If a slave replicating an event has waited for more than
@@slave_abort_blocking_timeout for a conflicting metadata lock held by a
non-replication thread, the blocking query is killed to allow replication to
proceed and not be blocked indefinitely by a user query.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MySQL-Connector-Net casts SEQ_IN_INDEX to uint and will
raise an exception if the type is a System.Int64.
As we don't support a huge number of multi-columns in
an index reducing to a uint is sufficient to represent
all values and maintain compatibility with MySQL-Connector-Net.
This matches the type (uint) returned by MySQL-8.3 and 8.0.
Reviewer: Alexander Barkov <bar@mariadb.com>
(Variant 2b: call greedy_search() twice, correct handling for limited
search_depth)
Modify the join optimizer to specifically try to produce join orders that
can short-cut their execution for ORDER BY..LIMIT clause.
The optimization is controlled by @@optimizer_join_limit_pref_ratio.
Default value 0 means don't construct short-cutting join orders.
Other value means construct short-cutting join order, and prefer it only
if it promises speedup of more than #value times.
In Optimizer Trace, look for these names:
* join_limit_shortcut_is_applicable
* join_limit_shortcut_plan_search
* join_limit_shortcut_choice
Problem was that wsrep_schema tables were not marked as
category information. Fix allows access to wsrep_schema
tables even when node is detached.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replication of MyISAM and Aria DML is experimental and best
effort only. Earlier change make INSERT SELECT on both
MyISAM and Aria to replicate using TOI and STATEMENT
replication. Replication should happen only if user
has set needed wsrep_mode setting.
Note: This commit contains additional changes compared
to those already made for the 10.5 branch.
+ small refactoring after main fix.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
It's possible that MDL conflict handling code is called more
than once for a transaction when:
- it holds more than one conflicting MDL lock
- reschedule_waiters() is executed,
which results in repeated attempts to BF-abort already aborted
transaction.
In such situations, it might be that BF-aborting logic sees
a partially rolled back transaction and erroneously decides
on future actions for such a transaction.
The specific situation tested and fixed is when a SR transaction
applied in the node gets BF-aborted by a started TOI operation.
It's then caught with the server transaction already rolled back,
but with no MDL locks yet released. This caused wrong state
detection for such a transaction during repeated MDL conflict
handling code execution.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Fixes galera.galera_bf_kill_debug test case.
* Enable galera_ssl_upgrade, galera_ssl_reload, galera_pc_bootstrap
* Add MDEV to disabled tests that miss it
P.S. This commit contains additional changes compared
to the similar commit for 10.5 branch.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
After closing https://github.com/codership/galera-bugs/issues/947,
Galera now correctly certifies table-level keys, which made bulk
insert work again.
The corresponding MTR test is made deterministic and re-enabled.
Requires Galera 26.4.19
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Fixes galera.galera_bf_kill_debug test case.
* Enable galera_ssl_upgrade, galera_ssl_reload, galera_pc_bootstrap
* Add MDEV to disabled tests that miss it
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Based on logs SST was started before donor reached
Primaty state. Add wait_conditions to make sure that
nodes reach Primary state before starting next node.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
For TOI events specifically we have a situation where in case of the
same error different nodes may generate different messages. This may
be for two reasons:
- different locale setting between the current client session and
server default (we can reasonably require server locales to be
identical on all nodes, but user can change message locale for the
session)
- non-deterministic course of STATEMENT execution e.g. for ALTER TABLE
On the other hand we may reasonably expect TOI event failures since
they are executed after replication, so we must ensure that voting is
consistent. For that purpose error codes should be sufficiently unique
and deterministic for TOI event failures as DDLs normally deal with
a single object, so we can merely use MySQL error codes to vote on.
Notice that this problem does not happen with regular transactional
writesets, since the originator node will always vote success and
replica nodes are assumed to have the same global locale setting.
As such different error messages indicate different errors even if
the error code is the same (e.g. ER_DUP_KEY can happen on different
rows tables).
Use only MySQL error code (without the error message) for error voting
in case of TOI event failure.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The recent commit 4ca355d863 (MDEV-33894)
caused a serious regression for online InnoDB ib_logfile0 resizing,
breaking crash-safety unless the memory-mapped log file interface is
being used. However, the log resizing was broken also before this.
To prevent such regressions in the future, we extend the test
innodb.log_file_size_online with a kill and restart of the server
and with some writes running concurrently with the log size change.
When run enough many times, this test revealed all the bugs that
are being fixed by the code changes.
log_t::resize_start(): Do not allow the resized log to start before
the current log sequence number. In this way, there is no need to
copy anything to the first block of resize_buf. The previous logic
regarding that was incorrect in two ways. First, we would have to
copy from the last written buffer (buf or flush_buf). Second, we failed
to ensure that the mini-transaction end marker bytes would be 1
in the buffer. If the source ib_logfile0 had wrapped around an odd number
of times, the end marker would be 0. This was occasionally observed
when running the test innodb.log_file_size_online.
log_t::resize_write_buf(): To adjust for the resize_start() change,
do not write anything that would be before the resize_lsn.
Take the buffer (resize_buf or resize_flush_buf) as a parameter.
