The failing assertion was written with the assumption that a NULL
string can never be passed to my_strtod(). However, an empty string
may be passed under some circumstances by passing str == NULL and
*end == NULL.
Fixed the assertion to take the above case into account.
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Problem: caseup_multiply and casedn_multiply members
were not initialized for a dynamic collation, so
UPPER() and LOWER() functions returned empty strings.
Fix: initializing the members properly.
Adding tests:
mysql-test/r/ctype_ldml.result
mysql-test/t/ctype_ldml.test
Applying the fix:
mysys/charset.c
(Original patch by Sinisa Milivojevic)
The YEAR(4) value of 2000 was equal to the "bad" YEAR(4) value of 0000.
The get_year_value() function has been modified to not adjust bad
YEAR(4) value to 2000.
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
The problem is that when we make conditon for
grouped result const part of condition is cut off.
It happens because some parts of 'having' condition
which refer to outer join become const after
make_join_statistics. These parts may be lost
during further having condition transformation
in JOIN::exec. The fix is adding 'having'
condition check for const tables after
make_join_statistics is performed.
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
This has been back-ported from 6.0 as the problems proved to afflict
5.1 as well.
The fix exposed two new bugs. They were reported as follows.
Bug no 52174: Sometimes wrong plan when reading a MAX value
from non-NULL index
Bug no 52173: Reading NULL value from non-NULL index gives wrong
result in embedded server
Both bugs taken together affect a much smaller class of queries than #47762,
so the fix stays for now.
Optimizer erroneously translated LEFT JOIN into INNER JOIN.
It leads to cutting rows with NULL right side. It happens
because Item_row uses not_null_tables() method form the
base(Item) class and does not calculate 'null tables'
properly. The fix is adding calculation of 'not null tables'
to Item_row.
The crash happens because of discrepancy between values of
conts_tables and join->const_table_map(make_join_statisctics).
Calculation of conts_tables used condition with
HA_STATS_RECORDS_IS_EXACT flag check. Calculation of
join->const_table_map does not use this flag check.
In case of MERGE table without union with index
the table does not become const table and
thus join_read_const_table() is not called
for the table. join->const_table_map supposes
this table is const and later in make_join_select
this table is used for making&calculation const
condition. As table record buffer is not populated
it leads to crash.
The fix is adding a check if an engine supports
HA_STATS_RECORDS_IS_EXACT flag before updating
join->const_table_map.
All numeric operators and functions on integer, floating point
and DECIMAL values now throw an 'out of range' error rather
than returning an incorrect value or NULL, when the result is
out of supported range for the corresponding data type.
Some test cases in the test suite had to be updated
accordingly either because the test case itself relied on a
value returned in case of a numeric overflow, or because a
numeric overflow was the root cause of the corresponding bugs.
The latter tests are no longer relevant, since the expressions
used to trigger the corresponding bugs are not valid anymore.
However, such test cases have been adjusted and kept "for the
record".
reverse DNS lookup of "localhost" returns "broadcasthost" on Snow Leopard, and NULL on most others.
Simply ignore the output, as this is not an essential part of UDF testing.
Corrected some packaging bugs:
- install mysqlservices library
- install libmysqlclient_r.so.{16,16.0.0} as links
to libmysqlclient.so
- install libmysqld-debug.a
- install my_safe_process, my_safe_kill and
symlinks to mysql-test-run.pl (mtr, mysql-test-run)
into correct place ${INSTALL_MYSQLTESTDIR}
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
definition at engine
If a single ALTER TABLE contains both DROP INDEX and ADD INDEX using
the same index name (a.k.a. index modification) we need to disable
in-place alter table because we can't ask the storage engine to have
two copies of the index with the same name even temporarily (if we
first do the ADD INDEX and then DROP INDEX) and we can't modify
indexes that are needed by e.g. foreign keys if we first do
DROP INDEX and then ADD INDEX.
Fixed the problem by disabling in-place ALTER TABLE for these cases.
In BUG#49562 we fixed the case where numeric user var events
would not serialize the flag stating whether the value was signed
or unsigned (unsigned_flag). This fixed the case that the slave
would get an overflow while treating the unsigned values as
signed.
