into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
BitKeeper/deleted/.del-binlog_start_comment.result:
Auto merged
include/my_sys.h:
Auto merged
mysql-test/extra/binlog_tests/blackhole.test:
Auto merged
mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test:
Auto merged
mysql-test/r/case.result:
Auto merged
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Auto merged
mysql-test/suite/rpl/r/rpl_000015.result:
Auto merged
mysql-test/suite/rpl/t/rpl_000015.test:
Auto merged
mysql-test/t/case.test:
Auto merged
sql/log_event.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
BitKeeper/deleted/.del-binlog_start_comment.test:
Using remote file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Manual merge. Taking remote file to update result set after merge,
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
Manual merge.
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Manual merge.
Here is the scenario that causes the failure.(by Mats)
1. The to-be corrupt log event (let's call it X), is split into two
packets B and C on the network level (net_write_buff()). The parts
are X = (x',x''). The part x' ends up in packet B and part x''
ends up in packet C. Prior to the corrupt event X, the event Y has
been written successfully, but has been split into two packets as
well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
packet sequence number, the slave receives the packet, but fails
to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
sending the binary log by exiting mysql_binlog_send(). However, it
leaves the buffer intact, still holding y'' (but not x', since the
write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
disconnection of the client thread, which involves sending an
error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
old contents of the packet is used so that the new packet is
D = (y'',e). Note that this will use a new packet sequence number,
since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
this with x' (which it already received), and writes the event
(x',y'') it to the relay log since it hasn't noticed anything is
amiss.
7. It then tries to read more bytes, which is either e (if the length
given for X just happened to match the length given for Y, or just
plain garbage because the slave is out of sync with what is
actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
which is very likely to be just nonsense.
The problem can be fixed by not resetting net->error after the call of
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.
sql/sql_parse.cc:
Do not reset net->error, if net->error == 2, we should not try to use the connection again
The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.
After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.
This patch is based on the patch for BUG#29749, which is not pushed
sql/sql_acl.cc:
when create/rename/drop users, don't write the binlog if the statement make no changes
mysql-test/r/rpl_user.result:
New BitKeeper file ``mysql-test/r/rpl_user.result''
mysql-test/t/rpl_user.test:
New BitKeeper file ``mysql-test/t/rpl_user.test''
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test:
Auto merged
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Auto merged
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Auto merged
mysql-test/suite/binlog/t/binlog_row_mix_innodb_myisam.test:
Auto merged
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/slave.cc:
Auto merged
mysql-test/include/have_multi_ndb.inc:
Manual merge.
mysql-test/suite/rpl_ndb/r/rpl_ndb_transaction.result:
Manual merge.
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction.test:
Manual merge.
Problem: Replication fails when master is mysql-5.1-wl2325-5.0-drop6 and
slave is mysql-5.1-new-rpl. The reason is that, in
mysql-5.1-wl2325-5.0-drop6, the event type id's were different than in
mysql-5.1-new-rpl.
Fix (in mysql-5.1-new-rpl):
(1) detect that the server that generated the events uses the old
format, by checking the server version of the format_description_log_event
This patch recognizes mysql-5.1-wl2325-5.0-drop6p13-alpha,
mysql-5.1-wl2325-5.0-drop6, mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
(2) if the generating server is old, map old event types to new event
types using a permutation array.
I've also added a test case which reads binlogs for four different
versions.
mysql-test/suite/binlog/std_data/binlog_old_version_5_1-telco.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1-telco.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_row.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_row.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_stm.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_stm.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1_17.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1_17.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1_23.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1_23.000001
sql/log_event.cc:
Added code to read events generated by
mysql-5.1-wl2325-5.0-drop6p13-alpha, mysql-5.1-wl2325-5.0-drop6,
mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
More precisely, the event type id's had different numbers in
those versions. To fix, we add a permutation array which maps old_id to
new_id when the format_description_log_event indicates that the
originating server is of the old type. We also need to permute the
post_header_len array accordingly.