Starting with commit 4ca355d863
we no longer swap buffers when rewriting the last log block.
log_t::append(): Define as a static function; only some debug
assertions need to refer to the log_sys object.
innodb_log_file_size_update(): Wake up the buf_flush_page_cleaner()
if needed, and wait for it to complete a batch while waiting for
the log resizing to be completed. If the current LSN is behind the
resize target LSN, we will write redundant FILE_CHECKPOINT records to
ensure that the log resizing completes. If the buf_pool.flush_list is
empty or the buf_flush_page_cleaner() is stuck for some reason, our wait
will time out in 5 seconds, so that we can periodically check if the
execution of SET GLOBAL innodb_log_file_size was aborted. Previously,
we could get into a busy loop here while the buf_flush_page_cleaner()
would remain idle.
Problem was that wsrep_schema tables were not marked as
category information. Fix allows access to wsrep_schema
tables even when node is detached.
This is 10.4-10.9 version of fix.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that we did not found that table was partitioned
and then we should find what is actual underlaying storage
engine.
We should not use RSU for !InnoDB tables.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The option binlog_optimize_thread_scheduling was initially added
to provide a safe alternative for the newly added binlog group
commit logic, such that when 0, it would disable a leader thread
from performing the binlog write for all transactions that are a
part of the group commit. Any problems related to the binlog group
commit optimization should be sorted out by now, so we can
deprecate-to-eventually-remove the option altogether.
This commit performs the deprecation, and the removal is tracked
by MDEV-33745. Note, as the option is only able to be provided
via configuration at startup time, users will not see a
deprecation message unless looking through the CLI help
message.
Reviewed By
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Sergei Golubchik <serg@mariadb.org>
Changing the alias LOCALTIME->CURRENT_TIMESTAMP to LOCALTIME->CURRENT_TIME.
This changes the return type of LOCALTIME from DATETIME to TIME,
according to the SQL Standard.
In commit fa8a46eb68 (MDEV-33613)
the parameter innodb_lru_flush_size ceased to have any effect.
Let us declare the parameter as deprecated and additionally as
MARIADB_REMOVED_OPTION, so that there will be a warning written
to the error log in case the option is specified in the command line.
Let us also do the same for the parameter
innodb_purge_rseg_truncate_frequency
that was deprecated&ignored earlier in MDEV-32050.
Reviewed by: Debarun Banerjee
Let us avoid EXTENDED in the CHECK TABLE after a defragmentation,
because it would occasionally report an orphan delete-marked record
in the index "third". That error does not seem to be reproducible
when using the regular OPTIMIZE TABLE.
Also, let us make the test --repeat safe by removing the defragmentation
related statistics after DROP TABLE.
The defragmentation feature was removed in later releases in
commit 7ca89af6f8 (MDEV-30545)
along with this test case.
The test was expecting the I/O thread to be in a specific state, but thread
scheduling may cause it to not yet have reached that state. So just have a
loop that waits for the expected state to occur.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Remove the test for MDEV-14528. This is supposed to test that parallel
replication from pre-10.0 master will update Seconds_Behind_Master. But
after MDEV-12179 the SQL thread is blocked from even beginning to fetch
events from the relay log due to FLUSH TABLES WITH READ LOCK, so the test
case is no longer testing what is was intended to. And pre-10.0 versions are
long since out of support, so does not seem worthwhile to try to rewrite the
test to work another way.
The root cause of the test failure is MDEV-34778. Briefly, depending on
exact timing during slave stop, the rli->sql_thread_caught_up flag may end
up with different value. If it ends up as "true", this causes
Seconds_Behind_Master to be 0 during next slave start; and this caused test
case timeout as the test was waiting for Seconds_Behind_Master to become
non-zero.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Depending on timing, an extra event run could start just when the event
scheduler is shut down and delay running until after the table has been
dropped; this would cause the test to fail with a "table does not exist"
error in the log.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
In a Sysbench oltp_update_index workload that involves 1 table,
a serious contention between the workload and the purge of history
was observed. This was the worst when the table contained only 1 record.
This turned out to be fixed by setting innodb_purge_batch_size=128,
which corresponds to the number of usable persistent rollback segments.
When we go above that, there would be contention between row_purge_poss_sec()
and the workload, typically on the clustered index page latch, sometimes
also on a secondary index page latch. It might be that with smaller
batches, trx_sys.history_size() will end up pausing all concurrent
transaction start/commit frequently enough so that purge will be able
to make some progress, so that there would be less contention on the
index page latches between purge and SQL execution.
In commit aa719b5010 (part of MDEV-32050)
the interpretation of the parameter innodb_purge_batch_size was slightly
changed. It would correspond to the maximum desired size of the
purge_sys.pages cache. Before that change, the parameter was referring to
a number of undo log pages, but the accounting might have been inaccurate.
To avoid a regression, we will reduce the default value to
innodb_purge_batch_size=127, which will also be compatible with
innodb_undo_tablespaces>1 (which will disable rollback segment 0).
Additionally, some logic in the purge and MVCC checks is simplified.
The purge tasks will make use of purge_sys.pages when accessing undo
log pages to find out if a secondary index record can be removed.
If an undo page needs to be looked up in buf_pool.page_hash, we will
merely buffer-fix it. This is correct, because the undo pages are
append-only in nature. Holding purge_sys.latch or purge_sys.end_latch
or the fact that the current thread is executing as a part of an
in-progress purge batch will prevent the contents of the undo page from
being freed and subsequently reused. The buffer-fix will prevent the
page from being evicted form the buffer pool. Thanks to this logic,
we can refer to the undo log record directly in the buffer pool page
and avoid copying the record.
buf_pool_t::page_fix(): Look up and buffer-fix a page. This is useful
for accessing undo log pages, which are append-only by nature.
