In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist'.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Correct the test result, all the above binlog event
should be row-based after the bug49132 is fixed IN RBR.
mysql-test/suite/ndb/r/ndb_tmp_table_and_DDL.result:
Test result for bug#49132 base on ndb engine.
mysql-test/suite/ndb/t/ndb_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on ndb engine.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Test result for bug#49132 base on myisam engine.
mysql-test/suite/rpl/t/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on myisam engine.
sql/event_db_repository.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/events.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sp.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_acl.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_udf.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
mysql-test/suite/rpl/t/rpl_set_null_innodb.test:
InnoDB test.
mysql-test/suite/rpl/t/rpl_set_null_myisam.test:
MyISAM test.
mysql-test/suite/rpl_ndb/t/rpl_ndb_set_null.test:
NDB test.
sql/field.h:
Changed reset so that it also clears the bits
among the null_bits for the Field_bit class.
sql/rpl_record.cc:
Resetting field after setting it to null when unpacking
row.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Backported this from Celosia to improve the test cases related to the NTM issue.
sql/log.cc:
Checks the --binlog-direct-non-transactional-updates before choosing
to either use the trxn-cache or not.
sql/mysqld.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/set_var.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/sql_class.h:
Introduces the option --binlog-direct-non-transactional-updates.
'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as
'INSERT ... SELECT' into the temporary table. Since in RBR mode no
other statements related to temporary tables are written into binary log,
this sometimes broke replication.
This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.
BUG#49481: RBR: MyISAM and bit fields may cause slave to stop on delete:
cant find record
BUG#49482: RBR: Replication may break on deletes when MyISAM tables +
char field are used
When using MyISAM tables, despite the fact that the null bit is
set for some fields, their old value is still in the row. This
can cause the comparison of records to fail when the slave is
doing an index or range scan.
We fix this by avoiding memcmp for MyISAM tables when comparing
records. Additionally, when comparing field by field, we first
check if both fields are not null and if so, then we compare
them. If just one field is null we return failure immediately. If
both fields are null, we move on to the next field.
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
mysql-test/extra/rpl_tests/rpl_row_func003.test:
updated test case to ignore new warnings
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for RAND().
Also clarified some old comments.
mysql-test/suite/rpl/r/rpl_misc_functions.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
updated test case to ignore new warnings
mysql-test/suite/rpl/r/rpl_optimize.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_func003.result:
updated result file
mysql-test/suite/rpl/t/rpl_misc_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_optimize.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_trigger.test:
updated test case to ignore new warnings
mysql-test/suite/rpl_ndb/r/rpl_ndb_func003.result:
updated result file
sql/item_create.cc:
Mark RAND() unsafe.
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
For tables with metadata sizes ranging from 251 to 255 the size
of the event data (m_data_size) was being improperly calculated
in the Table_map_log_event constructor. This was due to the fact
that when writing the Table_map_log_event body (in
Table_map_log_event::write_data_body) a call to net_store_length
is made for packing the m_field_metadata_size. It happens that
net_store_length uses *one* byte for storing
m_field_metadata_size when it is smaller than 251 but *three*
bytes when it exceeds that value. BUG 42749 had already
pinpointed and fix this fact, but the fix was incomplete, as the
calculation in the Table_map_log_event constructor considers 255
instead of 251 as the threshold to increment m_data_size by
three. Thence, the window for having a mismatch between the
number of bytes written and the number of bytes accounted in the
event length (m_data_size) was left open for
m_field_metadata_size values between 251 and 255.
We fix this by changing the condition in the Table_map_log_event
constructor to match the one in the net_store_length, ie,
increment one byte if m_field_metadata_size < 251 and three if it
exceeds this value.
mysql-test/suite/rpl/r/rpl_row_tbl_metadata.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_row_tbl_metadata.test:
Changes to the original test case: added slave and moved
file into the rpl suite.
New test case: replicates two tables one with 250 and
another with 252 metadata sizes. This exercises the usage
of 1 or 3 bytes while packing the m_field_metadata_size.
sql/log_event.cc:
Made the m_data_size calculation for the table map log event
to match the number of bytes used while packing the
m_field_metadata_size value (according to net_store_length
function in pack.c).
This bug is the same problem as Bug 49836 for 5.1 versions.
mysql-test/suite/rpl/r/rpl_geometry.result:
Test case for bug 48776
mysql-test/suite/rpl/t/rpl_geometry.test:
Test case for bug 48776
sql/rpl_utility.h:
Add missing case MYSQL_TYPE_GEOMETRY
In statement-based or mixed-mode replication, use DROP TEMPORARY TABLE
to drop multiple tables causes different errors on master and slave,
when one or more of these tables do not exist. Because when executed
on slave, it would automatically add IF EXISTS to the query to ignore
all ER_BAD_TABLE_ERROR errors.
