries with the "SELECT ... FROM DUAL" nested subqueries
failed with an assertion on debug builds.
Non-debug builds were not affected.
There were a few different issues with similar assertion
failures on different queries:
1. The first problem was related to the incomplete propagation
of the "non-constant" item status from underlying subquery
items to the outer item tree: in some cases non-constants were
interpreted as constants and evaluated at the preparation stage
(val_int() calls withing fix_fields() etc).
Thus, the default implementation of Item_ref::const_item() from
the Item parent class didn't take into account the "const_item"
status of the referenced item tree -- it used the insufficient
"used_tables() == 0" check instead. This worked in most cases
since our "non-constant" functions like RAND() and SLEEP() set
the RAND_TABLE_BIT in the used table map, so they aren't
non-constant from Item_ref's "point of view". However, the
"SELECT ... FROM DUAL" subquery may have an empty map of used
tables, but at the same time subqueries are never "constant" at
the context analysis stage (preparation, view creation etc).
So, the non-contantness of such subqueries was missed.
Fix: the Item_ref::const_item() function has been overloaded to
take into account both (*ref)->const_item() status and tricky
Item_ref::used_tables() return values, since the only
(*ref)->const_item() call is not enough there.
2. In some cases instead of the const_item() call we check a
value of the Item::with_subselect field to recognize items
with nested subqueries. However, the Item_ref class didn't
propagate this value from the referenced item tree.
Fix: Item::has_subquery() and Item_ref::has_subquery()
functions have been backported from 5.6. All direct
references to the with_subselect fields of nested items have
been with the has_subquery() function call.
3. The Item_func_regex class didn't propagate with_subselect
as well, since it overloads the Item_func::fix_fields()
function with insufficient fix_fields() implementation.
Fix: the Item_func_regex::fix_fields() function has been
modified to gather "constant" statuses from inner items.
4. The Item_func_isnull::update_used_tables() function has
a special branch for the underlying item where the maybe_null
value is false: in this case it marks the Item_func_isnull
as a "const_item" and sets the cached_value to false.
However, the Item_func_isnull::val_int() was not in sync with
update_used_tables(): it didn't take into account neither
const_item_cache nor cached_value for the case of
"args[0]->maybe_null == false optimization".
As far as such an Item_func_isnull has "const_item() == true",
it's ok to call Item_func_isnull::val_int() etc from outer
items on preparation stage. In this case the server tried to
call Item_func_isnull::args[0]->isnull(), and if the args[0]
item contained a nested not-nullable subquery, it failed
with an assertion.
Fix: take the value of Item_func_isnull::const_item_cache into
account in the val_int() function.
5. The auxiliary Item_is_not_null_test class has a similar
optimization in the update_used_tables() function as the
Item_func_isnull class has, and the same issue in the val_int()
function.
In addition to that the Item_is_not_null_test::update_used_tables()
doesn't update the const_item_cache value, so the "maybe_null"
optimization is useless there. Thus, we missed some optimizations
of cases like these (before and after the fix):
< <is_not_null_test>(a),
---
> <cache>(<is_not_null_test>(a)),
or
< having (<is_not_null_test>(a) and <is_not_null_test>(a))
---
> having 1
etc.
Fix: update Item_is_not_null_test::const_item_cache in
update_used_tables() and take in into account in val_int().
RATHER THAN A TABLE
Problem: In RBR, If a table is converted into a view at slave,
(i.e., "drop table 'object1'" & "create view 'object1'"), then any
DML operations on the table at master are causing crash at slave.
Analysis: Slave prepares tables to be opened for DML list when it
receives Table_map_log_event(s). And the same list will be sent to
open_table function. Open_table logic assumes that if the list
contains a view object, it also contains "select_lex" object of
that view. In the above special case, the table object does not
contain 'select_lex' as it is base table at master. Since it
is a view at slave, open_table logic goes to 'mysql_make_view()'
function which assumes that 'select_lex' exists for the object.
