------------------------------------------------------------
revno: 2597.42.4
committer: davi@mysql.com/endora.local
timestamp: Tue 2008-04-15 17:29:42 -0300
message:
Bug#36004 mysql_stmt_prepare resets the list of warnings
Although the manual says that "the list of messages is reset
for each new statement that uses a table", the list of messages
is being unconditionally reset for prepare commands.
The solution is to enforce that the prepare command will only
reset the message list if the statement being prepared uses
a table or a warning is pushed.
tests/mysql_client_test.c:
Add test case for Bug#36004
The reason for the bug is that mysqtest as well as other client tools
running in test suite (mysqlbinlog, mysqldump) will first try to connect
whatever database has created shared memory with default base name
"MySQL" and use this. (Same effect could be seen on Unix if mtr would
not care to calculate "port" and "socket" parameter).
The fix ensures that all client tools and running in mtr use unique
per-database shared memory base parameters, so there is no possibility
to clash with already installed one. We use socket name for shared memory
base (it's known to be unique). This shared-memory-base is written to the
MTR config file to the [client] and [mysqld] sections. Fix made also made
sure all client tools understand and correctly handle --shared-memory-base.
Prior to this patch it was not the case for mysqltest, mysqlbinlog and
mysql_client_test.
All new connections done from mtr scripts via connect() will by default
set shared-memory-base. And finally, there is a possibility to force
shared memory or pipe connection and overwrite shared memory/pipe base name
from within mtr scripts via optional PIPE or SHM modifier. This functionality
was manually backported from 6.0
(original patch http://lists.mysql.com/commits/74749)
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
----------------------------------------------------------
revno: 2630.2.6
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-27430
timestamp: Mon 2008-05-26 16:12:28 +0400
message:
Cover four special cases of WL#4166 with tests:
- when the query cache is disabled at the time of prepared statement
reprepare
- when long data parameters are used
- when character_set_connection != character_set_client, and a parameter
conversion takes place
- when parameter data is out of acceptable range, e.g. year 10000 is
supplied as part of MYSQL_TYPE_DATETIME value. The server is supposed
to warn in such case.
mysql-test/include/query_cache_sql_prepare.inc:
Addditional test for Bug#27430
mysql-test/r/query_cache_ps_no_prot.result:
Update result file.
mysql-test/r/query_cache_ps_ps_prot.result:
Update result file.
tests/mysql_client_test.c:
Add more tests (Bug#27430 and WL#4166).
Fix test_datetime_range() test to correctly assert for the number
of warnings. Additionally, print these warnings out.
given an already connected MYSQL handle
mysql_real_connect() did not check whether the MYSQL connection
handler was already connected and connected again even if so.
Now a CR_ALREADY_CONNECTED error is returned.
2677 Vladislav Vaintroub 2008-11-04
CMakeLists.txt files cleanup
- remove SAFEMALLOC and SAFE_MUTEX definitions that were
present in *each* CMakeLists.txt. Instead, put them into top level
CMakeLists.txt, but disable on Windows, because
a) SAFEMALLOC does not add any functionality that is not already
present in Debug C runtime ( and 2 safe malloc one on top of the other
only unnecessarily slows down the server)
b)SAFE_MUTEX does not work on Windows and have been
explicitely disabled on Windows with #undef previously. Fortunately,
ntdll does pretty good job identifying l problems with
CRITICAL_SECTIONs.
DebugBreak()s on using uninited critical section, unlocking unowned
critical section)
-Also, remove occationally used -D_DEBUG (added by compiler
anyway)
sql/udf_example.c:
use unixish end of line
http://lists.mysql.com/commits/57725
Vladislav Vaintroub 2008-11-03
Cleanup CMakeLists.txt(s) - remove winsock2 (ws2_32) from
TARGET_LINK_LIBRARIES.
Every exe or dll linked with mysys needs ws2_32, because
mysys uses winsock function WSAStartup in my_init().
However, there is no need to explicitely add ws2_32 to
the list of TARGET_LINK_LIBRARIES multiple times.
Visual Studio comes with a handy pragma that tells linker
to add library. So patch replaces bunch of ws2_32 in
CMakeLists with single pragma comment(lib,"ws2_32")
in my_init.c
Additionally, reference to non-existing "debug" library
has been removed from TARGET_LINK_LIBRARIES. The correct
name of the library is "dbug".
htttp://lists.mysql.com/commits/50957?f=plain
Always use TLS functions instead of __declspec(thread) to access
thread local storage variables.
The change removes the necessity to recomplile the same source
files twice - with USE_TLS for DLLs and without USE_TLS for EXEs.
Real benefit of this change is better readability and maintainability
of TLS functions within MySQL.
There is a performance loss using TlsXXX functions compared to __declspec
but the difference is negligible in practice. In a sysbench-like benchmark
I ran with with TlsGetValue, pthread_[get|set]_specific was called 600000000
times and took 0.17sec of total 35min CPU time, or 0.008%.
client/mysql.cc:
Remove leading whitespace.
Remove extra text after #else directive.
client/mysqldump.c:
Function does not take a parameter.
mysys/array.c:
buffer is a uchar pointer.
sql/item.cc:
Assert if it should not happen.
storage/myisam/mi_check.c:
Cast to expected type. This is probably a bug, but it is
casted in a similar way in another part of the code.
storage/ndb/include/mgmapi/ndb_logevent.h:
Apply fix from cluster team.
tests/mysql_client_test.c:
Remove extraneous slash.