There will be no need to deal with change buffer or ROW_FORMAT=COMPRESSED
in that case.
purge_sys_t::view_guard::view_guard(): Allow the type of guard to be
acquired: end_latch, latch, or no latch (in case we are a purge thread).
purge_sys_t::view_guard::get(): Read-only accessor to purge_sys.pages.
purge_sys_t::get_page(): Invoke buf_pool_t::page_fix().
row_vers_old_has_index_entry(): Replaced with row_purge_is_unsafe()
and row_undo_mod_sec_unsafe().
trx_undo_get_undo_rec(): Merged to trx_undo_prev_version_build().
row_purge_poss_sec(): Add the parameter mtr and remove redundant
or unused parameters sec_pcur, sec_mtr, is_tree. We will use the
caller's mtr object but release any acquired page latches before
returning.
btr_cur_get_page(), page_cur_get_page(): Do not invoke page_align().
row_purge_remove_sec_if_poss_leaf(): Return the value of PAGE_MAX_TRX_ID
to be checked against the page in row_purge_remove_sec_if_poss_tree().
If the secondary index page was not changed meanwhile, it will be
unnecessary to invoke row_purge_poss_sec() again.
trx_undo_prev_version_build(): Access any undo log pages using
the caller's mini-transaction object.
row_purge_vc_matches_cluster(): Moved to the only compilation unit that
needs it.
Reviewed by: Debarun Banerjee
When executing a Query_log_event that is a COMMIT query,
gtid_slave_pos is updated before other replication status
variables, so when an MTR test syncs a replica with
primaries via GTID, there is a slight window where accessing
status variables, e.g. via SHOW ALL SLAVES STATUS, results
in "stale" values because gtid_slave_pos has been updated
before the *_last_event_time fields have been updated.
This patch only fixes the test by switching from using
GTIDs to using binlog file coordinates when synchronizing
replicas with their primaries.
In a merge, an mtr.call_suppression was erroneously removed
for "Got an error writing communication packets". So when
the error would expectedly occur, the test would fail.
This patch adds this suppression back.
Note that the test will still fail due MDEV-34799, which
is to be fixed in 10.6.
The test requires a larger innodb log file size; this was lost as a
side-effect of d7699c51eb.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Clarify confusing comments in the previous commit, and note that the failure
started after push of MDEV-34504.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
- Added plugin_debug.test, multiple_index.test to innodb_fts suite
from mysql-5.7.
- commit c5b28e55f6 removes the warning
for InnoDB rebuilding table to add FTS_DOC_ID
- multiple_index test case has MATCH(a) values are smaller
than in MySQL because ROLLBACK updates the stat_n_rows.
- st_mysql_ftparser_boolean_info structure conveys boolean
metadata to mysql search engine for every word in the query.
This structure misses the position value to store the correct
offset of every word. So phrase search queries in plugin_debug
test case with boolean mode for simple parser throws
wrong result.
int wsrep_thd_append_key(THD*, const wsrep_key*, int, Wsrep_service_key_type)
CREATE TABLE [SELECT|REPLACE SELECT] is CTAS and idea was that
we force ROW format. However, it was not correctly enforced
and keys were appended before wsrep transaction was started.
At THD::decide_logging_format we should force used stmt binlog
format to ROW in CTAS case and produce a warning if used
binlog format was not ROW.
At ha_innodb::update_row we should not append keys similarly
as in ha_innodb::write_row if sql_command is SQLCOM_CREATE_TABLE.
Improved error logging on ::write_row, ::update_row and ::delete_row
if wsrep key append fails.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
1. it links with ${SSL_LIBRARIES}, in WolfSSL builds it's a static
library, so when a plugin is loaded there will be two copies of
wolfssl in the same address space. It breaks odr (at least).
2. Plugin can linked with OpenSSL and the server with WolfSSL or
vice versa. It might load, but then we'll have both WolfSSL and
OpenSSL at the same time. Kind of risky.
Fix: link the plugin statically into the server if it's a WolfSSL build
adjust tests to work with static and dynamic parsec
here MSAN complains that
==218853==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x7f84a77c60a3 in _gnutls_rnd_init /tmp/msan/lib/random.c:69:6
#1 0x7f84a77c60a3 in gnutls_rnd /tmp/msan/lib/random.c:168:6
but the line lib/random.c:69 in gnutls-3.7.1 is
69 if (unlikely(!rnd_initialized)) {
and rnd_initialized is declared as
40 static _Thread_local unsigned rnd_initialized = 0;
which apparently MSAN isn't happy with
PARSEC: Password Authentication using Response Signed with Elliptic Curve
new authentication plugin that uses salted passwords,
key derivation, extensible password storage format,
and both server- and client-side scrambles.
It signs the response with ed25519, but it uses stock
unmodified ed25519 as provided by OpenSSL/WolfSSL/GnuTLS.
Edited by: Sergei Golubchik
Assertion `table->field[0]->ptr >= table->record[0] &&
table->field[0]->ptr <= table->record[0] + table->s->reclength' failed in
handler::assert_icp_limitations.
table->move_fields has some limitations:
1. It cannot be used in cascade
2. It should always have a restoring pair.
Rule 1 is covered by assertions in handler::assert_icp_limitations
and handler::ptr_in_record (commit 30894fe9a9).