Fix: While preparing 'tables to be opened' list, we should make
sure that table required type is 'base table'. If it is not
base table while opening the object, mysql_make_view will throw an
error similar to 'object is not a base table'
sql/log_event.cc:
Restrict that all table_map_log_event's objects should be
base tables @ slave also.
Consider the following query:
SELECT f_1,..,f_m, AGGREGATE_FN(C)
FROM t1
WHERE ...
GROUP BY ...
Loose index scan ("Using index for group-by") can be used for
this query if there is an index 'i' covering all fields in the
select list, and the GROUP BY clause makes up a prefix f1,...,fn
of 'i'. Furthermore, according to rule NGA2 of
get_best_group_min_max(), the WHERE clause must contain a
conjunction of equality predicates for all fields fn+1,...,fm.
The problem in this bug was that a query with WHERE clause that
broke NGA2(NGA: Non Group Attribuite) was not detected and therefore
used loose index scan.
This lead to wrong result. The query had an index
covering (c1,c2) and had:
"WHERE (c1 = 1 AND c2 = 'a') OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
or
"WHERE (c1 = 1 ) OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
This WHERE clause cannot be transformed to a conjunction of
equality predicates.
The solution is to introduce another rule, NGA3, that complements
NGA2. NGA3 says that if a gap field (field between those
listed in GROUP BY and C in the index) has a predicate, then
there can only be one range in the query. This requirement is
more strict than it has to be in theory. BUG 15947433 will deal
with that.
sql/opt_range.cc:
check for the repetition of non group field.
Consider the following query:
SELECT f_1,..,f_m, AGGREGATE_FN(C)
FROM t1
WHERE ...
GROUP BY ...
Loose index scan ("Using index for group-by") can be used for
this query if there is an index 'i' covering all fields in the
select list, and the GROUP BY clause makes up a prefix f1,...,fn
of 'i'. Furthermore, according to rule NGA2 of
get_best_group_min_max(), the WHERE clause must contain a
conjunction of equality predicates for all fields fn+1,...,fm.
The problem in this bug was that a query with WHERE clause that
broke NGA2 was not detected and therefore used loose index scan.
This lead to wrong result. The query had an index
covering (c1,c2) and had:
"WHERE (c1 = 1 AND c2 = 'a') OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
or
"WHERE (c1 = 1 ) OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
This WHERE clause cannot be transformed to a conjunction of
equality predicates.
The solution is to introduce another rule, NGA3, that complements
NGA2. NGA3 says that if a gap field (field between those
listed in GROUP BY and C in the index) has a predicate, then
there can only be one range in the query. This requirement is
more strict than it has to be in theory. BUG 15947433 will deal
with that.
sql/opt_range.cc:
check for the repetition of non group field.
Analysis:
---------
When the server is out of memory, an error is raised
to indicate the same. Handling the error requires
more memory to be allocated which fails, hence the
error handling loops in a recursion and causes the
server to crash.
Fix:
---
a) Prevents pushing the 'out of memory' error condition
to the diagnostic area as it requires memory allocation.
GET DIAGNOSTICS, SHOW WARNINGS and SHOW ERRORS statements
will not show information about this error. However the
'out of memory' error is returned to the client.
b) It sets the ME_FATALERROR flag when 'out of memory' errors
are reported (for places where the flag is not already set).
This flag prevents activation of SP error handlers which also
require memory allocation and therefore are likely to fail.
WITH A VARIABLE AND ORDER BY
Bug#16035412 MYSQL SERVER 5.5.29 WRONG SORTING USING COMPLEX INDEX
This is a fix for a regression introduced by Bug#12667154:
Bug#12667154 attempted to fix a performance problem with subqueries
that did filesort. For doing filesort, the optimizer creates a quick
select object to use when building the sort index. This quick select
object was deleted after the first call to create_sort_index(). Thus,
for queries where the subquery was executed multiple times, the quick
object was only used for the first execution. For all later executions
of the subquery, filesort used a complete table scan for building the
sort index. The fix for Bug#12667154 tried to fix this by not deleting
the quick object after the first execution of create_sort_index() so
that it would be re-used for building the sort index by the following
executions of the subquery.
