:: Syntax change ::
Keyword AUTO enables history partition auto-creation.
Examples:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 MONTH
STARTS '2021-01-01 00:00:00' AUTO PARTITIONS 12;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME LIMIT 1000 AUTO;
Or with explicit partitions:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO
(PARTITION p0 HISTORY, PARTITION pn CURRENT);
To disable or enable auto-creation one can use ALTER TABLE by adding
or removing AUTO from partitioning specification:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
# Disables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR;
# Enables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
If the rest of partitioning specification is identical to CREATE TABLE
no repartitioning will be done (for details see MDEV-27328).
:: Description ::
Before executing history-generating DML command (see the list of commands below)
add N history partitions, so that N would be sufficient for potentially
generated history. N > 1 may be required when history partitions are switched
by INTERVAL and current_timestamp is N times further than the interval
boundary of the last history partition.
If the last history partition equals or exceeds LIMIT records then new history
partition is created and selected as the working partition. According to
MDEV-28411 partitions cannot be switched (or created) while the command is
running. Thus LIMIT does not carry strict limitation and the history partition
size must be planned as LIMIT value plus average number of history one DML
command can generate.
Auto-creation is implemented by synchronous fast_alter_partition_table() call
from the thread of the executed DML command before the command itself is run
(by the fallback and retry mechanism similar to Discovery feature,
see Open_table_context).
The name for newly added partitions are generated like default partition names
with extension of MDEV-22155 (which avoids name clashes by extending assignment
counter to next free-enough gap).
These DML commands can trigger auto-creation:
DELETE (including multitable DELETE, excluding DELETE HISTORY)
UPDATE (including multitable UPDATE)
REPLACE (including REPLACE .. SELECT)
INSERT .. ON DUPLICATE KEY UPDATE (including INSERT .. SELECT .. ODKU)
LOAD DATA .. REPLACE
:: Bug fixes ::
MDEV-23642 Locking timeout caused by auto-creation affects original DML
The reasons for this are:
- Do not disrupt main business process (the history is auxiliary service);
- Consequences are non-fatal (history is not lost, but comes into wrong
partition; fixed by partitioning rebuild);
- There is more freedom for application to fail in this case or not: it may
read warning info and find corresponding error number.
- While non-failing command is easy to handle by an application and fail it,
the opposite is hard to handle: there is no automatic actions to fix
failed command and retry, DBA intervention is required and until then
application is non-functioning.
MDEV-23639 Auto-create does not work under LOCK TABLES or inside triggers
Don't do tdc_remove_table() for OT_ADD_HISTORY_PARTITION because it is
not possible in locked tables mode.
LTM_LOCK_TABLES mode (and LTM_PRELOCKED_UNDER_LOCK_TABLES) works out
of the box as fast_alter_partition_table() can reopen tables via
locked_tables_list.
In LTM_PRELOCKED we reopen and relock table manually.
:: More fixes ::
* some_table_marked_for_reopen flag fix
some_table_marked_for_reopen affets only reopen of
m_locked_tables. I.e. Locked_tables_list::reopen_tables() reopens only
tables from m_locked_tables.
* Unused can_recover_from_failed_open() condition
Is recover_from_failed_open() can be really used after
open_and_process_routine()?
:: Reviewed by ::
Sergei Golubchik <serg@mariadb.org>
The added by MDEV-11675 assert is incorrected assuming
a replayed from binlog transaction can't contain invoke
a FD event's apply method.
In fact it can do that through BINLOG event.
The test case like
BEGIN;
INSERT INTO t1 VALUES(10);
BINLOG '
SOgWTg8BAAAAbgAAAHIAAAAAAAQANS42LjMtbTUtZGVidWctbG9nAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAABI6BZOEzgNAAgAEgAEBAQEEgAAVgAEGggAAAAICAgCAAAAAAVAYI8=';
is provided (by yet to merged atm) MDEV-27536 fixes.
The assert is removed.
This patch fixes two issues:
First, it fixes test failure due to GTID List events
having inconsistent ordering of domain ids. In
particular, this patch ensures that a GTID list log
event will have its GTIDs ordered by domain id
(ascending) followed by sequence number (ascending).
Second, it fixes an assert which could use an
unintialized variable.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
This commit implements two phase binloggable ALTER.
When a new
@@session.binlog_alter_two_phase = YES
ALTER query gets logged in two parts, the START ALTER and the COMMIT
or ROLLBACK ALTER. START Alter is written in binlog as soon as
necessary locks have been acquired for the table. The timing is
such that any concurrent DML:s that update the same table are either
committed, thus logged into binary log having done work on the old
version of the table, or will be queued for execution on its new
version.
