The error message due to lack of the default value for an extra field
was not as informative as it should be.
Fixed with improving the scheme of gathering, propagating and reporting
errors in applying rows events.
The scheme is in the following.
Any kind of error of processing of a row event incidents are to be
registered with my_error().
In the end Rows_log_event::do_apply_event() invokes rli->report() with the
message to display consisting of all the errors.
This mimics `show warnings' displaying.
A simple test checks three errors in processing an event.
Two hunks - a user level error and pushing it into the list -
have been devoted to already fixed Bug@31702.
Some open issues relating to this artifact listed on BUG@21842 page and
on WL@3679.
Todo: to synchronize the statement in the tests comments on Update and Delete
events may not stop when an extra field does not have a default with wl@3228 spec.
Main problem: mysql 5.1 cannot read binlogs from 4.1.
Subproblem 1: There is a mistake in sql_ex_info::init. The read_str()
function updates its first argument to point to the next character to
read. However, it is applied only to a copy of the buffer pointer, so the
real buffer pointer is not updated.
Fix 1: do not take a copy of the buffer pointer. The copy was needed
because sql_ex_info::init does not use the const attribute on some of its
arguments. So we add the const attribute, too.
Subproblem 2: The first BINLOG statement is asserted to be a
FORMAT_DESCRIPTION_LOG_EVENT, but 4.1 binlogs begin with START_EVENT_V3.
Fix 2: allow START_EVENT_V3 too.
Problem: When slave reads format_description_log_event, it checks if the
master is a version that uses an old binlog format. See also BUG#27779.
Not all possible server_versions were listed.
Fix: Check for all server_versions which use the old binlog_format.
Here is the scenario that causes the failure.(by Mats)
1. The to-be corrupt log event (let's call it X), is split into two
packets B and C on the network level (net_write_buff()). The parts
are X = (x',x''). The part x' ends up in packet B and part x''
ends up in packet C. Prior to the corrupt event X, the event Y has
been written successfully, but has been split into two packets as
well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
packet sequence number, the slave receives the packet, but fails
to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
sending the binary log by exiting mysql_binlog_send(). However, it
leaves the buffer intact, still holding y'' (but not x', since the
write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
disconnection of the client thread, which involves sending an
error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
old contents of the packet is used so that the new packet is
D = (y'',e). Note that this will use a new packet sequence number,
since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
this with x' (which it already received), and writes the event
(x',y'') it to the relay log since it hasn't noticed anything is
amiss.
7. It then tries to read more bytes, which is either e (if the length
given for X just happened to match the length given for Y, or just
plain garbage because the slave is out of sync with what is
actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
which is very likely to be just nonsense.
The problem can be fixed by not resetting net->error after the call of
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.
The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.
After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.
This patch is based on the patch for BUG#29749, which is not pushed
Problem: Replication fails when master is mysql-5.1-wl2325-5.0-drop6 and
slave is mysql-5.1-new-rpl. The reason is that, in
mysql-5.1-wl2325-5.0-drop6, the event type id's were different than in
mysql-5.1-new-rpl.
Fix (in mysql-5.1-new-rpl):
(1) detect that the server that generated the events uses the old
format, by checking the server version of the format_description_log_event
This patch recognizes mysql-5.1-wl2325-5.0-drop6p13-alpha,
mysql-5.1-wl2325-5.0-drop6, mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
(2) if the generating server is old, map old event types to new event
types using a permutation array.
I've also added a test case which reads binlogs for four different
versions.
read_buffer_size set on master
BUG#33413 show binlog events fails if binlog has event size of close
to max_allowed_packet
The size of Append_block replication event was determined solely by
read_buffer_size whereas the rest of replication code deals with
max_allowed_packet.
When the former parameter was set to larger than the latter there were
two artifacts: the master could not read events from binlog;
show master events did not show.
Fixed with
- fragmenting the used io-cached buffer into pieces each size of less
than max_allowed_packet (bug#30435)
- incrementing show-binlog-events handling thread's max_allowed_packet
with the max estimated for the replication header size
Now, every transaction (including autocommit transactions) start with
a BEGIN and end with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
ignores future_group_master_log_p
There was a redundant assignement. However, that's the only artifact.
Wrt to future_group_master_log_position, there is no issue.
The counter is supposed to be set at Log_event::exec_event().
It's used only by Innodb for recovery purposes.
When set the server-id dynamically, the server_id member of current thread is not updated.
Update the server_id member of current thread after updated the global variable value.
Complementary patch since LOAD DATA INFILE was not covered in
the previous patch.