The problem is that the lexer could inadvertently skip over the
end of a query being parsed if it encountered a malformed multibyte
character. A specially crated query string could cause the lexer
to jump up to six bytes past the end of the query buffer. Another
problem was that the laxer could use unfiltered user input as
a signed array index for the parser maps (having upper and lower
bounds 0 and 256 respectively).
The solution is to ensure that the lexer only skips over well-formed
multibyte characters and that the index value of the parser maps
is always a unsigned value.
mysql-test/r/ctype_recoding.result:
Update test case result: ending backtick is not skipped over anymore.
sql/sql_lex.cc:
Characters being analyzed must be unsigned as they can be
used as indexes for the parser maps. Only skip over if the
string is a valid multi-byte sequence.
tests/mysql_client_test.c:
Add test case for Bug#45010
Post-merge fix: test case could fail due to a conversion of the
max_join_size value to a integer. Fixed by preserving the value
as a string for comparison purposes.
tests/mysql_client_test.c:
Preserve max_join_size value as a string instead of converting
it to a integer -- value can be larger then the type used.
unnecessarily
The problem is that libmysqlclient.so is built with THREAD
undefined, while a client compiling against the same header
files will see THREAD as defined and definitions in
my_pthread.h will be included, possibly resulting in undefined
symbols that cannot be resolved with libmysqlclient.so.
The suggested solution is to require that clients wanting to
link with libmysqlclient.so should be built with
MYSQL_CLIENT_NO_THREADS defined. This requires a documentation
change, and more details for this will be supplied if this
patch is approved.
The MYSQL_CLIENT_NO_THREADS define was renamed from
UNDEF_THREADS_HACK, to get a more suitable (less suspicious)
name for the define. (The UNDEF_THREADS_HACK is retained for
backwards compatibility, though.)
This patch is also in anticipation of WL#4958, which will
remove this problem altogether by dropping the building of
libmysqlclient.
enabled message storing into error message list
for 'drop table' command
mysql-test/r/warnings.result:
test result
mysql-test/t/warnings.test:
test case
sql/sql_table.cc:
We should skip error sending then we should return
warnings to client as some functions may send its
own errors, so we should set no_warnings_for_error= 0
only in case of warning.
The fix is to enable message storing into error message
list for 'drop table' command(only for error case).
tests/mysql_client_test.c:
test fix
without proper formatting
The problem is that a suitably crafted database identifier
supplied to COM_CREATE_DB or COM_DROP_DB can cause a SIGSEGV,
and thereby a denial of service. The database name is printed
to the log without using a format string, so potential
attackers can control the behavior of my_b_vprintf() by
supplying their own format string. A CREATE or DROP privilege
would be required.
This patch supplies a format string to the printing of the
database name. A test case is added to mysql_client_test.
sql/sql_parse.cc:
Added format strings.
tests/mysql_client_test.c:
Added new test case.
per-file comments:
tests/mysql_client_test.c
the test for bug 37956 isn't relevant anymore.
The query there 'select point(?,?)' doesn't produce an error.
This is a back port from 5.1 to 5.0.
Fix for BUG 20023: mysql_change_user() resets the value
of SQL_BIG_SELECTS.
The bug was that SQL_BIG_SELECTS was not properly set
in COM_CHANGE_USER.
The fix is to update SQL_BIG_SELECTS properly.
sql/sql_class.cc:
Update THD::options with the respect to SQL_BIG_SELECTS
in COM_CHANGE_USER.
tests/mysql_client_test.c:
Add a test case BUG#20023.
*with --with-charset=utf8*
Problem: wrong LONG TEXT field length is sent to a client
when multibyte server character set used.
Fix: always limit field length sent to a client to 2^32,
as we store it in 4 byte slot.
Note: mysql_client_test changed accordingly.
sql/protocol.cc:
Fix for bug#19829:make test Failed in mysql_client_test
*with --with-charset=utf8*
- limit field length sent to client to UINT_MAX32 as
it may exceeds 32 bit slot for LONG TEXT fields if
thd_charset->mbmaxlen > 1.
tests/mysql_client_test.c:
Fix for bug#19829:make test Failed in mysql_client_test
*with --with-charset=utf8*
- checking field members have in mind that field length
is limited to UINT_MAX32.
returns short string value.
Multibyte character sets were not taken into account when
calculating max_length in Item_param::convert_str_value(). As a
result, string parameters of a prepared statement could be
truncated later when calculating string length in characters by
dividing length in bytes by the charset's mbmaxlen value (e.g. in
Field_varstring::store()).
Fixed by taking charset's mbmaxlen into account when calculating
max_length in Item_param::convert_str_value().
sql/item.cc:
Multiply string's length in characters by charset's mbmaxlen when
calculating max_length.
tests/mysql_client_test.c:
Added a test case for bug #41078.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
The problem is that the query cache stores packets containing
the server status of the time when the cached statement was run.
This might lead to a wrong transaction status in the client side
if a statement is cached during a transaction and is later served
outside a transaction context (and vice-versa).
The solution is to take into account the transaction status when
storing in and serving from the query cache.
mysql-test/r/innodb_cache.result:
Update test case result.
mysql-test/r/query_cache.result:
Add test case result for Bug#36326
mysql-test/t/query_cache.test:
Add test case for Bug#36326
sql/mysql_priv.h:
Add new flags.
sql/sql_cache.cc:
Remember the transaction and autocommit status stored in the packet.
tests/mysql_client_test.c:
Add test case for Bug#36326