In this bug, we find that the unsigned_flag can sometimes change
between the moment that the user value is recorded for binlogging
purposes and the actual binlogging time. Since we take the
unsigned_flag from the runtime variable data, at binlogging time,
and the variable value is comes from the copy taken earlier in
the execution, there may be inconsistency in the
User_var_log_event between the variable value and its
unsigned_flag.
We fix this by also copying the unsigned_flag of the
user_var_entry when its value is copied, for binlogging
purposes. Later, at binlogging time, we use the copied
unsigned_flag and not the one in the runtime user_var_entry
instance.
Non-determinism of the test was caused by lack of setting a proper value to hb period,
actually fixed by BUG@50767.
These fixes aim at possible non-determinism in comparison of received
hb events by master and slave in the circular part of the test.
Even though the HB periods ratio was choosen to be as high as 10, it's still incorrect
to compare number of hb-events basing only a relation between their periods.
Yet another issue is relatively short 60 secs timeout of wait_for_status_var.inc
makes valgrind runs to fail.
Fixed with deploying wait_for_slave_io_to_start afront of calling wait_for_status_var.
The test is made runnable only with MIXED binlog-format as it has close to 1 min
total exec time and there is nothing format specific in it.
DDL no longer aborts mysql_lock_tables(), and hence
we no longer need to support need_reopen flag of this
call.
Remove the flag, and all the code in the server
that was responsible for handling the case when
it was set. This allowed to simplify:
open_and_lock_tables_derived(), the delayed thread,
multi-update.
Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH,
since we now only support this flag in open_table().
Rename MYSQL_LOCK_PERF_SCHEMA to MYSQL_LOCK_LOG_TABLE,
to avoid confusion.
Move the wait for the global read lock for cases
when we do updates in SELECT f1() or DO (UPDATE) to
open_table() from mysql_lock_tables(). When waiting
for the read lock, we could raise need_reopen flag,
which is no longer present in mysql_lock_tables().
Since the block responsible for waiting for GRL
was moved, MYSQL_LOCK_IGNORE_GLOBAL_READ_LOCK
was renamed to MYSQL_OPEN_IGNORE_GLOBAL_READ_LOCK.
There are two issues fixed here:
1. We needed to update the result file, for some of
mysqlbinlog_* tests, because now the some padding chars
are not output anymore.
2. We needed to change the Field_string::pack so that
for BINARY types the padding chars are not packed
(lengthsp will return full length for these types).
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/subselect.result
Text conflict in mysql-test/r/subselect3.result
Text conflict in mysql-test/r/type_datetime.result
Text conflict in sql/share/Makefile.am
- Fixing crash on attempt to create a fulltext index with an utf8mb4 column
- fixing wrong border width for supplementary characters in mysql client:
mysql --default-character-set=utf8mb4 -e "select concat(_utf32 0x20000,'a')"
Split rpl_row_charset into:
- rpl_row_utf16.
- rpl_row_utf32.
This way these tests can run independently if server supports
either one of the charsets but not both.
Cleaned up rpl_row_utf32 which had a spurious instruction:
-- let $reset_slave_type_conversions= 0
In BUG#51787 we were using the wrong charset to print out the
data. We were using the field charset for the string that would
hold the information. This caused the assertion, because the
string length was not aligned with UTF32 bytes requirements for
storage.
We fix this by using &my_charset_latin1 in the string object
instead of the field->charset(). As a side-effect, we needed to
extend the show_sql_type interface so that it took the field
charset is now passed as a parameter, so that one is able to
calculate the correct field size.
In BUG#51716 we had issues with Field_string::pack and
Field_string::unpack. When packing, the length was incorrectly
calculated. When unpacking, the padding the string would be
padded with the wrong bytes (a few bytes less than it should).
We fix this by resorting to charset abstractions (functions) that
calculate the correct length when packing and pad correctly the
string when unpacking.
LOCK kills the server.
Prohibit FLUSH TABLES WITH READ LOCK application to views or
temporary tables.
Fix a subtle bug in the implementation when we actually
did not remove table share objects from the table cache after
acquiring exclusive locks.
The problem was that in read only mode (read_only enabled),
the server would mistakenly deny data modification attempts
for temporary tables which belong to a transactional storage
engine (eg. InnoDB).
