ha_partition::set_auto_increment_if_higher expects
part_share->auto_inc_initialized is true or can_use_for_auto_inc_init()
is false (but as the comment of this method says, it returns false
only if we use Spider engine with DROP TABLE or ALTER TABLE query).
However, part_share->auto_inc_initialized becomes true only after all
partitions are opened (since 6dce6aeceb).
Therefore, I added a conditional expression in order to read all
partitions when we execute REPLACE on a table that has an
AUTO_INCREMENT column.
Reviewed by: Nayuta Yanagisawa
Reviewed by: Alexey Botchkov
:: Syntax change ::
Keyword AUTO enables history partition auto-creation.
Examples:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 MONTH
STARTS '2021-01-01 00:00:00' AUTO PARTITIONS 12;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME LIMIT 1000 AUTO;
Or with explicit partitions:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO
(PARTITION p0 HISTORY, PARTITION pn CURRENT);
To disable or enable auto-creation one can use ALTER TABLE by adding
or removing AUTO from partitioning specification:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
# Disables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR;
# Enables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
If the rest of partitioning specification is identical to CREATE TABLE
no repartitioning will be done (for details see MDEV-27328).
:: Description ::
Before executing history-generating DML command (see the list of commands below)
add N history partitions, so that N would be sufficient for potentially
generated history. N > 1 may be required when history partitions are switched
by INTERVAL and current_timestamp is N times further than the interval
boundary of the last history partition.
If the last history partition equals or exceeds LIMIT records then new history
partition is created and selected as the working partition. According to
MDEV-28411 partitions cannot be switched (or created) while the command is
running. Thus LIMIT does not carry strict limitation and the history partition
size must be planned as LIMIT value plus average number of history one DML
command can generate.
Auto-creation is implemented by synchronous fast_alter_partition_table() call
from the thread of the executed DML command before the command itself is run
(by the fallback and retry mechanism similar to Discovery feature,
see Open_table_context).
The name for newly added partitions are generated like default partition names
with extension of MDEV-22155 (which avoids name clashes by extending assignment
counter to next free-enough gap).
These DML commands can trigger auto-creation:
DELETE (including multitable DELETE, excluding DELETE HISTORY)
UPDATE (including multitable UPDATE)
REPLACE (including REPLACE .. SELECT)
INSERT .. ON DUPLICATE KEY UPDATE (including INSERT .. SELECT .. ODKU)
LOAD DATA .. REPLACE
:: Bug fixes ::
MDEV-23642 Locking timeout caused by auto-creation affects original DML
The reasons for this are:
- Do not disrupt main business process (the history is auxiliary service);
- Consequences are non-fatal (history is not lost, but comes into wrong
partition; fixed by partitioning rebuild);
- There is more freedom for application to fail in this case or not: it may
read warning info and find corresponding error number.
- While non-failing command is easy to handle by an application and fail it,
the opposite is hard to handle: there is no automatic actions to fix
failed command and retry, DBA intervention is required and until then
application is non-functioning.
MDEV-23639 Auto-create does not work under LOCK TABLES or inside triggers
Don't do tdc_remove_table() for OT_ADD_HISTORY_PARTITION because it is
not possible in locked tables mode.
LTM_LOCK_TABLES mode (and LTM_PRELOCKED_UNDER_LOCK_TABLES) works out
of the box as fast_alter_partition_table() can reopen tables via
locked_tables_list.
In LTM_PRELOCKED we reopen and relock table manually.
:: More fixes ::
* some_table_marked_for_reopen flag fix
some_table_marked_for_reopen affets only reopen of
m_locked_tables. I.e. Locked_tables_list::reopen_tables() reopens only
tables from m_locked_tables.
* Unused can_recover_from_failed_open() condition
Is recover_from_failed_open() can be really used after
open_and_process_routine()?
:: Reviewed by ::
Sergei Golubchik <serg@mariadb.org>
Moved LIMIT warning from vers_set_hist_part() to new call
vers_check_limit() at table unlock phase. At that point
read_partitions bitmap is already pruned by DML code (see
prune_partitions(), find_used_partitions()) so we have to set
corresponding bits for working history partition.
Also we don't do my_error(ME_WARNING|ME_ERROR_LOG), because at that
point it doesn't update warnings number, so command reports 0 warnings
(but warning list is still updated). Instead we do
push_warning_printf() and sql_print_warning() separately.