sql/log_event.h:
sql/log_event.h@1.169, 2008-01-09 11:34:37+01:00, sven@riska.(none) +5 -1
Added declaration needed in log_event.cc. Also, the destructor of
Format_description_log_event is sometimes called when post_header_len is
null, so we must pass the MY_ALLOW_ZERO_PTR flag to my_free.
mysql-test/suite/binlog/r/binlog_old_versions.result:
Result file for new test.
mysql-test/suite/binlog/t/binlog_old_versions.test:
New test case that loads binlogs from several old versions.
mysql-test/r/binlog_start_comment.result:
Result change.
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
Result change.
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Result change.
mysql-test/suite/rpl/r/rpl_timezone.result:
Result change.
mysql-test/suite/rpl_ndb/r/rpl_ndb_transaction.result:
Result change.
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction.test:
Masking out columns with binlog positions from slave status.
mysql-test/t/binlog_start_comment.test:
Added missing drop table causing subsequent tests to fail.
sql/log_event.cc:
Changing last_err* fields to client_last_err*
sql/log_event_old.cc:
Changing last_err* fields to client_last_err*
into mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#28908/5.1
sql/set_var.cc:
Auto merged
BitKeeper/deleted/.del-rpl_slave_skip.result:
Auto merged
BitKeeper/deleted/.del-rpl_slave_skip.test:
Auto merged
sql/slave.cc:
Manual merged
read_buffer_size set on master
BUG#33413 show binlog events fails if binlog has event size of close
to max_allowed_packet
The size of Append_block replication event was determined solely by
read_buffer_size whereas the rest of replication code deals with
max_allowed_packet.
When the former parameter was set to larger than the latter there were
two artifacts: the master could not read events from binlog;
show master events did not show.
Fixed with
- fragmenting the used io-cached buffer into pieces each size of less
than max_allowed_packet (bug#30435)
- incrementing show-binlog-events handling thread's max_allowed_packet
with the max estimated for the replication header size
include/my_sys.h:
accessor-macros added in order not to mess with the io cache's implementation
details in code that merely exploits the io-cache.
sql/sql_repl.cc:
BUG#33413: incrementing thd->variables.max_allowed_packet with
the max estimation for the replication header size (from bug#19402);
refactoring log_loaded_block() to fragment the io_cache buffer in case
read_buffer_size > max_allowed_packet.
mysql-test/r/rpl_loaddata_map.result:
New BitKeeper file ``mysql-test/r/rpl_loaddata_map.result''
mysql-test/t/rpl_loaddata_map-master.opt:
specific options to trigger BUG#30435, BUG#33413 situations
mysql-test/t/rpl_loaddata_map-slave.opt:
max_allowed_packet to be compatible with the master's version.
mysql-test/t/rpl_loaddata_map.test:
regression tests for two bugs.
Now, every transaction (including autocommit transactions) start with
a BEGIN and end with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
mysql-test/t/rpl_transaction-master.opt:
BitKeeper file /home/sven/bk/b26395-autocommit-xa/5.0-rpl/mysql-test/t/rpl_transaction-master.opt
mysql-test/t/rpl_transaction-slave.opt:
BitKeeper file /home/sven/bk/b26395-autocommit-xa/5.0-rpl/mysql-test/t/rpl_transaction-slave.opt
mysql-test/r/mix_innodb_myisam_binlog.result:
Updated result file
mysql-test/r/multi_update.result:
Updated result file
mysql-test/r/rpl_transaction.result:
New result file for new test case.
mysql-test/r/sp_trans_log.result:
Updated result file
mysql-test/r/variables-big.result:
Updated result file
mysql-test/t/rpl_transaction.test:
New test case.
sql/log.cc:
- Always write BEGIN and COMMIT around statements, even in autocommit
mode.