The solution is to allow transactional temporary tables to be
modified under read only mode. As a whole, the read only mode
does not apply to any kind of temporary table.
The test case crashes and recovers the server twice, and while
recovering InnoDB sets innodb_file_format_check to different
format on second restart. This makes the test case clean up
check to fail.
We fix this by deploying the option "--innodb_file_format_check='ON'"
in slave startup configuration. This makes the innodb_file_format_check
to not change on secod restart.
SET autocommit=1 while XA transaction is active may
cause various side effects, including memory corruption
and server crash.
The problem is that SET autocommit=1 and further queries
attempt to commit local transaction, whereas XA transaction
is still active.
As local and XA transactions are mutually exclusive, this
patch forbids enabling autocommit mode while XA transaction
is active.
MySQL uses two source layouts when building : the bzr
layout and the source package layout.
The previous fix for bug 35250 contained 1 change that is
valid for both modes and a number of changes that are valid
only for the bzr source layout.
The important thing was to fix the source package layout.
And for this the change in configure.in was sufficient.
It's not trivial (and not requested by this bug) to support
VPATH builds from the bzr trees.
This is why the other changes are reverted and the change to
fix the VPATH build for source distributions is left intact.
The test case added in previous patch missed a RESET MASTER on
test start up. Without it, showing binary log contents can
sometimes show spurious entries from previously executed tests,
ultimately causing test failure - result mismatch.
The test file was added in:
revid:luis.soares@sun.com-20100224190153-k0bpdx9abe88uoo2
This patch also moves the test case into binlog_innodb_row.test
file. This way we avoid having yet another test file,
binlog_row_innodb_truncate.test, whose only purpose is to host
one test case. This had been actually suggested during original
patch review, but somehow the binlog_innodb_row was missed when
searching for a file to host the test case.
Ensure that we store the correct cached_field_type whenever we cache Field items
(in this case it allows us to compare dates as dates, rather than strings)
NULL column for NULL
The optimization to read MIN() and MAX() values from an
index did not properly handle comparisons with NULL
values. Fixed by giving up the particular optimization step
if there are non-NULL safe comparisons with NULL values, as
the result is NULL anyway.
Also, Oracle copyright notice was added to all files.
Base Tables
The type inferrence of a view column caused the result to be
interpreted as the wrong type: DATE colums were interpreted
as TIME and TIME as DATETIME. This happened because view
columns are represented by Item_ref objects as opposed to
Item_field's. Item_ref had no method for retrieving a TIME
value and thus was forced to depend on the default
implementation for any expression, which caused the
expression to be evaluated as a string and then parsed into
a TIME/DATETIME value.
Fixed by letting Item_ref classes forward the request for a
TIME value to the referred Item - which is a field in this
case - this reads the TIME value directly without
conversion.
index cardinalities=1
Parallel repair didn't poroperly update index cardinality
in certain cases.
When myisam_sort_buffer_size is not enough to store all
keys, index cardinality was updated before index was
actually written, when no index statistic is available.
(regression)
Problem was that partition pruning did not exclude the
last partition if the range was beyond it
(i.e. not using MAXVALUE)
Fix was to not include the last partition if the
partitioning function value was not within the partition
range.
The problem was that UNINSTALL PLUGIN wasn't performing privilege
checks before removing a plugin. Any user (including users without
any kind of privileges) could uninstall any plugin.
The solution is to verify if the user has the DELETE privilege for
the mysql.plugin table before uninstalling a plugin.
The problem is that Item_direct_view_ref which is inherited
from Item_ident updates orig_table_name and table_name with
the same values. The fix is introduction of new constructor
into Item_ident and up which updates orig_table_name and
table_name separately.
The problem is that not all column names retrieved from a SELECT
statement can be used as view column names due to length and format
restrictions. The server failed to properly check the conformity
of those automatically generated column names before storing the
final view definition on disk.
Since columns retrieved from a SELECT statement can be anything
ranging from functions to constants values of any format and length,
the solution is to rewrite to a pre-defined format any names that
are not acceptable as a view column name.
The name is rewritten to "Name_exp_%u" where %u translates to the
position of the column. To avoid this conversion scheme, define
explict names for the view columns via the column_list clause.