Rule 2 should be manually maintained with care. Hopefully, the rule 1 assertions
may sometimes help as well.
In ha_myisam::repair, both rules are broken. table->move_fields is used
asymmetrically there: it is set on every param->fix_record call
(i.e. in compute_vcols) but is restored only once, in the end of repair.
The reason to updating field ptr's for every call is that compute_vcols can
(supposedly) be called in parallel, that is, with the same table, but different
records.
The condition to "unmove" the pointers in ha_myisam::restore_vcos_after_repair
is incorrect, when stored vcols are available, and myisam stores a VIRTUAL field
if it's the only field in the table (the record cannot be of zero length).
This patch solves the problem by "unmoving" the pointers symmetrically, in
compute_vcols. That is, both rules will be preserved maintained.
Before this change the unix socket auth plugin returned true only when
the OS socket user id matches the MariaDB user name.
The authentication string was ignored.
Now if an authentication string is defined with in `unix_socket`
authentication rule, then the authentication string will be used to
compare with the socket's user name, and the plugin will return a
positive if matching.
Make the plugin to fill in the @@external_user variable.
This change is similar to MySQL commit of
https://github.com/mysql/mysql-server/commit/6ddbc58e.
However there's one difference with above commit:
- For MySQL, both Unix user matches DB user name and Unix user matches the
authentication string will be allowed to connect.
- For MariaDB, we only allows the Unix user matches the authentication
string to connect, if the authentication string is defined.
This is because allowing both Unix user names has risks and couldn't
handle the case that a customer only wants to allow one single Unix user
to connect which doesn't matches the DB user name.
If DB user is created with multiple unix_socket options for example:
`create user A identified via unix_socket as 'B' or unix_socket as 'C';`
Then both Unix user of B and C are accepted.
Existing MTR test of `plugins.unix_socket` is not impacted.
Also add a new MTR test to verify authentication with authentication
string. See the MTR test cases for supported/unsupported cases.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
in bintars the server is linked with wolfssl, while the connector
is linked with gnutls. Thus client_ed25519.so gets gnutls
dependency, unresolved symbols and it cannot be loaded into the
server and gnutls symbols aren't present there.
linking the plugin statically with gnutls fixes that and the test passes.
but when such a plugin is loaded into the client, the client gets
two copies of gnutls - they conflict and ssl doesn't work at all.
let's detect this and disable the test for now.
Modified node config with longer timeouts for suspect,
inactive, install and wait_prim timeout. Increased
node_1 weight to keep it primary component when
other nodes are voted out.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replication of MyISAM and Aria DML is experimental and best
effort only. Earlier change make INSERT SELECT on both
MyISAM and Aria to replicate using TOI and STATEMENT
replication. Replication should happen only if user
has set needed wsrep_mode setting.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Fixed used configuration and added suppression for warning
message. Test case changes only.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Modified test configuration file to use wsrep_sync_wait
to make sure committed transactions are replicated before
next operation.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
note that:
* unit.conc_tls is broken in mtr
* schannel now doesn't fail on invalid ca path unless
--ssl-verify-server-cert is used. openssl still does.
Reason:
======
- InnoDB fails to load the instant alter table metadata from
clustered index while loading the table definition.
The reason is that InnoDB metadata blob has the column length
exceeds maximum fixed length column size.
Fix:
===
- InnoDB should treat the long fixed length column as variable
length fields that needs external storage while initializing
the field map for instant alter operation
Problem:
========
- After the commit ada1074bb1 (MDEV-14398)
fil_crypt_set_encrypt_tables() iterates through all tablespaces to
fill the default_encrypt tables list. This was a trigger to
encrypt or decrypt when key rotation age is set to 0. But import
tablespace does call fil_crypt_set_encrypt_tables() unnecessarily.
The motivation for the call is to signal the encryption threads.
Fix:
====
ha_innobase::discard_or_import_tablespace: Remove the
fil_crypt_set_encrypt_tables() and add the import tablespace
to the default encrypt list if necessary
- commit 85db534731 (MDEV-33400)
retains the instantness in the table definition after discard
tablespace. So there is no need to assign n_core_null_bytes
during instant table preparation unless they are not
initialized.
- During copy algorithm, InnoDB should use bulk insert operation
for row by row insert operation. By doing this, copy algorithm
can effectively build indexes. This optimization is disabled
for temporary table, versioning table and table which has
foreign key relation.
Introduced the variable innodb_alter_copy_bulk to allow
the bulk insert operation for copy alter operation
inside InnoDB. This is enabled by default
ha_innobase::extra(): HA_EXTRA_END_ALTER_COPY mode tries to apply
the buffered bulk insert operation, updates the non-persistent
table stats.
row_merge_bulk_t::write_to_index(): Update stat_n_rows after
applying the bulk insert operation
row_ins_clust_index_entry_low(): In case of copy algorithm,
switch to bulk insert operation.
copy_data_error_ignore(): Handles the error while copying
the data from source to target file.
(With trivial fixes by sergey@mariadb.com)
Added option fix_innodb_cardinality to optimizer_adjust_secondary_key_costs
Using fix_innodb_cardinality disables the 'divide by 2' of rec_per_key_int
in InnoDB that in effect doubles the Cardinality for secondary keys.