To fix the problem, do not add IF EXISTS when executing DROP TEMPORARY
TABLE on the slave, and clear the ER_BAD_TABLE_ERROR error after
execution if the query does not expect any errors.
mysql-test/suite/rpl/r/rpl_drop_temp.result:
Updated for the patch of bug#49137.
mysql-test/suite/rpl/t/rpl_drop_temp.test:
Added the test file to verify if DROP MULTI TEMPORARY TABLE
will cause different errors on master and slave, when one or
more of these tables do not exist.
sql/log_event.cc:
Added code to handle above cases which are
removed from sql_parse.cc
sql/sql_parse.cc:
Remove the code to issue the 'Unknown table' error,
if the temporary table does not exist when dropping
it on slave. The above cases decribed in comments
will be handled later in log_event.cc.
When the $diff_statement variable for diff_master_slave.inc was
put in multiple lines, the rear part of the statement would be
missing when being executed on Windows systems.
Fixed the problem by always putting the value for $diff_statement
in one line.
mysql-test/suite/rpl/t/rpl_killed_ddl.test:
putting the statement for $diff_statement variable in one line.
The bug is caused by a race condition between the
INSERT DELAYED thread and the client thread's FLUSH TABLE. The
FLUSH TABLE does not guarantee (as is (wrongly) suggested in the
test case) that the INSERT DELAYED is ever executed. The
execution of the test case will thus not be deterministic.
The fix has been to do a deterministic verification that both
threads are complete by checking the content of the table.
This test case tests a circular replication of four hosts.
A--->B--->C--->D--->A
The replicate is slow and needs more time to replicate all data in the circle.
The time it spends to replicate, sometimes, is longer than the time that
wait_condition.inc spends to wait that all data has been replicated. This
cause sporadical failure of this test case.
This patch uses sync_slave_with_master to ensure that all data can be replicated
successfully in the circle.
'LOAD DATA CONCURRENT [LOCAL] INFILE ...' statment only is binlogged as
'LOAD DATA [LOCAL] INFILE ...' in SBR and MBR. As a result, if replication is on,
queries on slaves will be blocked by the replication SQL thread.
This patch write code to write 'CONCURRENT' into the log event if 'CONCURRENT' option
is in the original statement in SBR and MBR.
This fix changes the character set used within the
IBMDB2I handler to hash table names to information
about open tables. Previously, tables with names
that differed only in letter case would hash to the
same data structure. This caused incorrect behavior
or errors when two such tables were in use simultaneously.
mysql-test/suite/ibmdb2i/r/ibmdb2i_bug_49329.result:
Bug#49329 example (and other) engines use wrong collation for open tables hash
Result file for the test case.
mysql-test/suite/ibmdb2i/t/ibmdb2i_bug_49329.test:
Bug#49329 example (and other) engines use wrong collation for open tables hash
Test case for the bug fix.
storage/ibmdb2i/ha_ibmdb2i.cc:
Bug#49329 example (and other) engines use wrong collation for open tables hash
change the character set used within the IBMDB2I
handler to hash table names to information about
open tables.
{PROCEDURE|FUNCTION} FROM ...'
The master would hit an assertion when binary log was
active. This was due to the fact that the thread's diagnostics
area was being cleared before writing to the binlog,
independently of mysql_routine_grant returning an error or
not. When mysql_routine_grant was to return an error, the return
value and the diagnostics area contents would
mismatch. Consequently, neither my_ok would be called nor an
error would be signaled in the diagnostics area, eventually
triggering the assertion in net_end_statement.
We fix this by not clearing the diagnostics area at binlogging
time.
escaped field names
When in mixed or statement mode, the master logs LOAD DATA
queries by resorting to an Execute_load_query_log_event. This
event does not contain the original query, but a rewritten
version of it, which includes the table field names. However, the
rewrite does not escape the field names. If these names match a
reserved keyword, then the slave will stop with a syntax error
when executing the event.
We fix this by escaping the fields names as it happens already
for the table name.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Added test case for the reported bug.
mysql-test/r/mysqlbinlog.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Changed result to support escaped field name.
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Changed result to support escaped field name.
mysql-test/suite/rpl/r/rpl_loaddata.result:
Added result for new test.
Changed show slave status positions which are now different because of
extra escape character in field names.
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
Changed show slave status positions which are now different because of
extra escape character.
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
Changed result to support escaped field name.
mysql-test/suite/rpl/r/rpl_stm_log.result:
Changed result to support escaped field name.
mysql-test/t/mysqlbinlog.test:
Changed positions which is now different because of extra escape
character in field names.
sql/sql_load.cc:
Appended escape characters before and after field names.
This patch fixes three bugs as follows. First, aborting the server while purging
binary logs might generate orphan files due to how the purge operation was
implemented:
(purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)
1 - register the files to be removed in a temporary buffer.