Also, aliases are now only generated for top level statements.
The problem was that bits of the destructive equality propagation
optimization weren't being undone after the execution of a stored
program. Modifications to the parse tree that are based on transient
properties must be undone to enable the re-execution of stored
programs.
The solution is to cleanup any references to predicates generated
by the equality propagation during the execution of a stored program.
Spatial indexes were not checking for out-of-record condition in
the handler next command when the previous command didn't found
rows.
Fixed by making the rtree index to check for end of rows condition
before re-using the key from the previous search.
Fixed another crash if the tree has changed since the last search.
Added a test case for the other error.
Before this fix, the performance schema instrumentation
in mdl.h / mdl.cc was incomplete, causing:
- build warnings,
- no data collection for the performance schema
This fix:
- added instrumentation helpers for the new preferred
reader read write lock, mysql_prlock_*
- implemented completely the performance schema
instrumentation of mdl.h / mdl.cc
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/having.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in storage/federated/ha_federated.cc
consider clustered primary keys
Choosing a shortest index for the covering index scan,
the optimizer ignored the fact, that the clustered primary
key read involves whole table data.
The find_shortest_key function has been modified to
take into account that fact that a clustered PK has a
longest key of possible covering indices.
Before this fix, mysql_upgrade would always drop and re create
the performance_schema database.
This in theory could destroy user data created using 5.1 or older versions.
With this fix, mysql_upgrade checks the content of the
performance_schema database before droping it.
auto_increment on duplicate entry
The bug was that when INSERT_ID was used and the storage
engine was told to release any reserved but not used
auto_increment values, it set the highest auto_increment
value to INSERT_ID.
The fix was to check if the auto_increment value was forced
by user (INSERT_ID) or by slave-thread, i.e. not auto-
generated. So that it is only allowed to release generated
values.
Spatial indexes were not checking for out-of-record condition in
the handler next command when the previous command didn't found
rows.
Fixed by making the rtree index to check for end of rows condition
before re-using the key from the previous search.
Fixed another crash if the tree has changed since the last search.
Added a test case for the other error.
Bug#51676 Server crashes on SELECT, ORDER BY on 'utf8mb4' column
An additional fix. We should use 0xFFFD as a weight for supplementary
characters, not the "weight for character U+FFFD".
Problem was block_size on partitioned tables was not set,
resulting in keys_per_block was not correct which affects
the cost calculation for read time of indexes (including
cost for group min/max).Which resulted in a bad optimizer
decision.
Fixed by setting stats.block_size correctly.
on decimal column
The problem was that there was no check to disallow DECIMAL
columns in the code (it was accepted as if it was INTEGER).
Solution was to correctly disallow DECIMAL columns in
COLUMNS partitioning. As documented.
mode
When the master was executing in sql_mode='traditional' (which
implies that really_abort_on_warning returns TRUE - because of
MODE_STRICT_ALL_TABLES), the error code (ER_DUP_ENTRY in the
reported case) was not being set in the
Query_log_event. Therefore, even if a failure was to be expected
when replaying the statement on the slave, a failure would occur,
because the Query_log_event was not transporting the expected
error code, but 0 instead.
This was because when the master was getting the error code to
set it in the Query_log_event, the executing thread would be
assumed to have been killed:
THD::killed==THD::KILL_BAD_DATA. This would make the error code
fetch routine not to check thd->main_da.sql_errno(), but instead
the thd->killed value. What's more, is that the server would
thd->killed value if thd->killed == THD::KILL_BAD_DATA and return
0 instead. So this is a double inconsistency, as the we should
not even check thd->killed but rather thd->main_da.sql_errno().
We fix this by extending the condition used to choose whether to
check the thd->main_da.sql_errno() or thd->killed, so that it
takes into consideration the case when:
thd->killed==THD::KILL_BAD_DATA.
+ failing statements
Implicit DROP event for temporary table is not getting
LOG_EVENT_THREAD_SPECIFIC_F flag, because, in the previous
executed statement in the same thread, which might even be a
failed statement, the thread_specific_used flag is set to
FALSE (in mysql_reset_thd_for_next_command) and not set to TRUE
before connection is shutdown. This means that implicit DROP
event will take the FALSE value from thread_specific_used and
will not set LOG_EVENT_THREAD_SPECIFIC_F in the event header. As
a consequence, mysqlbinlog will not print the pseudo_thread_id
from the DROP event, because one of the requirements for the
printout is that this flag is set to TRUE.
