FAILING ASSERTION: FLEN == LEN
Problem:
Broken invariant triggered when building a unique index on a
binary column and the input data contains duplicate keys. This was broken
in debug builds only.
Fix:
Fixed length of the binary datatype can be greater than length of
the shorter prefix on which index is being created.
ACCEPTED BUT PARSED INCORRECTLY
When we are setting the value in a system variable,
We can set it like
set sys_var="Iden1.Iden2"; //1
set sys_var='Iden1.Iden2'; //2
set sys_var=Iden1.Iden2; //3
set sys_var=.ident1.ident2; //4
set sys_var=`Iden1.Iden2`; //5
While parsing, for case 1(when ANSI_QUOTES is enable) and 2,
we will take as string literal(we will make item of type Item_string).
for case 3 & 4, taken as Item_field, where Iden1 is a table name and
iden2 is a field name.
for case 5, again Item_field type, where iden1.iden2 is taken as
field name.
Now in case 1, when we are assigning some value to system variable
(which can take string or enumerate type data), we are setting only
field part.
This means only iden2 value will be set for system variable. This
result in wrong result.
Solution:
(for string type) We need to Document that we are not allowed to set
system variable which takes string as identifier, otherwise result
in unexpected behaviour.
(for enumerate type)
if we pass iden1.iden2, we will give an error ER_WRONG_TYPE_FOR_VAR
(Incorrect argument type to variable).
mysql-test/suite/sys_vars/t/general_log_file_basic.test:
Earlier we used to give ER_WRONG_VALUE_FOR_VAR error, but in the patch of
(Bug32748-Inconsistent handling of assignments to general_log_file/slow_query_log_file)
they quoted this line.But i am not able to find any relation of this with the changes of
patch. So i think We should give error in this case.
mysql-test/suite/sys_vars/t/slow_query_log_file_basic.test:
Earlier we used to give ER_WRONG_VALUE_FOR_VAR error, but in the patch of
(Bug32748-Inconsistent handling of assignments to general_log_file/slow_query_log_file)
they quoted this line.But i am not able to find any relation of this with the changes of
patch. So i think We should give error in this case.
Problem:
In the clustered index, when an update operation is done the overall
scenario (after rb#4479) is as follows:
1. Delete mark the old record that is to be updated.
2. The old record disowns the blobs.
3. Insert the new record into clustered index.
4. For non-updated blobs, new record must own it. Verified by assert.
5. For non-updated blobs, in new record marked as inherited.
Scenario involving DB_LOCK_WAIT:
If step 3 times out, then we will skip 1 and 2 and will continue from
step 3. This skipping is achieved by the UPD_NODE_INSERT_BLOB state.
In this case, step 4 is not correct. Because of step 1, the new
record need not own the blobs. Hence the assert failure.
Solution:
The assert in step 4 is removed. Instead code is added to ensure that
the record owns the blob.
Note:
This is a regression caused by rb#4479.
rb#4571 approved by Marko
AUTO_INCREMENT_INCREMENT
Problem:
=======
When auto_increment_increment system variable decreases,
immediate next value of auto increment column is not affected.
Solution:
========
Get the previous inserted value of auto increment column by
subtracting the previous auto_increment_increment from next
auto increment value. After that calculate the current autoinc value
using newly changed auto_increment_increment variable.
Approved by Sunny [rb#4394]
Problem:
The function row_upd_changes_ord_field_binary() is used to decide whether to
use row_upd_clust_rec_by_insert() or row_upd_clust_rec(). The function
row_upd_changes_ord_field_binary() does not make use of charset information.
Based on binary comparison it decides that r1 and r2 differ in their ordering
fields.
In the function row_upd_clust_rec_by_insert(), an update is done by delete +
insert. These operations internally make use of cmp_dtuple_rec_with_match()
to compare records r1 and r2. This comparison takes place with the use of
charset information.
This means that it is possible for the deleted record to be reused in the
subsequent insert. In the given scenario, the characters 'a' and 'A' are
considered equal in the my_charset_latin1. When this happens, the ownership
information of externally stored blobs are not correctly handled.
Solution:
When an update is done by delete followed by insert, disown the relevant
externally stored fields during the delete marking itself (within the same
mtr). If the insert succeeds, then nothing with respect to blob ownership
needs to be done. If the insert fails, then the disown done earlier will be
removed when the operation is rolled back.
rb#4479 approved by Marko.
The maximum value for innodb_thread_sleep_delay is 4294967295 (32-bit) or
18446744073709551615 (64-bit) microseconds. This is way too big, since
the max value of innodb_thread_sleep_delay is limited by
innodb_adaptive_max_sleep_delay if that value is set to non-zero value
(its default is 150,000).
Solution
The maximum value of innodb_thread_sleep_delay should be the same as
the maximum value of innodb_adaptive_max_sleep_delay, which is 1000000.