- Added comments for binlog_commit and binlog_rollback.
sql/log_event.cc:
Added debug trigger to avoid writing xid events to the binlog.
ignores future_group_master_log_p
There was a redundant assignement. However, that's the only artifact.
Wrt to future_group_master_log_position, there is no issue.
The counter is supposed to be set at Log_event::exec_event().
It's used only by Innodb for recovery purposes.
sql/sql_repl.cc:
removing a redundant line which arrived with the revision 1.102.1.7.
When set the server-id dynamically, the server_id member of current thread is not updated.
Update the server_id member of current thread after updated the global variable value.
sql/set_var.cc:
Update server_id of current thread
mysql-test/r/rpl_server_id.result:
Add test for BUG#28908
mysql-test/t/rpl_server_id.test:
Add test for BUG#28908
Complementary patch since LOAD DATA INFILE was not covered in
the previous patch.
This patch adds a check so that the slave skip counter is not
decreased to zero if seeing a BEGIN_LOAD_QUERY_EVENT,
APPEND_BLOCK_EVENT, or CREATE_FILE_EVENT since these cannot
end a group. The group is terminated by an EXECUTE_LOAD_QUERY_
EVENT or DELETE_FILE_EVENT.
mysql-test/r/rpl_slave_skip.result:
Result change.
mysql-test/t/rpl_slave_skip.test:
Adding tests to test that the first event of a LOAD DATA INFILE
can be skipped safely for both transactional and non-transactional
tables. Also include a case that will generate a DELETE_FILE event
last in the group, and this should be properly skipped as well.
sql/slave.cc:
Not decrementing slave skip counter to zero when seeing a
BEGIN_LOAD_QUERY_EVENT, APPEND_BLOCK_EVENT, or CREATE_FILE_EVENT
since these cannot end a group.
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
mysql-test/include/have_multi_ndb.inc:
Auto merged
mysql-test/lib/mtr_cases.pl:
Auto merged
mysql-test/lib/mtr_report.pl:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Auto merged
mysql-test/suite/rpl_ndb/r/rpl_row_basic_7ndb.result:
Auto merged
mysql-test/suite/rpl_ndb/t/disabled.def:
Auto merged
sql/ha_ndbcluster_binlog.cc:
Auto merged
sql/log.cc:
Auto merged
sql/log_event_old.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/rpl_rli.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/slave.cc:
Auto merged
sql/sql_binlog.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_string.cc:
Auto merged
mysql-test/Makefile.am:
SCCS merged
mysql-test/mysql-test-run.pl:
Manual merge.
mysql-test/suite/binlog/t/disabled.def:
Manual merge.
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
Manual merge.
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Manual merge.
sql/log_event.cc:
Manual merge.
,
into hezx.(none):/media/sda3/work/mysql/bkwork/bug#32205/mysql-5.1-new-rpl
mysql-test/r/mysqlbinlog2.result:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Auto merged
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Auto merged
sql/log_event.cc:
Auto merged
fine
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
mysql-test/r/mysqlbinlog.result:
Update result for BUG#32205
mysql-test/r/mysqlbinlog2.result:
Update result for BUG#32205
mysql-test/r/user_var-binlog.result:
Update result for BUG#32205
mysql-test/suite/binlog/r/binlog_stm_ctype_ucs.result:
Update result for BUG#32205
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Update result for BUG#32205
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
fix test for BUG#32205
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Update result for BUG#32205
mysql-test/suite/rpl/r/rpl_stm_charset.result:
Update result for BUG#32205
sql/log_event.cc:
Start a newline before appending delimiter after a query string
mysql-test/suite/binlog/r/binlog_start_comment.result:
Add test for BUG#32205
mysql-test/suite/binlog/t/binlog_start_comment.test:
Add test for BUG#32205
rpl_ndb tests on sapsrv1.
sql/ha_ndbcluster_binlog.cc:
Try to fix assertion failures at slave shutdown when running
rpl_ndb tests. If the binlog thread is killed, which happens during
shutdown, open_tables returns error without setting an error
in THD. Therefore one can't access thd->main_da.message() if thd->killed.