We fix this by setting thread_specific_used whenever we are
binlogging a DROP in close_temporary_tables, and resetting it to
its previous value afterward.
autotools runs
- Fix recognition of --with-debug=full in configure wrapper
- Remove CMakeCache.txt in configure wrapper, to match the original
- Fix recognition of max-no-ndb
- Fix broken dependencies of mysql_fix_privilege_table.sql from
mysql_system_tables.sql and mysql_system_tables_fix.sql
- Add "distclean target" that informs user about appropriate bzr command
work in 5.1.40)
MERGE engine fails to open child table from a different
database if child table/database name contains characters
that are subject for table name to filename encoding
(WL1324).
Another problem is that MERGE engine didn't properly open
child table from the same database if child table name
contains characters like '/', '#'.
The problem was that table name to file name encoding was
applied inconsistently:
* On CREATE: encode table name + database name if child
table is in different database; do not encode table
name if child table is in the same database;
* No decoding on open.
With this fix child table/database names are always
encoded on CREATE and decoded on open. Compatibility
with older tables preserved.
Along with this patch comes fix for SHOW CREATE TABLE,
which used to show child table/database path instead
of child table/database names.
Diagnostics_area::set_ok_status on DROP FUNCTION
This assert tests that the server is not trying to send "ok" to
the client if an error has occured during statement processing.
In this case, the assert was triggered by lock timeout errors when
accessing system tables to do an implicit REVOKE after executing
DROP FUNCTION/PROCEDURE. In practice, this was only likely to
happen with very low values for "lock_wait_timeout" (in the bug report
1 second was used). These errors were ignored and the server tried
to send "ok" to the client, triggering the assert.
The patch for Bug#45225 introduced lock timeouts for metadata locks.
This made it possible to get timeouts when accessing system tables.
Note that a followup patch for Bug#45225 pushed after this
bug was reported, changed accessing of system tables such
that the user-supplied timeout value is ignored and the maximum
timeout value is used instead. This exact bug was therefore
only noticeable in the period between the initial Bug#45225 patch
and the followup patch.
However, the same problem could occur for any errors during revoking
of privileges - not just timeouts. This patch fixes the problem by
making sure that any errors during revoking of privileges are
reported to the client.
Test case added to sp-destruct.test. Since the original bug is not
reproducable now that system tables are accessed using a a long
timeout value, this test instead calls DROP FUNCTION with a grant
system table missing.
If an outer query is broken, a subquery might not even get set up.
EXPLAIN EXTENDED did not expect this and merrily tried to de-ref all
of the half-setup info.
We now catch this case and print as much as we have, as it doesn't cost us
anything (doesn't make regular execution slower).
backport from 5.1
insert...select
Queries following bulk insert into an empty MyISAM table
may break it. This was pure MyISAM problem.
When bulk insert into an empty table is complete, MyISAM
may want to enable indexes via repair by sort. If repair
by sort fails (e.g. insufficient buffer), MyISAM failover
to repair with key cache, requesting repair of data file.
Repair of data file performs data file substitution. This
means that current table instance will point to new data
file. Other cached table instances are still pointing to
an old, deleted data file.
This is fixed by not requesting repair of data file
during enable indexes.
Explicit REPAIR is not affected, since it flushes all
table instances.
Add deprecation warning when variable optimizer_search_depth is given
the value 63.
mysql-test/r/greedy_optimizer.result
Updated with warning text.
mysql-test/r/mysqld--help-notwin.result
Updated with warning from mysqld --help --verbose.
mysql-test/r/mysqld--help-win.result
Updated with warning from mysqld --help --verbose.
sql/sys_vars.cc
Added an update check function to the constructor invocation for
the optimizer_search_depth variable. The function emits a
warning message for the value 63.
START SLAVE UNTIL MASTER ... specifies only SQL thread to stop.
rpl_slave_skip erronously deployed waiting for stop of both threads.
Corrected with deploying the correct macro.
Notice, earlier a similar bug@47749 was fixed in mysql-trunk.