This regression introduced in Bug#12667154 is that due to not deleting
the quick select object after building the sort index, the quick
object could in some cases be used also during the second phase of the
execution of the subquery instead of using the created sort
index. This caused wrong results to be returned.
The fix for this issue is to delete the reference to the select object
after it has been used in create_sort_index(). In this way the select
and quick objects will not be available when doing the second phase
of the execution of the select operation. To ensure that the select
object can be re-used for the following executions of the subquery
we make a copy of the select pointer. This is used for restoring the
select object after the select operation is completed.
mysql-test/suite/innodb/r/innodb_mysql.result:
Changed explain output: The explain now contains "Using where" since we
have restored the select pointer after doing the filesort operation.
sql/sql_select.cc:
Change create_sort_index() so that it always sets the pointer to
the select object to NULL. This is done in order to avoid that the
select->quick object can be used when execution the main part of
the select operation.
sql/sql_select.h:
New member in JOIN_TAB: saved_select. Used by create_sort_index to
make a backup copy of the select pointer.
Analysis:
--------
REPLACE operation provides incorrect output when
user variable is supplied as an argument and there
are multiple rows on which the operation is performed.
Consider the example below:
SET @var='(( 00000000 ++ 00000000 ))';
SELECT REPLACE(@var, '00000000', table_name) AS a FROM
INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA='mysql';
Invalid output:
+---------------------------------------+
| REPLACE(@var, '00000000', TABLE_NAME) |
+---------------------------------------+
| (( columns_priv ++ columns_priv )) |
| (( columns_priv ++ columns_priv )) |
......
......
| (( columns_priv ++ columns_priv )) |
| (( columns_priv ++ columns_priv )) |
| (( columns_priv ++ columns_priv )) |
+---------------------------------------+
The user argument supplied as the string to REPLACE
operation is overwritten after the first iteration
to '(( columns_priv ++ columns_priv ))'.
The overwritten string after the first iteration
is used for the subsequent REPLACE iteration. Since
the pattern string is not found, it returns invalid
output as mentioned above.
Fix:
---
If the Alloced_length is zero, realloc() and create a
copy of the string which is then used for the REPLACE
operation for every iteration.
INCLUDES FIRST PARTITION WHEN PRUNING
PROBLEM
-------
TO_DAYS()/TO_SECONDS() can return NULL for invalid dates which
was stored in the first partition ,therefore the first partition
was always included for the scan when range was specified.
FIX
---
The fix is a small optimization which we have included ,which will
prune the scanning of NULL/first partition if the dates specified
in the range are valid and in the same year and month . TO_SECONDS()
function is not supported in 5.1 so removed it from the fix and test
scripts for mysql-5.1 version.
INCORRECT RESULTS
This is a backport of fix for Bug#13068506.
mysql-test/r/join_outer.result:
Added test result for Bug#13068506
mysql-test/t/join_outer.test:
Added test case for Bug#13068506
sql/item.h:
Implement Item_outer_ref::not_null_tables()
AVAILABLE MEMORY IS TOO LOW
Analysis:
---------
In function "mysql_make_view", "table->view" is initialized
after parsing(using File_parser::parse) the view definition.
If "::parse" function fails then control is moved to label
"err:". Here we have assert (table->view == thd->lex).
This assert fails if "::parse" function fails, as
table->view is not initialized yet.
File_parser::parse fails if data being parsed is incorrect/
corrupted or when memory allocation fails. In this scenario
its failing because of failure in memory allocation.
Fix:
---------
In case of failure in function "File_parser::parse", moving
to label "err:" is incorrect. Modified code to move
to label "end:".
Problem:
During the index intersect access method, the SQL layer will access one row,
that satisfies a set of conditions, using an index i1. And then it will try to
access the same row, with other set of conditions using the next index i2. If
the fetch from i2 fails (we are talking about an error situation here and not
simply an unmatched row situation), then it will unlock the row accessed via
i1. This will work in all situations except deadlock error.
When a deadlock happens, InnoDB will rollback the transaction. InnoDB intimates
the SQL layer about this through the THD::transaction_rollback_request member.