This has the biggest effect for indexes where a few rows has the same key
value. Using this may also cause table scans for very small tables (which
in some cases may be better than an index scan).
The user visible effect is that 'SHOW INDEX FROM table_name' will for
InnoDB show the true Cardinality (and not 2x the real value). It will
also allow the optimizer to chose a better index in some cases as the
division by 2 could have a bad effect for tables with 2-5 identical values
per key.
A few notes about using fix_innodb_cardinality:
- It has direct affect for SHOW INDEX FROM table_name. SHOW INDEX
will also update the statistics in table share.
- The effect of fix_innodb_cardinality for query plans or EXPLAIN
is only visible after first open of the table. This is why one must
do a flush tables or use SHOW INDEX for the option to take effect.
- Using fix_innodb_cardinality can thus affect all user in their query
plans if they are using the same tables.
Because of this, it is strongly recommended that one uses
optimizer_adjust_secondary_key_costs=fix_innodb_cardinality mainly
in configuration files to not cause issues for other users.
This commit adds 3 new status variables to 'show all slaves status':
- Master_last_event_time ; timestamp of the last event read from the
master by the IO thread.
- Slave_last_event_time ; Master timestamp of the last event committed
on the slave.
- Master_Slave_time_diff: The difference of the above two timestamps.
All the above variables are NULL until the slave has started and the
slave has read one query event from the master that changes data.
- Added information_schema.slave_status, which allows us to remove:
- show_master_info(), show_master_info_get_fields(),
send_show_master_info_data(), show_all_master_info()
- class Sql_cmd_show_slave_status.
- Protocol::store(I_List<i_string_pair>* str_list) as it is not
used anymore.
- Changed old SHOW SLAVE STATUS and SHOW ALL SLAVES STATUS to
use the SELECT code path, as all other SHOW ... STATUS commands.
Other things:
- Xid_log_time is set to time of commit to allow slave that reads the
binary log to calculate Master_last_event_time and
Slave_last_event_time.
This is needed as there is not 'exec_time' for row events.
- Fixed that Load_log_event calculates exec_time identically to
Query_event.
- Updated RESET SLAVE to reset Master/Slave_last_event_time
- Updated SQL thread's update on first transaction read-in to
only update Slave_last_event_time on group events.
- Fixed possible (unlikely) bugs in sql_show.cc ...old_format() functions
if allocation of 'field' would fail.
Reviewed By:
Brandon Nesterenko <brandon.nesterenko@mariadb.com>
Kristian Nielsen <knielsen@knielsen-hq.org>
When there is no bounds on the upper or lower part of the window,
it doesn't matter if the type is numeric.
It also doesn't matter how many ORDER BY items there are in the
query.
Reviewers: Sergei Petrunia and Oleg Smirnov
When mysqldump is run to dump the `mysql` system database, it generates
INSERT statements into the table `mysql.gtid_slave_pos`.
After running the backup script
those inserts did not produce the expected gtid state on slave. In
particular the maximum of mysql.gtid_slave_pos.sub_id did not make
into
rpl_global_gtid_slave_state.last_sub_id
an in-memory object that is supposed to match the current state of the
table. And that was regardless of whether --gtid option was specified
or not. Later when the backup recipient server starts as slave
in *non-gtid* mode this desychronization may lead to a duplicate key
error.
This effect is corrected for --gtid mode mysqldump/mariadb-dump only
as the following. The fixes ensure the insert block of the dump
script is followed with a "summing-up" SET @global.gtid_slave_pos
assignment.
For the implemenation part, note a deferred print-out of
SET-gtid_slave_pos and associated comments is prefered over relocating
of the entire blocks if (opt_master,slave_data &&
do_show_master,slave_status) ... because of compatiblity
concern. Namely an error inside do_show_*() is handled in the new code
the same way, as early as, as before.
A regression test can be run in how-to-reproduce mode as well.
One affected mtr test observed.
rpl_mysqldump_slave.result "mismatch" shows now the new deferring print
of SET-gtid_slave_pos policy in action.
The test was missing a save_master_gtid.inc on the master,
leading to the slave thinking it was in sync after executing
sync_with_master_gtid.inc, despite not having executed the
latest transaction. This skipped transaction, XA COMMIT,
was supposed to error-to-be-ignored because its XID could not
be found, but be thrown out because the replication filters
would filter out the target database. However, if the slave
was able to stop before executing the transaction, then
the replication filer is reset (to empty), and when the
slave is later restarted, that transactions error would
no longer be ignored.
Additionally, as the test cases added in MDEV-33921 rely
on GTID synchronization, the test cases now force
master_use_gtid=slave_pos for consistency
There are 3 diff in result:
1) NULL value from SELECT
Due to incorrect truncating of the hex value, incorrect value is
written instead of original value to the view frm. This results in reading
incorrect value from frm, so eventual result is NULL.
2) 'Name_exp1' in column name (in gis.test)
This was because the identifier in SELECT is longer than 64 characters,
so 'Name_exp1' alias is also written to the view frm.
3)diff in explain extended
This was because the query plan for view protocol doesn't
contain database name. As a fix, disable view protocol for that particular
query.
- Fix view-protocol: long expressions in SELECT
list should have "expr AS column_name".
- Also, moved the test from subselect*test to
suite/json/t/json_table.test.
