Restricted output for CREATE USER, GRANT, REVOKE and SET PASSWORD
so that it shows only above keywords but not rest of query i.e.
not user or password.
These test can sporadically show mutex deadlock warnings between LOCK_wsrep_thd
and LOCK_thd_data mutexes. This means that these mutexes can be locked in opposite
order by different threads, and thus result in deadlock situation.
To fix such issue, the locking policy of these mutexes should be revised and
enforced to be uniform. However, a quick code review shows that the number of
lock/unlock operations for these mutexes combined is between 100-200, and all these
mutex invocations should be checked/fixed.
On the other hand, it turns out that LOCK_wsrep_thd is used for protecting access to
wsrep variables of THD (wsrep_conflict_state, wsrep_query_state), whereas LOCK_thd_data
protects query, db and mysys_var variables in THD. Extending LOCK_thd_data to protect
also wsrep variables looks like a viable solution, as there should not be a use case
where separate threads need simultaneous access to wsrep variables and THD data variables.
In this commit LOCK_wsrep_thd mutex is refactored to be replaced by LOCK_thd_data.
By bluntly replacing LOCK_wsrep_thd by LOCK_thd_data, will result in double locking
of LOCK_thd_data, and some adjustements have been performed to fix such situations.
fix galera.galera_sst_mysqldump test to work:
* must connect to 127.0.0.1, where mysqld is listening
* disable wsrep_sync_wait in wsrep_sst_mysqldump, otherwise
sst can deadlock
* allow 127.0.0.1 for bind_address and wsrep_sst_receive_address.
(it's useful in tests, or when two nodes are on the same box,
or when nodes are on different boxes, but the connection is
tunelled, or whatever. Don't judge user's setup). MDEV-14070
* don't wait for client connections to die when doing
mysqldump sst. they'll die in a due time, and if needed mysql
will wait on locks until they do. MDEV-14069
Also don't mark it big, to make sure it's sufficiently tested
This test failed to work properly because the fixes it came
with were not merged from upstream.
The test would fail with a spurious ER_LOCK_DEADLOCK error
for a conflict that happened earlier in the test execution,
while wsrep is disabled.
The original fix was to set THD::wsrep_conflict_state only
if wsrep is enabled (see wsrep_thd_set_conflict_state() in
sql/wsrep_mysqld.cc)
Problem:- Gtid are not transferred in Galera Cluster.
Solution:- We need to transfer gtid in the case on either when cluster is
slave/master in async replication. In normal Gtid replication gtid are generated on
recieving node itself and it is always on sync with other nodes. Because galera keeps
node in sync , So all nodes get same no of event groups. So the issue arises when
say galera is slave in async replication.
A
| (Async replication)
D <-> E <-> F {Galera replication}
So what should happen is that all node should apply the master gtid but this does
node happen, becuase node E, F does not recieve gtid from D in write set , So what E(or F)
does is that it applies wsrep_gtid_domain_id, D server-id , E gtid next seq no. This
generated gtid does not always work when say A has different domain id.
So In this commit, on galera node when we see that this event is recieved from master
we simply write Gtid_Log_Event in write_set and send it to other nodes.
Problem:- This crash happens because of thd = NULL , and while checking
for wsrep_on , we no longer check for thd != NULL (MDEV-7955). So this
problem is regression of MDEV-7955. However this patch not only solves
this regression , It solves all regression caused by MDEV-7955 patch.
To get all possible cases when thd can be null , assert(thd)/
assert(trx->mysql_thd) is place just before all wsrep_on and innodb test
suite is run. And the assert which caused failure are removed with a physical
check for thd != NULL. Rest assert are removed. Hopefully this method will
remove all current/potential regression of MDEV-7955.
wsrep_drop_table_query(): Remove the definition of this ununsed function.
row_upd_sec_index_entry(), row_upd_clust_rec_by_insert():
Evaluate the simplest conditions first. The merge could have slightly
hurt performance by causing extra calls to wsrep_on().
Merged from mysql-wsrep-bugs following:
GCF-1058 MTR test galera.MW-86 fails on repeated runs
Wait for the sync point sync.wsrep_apply_cb to be reached before
executing the test and clearing the debug flag sync.wsrep_apply_cb.