2 - update the log-bin.index.
3 - flush the log-bin.index.
4 - erase the files whose names where register in the temporary buffer
in step 1.
Thus a failure while executing step 4 would generate an orphan file. Second,
a similar issue might happen while creating a new binary as follows:
(create routine - sql/log.cc - MYSQL_BIN_LOG::open)
1 - open the new log-bin.
2 - update the log-bin.index.
Thus a failure while executing step 1 would generate an orphan file.
To fix these issues, we record the files to be purged or created before really
removing or adding them. So if a failure happens such records can be used to
automatically remove dangling files. The new steps might be outlined as follows:
(purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)
1 - register the files to be removed in the log-bin.~rec~ placed in
the data directory.
2 - update the log-bin.index.
3 - flush the log-bin.index.
4 - delete the log-bin.~rec~.
(create routine - sql/log.cc - MYSQL_BIN_LOG::open)
1 - register the file to be created in the log-bin.~rec~
placed in the data directory.
2 - open the new log-bin.
3 - update the log-bin.index.
4 - delete the log-bin.~rec~.
(recovery routine - sql/log.cc - MYSQL_BIN_LOG::open_index_file)
1 - open the log-bin.index.
2 - open the log-bin.~rec~.
3 - for each file in log-bin.~rec~.
3.1 Check if the file is in the log-bin.index and if so ignore it.
3.2 Otherwise, delete it.
The third issue can be described as follows. The purge operation was allowing
to remove a file in use thus leading to the loss of data and possible
inconsistencies between the master and slave. Roughly, the routine was only
taking into account the dump threads and so if a slave was not connect the
file might be delete even though it was in use.
Fixes several test cases.
applied revisions: r6181, r6182, r6183, r6184
r6183 - changes are made only to tests in innodb suite which is only
innodb-consistent-master.opt
Detailed revision comments:
r6181 | vasil | 2009-11-17 12:21:41 +0200 (Tue, 17 Nov 2009) | 33 lines
branches/zip:
At the end of innodb-index.test: restore the environment as it was before
the test was started to silence this warning:
MTR's internal check of the test case 'main.innodb-index' failed.
This means that the test case does not preserve the state that existed
before the test case was executed. Most likely the test case did not
do a proper clean-up.
This is the diff of the states of the servers before and after the
test case was executed:
mysqltest: Logging to '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
mysqltest: Results saved in '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
mysqltest: Connecting to server localhost:13000 (socket /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
mysqltest: ... Connected.
mysqltest: Start processing test commands from './include/check-testcase.test' ...
mysqltest: ... Done processing test commands.
--- /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-11-17 13:10:40.000000000 +0300
+++ /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-11-17 13:10:54.000000000 +0300
@@ -84,7 +84,7 @@
INNODB_DOUBLEWRITE ON
INNODB_FAST_SHUTDOWN 1
INNODB_FILE_FORMAT Antelope
-INNODB_FILE_FORMAT_CHECK Antelope
+INNODB_FILE_FORMAT_CHECK Barracuda
INNODB_FILE_PER_TABLE OFF
INNODB_FLUSH_LOG_AT_TRX_COMMIT 1
INNODB_FLUSH_METHOD
mysqltest: Result content mismatch
not ok
r6182 | marko | 2009-11-17 13:49:15 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Set svn:eol-style on mysql-test files.
r6183 | marko | 2009-11-17 13:51:16 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Prepend loose_ to plugin-only mysql-test options.
r6184 | marko | 2009-11-17 13:52:01 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: innodb-index.test: Restore innodb_file_format_check.
1. add testcase for BUG#46676
2. Allow CREATE INDEX to be interrupted
3. ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log
4. ChangeLog entries
appplied revisions:r6169, r6170, r6175, r6177, r6179
Detailed revision comments:
r6169 | calvin | 2009-11-12 14:40:43 +0200 (Thu, 12 Nov 2009) | 6 lines
branches/zip: add test case for bug#46676
This crash is reproducible with InnoDB plugin 1.0.4 + MySQL 5.1.37.
But no longer reproducible after MySQL 5.1.38 (with plugin 1.0.5).
Add test case to catch future regression.
r6170 | marko | 2009-11-12 15:49:08 +0200 (Thu, 12 Nov 2009) | 4 lines
branches/zip: Allow CREATE INDEX to be interrupted. (Issue #354)
rb://183 approved by Heikki Tuuri
r6175 | vasil | 2009-11-16 20:07:39 +0200 (Mon, 16 Nov 2009) | 4 lines
branches/zip:
Wrap line at 78th char in the ChangeLog
r6177 | calvin | 2009-11-16 20:20:38 +0200 (Mon, 16 Nov 2009) | 2 lines
branches/zip: add an entry to ChangeLog for r6065
r6179 | marko | 2009-11-17 10:19:34 +0200 (Tue, 17 Nov 2009) | 2 lines
branches/zip: ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log.
applied revisions: r6157
Detailed revision comments:
r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines
branches/zip: Fix an issue that a local variable defined
in innodb_file_format_check_validate() is being referenced
across function in innodb_file_format_check_update().