- During XA PREPARE, InnoDB releases the non-exclusive locks.
But it fails to remove the non-exclusive table lock from the
transaction table locks. In the mean time, main thread evicts
the table from the LRU cache. While rollbacking the XA transaction,
InnoDB iterates through the table locks to check whether it
holds lock on any system tables and wrongly assumes the
evicted table as system table since the table id is 0
Fix:
===
During XA PREPARE, remove the table locks of the transaction while
releasing the non-exclusive locks.
Simplify in an attempt to avoid:
mysqltest: At line 275: File already exist: on the write_file
lines.
Using write_line as that's what a lot of other tests
do for writing small bits to a expect file.
Review thanks Valdislav Vaintroub
Problem:
========
- innodb.temp_truncate_freed fails with ER_WRONG_ARGUMENTS and
states that another buffer pool resize is already in progress.
Test case has wait condition to ensure that buffer pool
resize is completed. There is a possibility that wait condition
check could get false impression that InnoDB buffer pool resize
completed due to previous buffer pool resize.
Fix:
===
Add more elaborate wait_condition to ensure the current buffer
pool resize completed.
buf_pool_t::resize(): Set the buffer pool resize status only
after setting previous buffer pool size to current buffer pool
size. This should help the test case to make reliable.
Trivial batch, using the handler statistics already collected for
the slow query log.
The reason for the changes in test cases was mainly to change to use
select TABLE_SCHEMA ... from information_schema.table_statistics instead
of 'show table_statistics' to avoid future changes to test results
if we add more columns to table_statistics.
MDEV-34274 did not fix the test failure. The test has a START SLAVE
UNTIL condition, where we can't use sync_with_master_gtid.inc,
wait_for_slave_to_start.inc, or wait_for_slave_to_stop.inc because
our MTR connection thread races with the start/stop of the SQL/IO
threads. So instead, for slave start, we prove the threads started
by waiting for the connection count to increase by 2; and for slave
stop, we wait for the processlist count to return to its pre start
slave number.
Note this is a backport of 8c8b3ab784
from 11.1.
The test rpl.rpl_change_master_demote used a `sleep 1` command
to give time for a START SLAVE UNTIL to start the slave threads
and wait for them to automatically die by UNTIL. On machines
with heavy load (especially MSAN bb builders), one second was
not enough, and the test would fail due to the IO thread
still being up.
This patch fixes the test by replacing the sleep with specific
conditions to wait for. The test cannot wait for the IO or SQL
threads to start, as it would be possible that they would be
started and stopped by the time the MTR executor would check
the slave status. So instead, we test for proof that they
existed via the Connections status variable being incremented
by at least 2 (Connections just shows the global thread id).
At this point, we still can't use the wait_for_slave_to_stop
helper, as the SQL/IO_Running fields of SHOW SLAVE STATUS
may not be updated yet. So instead, we use
information_schema.processlist, which would show the presence
of the Slave_SQL/IO threads. So to "wait for the slave to stop",
we wait for the Slave_SQL/IO threads to be gone from the
processlist.
The issue was that the test did not take into account that the IO thread
could have been in COMMAND=Connecting state, which happens before the
COMMANMD=Slave_IO state.
The test is a bit fragile as it depends on the COMMAND state to be
syncronised with the Slave_IO_State, which is not the case.
I added a new proc state and some more information to the error
output to be able to diagnose future failures more easily.
Improve performance of queries like
SELECT * FROM t1 WHERE field = NAME_CONST('a', 4);
by, in this example, replacing the WHERE clause with field = 4
in the case of ref access.
The rewrite is done during fix_fields and we disambiguate this
case from other cases of NAME_CONST by inspecting where we are
in parsing. We rely on THD::where to accomplish this. To
improve performance there, we change the type of THD::where to
be an enumeration, so we can avoid string comparisons during
Item_name_const::fix_fields. Consequently, this patch also
changes all usages of THD::where to conform likewise.
There are two problems.
First, replication fails when XA transactions are used where the
slave has replicate_do_db set and the client has touched a different
database when running DML such as inserts. This is because XA
commands are not treated as keywords, and are thereby not exempt
from the replication filter. The effect of this is that during an XA
transaction, if its logged “use db” from the master is filtered out
by the replication filter, then XA END will be ignored, yet its
corresponding XA PREPARE will be executed in an invalid state,
thereby breaking replication.
Second, if the slave replicates an XA transaction which results in
an empty transaction, the XA START through XA PREPARE first phase of
the transaction won’t be binlogged, yet the XA COMMIT will be
binlogged. This will break replication in chain configurations.
The first problem is fixed by treating XA commands in
Query_log_event as keywords, thus allowing them to bypass the
replication filter. Note that Query_log_event::is_trans_keyword() is
changed to accept a new parameter to define its mode, to either
check for XA commands or regular transaction commands, but not both.
In addition, mysqlbinlog is adapted to use this mode so its
--database filter does not remove XA commands from its output.
The second problem fixed by overwriting the XA state in the XID
cache to be XA_ROLLBACK_ONLY, so at commit time, the server knows to
rollback the transaction and skip its binlogging. If the xid cache
is cleared before an XA transaction receives its completion command
(e.g. on server shutdown), then before reporting ER_XAER_NOTA when
the completion command is executed, the filter is first checked if
the database is ignored, and if so, the error is ignored.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
PURGE BINARY LOGS did not always purge binary logs. This commit fixes
some of the issues and adds notifications if a binary log cannot be
purged.
