Bug #27417 thd->no_trans_update.stmt lost value inside of SF-exec-stack
Once had been set the flag might later got reset inside of a stored routine
execution stack.
The reason was in that there was no check if a new statement started at time
of resetting.
The artifact affects most of binlogable DML queries. Notice, that multi-update
is wrapped up within
bug@27716 fix, multi-delete bug@29136.
Fixed with saving parent's statement flag of whether the statement modified
non-transactional table, and unioning (merging) the value with that was gained
in mysql_execute_command.
Resettling thd->no_trans_update members into thd->transaction.`member`;
Asserting code;
Effectively the following properties are held.
1. At the end of a substatement thd->transaction.stmt.modified_non_trans_table
reflects the fact if such a table got modified by the substatement.
That also respects THD::really_abort_on_warnin() requirements.
2. Eventually thd->transaction.stmt.modified_non_trans_table will be computed as
the union of the values of all invoked sub-statements.
That fixes this bug#27417;
Computing of thd->transaction.all.modified_non_trans_table is refined to base to
the stmt's value for all the case including insert .. select statement which
before the patch had an extra issue bug@28960.
Minor issues are covered with mysql_load, mysql_delete, and binloggin of insert in
to temp_table select.
The supplied test verifies limitely, mostly asserts. The ultimate testing is defered
for bug@13270, bug@23333.
Implementation of mysql_multi_update did not call multi_update::send_error method in some cases
(see the test reported on bug page and test cases in changeset).
Fixed with deploying the method, ::send_error() is refined to get binlogging code which works whenever
there is modified non-transactional table.
thd->no_trans_update.stmt flag is set in to TRUE to ease testing though being the beginning of relative
bug#27417 fix (addresses a part of those issues).
Eliminating two minor issues (small bugs) in multi_update methods.
This patch for multi-update also addresses a part of the issues reported in bug#13270,bug#23333.
The result of the CHECK OPTION condition evaluation over an
updated record and records of merged tables was arbitrary and
dependant on the order of records in the merged tables during
the execution of SELECT statement.
The CHECK OPTION expression was evaluated over expired record
buffers (with arbitrary data in the fields).
Rowids of tables used in the CHECK OPTION expression were
added to temporary table rows. The multi_update::do_updates()
method was modified to restore necessary record buffers
before evaluation of the CHECK OPTION condition.
The reason for the bug was that replaying of a query on slave could not be possible since its event
was recorded with the killed error. Due to the specific of handling INSERT, which per-row-while-loop is
unbreakable to killing, the query on transactional table should have not appeared in binlog unless
there was a call to a stored routine that got interrupted with killing (and then there must be an error
returned out of the loop).
The offered solution added the following rule for binlogging of INSERT that accounts the above
specifics:
For INSERT on transactional-table if the error was not set the only raised flag
is harmless and is ignored via masking out on time of creation of binlog event.
For both table types the combination of raised error and KILLED flag indicates that there
was potentially partial execution on master and consistency is under the question.
In that case the code continues to binlog an event with an appropriate killed error.
The fix relies on the specified behaviour of stored routine that must propagate the error
to the top level query handling if the thd->killed flag was raised in the routine execution.
The patch adds an arg with the default killed-status-unset value to Query_log_event::Query_log_event.
database.
If a user has a right to update anything in the current database then the
access was granted and further checks of access rights for underlying tables
wasn't done correctly. The check is done before a view is opened and thus no
check of access rights for underlying tables can be carried out.
This allows a user to update through a view a table from another database for
which he hasn't enough rights.
Now the mysql_update() and the mysql_test_update() functions are forces
re-checking of access rights after a view is opened.
In multi_update::send_data(), the counter of matched rows was not correctly incremented, when during insertion of a new row to a temporay table it had to be converted from HEAP to MyISAM.
This fix changes the logic to increment the counter of matched rows in the following cases:
1. If the error returned from write_row() is zero.
2. If the error returned from write_row() is non-zero, is neither HA_ERR_FOUND_DUPP_KEY nor HA_ERR_FOUND_DUPP_UNIQUE, and a call to create_myisam_from_heap() succeeds.
In certain cases AFTER UPDATE/DELETE triggers on NDB tables that referenced
subject table didn't see the results of operation which caused invocation
of those triggers. In other words AFTER trigger invoked as result of update
(or deletion) of particular row saw version of this row before update (or
deletion).
The problem occured because NDB handler in those cases postponed actual
update/delete operations to be able to perform them later as one batch.
This fix solves the problem by disabling this optimization for particular
operation if subject table has AFTER trigger for this operation defined.
To achieve this we introduce two new flags for handler::extra() method:
HA_EXTRA_DELETE_CANNOT_BATCH and HA_EXTRA_UPDATE_CANNOT_BATCH.
These are called if there exists AFTER DELETE/UPDATE triggers during a
statement that potentially can generate calls to delete_row()/update_row().
