Analysis:
When we skip level when path is found, it changes the state of the json
engine. This breaks the sequence for json_get_path_next() which is called at
the end to ensure json document is valid and leads to crash.
Fix:
Use json_scan_next() at the end to check if json document has correct
syntax (is valid).
galera_gcache_recover and galera_gcache_recover_manytrx
grepping on error log is not always successful as messages
might be in different order or contain different values
galera_vote_sr
We need to make sure required table creation has replicated
as we use WSREP_ON=off
This commit changes backup execution (namely the block ddl phase),
so that node is not paused from cluster. Instead, the following
backup execution is declared as vulnerable for possible cluster
level conflicts, especially with DDL statement applying.
With this, the mariabackup execution may be aborted, if DDL
statements happen during backup execution. This abortable
backup execution is optional feature and may be
enabled/disabled by wsrep_mode: BF_ABORT_MARIABACKUP.
Note that old style node desync and pause, despite of
WSREP_MODE_BF_MARIABACKUP is needed if node is operating as
SST donor.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
The problem was that federated engine does not support comparable rowids
which was not taken into account by semijoin code.
Fixed by checking that we don't use semijoin with tables that does not
support comparable rowids.
Other things:
- Fixed some typos in the code comments
The reason things fails in 10.5 and above is that test_quick_select()
returns -1 (impossible range) for empty tables if there are any
conditions attached.
This didn't happen in 10.4 as the cost for a range was more than for
a table scan with 0 rows and get_key_scan_params() did not create any
range plans and thus did not mark the range as impossible.
The code that checked the 'impossible range' conditions did not take
into account all cases of LEFT JOIN usage.
Adding an extra check if the table is used with an ON condition in case
of 'impossible range' fixes the issue.
This commit contains only a mtr test for reproducing the issue in MDEV-29512
The actual fix will be pushed in wsrep-lib repository
The hanging in MDEV-29512 happens when binlog purging is attempted, and there is
one local BF aborted transaction waiting for commit monitor.
The test will launch two node cluster and enable binlogging with expire log days,
to force binlog purging to happen.
A local transaction is executed so that will become BF abort victim, and has advanced
to replication stage waiting for commit monitor for final cleanup (to mark position in innodb)
after that, applier is released to complete the BF abort and due to binlog configuration,
starting the binlog purging. This is where the hanging would occur, if code is buggy
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Created mtr test for reproducing the crash
Developed actual fix for the issue.
Setting THD::system_thread_info.rpl_sql_info for replayer thread,
same way as it is handled for appliers.
Recorded test result, with the fix
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
node->is_delete was incorrectly set to NO_DELETE for a set of operations.
In general we shouldn't rely on sql_command and look for more abstract ways
to control the behavior.
trg_event_map seems to be a suitable way. To mind replica nodes, it is ORed
with slave_fk_event_map, which stores trg_event_map when replica has
triggers disabled.
Problem:
=======
Mysqlbinlog cannot show the type of a compressed
column when two levels of verbosity is provided.
Solution:
========
Extend the log event printing logic to handle and
tag compressed types.
Behavioral Changes:
==================
Old: When mysqlbinlog is called in verbose mode and
the database uses compressed columns, an error is
returned to the user.
New: The output will append “ COMPRESSED” on the
type of compressed columns
Reviewed By
===========
Andrei Elkin <andrei.elkin@mariadb.com>
This issue was caused by the bug fix for
MDEV-30325 Wrong result upon range query using index condition
The bug could happen in the case of several overlapping key ranges
with OR
(Variant 3, initial variant was by Rex Jonston)
A LEFT JOIN with a constant as a column of the inner table produced wrong
query result if the optimizer had to write the inner table column into a
temp table. Query pattern:
SELECT ...