into bodhi.(none):/opt/local/work/mysql-5.1-runtime
sql/ha_ndbcluster.cc:
Auto merged
sql/ha_ndbcluster_binlog.cc:
Auto merged
sql/mysqld.cc:
Auto merged
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
mysql-test/r/ctype_ucs_binlog.result:
Update test result for BUG#32205
mysql-test/r/mix_innodb_myisam_binlog.result:
Update test result for BUG#32205
mysql-test/r/mysqlbinlog.result:
Update test result for BUG#32205
mysql-test/r/rpl_charset.result:
Update test result for BUG#32205
mysql-test/r/rpl_timezone.result:
Update test result for BUG#32205
mysql-test/r/user_var-binlog.result:
Update test result for BUG#32205
mysql-test/t/mix_innodb_myisam_binlog.test:
Fixed for BUG#32205
sql/log_event.cc:
Start a newline before appending delimiter after a query string
mysql-test/r/binlog_start_comment.result:
Add test for BUG#32205
mysql-test/t/binlog_start_comment.test:
Add test for BUG#32205
Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD). Currently, mysqlbinlog
cannot print the FD.
As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.
This patch does several things:
- Format_description_log_event (FD) now print themselves in base64
format.
- mysqlbinlog is now able to print FD events. It has three modes:
--base64-output=auto Print row events in base64 output, and print
FD event. The FD event is printed even if
it is outside the range specified with
--start-position, because it would not be
safe to read row events otherwise. This is
the default.
--base64-output=always Like --base64-output=auto, but also print
base64 output for query events. This is
like the old --base64-output flag, which
is also a shorthand for
--base64-output=always
--base64-output=never Never print base64 output, generate error if
row events occur in binlog. This is
useful to suppress the FD event in binlogs
known not to contain row events (e.g.,
because BINLOG statement is unsafe,
requires root privileges, is not SQL, etc)
- the BINLOG statement now handles FD events correctly, by setting
the thread's rli's relay log's description_event_for_exec to the
loaded event.
In fact, executing a BINLOG statement is almost the same as reading
an event from a relay log. Before my patch, the code for this was
separated (exec_relay_log_event in slave.cc executes events from
the relay log, mysql_client_binlog_statement in sql_binlog.cc
executes BINLOG statements). I needed to augment
mysql_client_binlog_statement to do parts of what
exec_relay_log_event does. Hence, I did a small refactoring and
moved parts of exec_relay_log_event to a new function, which I
named apply_event_and_update_pos. apply_event_and_update_pos is
called both from exec_relay_log_event and from
mysql_client_binlog_statement.
- When a non-FD event is executed in a BINLOG statement, without
previously executing a FD event in a BINLOG statement, it generates
an error, because that's unsafe. I took a new error code for that:
ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.
In order to get a decent error message containing the name of the
event, I added the class method char*
Log_event::get_type_str(Log_event_type type), which returns a
string name for the given Log_event_type. This is just like the
existing char* Log_event::get_type_str(), except it is a class
method that takes the log event type as parameter.
I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
so that names of old rows event are properly printed.
- When reading an event, I added a check that the event type is known
by the current Format_description_log_event. Without this, it may
crash on bad input (and I was struck by this several times).
- I patched the following test cases, which all contain BINLOG
statements for row events which must be preceded by BINLOG
statements for FD events:
- rpl_bug31076
While I was here, I fixed some small things in log_event.cc:
- replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places
- replaced return by DBUG_VOID_RETURN in one place
- The name of the logfile can be '-' to indicate stdin. Before my
patch, the code just checked if the first character is '-'; now it
does a full strcmp(). Probably, all arguments that begin with a -
are already handled somewhere else as flags, but I still think it
is better that the code reflects what it is supposed to do, with as
little dependencies as possible on other parts of the code. If we
one day implement that all command line arguments after -- are
files (as most unix tools do), then we need this.
