Problem was incorrect condition when node should have
resumed and resync at backup_end. Simplified condition
to fix the problem and added missing test case for
this wsrep_mode = BF_ABORT_MARIABACKUP.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
- InnoDB aborts when table is dropping the column. This is
caused by 5f09b53bdb (MDEV-31086).
While iterating the altered table fields, we fail to consider
the dropped columns.
There was two related problems:
(1) Galera node that is defined as a slave to async MariaDB
master at restart might do SST (state stransfer) and
part of that it will copy mysql.gtid_slave_pos table.
Problem is that updates on that table are not replicated
on a cluster. Therefore, table from donor that is not
slave is copied and joiner looses gtid position it was
and start executing events from wrong position of the binlog.
This incorrect position could break replication and
causes node to be dropped and requiring user action.
(2) Slave sql thread might start executing events before
galera is ready (wsrep_ready=ON) and that could also
cause node to be dropped from the cluster.
In this fix we enable replication of mysql.gtid_slave_pos
table on a cluster. In this way all nodes in a cluster
will know gtid slave position and even after SST joiner
knows correct gtid position to start.
Furthermore, we wait galera to be ready before slave
sql thread executes any events to prevent too early
execution.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
when validating vcol's (default, check, etc) in ALTER TABLE
vcol_info->flags are modified in place. This means that if ALTER TABLE
fails for any reason we need to restore them to their original values.
(mroonga was freeing the memory on ::reset() but not on ::close())
make TRANSACTIONAL table option behave similar to other engine-defined
table options. If the engine doesn't suport it:
* if specified expicitly in CREATE or ALTER - it's ER_UNKNOWN_OPTION
* an error or a warning depending on sql_mode IGNORE_BAD_TABLE_OPTIONS
* in ALTER TABLE from the engine that suppors it to the engine that
doesn't - silently preserved (no warning)
* it is commented out in SHOW CREATE unless IGNORE_BAD_TABLE_OPTIONS
* invoke check_expression() for all vcol_info's in
mysql_prepare_create_table() to check for FK CASCADE
* also check for SET NULL and SET DEFAULT
* to check against existing FKs when a vcol is added in ALTER TABLE,
old FKs must be added to the new_key_list just like other indexes are
* check columns recursively, if vcol1 references vcol2,
flags of vcol2 must be taken into account
* remove check_table_name_processor(), put that logic under
check_vcol_func_processor() to avoid walking the tree twice
AES_ENCRYPT(str, key, [, iv [, mode ]])
AES_DECRYPT(str, key, [, iv [, mode ]])
mode is aes-{128,192,256}-{ecb,cbc,ctr} e.g. "aes-128-cbc".
and a @@block_encryption_mode variable for the default value of mode
change in behavior: AES_ENCRYPT(str, key) can no longer
be used in persistent virtual columns (and alike)
- Introduce the option :autoshrink attribute to be
added to innodb_data_file_path variable to allow
the shrinking of system tablespace during startup process.
Steps for shrinking the system tablespace:
1) Find the last used extent in system tablespace
by iterating through the BITMAP in extent descriptor pages
2) If the last used extent is lesser than user specified size
then set desired target size to user specified size.
3) Store the page contents of "to be modified" extent
descriptor pages, latches the "to be modified"
extent descriptor pages and check for buffer pool
memory availability
4) Make checkpoint to flush all pages in buffer pool, so
that pages in flush list doesn't have to use doublewrite
buffer and disable doublewrite buffer during shrinking process
5) Update the FSP_SIZE and FSP_FREE_LIMIT in header page
6) Remove the "to be truncated" pages from FSP_FREE and
FSP_FREE_FRAG list
7) Reset the bitmap in the last descriptor pages for the
"to be truncated" pages.
8) In case of multiple files, calculate the truncated last
file size and do the truncation in last file
9) Check whether mini-transaction log size doesn't exceed
the minimum value of innodb_log_buffer_size which is 2MB.
In that case, replace the modified buffer pool pages with
the page old content.
11) Commit the mini-transaction for shrinking the tablespace
and enable/disable the doublewrite buffer depends on user
specified value.
recv_sys_t::apply(): Handle the truncation of system tablespace
only if the recovered tablespace size is lesser than actual
existing size.
A simple "SET SESSION gtid_seq_no= DEFAULT" did not work, it would straight
up crash the server! Also, explicitly setting gtid_seq_no to 0 gave an error
in --gtid-strict-mode=1.