Approved by Jimmy, rb#4429
FAILS TO DROP CREATED EVENTS:
- Check for triggers should exclude mtr's own
- Move the code to before checksum table as it might affect result
of some autdit_log tests (does in 5.6)
- Replace SHOW STATUS LIKE 'slave_open_temp_tables' to be like in 5.6
Bug#17867117 - ERROR RESULT WHEN "COUNT + DISTINCT + CASE WHEN" NEED MERGE_WALK
Problem:
COUNT DISTINCT gives incorrect result when it uses a Unique
Tree and its last inserted record has null value.
Here is how COUNT DISTINCT is processed, given that this query is not
using loose index scan.
When a row is produced as a result of joining tables (there is only
one table here), we store the SELECTed value in a Unique tree. This
allows elimination of any duplicates, and thus implements DISTINCT.
When we have processed all rows like this, we walk the Unique tree,
counting its elements, in Aggregator_distinct::endup() (tree->walk());
for each element we call Item_sum_count::add(). Such function wants to
ignore any NULL value, for that it checks item_sum -> args[0] ->
null_value. It is a mistake: when walking the Unique tree, the value
to be aggregated is not item_sum ->args[0] but rather table ->
field[0].
Solution:
instead of item_sum -> args[0] -> null_value, use arg_is_null(), which
knows where to look (like in fix for bug 57932).
As a consequence of this solution, we have to make arg_is_null() a
little more general:
1) Because it was so far only used for AVG() (which always has a
single argument), this function was looking at a single argument; now
that it has to work with COUNT(DISTINCT expression1,expression2), it
must look at all arguments.
2) Because we start using arg_is_null () for COUNT(DISTINCT), i.e. in
Item_sum_count::add (), it implies that we are also using it for
COUNT(no DISTINCT) (same add ()). For COUNT(no DISTINCT), the
nullness to check is that of item_sum -> args[0]. But the null_value
of such item is reliable only if val_*() has been called on it. So far
arg_is_null() was always used after a call to arg_val*(), so could
rely on null_value; but for COUNT, there is no call to arg_val*(), so
arg_is_null() has to call is_null() instead.
Testcase for 16539979 by Neeraj. Testcase for 17867117 contributed by
Xiaobin Lin from Taobao.
Fix :
-------
Created separate suites called innodb_zip ans i_innodb_zip that contain all compression tests.
Running the new suites with following compression-related parameters :
* innodb_compression_level = {1/9}
* innodb_log_compressed_pages = {ON/OFF}
Problem:-
We have created a table with UTF8_BIN collation.
In case, when in our query we have ORDER BY clause over a function
call we are getting result in incorrect order.
Note:the bug is not there in 5.5.
Analysis:
In 5.5, for UTF16_BIN, we have min and max multi-byte length is 2 and 4
respectively.In make_sortkey(),for 2 byte character character we are
assuming that the resultant length will be 2 byte/character. But when we
use my_strnxfrm_unicode_full_bin(), we store sorting weights using 3 bytes
per character.This result in truncated result.
Same thing happen for UTF8MB4, where we have 1 byte min multi-byte and
4 byte max multi-byte.We will accsume resultant data as 1 byte/character,
which result in truncated result.
Solution:-
use strnxfrm(means use of MY_CS_STRNXFRM macro) is used for sort, in
which the resultant length is not dependent on source length.
This worklog aims at testing the two following scenarios:
1) Whenever the mysql_binlog_send method (dump thread)
reaches the end of file when reading events from the binlog, before
checking if it should wait for more events, there was a test to
check if the file being read was still active, i.e, it was the last
known binlog. However, it was possible that something was written to
the binary log and then a rotation would happen, after EOF was
detected and before the check for active was performed. In this
case, the end of the binary log would not be read by the dump
thread, and this would cause the slave to lose updates.
This test verifies that the problem has been fixed. It waits during
this window while forcing a rotation in the binlog.
2) Verify dump thread can send events in active file, correctly after
encountering an IO error.
INDEX_READ_MAP HAD NO MATCH
If index_read_map is called for exact search and no matching records
exists it will position the cursor on the next record, but still having the
relative position to BTR_PCUR_ON.
This will make a call for index_next to read yet another next record,
instead of returning the record the cursor points to.
Fixed by setting pcur->rel_pos = BTR_PCUR_BEFORE if an exact
[prefix] search is done, but failed.
Also avoids optimistic restoration if rel_pos != BTR_PCUR_ON,
since btr_cur may be different than old_rec.
rb#3324, approved by Marko and Jimmy
DURING INNODB RECOVERY
Problem:
=======
The connection 'master' is dropped by mysqltest after
rpl_end.inc. At this point, dropping temporary tables
at the connection 'master' are not synced at slave.
So, the temporary tables replicated from master remain
on slave leading to an inconsistent close of the test.