The "COMPLETE" COMMIT or ROLLBACK ALTER are written at the very point
of a normal "single-piece" ALTER that is after the most of
the query work is done. When its result is positive COMMIT ALTER is
written, otherwise ROLLBACK ALTER is written with specific error
happened after START ALTER phase.
Replication of two-phase binloggable ALTER is
cross-version safe. Specifically the OLD slave merely does not
recognized the start alter part, still being able to process and
memorize its gtid.
Two phase logged ALTER is read from binlog by mysqlbinlog to produce
BINLOG 'string', where 'string' contains base64 encoded
Query_log_event containing either the start part of ALTER, or a
completion part. The Query details can be displayed with `-v` flag,
similarly to ROW format events. Notice, mysqlbinlog output containing
parts of two-phase binloggable ALTER is processable correctly only by
binlog_alter_two_phase server.
@@log_warnings > 2 can reveal details of binlogging and slave side
processing of the ALTER parts.
The current commit also carries fixes to the following list of
reported bugs:
MDEV-27511, MDEV-27471, MDEV-27349, MDEV-27628, MDEV-27528.
Thanks to all people involved into early discussion of the feature
including Kristian Nielsen, those who helped to design, implement and
test: Sergei Golubchik, Andrei Elkin who took the burden of the
implemenation completion, Sujatha Sivakumar, Brandon
Nesterenko, Alice Sherepa, Ramesh Sivaraman, Jan Lindstrom.
Problem:
========
When writing an XA based event to the binary log, an assert was
always referencing thd->lex->xa_opt. This variable, however, is
only set when using XA START, XA END, and XA COMMIT. When an
XA PREPARE statement is being processed, it is not guaranteed that
the xa_opt variable will be set (e.g. if existing within a stored
procedure). This caused valgrind to complain about accessing an
uninitialized variable.
Solution:
========
Before referencing xa_opt, ensure the context is valid such that
it is set.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
Rows_log_event::do_apply_event(): Correct the mistake that was made in
the merge 5f8561a6bc.
In Galera, the query cache will be invalidated near the end
of the function.
Dead code cleanup:
part_info->num_parts usage was wrong and working incorrectly in
mysql_drop_partitions() because num_parts is already updated in
prep_alter_part_table(). We don't have to update part_info->partitions
because part_info is destroyed at alter_partition_lock_handling().
Cleanups:
- DBUG_EVALUATE_IF() macro replaced by shorter form DBUG_IF();
- Typo in ER_KEY_COLUMN_DOES_NOT_EXITS.
Refactorings:
- Splitted write_log_replace_delete_frm() into write_log_delete_frm()
and write_log_replace_frm();
- partition_info via DDL_LOG_STATE;
- set_part_info_exec_log_entry() removed.
DBUG_EVALUATE removed
DBUG_EVALUTATE was only added for consistency together with
DBUG_EVALUATE_IF. It is not used anywhere in the code.
DBUG_SUICIDE() fix on release build
On release DBUG_SUICIDE() was statement. It was wrong as
DBUG_SUICIDE() is used in expression context.
https://jira.mariadb.org/browse/MDEV-26221
my_sys DYNAMIC_ARRAY and DYNAMIC_STRING inconsistancy
The DYNAMIC_STRING uses size_t for sizes, but DYNAMIC_ARRAY used uint.
This patch adjusts DYNAMIC_ARRAY to use size_t like DYNAMIC_STRING.
As the MY_DIR member number_of_files is copied from a DYNAMIC_ARRAY,
this is changed to be size_t.
As MY_TMPDIR members 'cur' and 'max' are copied from a DYNAMIC_ARRAY,
these are also changed to be size_t.
The lists of plugins and stored procedures use DYNAMIC_ARRAY,
but their APIs assume a size of 'uint'; these are unchanged.
This could only cause an issue if we got a crash at the very end of a
DDL log execution of an ALTER TABLE. The possible effect would be that
we would get two ALTER TABLE events in the binary log.
in about a hundred of users of MY_BITMAP, only two were using its
built-in mutex, and only one of those two was actually needing it.
Remove the mutex from MY_BITMAP, remove all associated conditions
and checks in bitmap functions. Use an external LOCK_temp_pool
mutex and temp_pool_set_next/temp_pool_clear_bit acccessors.
Remove bitmap_init/bitmap_free, always use my_* versions.
Problem:
=======
When the semisync master is crashed and restarted as slave it could
recover transactions that former slaves may never have seen.