The race scenario:
Intended behavior:
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
node2 (background): consume the signal
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - ok
What happens occasionally (unexpected):
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
// The background INSERT still has _not_ reached the place where it starts
// waiting for the signal:
// DBUG_EXECUTE_IF("sync.wsrep_apply_cb", "now wait_for...");
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
// The background INSERT reaches DBUG_EXECUTE_IF("sync.wsrep_apply_cb", ...)
// but sync.wsrep_apply_cb has already been cleared and the "wait" code is not
// executed. The signal remains unconsumed.
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - failure, signal.wsrep_apply_cb is
pending (not consumed)
Remove MW-360 test case as it is not intended for MariaDB (uses
MySQL GTID).
In summary, wsrep_node_address and wsrep_sst_receive_address can now
be set to IPv6 addresses escaped by []. Rsync SST works out ouf the
box thanks to rsync daemon listening on both IPv4 and IPv6 sockets by
default. For xtrabackup SST onver IPv6 one needs to set sockopt in
the [sst] section of joiner's configuration file to ",pf=ip6" if
using socat as a streamer or to "-6" if using netcat.
The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
Tasks:-
Changes in wsrep_dirty_reads variable
1.) Global + Session scope (Current: session-only)
2.) Can be set using command line.
3.) Allow all commands that do not change data (besides SELECT)
4.) Allow prepared Statements that do not change data
5.) Works with wsrep_sync_wait enabled
Tasks:-
Changes in wsrep_dirty_reads variable
1.) Global + Session scope (Current: session-only)
2.) Can be set using command line.
3.) Allow all commands that do not change data (besides SELECT)
4.) Allow prepared Statements that do not change data
5.) Works with wsrep_sync_wait enabled
Tasks:-
Changes in wsrep_dirty_reads variable
1.) Global + Session scope (Current: session-only)
2.) Can be set using command line.
3.) Allow all commands that do not change data (besides SELECT)
4.) Allow prepared Statements that do not change data
5.) Works with wsrep_sync_wait enabled
In galera cluster, the definer (and thus binlog invoker) must be set
for CREATE ROLE before Query_log_event is created during TOI on the
originating node.
- changed the condition when to do implicit desync as part of FTWRL to
cover only case when node is PC and synced. Donor node has alreaydy desycned
and other states mean that node is not in cluster, so desync is not even possible.
- reverted from tracking donor servicing thread. With xtrabackup SST,
xtrabackup thread will call FTWRL and node is desynced upfront
- Skipping desync in FTWRL if node is operating as donor
Since wsrep_sync_wait & wsrep_causal_reads variables are related,
they are always kept in sync whenever one of them changes.
Same is tried on server start, where wsrep_sync_wait get updated
based on wsrep_causal_reads' value. But, since wsrep_causal_reads
is OFF by default, wsrep_sync_wait's value gets modified and loses
its WSREP_SYNC_WAIT_BEFORE_READ bit.
Fixed by syncing wsrep_sync_wait & wsrep_causal_reads values
individually on server start in mysqld_get_one_option() based
on command line arguments used.
On wsrep_cluster_address update, node restarts the replication
and attempts to connect to the new address. In this process it
makes a call to wsrep provider's connect API, which could lead
to segfault if wsrep provider is not loaded (wsrep_on=OFF).
Fixed by making sure that it proceeds only if a provider is
loaded.
- Fixes query cache so that it is aware of wsrep_sync_wait.
Query cache would return (possibly stale) results to the
client, regardless of the value of wsrep_sync_wait.
- Includes the test case that reproduced the issue.
Limit binlog recovery so that the wsrep position found from
storage engines is not exceeded. This is required to have consistent
position between wsrep position stored in innodb header and
recoverd binlog.
- Fixes query cache so that it is aware of wsrep_sync_wait.
Query cache would return (possibly stale) results to the
client, regardless of the value of wsrep_sync_wait.
- Includes the test case that reproduced the issue.
different fix. remove old ones, wait for THD to be fully
initialized before continuing with the server startup process.
This reverts commits db2e21b, 13615c5, 3f515a0, 70113ee.
