* rename all debugging related command-line options
and variables to start from "debug-", and made them all
OFF by default.
* replace "MySQL" with "MariaDB" in error messages
* "Cast ... converted ... integer to it's ... complement"
is now a note, not a warning
* @@query_cache_strip_comments now has a session scope,
not global.
ALTER TABLE AND/OR PLUGIN/SEMISYNC
If a plugin was uninstalled, thread local values for plugin
variables of string type with PLUGIN_VAR_MEMALLOC flag were
not freed.
With this patch these variables are freed when thread is
done (like all other variables).
sql/sql_class.h:
Added variable which stores memory hunks allocated
for PLUGIN_VAR_MEMALLOC values.
sql/sql_plugin.cc:
Normally all memory allocated for dynamic variables values must
be freed by cleanup_variables().
But if a plugin was uninstalled, descriptors of it's system
variables are lost. Still some memory may be occupied for thread
local values. It is ok for most kinds of variables, as they're
stored on dynamic_variables_ptr and freed when thread is done.
Values for PLUGIN_VAR_MEMALLOC variables are stored separately.
These lost values are handled by plugin_var_memalloc_free().
ALTER TABLE AND/OR PLUGIN/SEMISYNC
If a plugin was uninstalled, thread local values for plugin
variables of string type with PLUGIN_VAR_MEMALLOC flag were
not freed.
With this patch these variables are freed when thread is
done (like all other variables).
The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_log_pos.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_packet.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_rotate_purge_deadlock.result:
new result file is added.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
The test of that bug can't satisfy windows and unix backslash interpretation so windows
execution is chosen to bypass.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock-master.opt:
new opt file is added.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock.test:
regression test is added as well as verification of a
possible side effect of the fixes is tried.
sql/log.cc:
LOCK_log is never taken during execution of log purging routine.
The former MYSQL_BIN_LOG::rotate_and_purge is made to necessarily
acquiring and releasing LOCK_log.
If caller takes the mutex itself it has to use a new rotate(), purge()
methods combination and to never let purge() be run with LOCK_log grabbed.
split apart to allow
the caller to chose either it
Simulation of concurrently rotating/purging threads is added.
sql/log.h:
new rotate(), purge() methods are added to be used instead of
the former rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
rotate_and_purge() signature is changed. Caller should not call rotate_and_purge()
but rather {rotate(), purge()} if LOCK_log is acquired by it.
sql/rpl_injector.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_class.h:
unnecessary constants are removed.
sql/sql_parse.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_reload.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_repl.cc:
followup for bug@11747416: the file name printing is changed to a relative
path instead of just the file name.
The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
For ANY subqueries NULLs should be ignored (if there is other values) when finding max min.
For ALL subqueries NULLs should be saved if they found.
Optimisation for ALL suqbueries if NULL is possible in the SELECT list with max/min aggregate function switched off.
Some test changed where NULL is not used but optimization with max/min aggregate function important so NOT NULL added.
mysql-test/r/explain.result:
Forced old optimization.
mysql-test/r/subselect.result:
Forced old optimization.
New test suite.
mysql-test/t/explain.test:
Forced old optimization.
mysql-test/t/subselect.test:
Forced old optimization.
New test suite.
sql/item_subselect.cc:
Store converted subquery type.
Switch off aggregate function optimisation for ALL and nulls.
sql/sql_class.cc:
Fixed NULL comparison.
sql/sql_class.h:
Store converted subquery type.
sql/mysqld.cc:
Log errors if thd->log_all_errors is set
sql/sql_class.cc:
Add log_all_errors
sql/sql_class.h:
Add log_all_errors
storage/myisam/ha_myisam.cc:
Write db and table name for all logged errors
Log errors also during auto_recovery
During auto_recovery, set thd->log_all_errors if log_warnings >2 to ensure that system errors are also logged to file
- The problem was that the code that made the check whether the subquery is an AND-part of the WHERE
clause didn't work correctly for nested subqueries. In particular, grand-child subquery in HAVING was
treated as if it was in the WHERE, which eventually caused an assert when replace_where_subcondition
looked for the subquery predicate in the WHERE and couldn't find it there.
- The fix: Removed implementation of "thd_marker approach". thd->thd_marker was used to determine the
location of subquery predicate: setup_conds() would set accordingly it when making the
{where|on_expr}->fix_fields(...)
call so that AND-parts of the WHERE/ON clauses can determine they are the AND-parts.
Item_cond_or::fix_fields(), Item_func::fix_fields(), Item_subselect::fix_fields (this one was missed),
and all other items-that-contain-items had to reset thd->thd_marker before calling fix_fields() for
their children items, so that the children can see they are not AND-parts of WHERE/ON.
- The "thd_marker approach" required that a lot of code in different locations maintains correct value of
thd->thd_marker, so it was replaced with:
- The new approach with mark_as_condition_AND_part does not keep context in thd->thd_marker. Instead,
setup_conds() now calls
{where|on_expr}->mark_as_condition_AND_part()
and implementations of that function make sure that:
- parts of AND-expressions get the mark_as_condition_AND_part() call
- Item_in_subselect objects record that they are AND-parts of WHERE/ON
First code
- "Asynchronous procedure call" system
- new THD::check_killed() that serves APC request is called from within most important loops
- EXPLAIN code is now able to generate EXPLAIN output on-the-fly [incomplete]
Parts that are still missing:
- put THD::check_killed() call into every loop where we could spend significant amount of time
- Make sure EXPLAIN code works for group-by queries that replace JOIN::join_tab with make_simple_join()
and other such cases.
- User interface: what error code to use, where to get timeout settings from, etc.