A known method existed to clear out all prepared transactions
with --tc-heuristic-recover=rollback does not care to adjust
binlog accordingly.
Fix:
===
The binlog-based recovery is made to concern of the slave semisync role of
post-crash restarted server.
No changes in behavior is done to the "normal" binloggging server
and the semisync master.
When the restarted server is configured with
--rpl-semi-sync-slave-enabled=1
the refined recovery attempts to roll back prepared transactions
and truncate binlog accordingly.
In case of a partially committed (that is committed at least
in one of the engine participants) such transaction gets committed.
It's guaranteed no (partially as well) committed transactions
exist beyond the truncate position.
In case there exists a non-transactional replication event
(being in a way a committed transaction) past the
computed truncate position the recovery ends with an error.
As after master crash and failover to slave, the demoted-to-slave
ex-master must be ready to face and accept its own (generated by)
events, without generally necessary --replicate-same-server-id.
So the acceptance conditions are relaxed for the semisync slave
to accept own events without that option.
While gtid_strict_mode ON ensures no duplicate transaction can be
(re-)executed the master_use_gtid=none slave has to be
configured with --replicate-same-server-id.
*NOTE* for reviewers.
This patch does not handle the user XA which is done
in next git commit.
- Major rewrite of ddl_log.cc and ddl_log.h
- ddl_log.cc described in the beginning how the recovery works.
- ddl_log.log has unique signature and is dynamic. It's easy to
add more information to the header and other ddl blocks while still
being able to execute old ddl entries.
- IO_SIZE for ddl blocks is now dynamic. Can be changed without affecting
recovery of old logs.
- Code is more modular and is now usable outside of partition handling.
- Renamed log file to dll_recovery.log and added option --log-ddl-recovery
to allow one to specify the path & filename.
- Added ddl_log_entry_phase[], number of phases for each DDL action,
which allowed me to greatly simply set_global_from_ddl_log_entry()
- Changed how strings are stored in log entries, which allows us to
store much more information in a log entry.
- ddl log is now always created at start and deleted on normal shutdown.
This simplices things notable.
- Added probes debug_crash_here() and debug_simulate_error() to simply
crash testing and allow crash after a given number of times a probe
is executed. See comments in debug_sync.cc and rename_table.test for
how this can be used.
- Reverting failed table and view renames is done trough the ddl log.
This ensures that the ddl log is tested also outside of recovery.
- Added helper function 'handler::needs_lower_case_filenames()'
- Extend binary log with Q_XID events. ddl log handling is using this
to check if a ddl log entry was logged to the binary log (if yes,
it will be deleted from the log during ddl_log_close_binlogged_events()
- If a DDL entry fails 3 time, disable it. This is to ensure that if
we have a crash in ddl recovery code the server will not get stuck
in a forever crash-restart-crash loop.
mysqltest.cc changes:
- --die will now replace $variables with their values
- $error will contain the error of the last failed statement
storage engine changes:
- maria_rename() was changed to be more robust against crashes during
rename.
This change is to get rid of randomly failing tests, especially those
that reads random position of the binary log. From looking at the logs
it's clear that some failures is because of a read char (with value >= 128)
is converted to a big long value. Using uchar everywhere makes this much
less likely to happen.
Another benefit is that a lot of cast of char to uchar could be removed.
Other things:
- Removed some extra space before '=' and '+=' in assignments
- Fixed indentations and lines > 80 characters
- Replace '16' with 'element_size' (from class definition) in
Gtid_list_log_event()
This change removed 68 explict strlen() calls from the code.
The following renames was done to ensure we don't use the old names
when merging code from earlier releases, as using the new variables
for print function could result in crashes:
- charset->csname renamed to charset->cs_name
- charset->name renamed to charset->coll_name
Almost everything where mechanical changes except:
- Changed to use the new Protocol::store(LEX_CSTRING..) when possible
- Changed to use field->store(LEX_CSTRING*, CHARSET_INFO*) when possible
- Changed to use String->append(LEX_CSTRING&) when possible
Other things:
- There where compiler issues with ensuring that all character set names
points to the same string: gcc doesn't allow one to use integer constants
when defining global structures (constant char * pointers works fine).
To get around this, I declared defines for each character set name
length.
Changes:
- To detect automatic strlen() I removed the methods in String that
uses 'const char *' without a length:
- String::append(const char*)
- Binary_string(const char *str)
- String(const char *str, CHARSET_INFO *cs)
- append_for_single_quote(const char *)
All usage of append(const char*) is changed to either use
String::append(char), String::append(const char*, size_t length) or
String::append(LEX_CSTRING)
- Added STRING_WITH_LEN() around constant string arguments to
String::append()
- Added overflow argument to escape_string_for_mysql() and
escape_quotes_for_mysql() instead of returning (size_t) -1 on overflow.