This patch adds a check so that the slave skip counter is not
decreased to zero if seeing a BEGIN_LOAD_QUERY_EVENT,
APPEND_BLOCK_EVENT, or CREATE_FILE_EVENT since these cannot
end a group. The group is terminated by an EXECUTE_LOAD_QUERY_
EVENT or DELETE_FILE_EVENT.
fine
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD). Currently, mysqlbinlog
cannot print the FD.
As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.
This patch does several things:
- Format_description_log_event (FD) now print themselves in base64
format.
- mysqlbinlog is now able to print FD events. It has three modes:
--base64-output=auto Print row events in base64 output, and print
FD event. The FD event is printed even if
it is outside the range specified with
--start-position, because it would not be
safe to read row events otherwise. This is
the default.
--base64-output=always Like --base64-output=auto, but also print
base64 output for query events. This is
like the old --base64-output flag, which
is also a shorthand for
--base64-output=always
--base64-output=never Never print base64 output, generate error if
row events occur in binlog. This is
useful to suppress the FD event in binlogs
known not to contain row events (e.g.,
because BINLOG statement is unsafe,
requires root privileges, is not SQL, etc)
- the BINLOG statement now handles FD events correctly, by setting
the thread's rli's relay log's description_event_for_exec to the
loaded event.
In fact, executing a BINLOG statement is almost the same as reading
an event from a relay log. Before my patch, the code for this was
separated (exec_relay_log_event in slave.cc executes events from
the relay log, mysql_client_binlog_statement in sql_binlog.cc
executes BINLOG statements). I needed to augment
mysql_client_binlog_statement to do parts of what
exec_relay_log_event does. Hence, I did a small refactoring and
moved parts of exec_relay_log_event to a new function, which I
named apply_event_and_update_pos. apply_event_and_update_pos is
called both from exec_relay_log_event and from
mysql_client_binlog_statement.
- When a non-FD event is executed in a BINLOG statement, without
previously executing a FD event in a BINLOG statement, it generates
an error, because that's unsafe. I took a new error code for that:
ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.
In order to get a decent error message containing the name of the
event, I added the class method char*
Log_event::get_type_str(Log_event_type type), which returns a
string name for the given Log_event_type. This is just like the
existing char* Log_event::get_type_str(), except it is a class
method that takes the log event type as parameter.
I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
so that names of old rows event are properly printed.
- When reading an event, I added a check that the event type is known
by the current Format_description_log_event. Without this, it may
crash on bad input (and I was struck by this several times).
- I patched the following test cases, which all contain BINLOG
statements for row events which must be preceded by BINLOG
statements for FD events:
- rpl_bug31076
While I was here, I fixed some small things in log_event.cc:
- replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places
- replaced return by DBUG_VOID_RETURN in one place
- The name of the logfile can be '-' to indicate stdin. Before my
patch, the code just checked if the first character is '-'; now it
does a full strcmp(). Probably, all arguments that begin with a -
are already handled somewhere else as flags, but I still think it
is better that the code reflects what it is supposed to do, with as
little dependencies as possible on other parts of the code. If we
one day implement that all command line arguments after -- are
files (as most unix tools do), then we need this.
I also fixed the following in slave.cc:
- next_event() was declared twice, and queue_event was not static but
should be static (not used outside the file).
Now, every transaction (including autocommit transactions) starts with
a BEGIN and ends with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
without PK
Bug#31609 Not all RBR slave errors reported as errors
bug#32468 delete rows event on a table with foreign key constraint fails
The first two bugs comprise idempotency issues.
First, there was no error code reported under conditions of the bug
description although the slave sql thread halted.
Second, executions were different with and without presence of prim key in
the table.
Third, there was no way to instruct the slave whether to ignore an error
and skip to the following event or to halt.
Fourth, there are handler errors which might happen due to idempotent
applying of binlog but those were not listed among the "idempotent" error
list.
All the named issues are addressed.
Wrt to the 3rd, there is the new global system variable, changeble at run
time, which controls the slave sql thread behaviour.
The new variable allows further extensions to mimic the sql_mode
session/global variable.
To address the 4th, the new bug#32468 had to be fixed as it was staying
in the way.
In the patch for BUG#21842, the code for handling old rows events were
refactored. There were a bug in the refactored code (possibly introduced
after the patch for BUG#21842) that caused caused the refactored old events
to read a columns bitmap after image even though there is no such bitmap
for old events. As a result, the reading got out of sync, and started reading
invalid data.
This patch removes all trace of the after image column bitmap from the refactored
old events and removes functions that are no longer needed because they are empty.
When executing drop view statement on the master, the statement is not written into bin-log if any error occurs, this could cause master slave inconsistence if any view has been dropped.
If some error occured and no view has been dropped, don't bin-log the statement, if at least one view has been dropped the query is bin-logged possible with an error.