In addition, fix "set global innodb_file_format_check =
DEFAULT" call.
Bug #47167: "set global innodb_file_format_check" cannot
set value by User-Defined Variable."
rb://169 approved by Sunny Bains and Marko.
The 'slave_patternload_file' is assigned to the real path of the load data file
when initializing the object of Relay_log_info. But the path of the load data
file is not formatted to real path when executing event from relay log. So the
error will be encountered if the path of the load data file is a symbolic link.
Actually the global 'opt_secure_file_priv' is not formatted to real path when
loading data from file. So the same thing will happen too.
To fix these errors, the path of the load data file should be formatted to
real path when executing event from relay log. And the 'opt_secure_file_priv'
should be formatted to real path when loading data infile.
mysql-test/suite/rpl/r/rpl_loaddata_symlink.result:
Test result for bug#43913.
mysql-test/suite/rpl/t/rpl_loaddata_symlink-master.sh:
Added the test file to create a link from $MYSQLTEST_VARDIR/std_data
to $MYSQLTEST_VARDIR/std_data_master_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink-slave.sh:
Added the test file to create a link from $MYSQLTEST_VARDIR/std_data
to $MYSQLTEST_VARDIR/std_data_slave_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink.test:
Added the test file to verify if loading data infile will work fine
if the path of the load data file is a symbolic link.
sql/rpl_rli.cc:
Added call 'my_realpath' function for avoiding sometimes the 'fn_format'
function can't format real path rightly.
<tmp_tbl> with RBL
When binlogging the statement, the server always handle the existing
object as a table, even though it is a view. However a view is
handled differently in other parts of the code thus leading the
statement to crash in RBL if the view exists.
This happens because the underlying tables for the view are not opened
when we try to call store_create_info() on the view in order to build
a CREATE TABLE statement.
This patch will only address the crash problem, other binlogging
problems related to CREATE TABLE IF NOT EXISTS LIKE when the existing
object is a view will be solved by BUG 47442.
In RBR, All statements operating on temporary tables should not be binlogged.
Despite this fact, after executing 'TRUNCATE... ' on a temporary table,
the command is still logged, even if in row-based mode. Consequently, this raises
problems in the slave as the table may not exist, resulting in an
execution failure. Ultimately, this causes the slave to report
an error and abort.
After this patch, 'TRUNCATE ...' statement on a temporary table will not be
binlogged in RBR.
Problem: Some system functions that could return different values on
master and slave were not marked unsafe. In particular:
GET_LOCK
IS_FREE_LOCK
IS_USED_LOCK
MASTER_POS_WAIT
RELEASE_LOCK
SLEEP
SYSDATE
VERSION
Fix: Mark these functions unsafe.
mysql-test/extra/rpl_tests/rpl_stm_000001.test:
- The test does not work in mixed mode any more, since it tries to
simulate an error in the sql thread in a query that uses get_lock.
Since get_lock now causes the query to be logged in row format,
the error didn't happen. Hence, we now force statement mode.
- Warnings must be disabled when the unsafe query is issued.
- Replaced some save_master_pos+connection slave+sync_with_master
by sync_slave_with_master.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_row.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_killed.test:
binlog_killed only works in statement format now, since
it switches to row mode in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
suppress warnings for unsafe statements
mysql-test/suite/binlog/t/binlog_stm_row.test:
- Suppress warnings in test that causes warnings.
- The test sets binlog format explicitly, so no need to execute it
twice.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for all unsafe system functions. This test also includes
system functions that were unsafe prior to BUG#47995.
mysql-test/suite/rpl/r/rpl_err_ignoredtable.result:
updated result file
mysql-test/suite/rpl/r/rpl_get_lock.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
new result file
mysql-test/suite/rpl/r/rpl_stm_000001.result:
updated result file
mysql-test/suite/rpl/r/rpl_trigger.result:
updated result file
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
- suppress warnings for unsafe statement
- replaced save_master_pos+connection slave+sync_with_master
with sync_slave_with_master
mysql-test/suite/rpl/t/rpl_get_lock.test:
update test case that causes new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
Added new test case for nondeterministic functions.
mysql-test/suite/rpl/t/rpl_trigger.test:
update test case that causes new warnings
sql/item_create.cc:
Marked some system functions unsafe.
sql/item_strfunc.cc:
Clarified comment related to this bug.
sql/sql_yacc.yy:
Marked sysdate unsafe.
