THE EVENT STATUS.
Any ALTER EVENT statement on a disabled event enabled it back
(unless this ALTER EVENT statement explicitly disabled the event).
The problem was that during processing of an ALTER EVENT statement
value of status field was overwritten unconditionally even if new
value was not specified explicitly. As a consequence this field
was set to default value for status which corresponds to ENABLE.
The solution is to check if status field was explicitly specified in
ALTER EVENT statement before assigning new value to status field.
will create multiple running events.
A CREATE IF NOT EXIST on an event that existed and was enabled caused
multiple instances of the event to run. Disabling the event didn't help.
If the event was dropped, the event stopped running, but when created
again, multiple instances of the event were still running. The only way
to get out of this situation was to restart the server.
The problem was that Event_db_repository::create_event() didn't return
enough information to discriminate between situation when event didn't
exist and was created and when event did exist and was not created
(but a warning was emitted). As result in the latter case event
was added to in-memory queue of events second time. And this led to
unwarranted multiple executions of the same event.
The solution is to add out-parameter to Event_db_repository::create_event()
method which will signal that event was not created because it already
exists and so it should not be added to the in-memory queue.
Issue:
------
Due to prefix match, database like 'k' was matching with 'ka' and events of 'ka' we getting displayed for 'show event' of 'k'.
Resolution:
-----------
Scan for listing of events in a schema is made to be done on exact match of database (schema) name instead of just prefix.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
The problem is that creating a event could fail if the value of
the variable server_id didn't fit in the originator column of
the event system table. The cause is two-fold: it was possible
to set server_id to a value outside the documented range (from
0 to 2^32-1) and the originator column of the event table didn't
have enough room for values in this range.
The log tables (general_log and slow_log) also don't have a proper
column type to store the server_id and having a large server_id
value could prevent queries from being logged.
The solution is to ensure that all system tables that store the
server_id value have a proper column type (int unsigned) and that
the variable can't be set to a value that is not within the range.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
2. Avoid bad effects of bug 41925 Warning 1366 Incorrect string value:
... for column processlist.info
3. Add poll routines which ensure that subtests meet stable scenarios.
This does not change the sense of the subtests.
Bug#39848 events_bugs fails sporadically on pushbuild
(missing rows in table event_log)
Details: Reimplement the subtest for BUG 28924
- check if the number of rows within the table
event_log changes but don't print rows
because the number varies depending on
load on testing box
- shift DROP USER befor DROP EVENT
= Subtest fits again to old bug
- remove no more needed comments + variables
Bug#39863 events_bugs fails sporadically on pushbuild
(extra processes in I_S.PROCESSLIST)
Details: Abort with appropriate message to the protocol if
release_lock() does not has the intended effect.
This cannot prevent problems caused by the probably
buggy release_lock() but it reveals if we had a
problem in this area.
Bug#39978 main.events_bugs does not clean up
Detail: Restore global.event_scheduler = ON at end of test
Bug#39569 events_bugs fails sporadically on pushbuild
(should have failed with errno 1539)
Detail: Set $wait_timeout to 4 instead of 2
- Fix two instabilities (result sets pulled from processlist in
subtest for bug 16407) which were found during tests with high
parallel I/O load
- Minor improvements of formatting
Details:
- Add comments
- Remove tabs and trailing blanks
- Add line breaks for better readability
The problem is that one can not create a stored routine if sql_mode
contains NO_ENGINE_SUBSTITUTION or PAD_CHAR_TO_FULL_LENGTH. Also when
a event is created, the mode is silently lost if sql_mode contains one
of the aforementioned. This was happening because the table definitions
which stored sql_mode values weren't being updated to accept new values
of sql_mode.
The solution is to update, in a backwards compatible manner, the various
table definitions (columns) that store the sql_mode value to take into
account the new possible values. One incompatible change is that if a event
that is being created can't be stored to the mysql.event table, an error
will be raised.
The tests case also ensure that new SQL modes will be added to the mysql.proc
and mysql.event tables, otherwise the tests will fail.
There actually were several problems here:
- WRITE-lock is required to load events from the mysql.event table,
but in the read-only mode an ordinary user can not acquire it;
- Security_context::master_access attribute was not properly
initialized in Security_context::init(), which led to differences
in behavior with and without debug configure options.