FROM (SELECT /*non-mergeable select*/
FROM t1 LEFT JOIN (SELECT 'Y' as Val) t2 ON ...) as tbl
Fixed this by adding Item_direct_view_ref::save_in_field() which follows
the pattern of Item_direct_view_ref's save_org_in_field(),
save_in_result_field() and val_XXX() functions:
* call check_null_ref() and handle NULL value
* if we didn't get a NULL-complemented row, call Item_direct_ref's function.
it's incorrect to use change_item_tree() to replace arguments
of top-level AND/OR, because they (arguments) are stored in a List,
so a pointer to an argument is in the list_node, and individual
list_node's of top-level AND/OR can be deleted in Item_cond::build_equal_items().
In that case rollback_item_tree_changes() will modify the deleted object.
Luckily, it's not needed to use change_item_tree() for top-level
AND/OR, because the whole top-level item is copied and preserved
in prep_where and prep_on, and restored from there.
So, just don't.
Additionally to the test case in the commit it fixes
* ASAN failure of main.opt_tvc --ps
* ASAN failure of main.having_cond_pushdown --ps
when an internal temporary table field is created from a real field,
a new temp field should only copy a default from the source field
when the latter has it
when creating a temp table field from an actual table field,
these two fields are supposed to be mostly identical
(except for BIT field storage), in particular, temp field should
have the same default as the orig field, even if the sql_mode has
been changed meanwhile (e.g. to include NO_ZERO_DATE)
regression from MDEV-29540 / 8c38939369.
INSERT SELECT errors needed to be unconditionally ignored.
As this touches the CREATE .. SELECT functionality, show
the equalivent test there.
This bug affected queries with nested left joins having the same last inner
table such that not_exists optimization could be applied to the most inner
outer join when optimizer chose to use join buffers. The bug could lead to
producing wrong a result set.
If the WHERE condition a query contains a conjunctive IS NULL predicate
over a non-nullable column of an inner table of a not nested outer join
then not_exists optimization can be applied to tho the outer join. With
this optimization when looking for matches for a certain record from the
outer table of the join the records of the inner table can be ignored
right after the first match satisfying the ON condition is found.
In the case of nested outer joins having the same last inner table this
optimization still can be applied but only if all ON conditions of the
embedding outer joins are satisfied. Such check was missing in the code
that tried to apply not_exists optimization when join buffers were used
for outer join operations.
This problem has been already fixed in the patch for bug MDEV-7992. Yet
there it was resolved only for the cases when join buffers were not used
for outer joins.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
This was caused by a bug in key_or() when SEL_ARG* key1 has been cloned
and is overlapping with SEL_ARG *key2
Cloning of SEL_ARG's happens only in very special cases, which is why this
bug has remained undetected for years.
It happend in the following query:
SELECT COUNT(*) FROM lineitem force index
(i_l_orderkey_quantity,i_l_shipdate) WHERE
l_shipdate < '1994-01-01' AND l_orderkey < 800 OR
l_quantity > 3 AND l_orderkey NOT IN ( 157, 1444 );
Because there are two different indexes that can be used and the code for
IN causes a 'tree_or', which causes all SEL_ARG's to be cloned.
Other things:
- While checking the code, I found a bug in SEL_ARG::SEL_ARG(SEL_ARG &arg)
- This was incrementing next_key_part->use_count as part of creating a
copy of an existing SEL_ARG.
This is however not enough as the 'reverse operation' when the copy is
not needed is 'key2_cpy.increment_use_count(-1)', which does something
completely different.
Fixed by calling increment_use_count(1) in SEL_ARG::SEL_ARG.
The problem was that when storing rows into a temporary table,
MIN/MAX items that where marked as constants (as theire value had
been computed at start of query) would be reset.
Fixed by not reseting MIN/MAX items that are marked as const in
Item_sum_min_max::clear().
* mariadb-service-convert to use mariadbd-safe
* galera_recovery to use mariadbd
* mtr - wsrep use mariadb executables
* debian/mariadb-server.mariadb.init use mariadbd-safe
* debian/tests/smoke uses mariadb instead of mysql as client.
Co-Author: Daniel Black <daniel@mariadb.org>
the parser couldn't parse `1=2 not between 3 and 5`
after `2` it expected only NOT2_SYM, but not NOT_SYM
(visible from the sql_yacc.output file), which resulted in
Syntax error ... near 'not between 3 and 4'
The parser was confused by a rather low NOT_SYM precedence and
%prec BETWEEN_SYM didn't resolve this confusion.
