Problem: Many test cases don't clean up after themselves (fail
to drop tables or fail to reset variables). This implies that:
(1) check-testcase in the new mtr that currently lives in
5.1-rpl failed. (2) it may cause unexpected results in
subsequent tests.
Fix: make all tests clean up.
Also: cleaned away unnecessary output in rpl_packet.result
Also: fixed bug where rpl_log called RESET MASTER with a running
slave. This is not supposed to work.
Also: removed unnecessary code from rpl_stm_EE_err2 and made it
verify that an error occurred.
Also: removed unnecessary code from rpl_ndb_ctype_ucs2_def.
In certain situations, a scan of the table will return the error
code HA_ERR_RECORD_DELETED, and this error code is not
correctly caught in the Rows_log_event::find_row() function, which
causes an error to be returned for this case.
This patch fixes the problem by adding code to either ignore the
record and continuing with the next one, the the event of a table
scan, or change the error code to HA_ERR_KEY_NOT_FOUND, in the event
that a key lookup is attempted.
The code to get read the value of a system variable was extracting its value
on PREPARE stage and was substituting the value (as a constant) into the parse tree.
Note that this must be a reversible transformation, i.e. it must be reversed before
each re-execution.
Unfortunately this cannot be reliably done using the current code, because there are
other non-reversible source tree transformations that can interfere with this
reversible transformation.
Fixed by not resolving the value at PREPARE, but at EXECUTE (as the rest of the
functions operate). Added a cache of the value (so that it's constant throughout
the execution of the query). Note that the cache also caches NULL values.
Updated an obsolete related test suite (variables-big) and the code to test the
result type of system variables (as per bug 74).
The Blackhole engine did not support row-based replication
since the delete_row(), update_row(), and the index and range
searching functions were not implemented.
This patch adds row-based replication support for the
Blackhole engine by implementing the two functions mentioned
above, and making the engine pretend that it has found the
correct row to delete or update when executed from the slave
SQL thread by implementing index and range searching functions.
It is necessary to only pretend this for the SQL thread, since
a SELECT executed on the Blackhole engine will otherwise never
return EOF, causing a livelock.
The size of the Innodb_buffer_pool_pages differs by one byte on row versus statement
log, so neuter the last position of the stringified decimal representation. Innobase
says the size isn't very important in any case.
Also, split out the "mixed" format to its own file, as mtr seems to dislike having only
stm and row but not mix.
The assertion indicates that some data was left in the transaction
cache when the server was shut down, which means that a previous
statement did not commit or rollback correctly.
What happened was that a bug in the rollback of a transactional
table caused the transaction cache to be emptied, but not reset.
The error can be triggered by having a failing UPDATE or INSERT,
on a transactional table, causing an implicit rollback.
Fixed by always flushing the pending event to reset the state
properly.
tables open
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
manually resolved conflicts:
Text conflict in client/mysqltest.c
Contents conflict in mysql-test/include/have_bug25714.inc
Text conflict in mysql-test/include/have_ndbapi_examples.inc
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/suite/parts/inc/partition_check_drop.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check1.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check2.inc
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_basic_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_symlink_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_engine_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_syntax_myisam.result
Text conflict in mysql-test/suite/rpl_ndb/t/disabled.def
Text conflict in mysql-test/t/disabled.def
Problem: binlog_stm_binlog runs INSERT DELAYED queries, and
then prints the contents of the binlog. Before checking the
contents of the binlog, the test waits until the rows have
appeared in the table. However, this is not enough, since
INSERT DELAYED does not write rows to the binlog at the same
time as it writes them to the table. So there is a race.
Fix: Add a FLUSH TABLES before SHOW BINLOG EVENTS. That
waits until the insert_delayed thread is done.
BUG#37884: rpl_row_basic_2myisam and rpl_row_basic_3innodb fail sporadically in pushbuild
These have been fixed in 5.1-rpl. Re-applying fix for BUG#37884
in 5.1-bugteam, and disabling rpl_flushlog_loop for BUG#37733 in
5.1-bugteam.
Problem 1: tests often fail in pushbuild with a timeout when waiting
for the slave to start/stop/receive error.
Fix 1: Updated the wait_for_slave_* macros in the following way:
- The timeout is increased by a factor ten
- Refactored the macros so that wait_for_slave_param does the work for
the other macros.
Problem 2: Tests are often incorrectly written, lacking a
source include/wait_for_slave_to_[start|stop].inc.
Fix 2: Improved the chance to get it right by adding
include/start_slave.inc and include/stop_slave.inc, and updated tests
to use these.
Problem 3: The the built-in test language command
wait_for_slave_to_stop is a misnomer (does not wait for the slave io
thread) and does not give as much debug info in case of failure as
the otherwise equivalent macro
source include/wait_for_slave_sql_to_stop.inc
Fix 3: Replaced all calls to the built-in command by a call to the
macro.
Problem 4: Some, but not all, of the wait_for_slave_* macros had an
implicit connection slave. This made some tests confusing to read,
and made it more difficult to use the macro in circular replication
scenarios, where the connection named master needs to wait.
Fix 4: Removed the implicit connection slave from all
wait_for_slave_* macros, and updated tests to use an explicit
connection slave where necessary.
Problem 5: The macros wait_slave_status.inc and wait_show_pattern.inc
were unused. Moreover, using them is difficult and error-prone.
Fix 5: remove these macros.
Problem 6: log_bin_trust_function_creators_basic failed when running
tests because it assumed @@global.log_bin_trust_function_creators=1,
and some tests modified this variable without resetting it to its
original value.
Fix 6: All tests that use this variable have been updated so that
they reset the value at end of test.
In order to handle CHAR() fields, 8 bits were reserved for
the size of the CHAR field. However, instead of denoting the
number of characters in the field, field_length was used which
denotes the number of bytes in the field.
Since UTF-8 fields can have three bytes per character (and
has been extended to have four bytes per character in 6.0),
an extra two bits have been encoded in the field metadata
work for fields of type Field_string (i.e., CHAR fields).
Since the metadata word is filled, the extra bits have been
encoded in the upper 4 bits of the real type (the most
significant byte of the metadata word) by computing the
bitwise xor of the extra two bits. Since the upper 4 bits
of the real type always is 1111 for Field_string, this
means that for fields of length <256, the encoding is
identical to the encoding used in pre-5.1.26 servers, but
for lengths of 256 or more, an unrecognized type is formed,
causing an old slave (that does not handle lengths of 256
or more) to stop.
Problem: If INSERT is immediately followed by SELECT in another thread,
the newly inserted rows may not be returned by the SELECT statement, if
ENGINE=myisam and @@concurrent_insert=1. This caused sporadic errors in
rpl_insert_id.
Fix: The test now uses ENGINE=$engine_type when creating tables (so that
innodb is used). It also turns off @@concurrent_insert around the critical
place, so that it works if someone in the future writes a test that sets
$engine_type=myisam before sourcing extra/rpl_tests/rpl_insert_id.test.
It also adds ORDER BY to all SELECTs so that the result is deterministic.