But this is not currently used by the SQL layer.
Solution:
When an error happens, the SQL layer must check the
THD::transaction_rollback_request member, before calling handler::unlock_row().
We have also added a debug assert in ha_innobase::unlock_row() checking that
it must be called only when the transaction is in active state.
rb#1773 approved by Marko and Sunny.
Problem:If Disk becomes full while writing into the binlog,
then the server instance hangs till someone frees the space.
After user frees up the disk space, mysql server crashes
with an assert (m_status != DA_EMPTY)
Analysis: wait_for_free_space is being called in an
infinite loop i.e., server instance will hang until
someone frees up the space. So there is no need to
set status bit in diagnostic area.
Fix: Replace my_error/my_printf_error with
sql_print_warning() which prints the warning in error log.
include/my_sys.h:
Provision to call sql_print_warning from mysys files
mysys/errors.c:
Replace my_error/my_printf_error with
sql_print_warning() which prints the warning in error log.
mysys/my_error.c:
implementation of my_printf_warning
mysys/my_write.c:
Adding logic to break infinite loop in the simulation
sql/mysqld.cc:
Provision to call sql_print_warning from mysys files
Details of BUG#11746142: CALLING MYSQLD WHILE ANOTHER
INSTANCE IS RUNNING, REMOVES PID FILE
Fix: Before removing the pid file, ensure it was created
by the same process, leave it intact otherwise.
sql/mysqld.cc:
delete_pid_file() introduced, which checks that the pid file
belongs to the process before removing it
DOS ATTACKS
Problem:
For detailed description, see Bug#42502. This bug is a duplicate
of Bug#42502. The complete fix for Bug#42502 was not made as
proposed. Hence the bug still persists.
Fix:
Make the changes as proposed originally for the bugfix of 42502.
Which is to remove the allocation of the memory before we actually
check for any errors.
sql/tztime.cc:
Remove the double allocation for tz_info
TO SIGNED
Problem:
When we are joining types (of fields) in case of a union, we usually
upgrade the datatypes to the largest present in the query.
In case of mediumint, it is not happening.
Analysis:
When joined with types LONG and LONGLONG, mediumint should get
upgraded to LONG and LONGLONG respectively.
W.r.t the given query, constant '1' will be created as a LONGLONG
internally and SIGNED flag is enabled. As a result, while combining
types for the field, LONGLONG along with MEDIUMINT gets converted
to LONG first. LONG with MEDIUMINT(of the third select) gets converted
to MEDIUMINT. SIGNED FLAG would be that of the first field's.
As a result, the final result would be SIGNED MEDIUMINT.
Fix:
While joining types, MEDIUMINT with LONGLONG and MEDIUMINT with LONG
is converted to LONGLONG and LONG respectively. Also, made some
changes for FLOAT and DOUBLE.
sql/field.cc:
Changed merge types for MEDIUMINT.
The problem is a shift operation that is not 64-bit safe.
The consequence is that used tables information for a join with 32 tables
or more will be incorrect.
Fixed by adding a type cast in Item_sum::update_used_tables().
Also used the opportunity to fix some other potential bugs by adding an
explicit type-cast to an integer in a left-shift operation.
Some of them were quite harmless, but was fixed in order to get the same
signed-ness as the other operand of the operation it was used in.
sql/item_cmpfunc.cc
Adjusted signed-ness for some integers in left-shift.
sql/item_subselect.cc
Added type-cast to nesting_map (which is a 32/64 bit type, so
potential bug for deeply nested queries).
sql/item_sum.cc
Added type-cast to nesting_map (32/64-bit type) and table_map
(64-bit type).
sql/opt_range.cc
Added type-cast to ulonglong (which is a 64-bit type).
sql/sql_base.cc
Added type-cast to nesting_map (which is a 32/64-bit type).
sql/sql_select.cc
Added type-cast to nesting_map (32/64-bit type) and key_part_map
(64-bit type).
sql/strfunc.cc
Changed type-cast from longlong to ulonglong, to preserve signed-ness.