This includes multi_delete/multi_update statements as well as insert statements
that do delete/update as part of an ON DUPLICATE statement.
thd->options' OPTION_STATUS_NO_TRANS_UPDATE bit was not restored at the end of SF() invocation, where
SF() modified non-ta table.
As the result of this artifact it was not possible to detect whether there were any side-effects when
top-level query ends.
If the top level query table was not modified and the bit is lost there would be no binlogging.
Fixed with preserving the bit inside of thd->no_trans_update struct. The struct agregates two bool flags
telling whether the current query and the current transaction modified any non-ta table.
The flags stmt, all are dropped at the end of the query and the transaction.
Bug 18914 (Calling certain SPs from triggers fail)
Bug 20713 (Functions will not not continue for SQLSTATE VALUE '42S02')
Bug 21825 (Incorrect message error deleting records in a table with a
trigger for inserting)
Bug 22580 (DROP TABLE in nested stored procedure causes strange dependency
error)
Bug 25345 (Cursors from Functions)
This fix resolves a long standing issue originally reported with bug 8407,
which affect the behavior of Stored Procedures, Stored Functions and Trigger
in many different ways, causing symptoms reported by all the bugs listed.
In all cases, the root cause of the problem traces back to 8407 and how the
server locks tables involved with sub statements.
Prior to this fix, the implementation of stored routines would:
- compute the transitive closure of all the tables referenced by a top level
statement
- open and lock all the tables involved
- execute the top level statement
"transitive closure of tables" means collecting:
- all the tables,
- all the stored functions,
- all the views,
- all the table triggers
- all the stored procedures
involved, and recursively inspect these objects definition to find more
references to more objects, until the list of every object referenced does
not grow any more.
This mechanism is known as "pre-locking" tables before execution.
The motivation for locking all the tables (possibly) used at once is to
prevent dead locks.
One problem with this approach is that, if the execution path the code
really takes during runtime does not use a given table, and if the table is
missing, the server would not execute the statement.
This in particular has a major impact on triggers, since a missing table
referenced by an update/delete trigger would prevent an insert trigger to run.
Another problem is that stored routines might define SQL exception handlers
to deal with missing tables, but the server implementation would never give
user code a chance to execute this logic, since the routine is never
executed when a missing table cause the pre-locking code to fail.
With this fix, the internal implementation of the pre-locking code has been
relaxed of some constraints, so that failure to open a table does not
necessarily prevent execution of a stored routine.
In particular, the pre-locking mechanism is now behaving as follows:
1) the first step, to compute the transitive closure of all the tables
possibly referenced by a statement, is unchanged.
2) the next step, which is to open all the tables involved, only attempts
to open the tables added by the pre-locking code, but silently fails without
reporting any error or invoking any exception handler is the table is not
present. This is achieved by trapping internal errors with
Prelock_error_handler
3) the locking step only locks tables that were successfully opened.
4) when executing sub statements, the list of tables used by each statements
is evaluated as before. The tables needed by the sub statement are expected
to be already opened and locked. Statement referencing tables that were not
opened in step 2) will fail to find the table in the open list, and only at
this point will execution of the user code fail.
5) when a runtime exception is raised at 4), the instruction continuation
destination (the next instruction to execute in case of SQL continue
handlers) is evaluated.
This is achieved with sp_instr::exec_open_and_lock_tables()
6) if a user exception handler is present in the stored routine, that
handler is invoked as usual, so that ER_NO_SUCH_TABLE exceptions can be
trapped by stored routines. If no handler exists, then the runtime execution
will fail as expected.
With all these changes, a side effect is that view security is impacted, in
two different ways.
First, a view defined as "select stored_function()", where the stored
function references a table that may not exist, is considered valid.
The rationale is that, because the stored function might trap exceptions
during execution and still return a valid result, there is no way to decide
when the view is created if a missing table really cause the view to be invalid.
Secondly, testing for existence of tables is now done later during
execution. View security, which consist of trapping errors and return a
generic ER_VIEW_INVALID (to prevent disclosing information) was only
implemented at very specific phases covering *opening* tables, but not
covering the runtime execution. Because of this existing limitation,
errors that were previously trapped and converted into ER_VIEW_INVALID are
not trapped, causing table names to be reported to the user.
This change is exposing an existing problem, which is independent and will
be resolved separately.
When INSERT is done over a view the table being inserted into is
checked to be unique among all views tables. But if the view contains
self-joined table an error will be thrown even if all tables are used under
different aliases.
The unique_table() function now also checks tables' aliases when needed.
created for sorting.
Any outer reference in a subquery was represented by an Item_field object.
If the outer select employs a temporary table all such fields should be
replaced with fields from that temporary table in order to point to the
actual data. This replacement wasn't done and that resulted in a wrong
subquery evaluation and a wrong result of the whole query.
Now any outer field is represented by two objects - Item_field placed in the
outer select and Item_outer_ref in the subquery. Item_field object is
processed as a normal field and the reference to it is saved in the
ref_pointer_array. Thus the Item_outer_ref is always references the correct
field. The original field is substituted for a reference in the
Item_field::fix_outer_field() function.
