Implement @@gtid_binlog_state. This is the internal state of the binlog
(most recent GTID logged for every domain_id and server_id). This allows
to save the state before RESET MASTER and restore it afterwards.
When @@GLOBAL.gtid_strict_mode=1, then certain operations result
in error that would otherwise result in out-of-order binlog files
between servers.
GTID sequence numbers are now allocated independently per domain;
this results in less/no holes in GTID sequences, increasing the
likelyhood that diverging binlogs will be caught by the slave when
GTID strict mode is enabled.
Change of user interface to be more logical and more in line with expectations
to work similar to old-style replication.
User can now explicitly choose in CHANGE MASTER whether binlog position is
taken into account (master_gtid_pos=current_pos) or not (master_gtid_pos=
slave_pos) when slave connects to master.
@@gtid_pos is replaced by three separate variables @@gtid_slave_pos (can
be set by user, replicated GTIDs only), @@gtid_binlog_pos (read only), and
@@gtid_current_pos (a combination of the two, most recent GTID within each
domain). mysql.rpl_slave_state is renamed to mysql.gtid_slave_pos to match.
This fixes MDEV-4474.
Merge of 10.0-mdev26 feature tree into 10.0-base.
Global transaction ID is prepended to each event group in the binlog.
Slave connect can request to start from GTID position instead of specifying
file name/offset of master binlog. This facilitates easy switch to a new
master.
Slave GTID state is stored in a table mysql.rpl_slave_state, which can be
InnoDB to get crash-safe slave state.
GTID includes a replication domain ID, allowing to keep track of distinct
positions for each of multiple masters.
Test crashing the master, check that it recovers the binlog state.
Fix one bug introduced by previous commit (crash-recoved binlog state was
overwritten by loading stale binlog state file).
Fix Windows build error.
Implement test case rpl_gtid_stop_start.test to test normal stop and restart
of master and slave mysqld servers.
Fix a couple bugs found with the test:
- When InnoDB is disabled (no XA), the binlog state was not read when master
mysqld starts.
- Remove old code that puts a bogus D-S-0 into the initial binlog state, it
is not correct in current design.
- Fix memory leak in gtid_find_binlog_file().
During server shutdown, we need to wait for binlog checkpointing to
finish in the binlog background thread before closing the binlog.
This was not done, so we could get assert and failure to finish the
final binlog checkpoint if shutdown happened in the middle.
Fix things so that a master can switch with MASTER_GTID_POS=AUTO to a slave
that was previously running with log_slave_updates=0, by looking into the
slave replication state on the master when the slave requests something not
present in the binlog.
Be a bit more strict about what position the slave can ask for, to avoid some
easy-to-hit misconfiguration errors.
Start over with seq_no counter when RESET MASTER.
When starting slave, check binlog state in addition to mysql.rpl_slave.state.
This allows to switch a previous master to be a slave directly
with MASTER_GTID_POS=AUTO.
Make the commit checkpoint inside InnoDB be asynchroneous.
Implement a background thread in binlog to do the writing and flushing of
binlog checkpoint events to disk.
Root cause was that number of entries in commit checkpoint buffer
was bigger than total available entries in the mmap()'ed score
file. This causes TC_LOG_MMAP to run out of entries before even
the first checkpoint is started, which causes a hang.
Fixed by making sure we have fewer entries within one commit
checkpoint than total available scorefile entries.
Another part of this bug was discovery of severel unrelated bugs
in TC_LOG_MMAP dating back to 5.1. These were fixed in 5.1 and
will be merged up (the problem this patch fixes exists only in
10.0).
Fix some problems in the TC_LOG_MMAP commit processing, which could
lead to assertions in some cases.
Problems are mostly reproducible in MariaDB 10.0 with asynchroneous
commit checkpoints, but most of the problems were present in earlier
versions also.
Changed names of multi-source log files so that original suffixes are kept.
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Updated results
mysql-test/suite/multi_source/info_logs.test:
Changed to test with complex names to be able to verify the filename generator code
mysql-test/suite/multi_source/relaylog_events.result:
Updated results
mysql-test/suite/multi_source/reset_slave.result:
Updated results
mysql-test/suite/multi_source/skip_counter.result:
Updated results
mysql-test/suite/multi_source/skip_counter.test:
Added testing of max_relay_log_size
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
sql/log.cc:
Removed some wrong casts
sql/log.h:
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added that max_relay_log_size copies it's values from max_binlog_size
sql/mysqld.h:
Removed max_relay_log_size
sql/rpl_mi.cc:
Changed names of multi-source log files so that original suffixes are kept.
sql/rpl_mi.h:
Updated prototype
sql/rpl_rli.cc:
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Made max_relay_log_size depending on master connection.
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/sql_class.h:
Made max_relay_log_size depending on master connection.
sql/sql_repl.cc:
Updated calls to create_signed_file_name()
sql/sys_vars.cc:
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
- Added parameter to reset_logs() so that one can specify if new logs should be created.