I also fixed the following in slave.cc:
- next_event() was declared twice, and queue_event was not static but
should be static (not used outside the file).
client/client_priv.h:
Declared the new option for base64 output.
client/mysqlbinlog.cc:
- Change from using the two-state command line option
"default/--base64-output" to the three-state
"--base64-output=[never|auto|always]"
- Print the FD event even if it is outside the --start-position range.
- Stop if a row event is about to be printed without a preceding FD
event.
- Minor fixes:
* changed 4 to EVENT_TYPE_OFFSET in some places
* Added comments
* before, "mysqlbinlog -xyz" read from stdin; now it does not
(only "mysqlbinlog -" reads stdin).
mysql-test/r/mysqlbinlog2.result:
Updated result file: mysqlbinlog now prints ROLLBACK always.
mysql-test/suite/binlog/t/disabled.def:
The test must be disabled since it reveals another bug: see BUG#33247.
mysql-test/suite/rpl/r/rpl_bug31076.result:
Updated result file
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Updated result file
mysql-test/suite/rpl/t/rpl_bug31076.test:
Had to add explicit Format_description_log_event before other BINLOG
statements
mysql-test/t/mysqlbinlog2.test:
we must suppress base64 output in result file because it contains a
timestamp
sql/log_event.cc:
- Made FD events able to print themselves
- Added check that the current FD event knows about the event type, when
an event is about to be read. (Hint to reviewers: I had to re-indent
a big block because of this; use diff -b)
* To get a decent error message, I also added a class method
const char* Log_event::get_type_str(Log_event_type)
which converts number to event type string without having a
Log_event object.
* Made Log_event::get_type_str aware of PRE_GA_*_ROWS_LOG_EVENT.
- Minor fixes:
* Changed return to DBUG_VOID_RETURN
sql/log_event.h:
- Declared enum to describe the three base64_output modes
- Use the enum instead of a flag
- Declare the new class method get_type_str (see log_event.cc)
sql/share/errmsg.txt:
Added error msg.
sql/slave.cc:
- Factored out part of exec_relay_log_event to the new function
apply_event_and_update_pos, because that code is needed when executing
BINLOG statements. (this is be functionally equivalent to the
previous code, except: (1) skipping events is now optional, controlled
by a parameter to the new function (2) the return value of
exec_relay_log_event has changed; see next item).
- Changed returned error value to always be 1. Before, it would return
the error value from apply_log_event, which was unnecessary. This
change is safe because the exact return value of exec_relay_log_event
is never examined; it is only tested to be ==0 or !=0.
- Added comments describing exec_relay_log_event and
apply_event_and_update_pos.
- Minor fixes:
* Removed duplicate declaration of next_event, made queue_event
static.
* Added doxygen code to include this file.
sql/slave.h:
Declared the new apply_event_and_update_pos
sql/sql_binlog.cc:
- Made mysql_binlog_statement set the current FD event when the given
event is an FD event. This entails using the new function
apply_event_and_update_pos from slave.cc instead of just calling the
ev->apply method.
- Made mysql_binlog_statement fail if the first BINLOG statement is not
an FD event.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
New test file needs new result file
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Added test case to verify that:
- my patch fixes the bug
- the new --base64-output flag works as expected
- base64 events not preceded by an FD event give an error
- an event of a type not known by the current FD event fails cleanly.
mysql-test/suite/binlog/std_data/binlog-bug32407.000001:
BitKeeper file /home/sven/bk/b32407-5.1-new-rpl-mysqlbinlog_base64/mysql-test/suite/binlog/std_data/binlog-bug32407.000001
Now, every transaction (including autocommit transactions) starts with
a BEGIN and ends with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
mysql-test/r/multi_update.result:
Updated result file
mysql-test/r/sp_trans_log.result:
Updated result file
mysql-test/suite/binlog/r/binlog_innodb.result:
Updated result file
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated result file
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Updated result file
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated result file
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated result file
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Updated result file
mysql-test/suite/rpl/r/rpl_row_charset_innodb.result:
Updated result file
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Updated result file
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Updated result file
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
Updated result file
mysql-test/suite/rpl/r/rpl_truncate_3innodb.result:
Updated result file
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_stm_innodb.result:
Updated result file
sql/log.cc:
- Always write BEGIN and COMMIT around statements, even in autocommit
mode.