Setting to DEFAULT or 0 should disable any prior setting of
gtid_seq_no, so that the next transaction is allocated the next GTID
in sequence, as normal.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
prep_alter_part_table upon re-partitioning by system time
memcmp() tries to compare beyond the last member of interval because
sizeof(Vers_part_info::interval) is 80. It is sizeof of variable,
sizeof of type is 76.
Now we compare interval_t struct C++ way.
The assertion was to make sure we don't do vers_set_hist_part() for
SELECT (or any non-DML). But actually we must do it if SELECT calls
some function that does DML. Patch moves the assertion to non-routines
only.
differently react to SQL_MODE => unusable SHOW CREATE
Use abort_on_warning dependent on strict mode over create new table
like it is done for copy data and inplace alter.
- InnoDB fails to update the autoinc persistently after
bulk insert operation.
row_merge_bulk_t::write_to_index(): Update the autoinc value
persistently
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
MDEV-31749 sporadic assert in MDEV-30619 new test
If the workers of a parallel replica are busy (potentially with long
queues), but the SQL thread has no events left to distribute (so it
goes idle), then the next event that comes from the primary will
update mi->last_master_timestamp with its timestamp, even if the
workers have not yet finished.
This patch changes the parallel replica logic which updates
last_master_timestamp after idling from using solely sql_thread_caught_up
(added in MDEV-29639) to using the latter with rli queued/dequeued
event counters.
That is, if the queued count is equal to the dequeued count, it
means all events have been processed and the replica is considered
idle when the driver thread has also distributed all events.
Low level details of the commit include
- to make a more generalized test for Seconds_Behind_Master on
the parallel replica, rpl_delayed_parallel_slave_sbm.test
is renamed to rpl_parallel_sbm.test for this purpose.
- pause_sql_thread_on_next_event usage was removed
with the MDEV-30619 fixes. Rather than remove it, we adapt it
to the needs of this test case
- added test case to cover SBM spike of relay log read and LMT
update that was fixed by MDEV-29639
- rpl_seconds_behind_master_spike.test is made to use
the negate_clock_diff_with_master debug eval.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
ANALYZE FORMAT=JSON output now includes table.r_engine_stats which
has the engine statistics. Only non-zero members are printed.
Internally: EXPLAIN data structures Explain_table_acccess and
Explain_update now have handler* handler_for_stats pointer.
It is used to read statistics from handler_for_stats->handler_stats.
The following applies only to 10.9+, backport doesn't use it:
Explain data structures exist after the tables are closed. We avoid
walking invalid pointers using this:
- SQL layer calls Explain_query::notify_tables_are_closed() before
closing tables.
- After that call, printing of JSON output is disabled. Non-JSON output
can be printed but we don't access handler_for_stats when doing that.
Restrict vcol_cleanup_expr() in close_thread_tables() to only simple
locked tables mode. Prelocked is cleaned up like normal statement: in
close_thread_table().
First UPDATE under START TRANSACTION does nothing (nstate= nstate),
but anyway generates history. Since update vector is empty we get into
(!uvect->n_fields) branch which only adds history row, but does not do
update. After that we get current row with wrong (old) row_start value
and because of that second UPDATE tries to insert history row again
because it sees trx->id != row_start which is the guard to avoid
inserting multiple trx_id-based history rows under same transaction
(because we have same trx_id and we get duplicate error and this bug
demostrates that). But this try anyway fails because PK is based on
row_end which is constant under same transaction, so PK didn't change.
The fix moves vers_make_update() to an earlier stage of
calc_row_difference(). Therefore it prepares update vector before
(!uvect->n_fields) check and never gets into that branch, hence no
need to handle versioning inside that condition anymore.
Now trx->id and row_start are equal after first UPDATE and we don't
try to insert second history row.
== Cleanups and improvements ==
ha_innobase::update_row():
vers_set_fields and vers_ins_row are cleaned up into direct condition
check. SQLCOM_ALTER_TABLE check now is not used as this is dead code,
assertion is done instead.
upd_node->is_delete is set in calc_row_difference() just to keep
versioning code as much in one place as possible. vers_make_delete()
is still located in row_update_for_mysql() as this is required for
ha_innodbase::delete_row() as well.
row_ins_duplicate_error_in_clust():
Restrict DB_FOREIGN_DUPLICATE_KEY to the better conditions.
VERSIONED_DELETE is used specifically to help lower stack to
understand what caused current insert. Related to MDEV-29813.