Under LOCK TABLES external_lock(F_UNLCK) is not executed. There is
start_stmt(), but no corresponding "stop_stmt()". So for that mode we
call vers_check_limit() directly from close_thread_tables().
Test result has been changed according to new LIMIT and warning
printing algorithm. For convenience all LIMIT warnings are marked with
"You see warning above ^".
TODO MDEV-20345 fixed. Now vers_history_generating() contains
fine-grained list of DML-commands that can generate history (and TODO
mechanism worked well).
Like in MDEV-27217 vers_set_hist_part() for LIMIT depends on all
partitions selected in read_partitions. That bugfix just disabled
partition selection for DELETE with this check:
if (table->pos_in_table_list &&
table->pos_in_table_list->partition_names)
{
return HA_ERR_PARTITION_LIST;
}
ALTER TABLE TRUNCATE PARTITION is a different story. First, it doesn't
update pos_in_table_list->partition_names, but
thd->lex->alter_info.partition_names. But we cannot depend on that
since alter_info will be stale for DML. Second, we should not disable
TRUNCATE PARTITION for that to be consistent with TRUNCATE TABLE
behavior.
Now we don't do vers_set_hist_part() for ALTER TABLE as this command
is not DML, so it does not produce history.
The partitioning engine does not support the table-level DATA/INDEX
DIRECTORY specification.
If one create a non-partitioned table with the DATA/INDEX DIRECTORY
option and then performs ALTER TABLE ... PARTITION BY on it, the
DATA/INDEX DIRECTORY specification of the old schema is ignored.
The behavior might be a bit surprising for users because the value
of a usual table option applies to all the partitions. Thus, we raise
a warning on such ALTER TABLE ... PARTITION BY.
extra2_read_len resolved by keeping the implementation
in sql/table.cc by exposed it for use by ha_partition.cc
Remove identical implementation in unireg.h
(ref: bfed2c7d57)
whenever possible, partitioning should use the full
partition plugin name, not the one byte legacy code.
Normally, ha_partition can get the engine plugin from
table_share->default_part_plugin.
But in some cases, e.g. in DROP TABLE, the table isn't
opened, table_share is NULL, and ha_partition has to parse
the frm, much like dd_frm_type() does.
temporary_tables.cc, sql_table.cc:
When dropping a table, it must be deleted in the engine
first, then frm file. Because frm can be the only true
source of metadata that the engine might need for DROP.
table.cc:
when opening a partitioned table, if the engine for
partitions is not found, do not fallback to MyISAM.
Make it possible to specify engine-defined attributes on partitions
as well as tables.
If an engine-defined attribute is only specified at the table level,
it applies to all the partitions in the table.
This is a backward-compatible behavior.
If the same attribute is specified both at the table level and the
partition level, the per-partition one takes precedence.
So, we can consider per-table attributes as default values.
One cannot specify engine-defined attributes on subpartitions.
Implementation details:
* We store per-partition attributes in the partition_element class
because we already have the part_comment field, which is for
per-partition comments.
* In the case of ALTER TABLE statements, the partition_elements in
table->part_info is set up by mysql_unpack_partition().
So, we parse per-partition attributes after the call of the function.
ha_partition::start_stmt() continued processing in error state. Though
no known bug cases yet it seems break was made incorrect by
f93a2a3b3b (2016) while originally break was ok since cd483c5520
(2005).
LIMIT history switching requires the number of history partitions to
be marked for read: from first to last non-empty plus one empty. The
least we can do is to fail with error message if the needed partition
was not marked for read. As this is handler interface we require new
handler error code to display user-friendly error message.
Switching by INTERVAL works out-of-the-box with
ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET error.
Replaced HA_ADMIN_NOT_IMPLEMENTED error code by HA_ADMIN_OK. Now CHECK
TABLE does not fail by unsupported check_misplaced_rows(). Admin
message is not needed as well.
Test case is the same as for MDEV-21011 (a7cf0db3d8), the result have
been changed.
in about a hundred of users of MY_BITMAP, only two were using its
built-in mutex, and only one of those two was actually needing it.
Remove the mutex from MY_BITMAP, remove all associated conditions
and checks in bitmap functions. Use an external LOCK_temp_pool
mutex and temp_pool_set_next/temp_pool_clear_bit acccessors.
Remove bitmap_init/bitmap_free, always use my_* versions.