- if the server failed to load events from mysql.event, it forgot to
close the mysql.event table, that led to the coredump, described
in the bug report.
The patch is to fix all these problems:
- Use the super-user to acquire WRITE-lock on the mysql.even table;
- The WRITE-lock is acquired by the event scheduler in two cases:
- on initial loading of events from the database;
- when an event has been executed, so its attributes should
be updated.
Other cases when WRITE-lock is needed for the mysql.event table
happen under the user account. So, nothing should be changed there
for the read-only mode. The user is able to create/update/drop
an event only if he is a super-user.
- Initialize Security_context::master_access;
- Close the mysql.event table in case something went wrong.
Creating an EVENT to be executed at a time close to the end of the allowed
range (2038.01.19 03:14:07 UTC) would cause the server to crash. The
expected behavior is to accept all calendar times within the interval and
reject all other values without crashing.
This patch replaces the function 'sec_to_epoch_TIME' with a Time_zone API call.
This function was broken because it invoked the internal function 'sec_to_epoch'
without respecting the restrictions on the function parameters (and this caused
assertion failure). It also was used as a reverse function to
Time_zone_utc::gmt_sec_to_TIME which it isn't.
results.
When executing a CREATE EVENT statement with ON COMPLETION NOT PRESERVE
clause (explicit or implicit) and completion date in the past, we do not
create the event. Or, put it differently, we create it and then drop
immediately.
A warning is issued in this case, not an error -- we want to load
successfully old database dumps, and such dumps may contain events
that are no longer valid.
Update the warning text to not imply an erroneous condition.
- BUG#11986: Stored routines and triggers can fail if the code
has a non-ascii symbol
- BUG#16291: mysqldump corrupts string-constants with non-ascii-chars
- BUG#19443: INFORMATION_SCHEMA does not support charsets properly
- BUG#21249: Character set of SP-var can be ignored
- BUG#25212: Character set of string constant is ignored (stored routines)
- BUG#25221: Character set of string constant is ignored (triggers)
There were a few general problems that caused these bugs:
1. Character set information of the original (definition) query for views,
triggers, stored routines and events was lost.
2. mysqldump output query in client character set, which can be
inappropriate to encode definition-query.
3. INFORMATION_SCHEMA used strings with mixed encodings to display object
definition;
1. No query-definition-character set.
In order to compile query into execution code, some extra data (such as
environment variables or the database character set) is used. The problem
here was that this context was not preserved. So, on the next load it can
differ from the original one, thus the result will be different.
The context contains the following data:
- client character set;
- connection collation (character set and collation);
- collation of the owner database;
The fix is to store this context and use it each time we parse (compile)
and execute the object (stored routine, trigger, ...).
2. Wrong mysqldump-output.
The original query can contain several encodings (by means of character set
introducers). The problem here was that we tried to convert original query
to the mysqldump-client character set.
Moreover, we stored queries in different character sets for different
objects (views, for one, used UTF8, triggers used original character set).
The solution is
- to store definition queries in the original character set;
- to change SHOW CREATE statement to output definition query in the
binary character set (i.e. without any conversion);
- introduce SHOW CREATE TRIGGER statement;
- to dump special statements to switch the context to the original one
before dumping and restore it afterwards.
Note, in order to preserve the database collation at the creation time,
additional ALTER DATABASE might be used (to temporary switch the database
collation back to the original value). In this case, ALTER DATABASE
privilege will be required. This is a backward-incompatible change.
3. INFORMATION_SCHEMA showed non-UTF8 strings
The fix is to generate UTF8-query during the parsing, store it in the object
and show it in the INFORMATION_SCHEMA.
Basically, the idea is to create a copy of the original query convert it to
UTF8. Character set introducers are removed and all text literals are
converted to UTF8.
This UTF8 query is intended to provide user-readable output. It must not be
used to recreate the object. Specialized SHOW CREATE statements should be
used for this.
The reason for this limitation is the following: the original query can
contain symbols from several character sets (by means of character set
introducers).
Example:
- original query:
CREATE VIEW v1 AS SELECT _cp1251 'Hello' AS c1;
- UTF8 query (for INFORMATION_SCHEMA):
CREATE VIEW v1 AS SELECT 'Hello' AS c1;