As a fix, let's remove any %precedence from NOT_SYM and
specify %prec explicitly in the only place where it matters for NOT_SYM.
In other places, such as for NOT BETWEEN, NOT_SYM won't have a
precedence, so bison won't be confused about it.
The idea is to put Item_direct_ref_to_item as a transparent and
permanent wrapper before a string which require conversion.
So that Item_direct_ref_to_item would be the only place where
the pointer to the string item is stored, this pointer can be changed
and restored during PS execution as needed. And if any permanent
(subquery) optimization would need a pointer to the item,
it'll use a pointer to the Item_direct_ref_to_item - which is
a permanent item and won't go away.
1. In case of system-versioned table add row_end into FTS_DOC_ID index
in fts_create_common_tables() and innobase_create_key_defs().
fts_n_uniq() returns 1 or 2 depending on whether the table is
system-versioned.
After this patch recreate of FTS_DOC_ID index is required for
existing system-versioned tables. If you see this message in error
log or server warnings: "InnoDB: Table db/t1 contains 2 indexes
inside InnoDB, which is different from the number of indexes 1
defined in the MariaDB" use this command to fix the table:
ALTER TABLE db.t1 FORCE;
2. Fix duplicate history for secondary unique index like it was done
in MDEV-23644 for clustered index (932ec586aa). In case of
existing history row which conflicts with currently inseted row we
check in row_ins_scan_sec_index_for_duplicate() whether that row
was inserted as part of current transaction. In that case we
indicate with DB_FOREIGN_DUPLICATE_KEY that new history row is not
needed and should be silently skipped.
3. Some parts of MDEV-21138 (7410ff436e) reverted. Skipping of
FTS_DOC_ID index for history rows made problems with purge
system. Now this is fixed differently by p.2.
4. wait_all_purged.inc checks that we didn't affect non-history rows
so they are deleted and purged correctly.
Additional FTS fixes
fts_init_get_doc_id(): exclude history rows from max_doc_id
calculation. fts_init_get_doc_id() callback is used only for crash
recovery.
fts_add_doc_by_id(): set max value for row_end field.
fts_read_stopword(): stopwords table can be system-versioned too. We
now read stopwords only for current data.
row_insert_for_mysql(): exclude history rows from doc_id validation.
row_merge_read_clustered_index(): exclude history_rows from doc_id
processing.
fts_load_user_stopword(): for versioned table retrieve row_end field
and skip history rows. For non-versioned table we retrieve 'value'
field twice (just for uniformity).
FTS tests for System Versioning now include maybe_versioning.inc which
adds 3 combinations:
'vers' for debug build sets sysvers_force and
sysvers_hide. sysvers_force makes every created table
system-versioned, sysvers_hide hides WITH SYSTEM VERSIONING
for SHOW CREATE.
Note: basic.test, stopword.test and versioning.test do not
require debug for 'vers' combination. This is controlled by
$modify_create_table in maybe_versioning.inc and these
tests run WITH SYSTEM VERSIONING explicitly which allows to
test 'vers' combination on non-debug builds.
'vers_trx' like 'vers' sets sysvers_force_trx and sysvers_hide. That
tests FTS with trx_id-based System Versioning.
'orig' works like before: no System Versioning is added, no debug is
required.
Upgrade/downgrade test for System Versioning is done by
innodb_fts.versioning. It has 2 combinations:
'prepare' makes binaries in std_data (requires old server and OLD_BINDIR).
It tests upgrade/downgrade against old server as well.
'upgrade' tests upgrade against binaries in std_data.
Cleanups:
Removed innodb-fts-stopword.test as it duplicates stopword.test
Adds new parameter $restart_bindir for restart_mysqld.inc.
Example:
let $restart_bindir= /home/midenok/src/mariadb/10.3b/build;
--source include/restart_mysqld.inc
It is good to return back original server before check_mysqld will be
run at the test end:
let $restart_bindir=;
--source include/restart_mysqld.inc