The following test thus complains about the presence of
temporary table(s) left over from the previous test.
Fix:
===
- Put explicit drop commands in replication tests so
that the temporary tables are dropped at slave as well.
- Added the check for Slave_open_temp_tables in
mtr_check.sql to warn about the remaining temporary
table, if any, at the close of a test.
IT IS DONE IN-PLACE
With change buffer enabled, InnoDB doesn't write a transaction log
record when it merges a record from the insert buffer to an secondary
index page if the insertion is performed as an update-in-place.
Fixed by logging the 'update-in-place' operation on secondary index
pages.
Approved by Marko. rb#2429
THAN LOCALHOST
This is a test bug and the explanation for the behaviour can be found
on the bug page.Modifying the select to select user where user!=root for the line where
failure is encountered on machines with no hostname other than the localhost.
"SHOW PROCESSLIST"
Analysis:
----------
The problem here is, if one connection changes its
default db and at the same time another connection executes
"SHOW PROCESSLIST", when it wants to read db of the another
connection then there is a chance of accessing the invalid
memory.
The db name stored in THD is not guarded while changing user
DB and while reading the user DB in "SHOW PROCESSLIST".
So, if THD.db is freed by thd "owner" thread and if another
thread executing "SHOW PROCESSLIST" statement tries to read
and copy THD.db at the same time then we may endup in the issue
reported here.
Fix:
----------
Used mutex "LOCK_thd_data" to guard THD.db while freeing it
and while copying it to processlist.
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
IN TIME RECOVERY FAILURE ON SLAVES
Problem:
DROP TEMP TABLE IF EXISTS commands can cause point
in time recovery (re-applying binlog) failures.
Analyses:
In RBR, 'DROP TEMPORARY TABLE' commands are
always binlogged by adding 'IF EXISTS' clauses.
Also, the slave SQL thread will not check replicate.* filter
rules for "DROP TEMPORARY TABLE IF EXISTS" queries.
If log-slave-updates is enabled on slave, these queries
will be binlogged in the format of "USE `db`;
DROP TEMPORARY TABLE IF EXISTS `t1`;" irrespective
of filtering rules and irrespective of the `db` existence.
When users try to recover slave from it's own binlog,
use `db` command might fail if `db` is not present on slave.
Fix:
At the time of writing the 'DROP TEMPORARY TABLE
IF EXISTS' query into the binlog, 'use `db`' will not be
present and the table name in the query will be a fully
qualified table name.
Eg:
'USE `db`; DROP TEMPORARY TABLE IF EXISTS `t1`;'
will be logged as
'DROP TEMPORARY TABLE IF EXISTS `db`.`t1`;'.
Problem:
sys_vars.rpl_init_slave_func test was failing sporadically
on 5.5+.
Fix:
Added assert condition after wait for checks.
Recorded test and enabled it.
BUG#12535301- SYS_VARS.RPL_INIT_SLAVE_FUNC MISMATCHES IN DAILY-5.5
Problem:
sys_vars.rpl_init_slave_func test was not recorded after
the last edit. It was disabled on 5.1 after seeing failures
due to the above reason.
No old failures as this suite never ran with pb2 on 5.1
Fix:
Added assert condition after wait for checks.
Recorded test and enabled it.
TO INCONSISTENCY
PROBLEM
--------
When we drop a partitoned table , we first gather the
information about partitions in the table from the
table_name.par file and store it in an internal data
structure.Then we delete this file and the data in
the table. If the server crashes after deleting the
file,then after recovering we cannot access the table
.Even we cannot drop the table ,because drop algorithm
requires par file to read the partition information.
FIX
---
1. We move the part of deleting par file after deleting
all the table data from the storage egine.
2. During drop operation if we detect that the par
file is missing then we delete the .frm file,since
there is no way of recovering without par file.
[Approved by Mattias rb#2576 ]
BY BINLOG_KILLED_SIMULATE.TEST
'mysqbinlog' tool creates a temporary file while
preparing LOAD DATA QUERY. These files needs to be deleted
at the end of the test script otherwise these files are
left out in the daily-run machines, causing
"no space on device issues"
Fix:
Delete them at the end of these test scripts
1) execute mysqlbinlog with --local-load option to
create these files in a specified tmpdir
2) delete the tmpdir at the end of the test script
USING THE PLUGIN INTERFACE.
ISSUE: No support for floating-point plugin
system variables.
SOLUTION: Allowing plugins to define and expose floating-point
system variables of type double. MYSQL_SYSVAR_DOUBLE
and MYSQL_THDVAR_DOUBLE are added.
ISSUE: Fractional part of the def, min, max values of system
variables are ignored.
SOLUTION: Adding functions that are used to store the raw
representation of a double in the raw bits of unsigned
longlong in a way that the binary representation
remains the same.
