Do not effectively set DEBUG_DBUG='d' by setting DEBUG_DBUG='-d,...'.
Instead, restore the saved value of DEBUG_DBUG.
Also, split the test innodb_fts.innodb_fts_misc_debug into
innodb_fts.crash_recovery and innodb_fts.misc_debug, and enable
these tests for --valgrind, the latter test for --embedded,
and the former tests for the non-debug server.
Encryption stores used key_version to
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION (offset 26)
field. Spatial indexes store RTREE Split Sequence Number
(FIL_RTREE_SPLIT_SEQ_NUM) in the same field. Both values
can't be stored in same field. Thus, current encryption
implementation does not support encrypting spatial indexes.
fil_space_encrypt(): Do not encrypt page if page type is
FIL_PAGE_RTREE (this is required for background
encryption innodb-encrypt-tables=ON).
create_table_info_t::check_table_options() Do not allow creating
table with ENCRYPTED=YES if table contains spatial index.
recv_log_format_0_recover(): Invoke log_decrypt_after_read() after
reading the old-format redo log buffer.
With this change, we will upgrade to an encrypted redo log that
is misleadingly carrying a MySQL 5.7.9 compatible format tag while
the log blocks (other than the header and the checkpoint blocks)
are in an incompatible, encrypted format.
That needs to be fixed by introducing a new redo log format tag that
indicates that the entire redo log is encrypted.
LOG_CHECKPOINT_ARRAY_END, LOG_CHECKPOINT_SIZE: Remove.
Change some error messages to refer to MariaDB 10.2.2 instead of
MySQL 5.7.9.
recv_find_max_checkpoint_0(): Do not abort when decrypting one of the
checkpoint pages fails.
If InnoDB is started in innodb_read_only mode such that
recovered incomplete transactions exist at startup
(but the redo logs are clean), an assertion will fail at shutdown,
because there would exist some non-prepared transactions.
logs_empty_and_mark_files_at_shutdown(): Do not wait for incomplete
transactions to finish if innodb_read_only or innodb_force_recovery>=3.
Wait for purge to finish in only one place.
trx_sys_close(): Relax the assertion that would fail first.
trx_free_prepared(): Also free recovered TRX_STATE_ACTIVE transactions
if innodb_read_only or innodb_force_recovery>=3.
Also, revert my earlier fix to MySQL 5.7 because this fix is more generic:
Bug#20874411 INNODB SHUTDOWN HANGS IF INNODB_FORCE_RECOVERY>=3
SKIPPED ANY ROLLBACK
trx_undo_fake_prepared(): Remove.
trx_sys_any_active_transactions(): Revert the changes.
Rewrite the test so that the main server is restarted, instead of
--exec $MYSQLD_CMD. In this way, the test can be run with Valgrind
and with any --mysqld=--innodb-page-size.
Also remove the workaround --skip-innodb-use-native-aio. It should
not be needed when we are inheriting the server parameters from
the test environment.
Datafile::validate_for_recovery(): Remove a redundant error message.
An error is already reported by Datafile::open_read_write() if the
file cannot be opened.
Also, do not assign SEARCH_ABORT, so that the full test will be executed
even if one step fails.
Test server startup with an empty encrypted redo log from 10.1.21.
FIXME: Pass the encryption parameters. Currently we only test startup
without properly set up encryption.
Remove the dependency on unzip. Instead, generate the InnoDB files
with perl.
log_block_checksum_is_ok(): Correct the error message.
recv_scan_log_recs(): Remove the duplicated error message for
log block checksum mismatch.
innobase_start_or_create_for_mysql(): If the server is in read-only
mode or if innodb_force_recovery>=3, do not try to modify the system
tablespace. (If the doublewrite buffer or the non-core system tables
do not exist, do not try to create them.)
innodb_shutdown(): Relax a debug assertion. If the system tablespace
did not contain a doublewrite buffer and if we started up in
innodb_read_only mode or with innodb_force_recovery>=3, it will not
be created.
dict_create_or_check_sys_tablespace(): Set the flag
srv_sys_tablespaces_open when the tables exist.
As noted in MDEV-11947, we should disable the InnoDB doublewrite buffer
during the tests, because when rewriting page checksums, innochecksum
would skip the pages that are in the doublewrite buffer area. Because
the doublewrite buffer is emptied on server startup and not shutdown,
we should initially start with the doublewrite buffer disabled, so that
there will be no warning messages for wrong page checksums in the
doublewrite buffer.
Also, correct the obvious typo where restart_options should have been
$restart_parameters, so that InnoDB is actually verifying that the
checksums were rewritten.
Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
As noted in MDEV-8841, any test that kills the server must issue
FLUSH TABLES, so that tables of crash-unsafe storage engines will
not be corrupted. Consistently issue this statement after any
call mtr.add_suppression() calls.