User visible changes:
- 'PURGE BINARY LOG TO log_name' and 'PURGE BINARY LOGS BEFORE date'
worked differently. 'TO' ignored 'slave_connections_needed_for_purge'
while 'BEFORE' did not. Now both versions ignores the
'slave_connections_needed_for_purge variable'.
- 'PURGE BINARY LOG..' commands now returns 'note' if a binary log cannot
be deleted like
Note 1375 Binary log 'master-bin.000004' is not purged because it is
the current active binlog
- Automatic binary log purges, based on date or size, will write a
note to the error log if a binary log matching the size or date
cannot yet be deleted.
- If 'slave_connections_needed_for_purge' is set from a config or
command line, it is set to 0 if Galera is enabled and 1 otherwise
(old default). This ensures that automatic binary log purge works
with Galera as before the addition of
'slave_connections_needed_for_purge'.
If the variable is changed to 0, a warning will be printed to the error
log.
Code changes:
- Added THD argument to several purge_logs related functions that needed
THD.
- Added 'interactive' options to purge_logs functions. This allowed
me to remove testing of sql_command == SQLCOM_PURGE.
- Changed purge_logs_before_date() to first check if log is applicable
before calling can_purge_logs(). This ensures we do not get a
notification for logs that does not match the remove criteria.
- MYSQL_BIN_LOG::can_purge_log() will write notifications to the user
or error log if a log cannot yet be removed.
- log_in_use() will return reason why a binary log cannot be removed.
Changes to keep code consistent:
- Moved checking of binlog_format for Galera to be after Galera is
initialized (The old check never worked). If Galera is enabled
we now change the binlog_format to ROW, with a warning, instead of
aborting the server. If this change happens a warning will be printed to
the error log.
- Print a warning if Galera or FLASHBACK changes the binlog_format
to ROW. Before it was done silently.
Reviewed by: Sergei Golubchik <serg@mariadb.com>,
Kristian Nielsen <knielsen@knielsen-hq.org>
- Column stat_value and sample_size in mysql.innodb_index_stats
table is declared as BIGINT UNSIGNED without any check constraint.
user manually updates the value of stat_value and sample_size
to zero. InnoDB aborts the server while reading the statistics
information because InnoDB expects at least one leaf
page to exist for the index.
- To fix this issue, InnoDB should interpret the value of
stat_n_leaf_pages, stat_index_size in innodb_index_stats
stat_clustered_index_size, stat_sum_of_other_index_sizes
in innodb_table_stats as valid one even though user
mentioned it as 0.
Builders:
- amd64-fedora-38-last-N-failed
- amd64-debian-10-last-N-failed
erroneously execute MTR for these files:
- rpl/include/rpl_extra_col_master.test
- rpl/include.rpl_binlog_max_cache_size.test
- rpl/include.rpl_charset.test
when these files are changed by a commit.
Changing their extension from *.test to *.inc to avoid this.
The problem was in error message suppression, which did not match
the actual warning messages, due to bad quotations.
Changed warnings message suppressions to more simple format.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
DML transactions on FK-child tables also get table locks
on FK-parent tables. If there is a DML transaction holding
such a lock, and a TOI transaction starts, the latter
BF-aborts the former and puts itself into a waiting state.
If at this moment another DML transaction on FK-child table
starts, it doesn't check that the transaction waiting on
a parent table lock is TOI, and it erroneously BF-aborts
the waiting TOI transaction.
The fix: don't roll back high-priority transaction waiting
on a lock in InnoDB, instead roll back an incoming DML
transaction.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The IO thread can report error code 2013 into the error log when it
is stopped during the initial connection process to the primary, as
well as when trying to read an event. However, because the IO thread
is being stopped, its connection to the primary is force-killed by
the signaling thread (see THD::awake_no_mutex()), and thereby these
connection errors should be ignored.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Several variables declared in mysqld.h appear to be old system variables
that have been left over after deprecation. Delete them using IDE
refactoring to automatically search for other uses. Most cases had no
other uses in the code.
slave_allow_batching had a test that was effectively unused, as the
result was only
-ERROR HY000: Unknown system variable 'slave_allow_batching'
so that was deleted as well.
Build and test still works without issue as expected.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services.
The current semi-sync binlog fail-over recovery process uses
rpl_semi_sync_slave_enabled==TRUE as its condition to truncate a
primary server’s binlog, as it is anticipating the server to re-join
a replication topology as a replica. However, for servers configured
with both rpl_semi_sync_master_enabled=1 and
rpl_semi_sync_slave_enabled=1, if a primary is just re-started (i.e.
retaining its role as master), it can truncate its binlog to drop
transactions which its replica(s) has already received and executed.
If this happens, when the replica reconnects, its gtid_slave_pos can
be ahead of the recovered primary’s gtid_binlog_pos, resulting in an
error state where the replica’s state is ahead of the primary’s.
This patch changes the condition for semi-sync recovery to truncate
the binlog to instead use the configuration variable
--init-rpl-role, when set to SLAVE. This allows for both
rpl_semi_sync_master_enabled and rpl_semi_sync_slave_enabled to be
set for a primary that is restarted, and no transactions will be
lost, so long as --init-rpl-role is not set to SLAVE.