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/suite/multi_source/info_logs.result:
New test
mysql-test/suite/multi_source/info_logs.test:
New test
mysql-test/suite/multi_source/my.cnf:
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Added cleanup
mysql-test/suite/multi_source/relaylog_events.test:
Added cleanup
mysql-test/suite/multi_source/reset_slave.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.test:
Syncronize positions before show full slave status
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
sql/log.cc:
Added parameter to reset_logs() so that one can specify if new logs should be created.
sql/log.h:
Added parameter to reset_logs()
sql/rpl_mi.cc:
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
sql/rpl_rli.cc:
If we do a full reset, don't create any new relay log files.
sql/share/errmsg-utf8.txt:
Improved error message if connection exists
sql/sql_parse.cc:
Fixed memory leak
sql/sql_repl.cc:
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
Introduce a new storage engine API method commit_checkpoint_request().
This is used to replace the fsync() at the end of every storage engine
commit with a single fsync() when a binlog is rotated.
Binlog rotation is now done during group commit instead of being
delayed until unlog(), removing some server stall and avoiding an
expensive lock/unlock of LOCK_log inside unlog().
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
Keep track of how many pending XIDs (transactions that are prepared in
storage engine and written into binlog, but not yet durably committed
on disk in the engine) there are in each binlog.
When the count of one binlog drops to zero, write a new binlog checkpoint
event, telling which is the oldest binlog with pending XIDs.
When doing XA recovery after a crash, check the last binlog checkpoint
event, and scan all binlog files from that point onwards for XIDs that
must be committed if found in prepared state inside engine.
Remove the code in binlog rotation that waits for all prepared XIDs to
be committed before writing a new binlog file (this is no longer necessary
when recovery can scan multiple binlog files).
the new file is fully synced to disk and binlog index. This fixes a window
where a crash would leave next server restart unable to detect that a crash
occured, causing recovery to fail.
The function mysql_show_binlog_events has a local stack variable
'LOG_INFO linfo;', which is assigned to thd->current_linfo, however
this variable goes out of scope and is destroyed before clean
thd->current_linfo.
The problem is solved by moving 'LOG_INFO linfo;' to function scope.
BIN LOG HAS BEEN MOVED
When moving the binary/relay log files from one location to
another and restarting the server with a different log-bin or
relay-log paths, would cause the startup process to abort. The
root cause was that the server would not be able to find the log
files because it would consider old paths for entries in the
index file instead of the new location. What's even worse, the
relative paths would not be considered relative to the path
provided in log-bin and relay-log, but to mysql_data_dir.
We fix the cases where the server contains relative paths. When
the server is reading from the index file, it checks whether the
entry contains relative paths. If it does, we replace it with the
absolute path set in log-bin/relay-log option. Absolute paths
remain unchanged and the index must be manually edited to
consider the new log-bin and/or relay-log path (this should be
documented). This is a fix for a GA version, that does not break
behavior (that much).
For development versions, we should go with Zhenxing's approach
that removes paths altogether from index files.
mysql-test/include/begin_include_file.inc:
Added parameter to keep the begin_include_file.inc silent. Useful when
including scripts that contain platform dependent parameters, for example:
--let $rpl_server_parameters=--log-bin=$tmpdir/slave-bin --relay-log=$tmpdir/slave-relay-bin
--let $keep_include_silent=1
source include/rpl_start_server.inc;
--let $keep_include_silent=0
We want the paths ($tmpdir/slave-bin and $tmpdir/slave-relay-bin) not to be in the
result file.
mysql-test/suite/rpl/t/rpl_binlog_index.test:
Test case.
sql/log.cc:
When finding the corresponding log entry in the index file, we first
normalize the paths before doing the comparison. This will make relative
paths to be turned into absolute paths (based on the opt_bin_logname or
opt_relay_logname) and then compared against also, expanded paths entered,
through CHANGE MASTER for instance.
sql/log.h:
Added normalize_binlog_name, which turns relative paths, into absolute paths
given the parameter: is_relay_log ? opt_relay_logname : opt_bin_logname .
sql/mysqld.cc:
Exposing opt_bin_logname.
sql/mysqld.h:
Exposing opt_bin_logname.
The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_log_pos.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_packet.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_rotate_purge_deadlock.result:
new result file is added.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
The test of that bug can't satisfy windows and unix backslash interpretation so windows
execution is chosen to bypass.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock-master.opt:
new opt file is added.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock.test:
regression test is added as well as verification of a
possible side effect of the fixes is tried.
sql/log.cc:
LOCK_log is never taken during execution of log purging routine.
The former MYSQL_BIN_LOG::rotate_and_purge is made to necessarily
acquiring and releasing LOCK_log.
If caller takes the mutex itself it has to use a new rotate(), purge()
methods combination and to never let purge() be run with LOCK_log grabbed.
split apart to allow
the caller to chose either it
Simulation of concurrently rotating/purging threads is added.
sql/log.h:
new rotate(), purge() methods are added to be used instead of
the former rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
rotate_and_purge() signature is changed. Caller should not call rotate_and_purge()
but rather {rotate(), purge()} if LOCK_log is acquired by it.
sql/rpl_injector.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_class.h:
unnecessary constants are removed.
sql/sql_parse.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_reload.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_repl.cc:
followup for bug@11747416: the file name printing is changed to a relative
path instead of just the file name.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