This was needed as most usage of the above functions never tested the
result for -1 and would have given wrong results or crashes in case
of overflows.
- Added Item_func_or_sum::func_name_cstring(), which returns LEX_CSTRING.
Changed all Item_func::func_name()'s to func_name_cstring()'s.
The old Item_func_or_sum::func_name() is now an inline function that
returns func_name_cstring().str.
- Changed Item::mode_name() and Item::func_name_ext() to return
LEX_CSTRING.
- Changed for some functions the name argument from const char * to
to const LEX_CSTRING &:
- Item::Item_func_fix_attributes()
- Item::check_type_...()
- Type_std_attributes::agg_item_collations()
- Type_std_attributes::agg_item_set_converter()
- Type_std_attributes::agg_arg_charsets...()
- Type_handler_hybrid_field_type::aggregate_for_result()
- Type_handler_geometry::check_type_geom_or_binary()
- Type_handler::Item_func_or_sum_illegal_param()
- Predicant_to_list_comparator::add_value_skip_null()
- Predicant_to_list_comparator::add_value()
- cmp_item_row::prepare_comparators()
- cmp_item_row::aggregate_row_elements_for_comparison()
- Cursor_ref::print_func()
- Removes String_space() as it was only used in one cases and that
could be simplified to not use String_space(), thanks to the fixed
my_vsnprintf().
- Added some const LEX_CSTRING's for common strings:
- NULL_clex_str, DATA_clex_str, INDEX_clex_str.
- Changed primary_key_name to a LEX_CSTRING
- Renamed String::set_quick() to String::set_buffer_if_not_allocated() to
clarify what the function really does.
- Rename of protocol function:
bool store(const char *from, CHARSET_INFO *cs) to
bool store_string_or_null(const char *from, CHARSET_INFO *cs).
This was done to both clarify the difference between this 'store' function
and also to make it easier to find unoptimal usage of store() calls.
- Added Protocol::store(const LEX_CSTRING*, CHARSET_INFO*)
- Changed some 'const char*' arrays to instead be of type LEX_CSTRING.
- class Item_func_units now used LEX_CSTRING for name.
Other things:
- Fixed a bug in mysql.cc:construct_prompt() where a wrong escape character
in the prompt would cause some part of the prompt to be duplicated.
- Fixed a lot of instances where the length of the argument to
append is known or easily obtain but was not used.
- Removed some not needed 'virtual' definition for functions that was
inherited from the parent. I added override to these.
- Fixed Ordered_key::print() to preallocate needed buffer. Old code could
case memory overruns.
- Simplified some loops when adding char * to a String with delimiters.
A mtr failure in rpl.rpl_mariadb_slave_capability mismatch:
-slave-relay-bin.000005 # Query # # BEGIN
+slave-relay-bin.000005 # Query # # set foreign_key_checks=1, check_constraint_checks=1; BEGIN
was fixed by {{80544a5878ac}}, and without any check for {{flags_inited}}
which is a pattern in the sources.
This ticket therefore merely makes sure through an assert that a
relation between the two remain in {{Query_log_event::pack_info}}.
The COM_MULTI did not take off. No connector is using it.
Remove related code from server, and client.
If anything it is a step simplification of already-bloated
dispatch_command(), and related code.
When converting a table (test.s3_table) from S3 to another engine, the
following will be logged to the binary log:
DROP TABLE IF EXISTS test.t1;
CREATE OR REPLACE TABLE test.t1 (...) ENGINE=new_engine
INSERT rows to test.t1 in binary-row-log-format
The bug is that the above statements are logged one by one to the binary
log. This means that a fast slave, configured to use the same S3 storage
as the master, would be able to execute the DROP and CREATE from the
binary log before the master has finished the ALTER TABLE.
In this case the slave would ignore the DROP (as it's on a S3 table) but
it will stop on CREATE of the local tale, as the table is still exists in
S3. The REPLACE part will be ignored by the slave as it can't touch the
S3 table.
The fix is to ensure that all the above statements is written to binary
log AFTER the table has been deleted from S3.
- Rewrote bool Query_compressed_log_event::write() to make it more readable
(no logic changes).
- Changed DBUG_PRINT of 'is_error:' to 'is_error():' to make it easier to
find error: in traces.
- Ensure that 'db' is never null in Query_log_event (Simplified code).