Also, do not invoke shutdown_server directly, but use helpers instead.
recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.
recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.
Do wait only if innodb_num_page_compressed_trim_op shows that
we have succeed to do at least few trim operations (and
that will happen on insert if possible).
Both dict_foreign_find_index and dict_foreign_qualify_index
did not consider virtual columns as possible foreign key
columns and there was assertion to disable virtual columns.
Fixed by also looking referencing and referenced column
from virtual columns if needed.
Problem was that implementation merged from 10.1 was incompatible
with InnoDB 5.7.
buf0buf.cc: Add functions to return should we punch hole and
how big.
buf0flu.cc: Add written page to IORequest
fil0fil.cc: Remove unneeded status call and add test is
sparse files and punch hole supported by file system when
tablespace is created. Add call to get file system
block size. Used file node is added to IORequest. Added
functions to check is punch hole supported and setting
punch hole.
ha_innodb.cc: Remove unneeded status variables (trim512-32768)
and trim_op_saved. Deprecate innodb_use_trim and
set it ON by default. Add function to set innodb-use-trim
dynamically.
dberr.h: Add error code DB_IO_NO_PUNCH_HOLE
if punch hole operation fails.
fil0fil.h: Add punch_hole variable to fil_space_t and
block size to fil_node_t.
os0api.h: Header to helper functions on buf0buf.cc and
fil0fil.cc for os0file.h
os0file.h: Remove unneeded m_block_size from IORequest
and add bpage to IORequest to know actual size of
the block and m_fil_node to know tablespace file
system block size and does it support punch hole.
os0file.cc: Add function punch_hole() to IORequest
to do punch_hole operation,
get the file system block size and determine
does file system support sparse files (for punch hole).
page0size.h: remove implicit copy disable and
use this implicit copy to implement copy_from()
function.
buf0dblwr.cc, buf0flu.cc, buf0rea.cc, fil0fil.cc, fil0fil.h,
os0file.h, os0file.cc, log0log.cc, log0recv.cc:
Remove unneeded write_size parameter from fil_io
calls.
srv0mon.h, srv0srv.h, srv0mon.cc: Remove unneeded
trim512-trim32678 status variables. Removed
these from monitor tests.
==== Description ====
Flashback can rollback the instances/databases/tables to an old snapshot.
It's implement on Server-Level by full image format binary logs (--binlog-row-image=FULL), so it supports all engines.
Currently, it’s a feature inside mysqlbinlog tool (with --flashback arguments).
Because the flashback binlog events will store in the memory, you should check if there is enough memory in your machine.
==== New Arguments to mysqlbinlog ====
--flashback (-B)
It will let mysqlbinlog to work on FLASHBACK mode.
==== New Arguments to mysqld ====
--flashback
Setup the server to use flashback. This enables binary log in row mode
and will enable extra logging for DDL's needed by flashback feature
==== Example ====
I have a table "t" in database "test", we can compare the output with "--flashback" and without.
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" > /tmp/1.sql
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" -B > /tmp/2.sql
Then, importing the output flashback file (/tmp/2.log), it can flashback your database/table to the special time (--start-datetime).
And if you know the exact postion, "--start-postion" is also works, mysqlbinlog will output the flashback logs that can flashback to "--start-postion" position.
==== Implement ====
1. As we know, if binlog_format is ROW (binlog-row-image=FULL in 10.1 and later), all columns value are store in the row event, so we can get the data before mis-operation.
2. Just do following things:
2.1 Change Event Type, INSERT->DELETE, DELETE->INSERT.
For example:
INSERT INTO t VALUES (...) ---> DELETE FROM t WHERE ...
DELETE FROM t ... ---> INSERT INTO t VALUES (...)
2.2 For Update_Event, swapping the SET part and WHERE part.
For example:
UPDATE t SET cols1 = vals1 WHERE cols2 = vals2
--->
UPDATE t SET cols2 = vals2 WHERE cols1 = vals1
2.3 For Multi-Rows Event, reverse the rows sequence, from the last row to the first row.
For example:
DELETE FROM t WHERE id=1; DELETE FROM t WHERE id=2; ...; DELETE FROM t WHERE id=n;
--->
DELETE FROM t WHERE id=n; ...; DELETE FROM t WHERE id=2; DELETE FROM t WHERE id=1;
2.4 Output those events from the last one to the first one which mis-operation happened.
For example:
Most notably, this includes MDEV-11623, which includes a fix and
an upgrade procedure for the InnoDB file format incompatibility
that is present in MariaDB Server 10.1.0 through 10.1.20.
In other words, this merge should address
MDEV-11202 InnoDB 10.1 -> 10.2 migration does not work