New function called fix_inner_refs() is added to fix fields referenced from
inner selects and to fix references (Item_ref objects) to these fields.
The new Item_outer_ref class is a descendant of the Item_direct_ref class.
It additionally stores a reference to the original field and designed to
behave more like a field.
View check option clauses were ignored for updates of multi-table
views when the updates could not be performed on fly and the rows
to update had to be put into temporary tables first.
updated.
INSERT ... ON DUPLICATE KEY UPDATE reports that a record was updated when
the duplicate key occurs even if the record wasn't actually changed
because the update values are the same as those in the record.
Now the compare_record() function is used to check whether the record was
changed and the update of a record reported only if the record differs
from the original one.
After fix for bug#21798 JOIN stores the pointer to the buffer for sorting
fields. It is used while sorting for grouping and for ordering. If ORDER BY
clause has more elements then the GROUP BY clause then a memory overrun occurs.
Now the length of the ORDER BY list is always passed to the
make_unireg_sortorder() function and it allocates buffer big enough to be
used for bigger list.
Corrected spelling in copyright text
Makefile.am:
Don't update the files from BitKeeper
Many files:
Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
Adjusted year(s) in copyright header
Many files:
Added GPL copyright text
Removed files:
Docs/Support/colspec-fix.pl
Docs/Support/docbook-fixup.pl
Docs/Support/docbook-prefix.pl
Docs/Support/docbook-split
Docs/Support/make-docbook
Docs/Support/make-makefile
Docs/Support/test-make-manual
Docs/Support/test-make-manual-de
Docs/Support/xwf
An update that used a join of a table to itself and modified the
table on one side of the join reported the table as crashed or
updated wrong rows.
Fixed by creating temporary table for self-joined multi update statement.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
Fixed compiler warnings (detected by VC++):
- Removed not used variables
- Added casts
- Fixed wrong assignments to bool
- Fixed wrong calls with bool arguments
- Added missing argument to store(longlong), which caused wrong store method to be called.
(Mostly in DBUG_PRINT() and unused arguments)
Fixed bug in query cache when used with traceing (--with-debug)
Fixed memory leak in mysqldump
Removed warnings from mysqltest scripts (replaced -- with #)
list using a function
When executing dependent subqueries they are re-inited and re-exec() for
each row of the outer context.
The cause for the bug is that during subquery reinitialization/re-execution,
the optimizer reallocates JOIN::join_tab, JOIN::table in make_simple_join()
and the local variable in 'sortorder' in create_sort_index(), which is
allocated by make_unireg_sortorder().
Care must be taken not to allocate anything into the thread's memory pool
while re-initializing query plan structures between subquery re-executions.
All such items mush be cached and reused because the thread's memory pool
is freed at the end of the whole query.
Note that they must be cached and reused even for queries that are not
otherwise cacheable because otherwise it will grow the thread's memory
pool every time a cacheable query is re-executed.
We provide additional members to the JOIN structure to store references
to the items that need to be cached.
Note: bug#21726 does not directly apply to 4.1, as it doesn't have stored
procedures. However, 4.1 had some bugs that were fixed in 5.0 by the
patch for bug#21726, and this patch is a backport of those fixes.
Namely, in 4.1 it fixes:
- LAST_INSERT_ID(expr) didn't return value of expr (4.1 specific).
- LAST_INSERT_ID() could return the value generated by current
statement if the call happens after the generation, like in
CREATE TABLE t1 (i INT AUTO_INCREMENT PRIMARY KEY, j INT);
INSERT INTO t1 VALUES (NULL, 0), (NULL, LAST_INSERT_ID());
- Redundant binary log LAST_INSERT_ID_EVENTs could be generated.
Though this is not storage engine specific problem, I was able to
repeat this problem with BDB and NDB engines only. That was the
reason to add a test case into ndb_update.test. As a result
different bad things could happen.
BDB has removed duplicate rows which is not expected.
NDB returns an error.
For multi table update notify storage engine about UPDATE IGNORE
as it is done in single table UPDATE.
Non-upper-level INSERTs (the ones in the body of stored procedure,
stored function, or trigger) into a table that have AUTO_INCREMENT
column didn't affected the result of LAST_INSERT_ID() on this level.
The problem was introduced with the fix of bug 6880, which in turn was
introduced with the fix of bug 3117, where current insert_id value was
remembered on the first call to LAST_INSERT_ID() (bug 3117) and was
returned from that function until it was reset before the next
_upper-level_ statement (bug 6880).
The fix for bug#21726 brings back the behaviour of version 4.0, and
implements the following: remember insert_id value at the beginning
of the statement or expression (which at that point equals to
the first insert_id value generated by the previous statement), and
return that remembered value from LAST_INSERT_ID() or @@LAST_INSERT_ID.
Thus, the value returned by LAST_INSERT_ID() is not affected by values
generated by current statement, nor by LAST_INSERT_ID(expr) calls in
this statement.
Version 5.1 does not have this bug (it was fixed by WL 3146).