- Added comments for binlog_commit and binlog_rollback.
sql/log_event.cc:
Added debug trigger to avoid writing xid events to the binlog.
mysql-test/suite/rpl_ndb/r/rpl_ndb_transaction.result:
Results for new test case
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction-master.opt:
Options for new test case
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction-slave.opt:
Options for new test case
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction.test:
Added new test case.
into station.:/mnt/raid/alik/MySQL/devel/5.1-rt
client/mysqltest.c:
Auto merged
include/mysql_com.h:
Auto merged
libmysqld/emb_qcache.cc:
Auto merged
libmysqld/emb_qcache.h:
Auto merged
libmysqld/lib_sql.cc:
Auto merged
mysql-test/lib/mtr_report.pl:
Auto merged
sql/ha_partition.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/slave.cc:
Auto merged
sql/sql_class.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_db.cc:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_partition.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/table.cc:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
sql/protocol.cc:
SCCS merged
into mysql.com:/home/bar/mysql-work/mysql-5.1.b29562v2
mysql-test/suite/rpl_ndb/t/disabled.def:
Auto merged
sql/ha_ndbcluster_binlog.cc:
Auto merged
sql/log_event.cc:
Auto merged
client/mysqltest.c:
Remove a call to my_message() (server call) in case of a client error.
It asserts in the embedded build now, since is called after send_ok().
libmysqld/emb_qcache.cc:
Use net_send_eof (embedded implementation) in embedded query cache/
send result to client, since send_eof currently does not
send anything.
libmysqld/emb_qcache.h:
Declare net_send_eof.
libmysqld/lib_sql.cc:
Fix the main loop of the embedded server to use the new Diagnostics_area
API.
sql/log.cc:
Silence errors of open_performance_schema_table. This function
is called for general logging, and it happens after the error
has been sent to the client, and thus triggers an assert.
storage/myisam/ha_myisam.cc:
Remove an old hack that broke repair.test in embedded build:
unless we clear an error here, the server attempts to send OK after
ERROR. This currently asserts.
into mysql.com:/Users/davi/mysql/mysql-5.1-runtime
sql/ha_ndbcluster_binlog.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_table.cc:
Auto merged
mysql-test/r/partition_range.result:
removed fix for bug#30573
mysql-test/suite/parts/r/rpl_partition.result:
updated result file
mysql-test/t/partition_range.test:
removed test case for bug#30573
sql/ha_partition.cc:
removed fix for bug#30573
into mysql.com:/home/gluh/MySQL/Merge/5.1-opt
client/mysql.cc:
Auto merged
client/mysqltest.c:
Auto merged
include/mysql_com.h:
Auto merged
libmysql/CMakeLists.txt:
Auto merged
mysql-test/r/delayed.result:
Auto merged
mysql-test/r/func_misc.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/myisam.result:
Auto merged
mysql-test/r/ps.result:
Auto merged
mysql-test/t/func_misc.test:
Auto merged
mysql-test/t/merge.test:
Auto merged
mysql-test/t/myisam.test:
Auto merged
mysql-test/t/range.test:
Auto merged
mysql-test/t/subselect.test:
Auto merged
mysql-test/t/type_datetime.test:
Auto merged
mysql-test/t/variables.test:
Auto merged
sql/field.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisam/mi_check.c:
Auto merged
mysql-test/include/mix1.inc:
manual merge
mysql-test/r/innodb_mysql.result:
manual merge
mysql-test/r/range.result:
manual merge
sql/item_cmpfunc.cc:
manual merge
into mysql.com:/home/gluh/MySQL/Merge/5.1-opt
BitKeeper/etc/ignore:
auto-union
client/mysql.cc:
Auto merged
client/mysqltest.c:
Auto merged
include/mysql_com.h:
Auto merged
libmysql/CMakeLists.txt:
Auto merged
libmysqld/lib_sql.cc:
Auto merged
mysql-test/r/archive.result:
Auto merged
mysql-test/r/create.result:
Auto merged
mysql-test/r/delayed.result:
Auto merged
mysql-test/r/func_misc.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/innodb_mysql.result:
Auto merged
mysql-test/r/merge.result:
Auto merged
mysql-test/r/ps.result:
Auto merged
mysql-test/r/type_date.result:
Auto merged
mysql-test/suite/rpl/r/rpl_innodb_bug28430.result:
Auto merged
mysql-test/t/create.test:
Auto merged
mysql-test/t/func_misc.test:
Auto merged
mysql-test/t/information_schema.test:
Auto merged
mysql-test/t/merge.test:
Auto merged
mysql-test/t/subselect.test:
Auto merged
mysql-test/t/type_date.test:
Auto merged
mysql-test/t/type_datetime.test:
Auto merged
mysql-test/t/variables.test:
Auto merged
mysys/queues.c:
Auto merged
sql/events.cc:
Auto merged
sql/field.cc:
Auto merged
sql/field.h:
Auto merged
sql/ha_partition.cc:
Auto merged
sql/handler.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/protocol.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/slave.cc:
Auto merged
sql/sql_class.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_db.cc:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_partition.cc:
Auto merged
sql/sql_plugin.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_string.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
sql/table.cc:
Auto merged
sql/table.h:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisam/mi_check.c:
Auto merged
storage/myisam/mi_open.c:
Auto merged
tests/mysql_client_test.c:
Auto merged
mysql-test/lib/mtr_report.pl:
manual merge
mysql-test/r/myisam.result:
manual merge
mysql-test/r/partition.result:
manual merge
mysql-test/r/user_var.result:
manual merge
mysql-test/t/myisam.test:
manual merge
mysql-test/t/partition.test:
manual merge
mysql-test/t/user_var.test:
manual merge
sql/item.h:
manual merge
sql/item_func.cc:
manual merge
storage/myisammrg/ha_myisammrg.cc:
manual merge
into mysql.com:/home/gluh/MySQL/Merge/5.0-opt
client/mysql.cc:
Auto merged
client/mysqltest.c:
Auto merged
include/mysql_com.h:
Auto merged
libmysql/CMakeLists.txt:
Auto merged
myisam/mi_check.c:
Auto merged
mysql-test/r/delayed.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/myisam.result:
Auto merged
mysql-test/r/ps.result:
Auto merged
mysql-test/t/merge.test:
Auto merged
mysql-test/t/myisam.test:
Auto merged
mysql-test/t/subselect.test:
Auto merged
mysql-test/t/type_datetime.test:
Auto merged
mysql-test/t/variables.test:
Auto merged
sql/field.cc:
Auto merged
sql/ha_myisam.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
mysql-test/r/func_misc.result:
manual merge
mysql-test/r/innodb_mysql.result:
manual merge
mysql-test/t/func_misc.test:
manual merge
mysql-test/t/innodb_mysql.test:
manual merge
sql/sql_insert.cc:
manual merge
- Make conditions like "date_col $CMP$ 'datetime-const'" range-sargable
mysql-test/r/range.result:
BUG#32198: Comparison of DATE with DATETIME still not using indexes correctly
- Testcase
mysql-test/t/range.test:
BUG#32198: Comparison of DATE with DATETIME still not using indexes correctly
- Testcase
sql/field.cc:
BUG#32198: Comparison of DATE with DATETIME still not using indexes correctly
- Added comments