Reviewed By:
============
Sergei Golubchik <serg@mariadb.com>
The special logic used by the memory storage engine
to keep slaves in sync with the master on a restart can
break replication. In particular, after a restart, the
master writes DELETE statements in the binlog for
each MEMORY-based table so the slave can empty its
data. If the DELETE is not executable, e.g. due to
invalid triggers, the slave will error and fail, whereas
the master will never see the problem.
Instead of DELETE statements, use TRUNCATE to
keep slaves in-sync with the master, thereby bypassing
triggers.
Reviewed By:
===========
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
During read only mode, InnoDB doesn't allow checkpoint to happen.
So InnoDB should throw the warning when InnoDB tries to
force the checkpoint when innodb_read_only = 1 or
innodb_force_recovery = 6.
The feedback plugin server_uid variable and the calculate_server_uid()
function is moved from feedback/utils.cc to sql/mysqld.cc
server_uid is added as a global variable (shown in 'show variables') and
is written to the error log on server startup together with server version
and server commit id.
We have an issue if a user have the following in a configuration file:
log_slow_filter="" # Log everything to slow query log
log_queries_not_using_indexes=ON
This set log_slow_filter to 'not_using_index' which disables
slow_query_logging of most queries.
In effect, on should never use log_slow_filter="" in config files but
instead use log_slow_filter=ALL.
Fixed by changing log_slow_filter="" that comes either from a
configuration file or from the command line, when starting to the server,
to log_slow_filter=ALL.
A warning will be printed when this happens.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
(backported from 10.6)
InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Affects:
MDEV-34150 Assertion failure in Diagnostics_area::set_error_status upon binary
logging hitting tmp space limit
MDEV-9101 Limit size of created disk temporary files and tables
This bug was caused by moving flushing of the in-memory-row-events from
close_thread_tables() to binlog_commit() in MDEV-34150.
This was needed to be able to handle the case where binlog writes could
fail.
Galera have two case where the change caused problems:
- Row events in commit_one_phase_2() was not done in the case the standard
binary log was not enabled but Galera was using the binary log
internally.
- Galera disabled the call to binlog_commit_flush_stmt_cache() for not
ending transactions.
Fixed by adding code that flushes the in-memory-row-events to the binary
log (write, but now sync) in the two above cases if Galera is enabled.
realloc can't be done for mysql->passwd. There's also no pretty way to
pass the ext-salt into hash_password, so let's use thread_local instead.
For GCC < 4.9 (SLES 12, CentOS 7), which don't support _Thread_local,
pk will be recalculated instead
As part of commit 685d958e38 (MDEV-14425)
the parameter innodb_log_write_ahead_size was removed, because it was
thought that determining the physical block size would be a sufficient
replacement.
However, we can only determine the physical block size on Linux or
Microsoft Windows. On some file systems, the physical block size
is not relevant. For example, XFS uses a block size of 4096 bytes
even if the underlying block size may be smaller.
On Linux, we failed to determine the physical block size if
innodb_log_file_buffered=OFF was not requested or possible.
This will be fixed.
log_sys.write_size: The value of the reintroduced parameter
innodb_log_write_ahead_size. To keep it simple, this is read-only
and a power of two between 512 and 4096 bytes, so that the previous
alignment guarantees are fulfilled. This will replace the previous
log_sys.get_block_size().
log_sys.block_size, log_t::get_block_size(): Remove.
log_t::set_block_size(): Ensure that write_size will not be less
than the physical block size. There is no point to invoke this
function with 512 or less, because that is the minimum value of
write_size.
innodb_params_adjust(): Add some disabled code for adjusting
the minimum value and default value of innodb_log_write_ahead_size
to reflect the log_sys.write_size.
log_t::set_recovered(): Mark the recovery completed. This is the
place to adjust some things if we want to allow write_size>4096.
log_t::resize_write_buf(): Refer to write_size.
log_t::resize_start(): Refer to write_size instead of get_block_size().
log_write_buf(): Simplify some arithmetics and remove a goto.
log_t::write_buf(): Refer to write_size. If we are writing less than
that, do not switch buffers, but keep writing to the same buffer.
Move some code to improve the locality of reference.
recv_scan_log(): Refer to write_size instead of get_block_size().
os_file_create_func(): For type==OS_LOG_FILE on Linux, always invoke
os_file_log_maybe_unbuffered(), so that log_sys.set_block_size() will
be invoked even if we are not attempting to use O_DIRECT.
recv_sys_t::find_checkpoint(): Read the entire log header
in a single 12 KiB request into log_sys.buf.
Tested with:
./mtr --loose-innodb-log-write-ahead-size=4096
./mtr --loose-innodb-log-write-ahead-size=2048
innodb_doublewrite_update(): Disallow any change if srv_read_only_mode
holds, that is, the server was started with innodb_read_only=ON or
innodb_force_recovery=6.
This fixes up commit 1122ac978e (MDEV-33545).
New error codes can only be added in the latest major version.
Adding ER_KILL_DENIED_HIGH_PRIORITY would shift by one all
error codes that were added in MariaDB Server 10.6 or later.
This amends commit 1001dae186
Suggested by: Sergei Golubchik
- Few of test case should make sure that InnoDB does hit
the debug sync point during startup of the server.
InnoDB can remove the double quotes of debug point
in restart parameters.
