Before, the Seconds_behind_master was updated already when an event
was queued for a worker thread to execute later. This might lead users
to interpret a low value as the slave being almost up to date with the
master, while in reality there might still be lots and lots of events
still queued up waiting to be applied by the slave.
See https://lists.launchpad.net/maria-developers/msg08958.html for
more detailed discussions.
Patch backported from MariaDB 10.1
- Ensure that we wait with cleanup() until slave thread has stopped.
- Added signal_thd_deleted() to signal close_connections() that all THD's has been freed.
Other things
- Removed not needed calls to THD_CHECK_SENTRY() when we are calling 'delete thd'.
MDEV-8685 MariaDB fails to decode Anonymous_GTID entries
MDEV-5705 Replication testing: 5.6->10.0
- Ignoring GTID events from MySQL 5.6+ (Allows replication from MySQL 5.6+ with GTID enabled)
- Added ignorable events from MySQL 5.6
- mysqlbinlog now writes information about GTID and ignorable events.
- Added more information in error message when replication stops because of wrong information in binary log.
- Fixed wrong test when write_on_release() should flush cache.
Introduce Log_event_writer() that encapsulates
writing data to an IO_CACHE with automatic checksum calculation.
Now all events properly checksum themselves as needed.
Use Log_event_writer in MYSQL_BIN_LOG::write_cache() instead
of copy-pasting its logic all over.
Later Log_event_writer will also do encryption.
commit f1abd015dc
Author: Andrei Elkin <aelkin@mysql.com>
Date: Thu Nov 12 17:10:19 2009 +0200
Bug #47210 first execution of "start slave until" stops too early
- If run with valgrind, mysqltest will now wait longer when syncronizing slave with master
- Ensure that we wait with cleanup() until slave thread has stopped.
- Added signal_thd_deleted() to signal close_connections() that all THD's has been freed.
- Check in handle_fatal_signal() that we don't use variables that has been freed.
- Increased some timeouts when run with --valgrind
Other things:
- Fixed wrong test in one_thread_per_connection_end() if galera is used.
- Removed not needed calls to THD_CHECK_SENTRY() when we are calling 'delete thd'.
- Part 3: Adding mem_root to push_back() and push_front()
Other things:
- Added THD as an argument to some partition functions.
- Added memory overflow checking for XML tag's in read_xml()
- Added mem_root to all calls to new Item
- Added private method operator new(size_t size) to Item to ensure that
we always use a mem_root when creating an item.
This saves use once call to current_thd per Item creation
Added mandatory thd parameter to Item (and all derivative classes) constructor.
Added thd parameter to all routines that may create items.
Also removed "current_thd" from Item::Item. This reduced number of
pthread_getspecific() calls from 290 to 177 per OLTP RO transaction.
Fix was to add a test in Query_log_event::Query_log_event() if we are using
CREATE ... SELECT and in this case use trans cache, like we do on the master.
This avoid using (with doesn't have checksum)
Other things:
- Removed dummy call my_checksum(0L, NULL, 0)
- More DBUG_PRINT
- Cleaned up Log_event::need_checksum() to make it more readable (similar as in MySQL 5.6)
- Renamed variable that was hiding another one in create_table_imp()
field.cc
- Fixed warning about overlapping memory copy (backport from 10.0)
Item_subselect.cc
- Fixed core dump in main.view
- Problem was that thd->lex->current_select->master_unit()->item was not set, which caused crash in maxr_as_dependent
sql/mysqld.cc
- Got error on shutdown as we where freeing mutex before all THD objects was freed
(~THD uses some mutex). Fixed by during shutdown freeing THD inside mutex.
sql/log.cc
- log_space_lock and LOCK_log where locked in inconsistenly. Fixed by not having a log_space_lock around purge_logs.
sql/slave.cc
- Remove unnecessary log_space_lock
- Move cond_broadcast inside lock to ensure we don't miss the signal
Other things:
- Avoid calling init_and_set_log_file_name() when opening binary log.
- Remove newlines early when reading from index file.
- Ensure that reset_logs() will work even if thd is 0 (Can happen on startup)
- Added thd to sart_slave_threads() for better error handling.
- Changed ER(ER_...) to ER_THD(thd, ER_...) when thd was known or if there was many calls to current_thd in the same function.
- Changed ER(ER_..) to ER_THD_OR_DEFAULT(current_thd, ER...) in some places where current_thd is not necessary defined.
- Removing calls to current_thd when we have access to thd
Part of this is optimization (not calling current_thd when not needed),
but part is bug fixing for error condition when current_thd is not defined
(For example on startup and end of mysqld)
Notable renames done as otherwise a lot of functions would have to be changed:
- In JOIN structure renamed:
examined_rows -> join_examined_rows
record_count -> join_record_count
- In Field, renamed new_field() to make_new_field()
Other things:
- Added DBUG_ASSERT(thd == tmp_thd) in Item_singlerow_subselect() just to be safe.
- Removed old 'tab' prefix in JOIN_TAB::save_explain_data() and use members directly
- Added 'thd' as argument to a few functions to avoid calling current_thd.
Add log_bin_index, log_bin_basename and relay_log_basename system
variables. Also, convert relay_log_index system variable to
NO_CMD_LINE and implement --relay-log-index as a command line
option.
1. After a period of wait (where last_master_timestamp=0)
do NOT restore the last_master_timestamp to the timestamp
of the last executed event (which would mean we've just
executed it, and we're that much behind the master).
2. Update last_master_timestamp before executing the event,
not after.
Take the approach from the this commit (but with a different test
case that actually makes sense):
commit 0c75ab453fb8c5439576af8fe5add7a1b89f1569
Author: Luis Soares <luis.soares@sun.com>
Date: Thu Apr 15 17:39:31 2010 +0100
BUG#52166: Seconds_Behind_Master spikes after long idle period
The slave SQL thread was clearing serial_rgi->thd before deleting
serial_rgi, which could cause access to NULL THD.
The clearing was introduced in commit
2e100cc5a4 and is just plain wrong. So revert
that part (single line) of that commit.
Thanks to Daniel Black for bug analysis and test case.
Add some suppressions that were missing. They are for if a STOP SLAVE is
executed early during IO thread startup, when it is negotiating with the
master. The master connection may be killed in the middle of a
mysql_real_query(), which is not a test failure if it is a network error.
This also caught one real code error, fixed with this commit: The I/O thread
would fail to automatically reconnect if a network error happened while
fetching the value of @@GLOBAL.gtid_domain_id.
Delay spawning parallel replication worker threads until a slave SQL
thread is running, and de-spawn them when the last SQL thread stops.
This is especially useful to avoid needless threads on a master in a
setup where same my.cnf is used on masters and slaves.
The problem occurs in parallel replication in GTID mode, when we are using
multiple replication domains. In this case, if the SQL thread stops, the
slave GTID position may refer to a different point in the relay log for each
domain.
The bug was that when the SQL thread was stopped and restarted (but the IO
thread was kept running), the SQL thread would resume applying the relay log
from the point of the most advanced replication domain, silently skipping all
earlier events within other domains. This caused replication corruption.
This patch solves the problem by storing, when the SQL thread stops with
multiple parallel replication domains active, the current GTID
position. Additionally, the current position in the relay logs is moved back
to a point known to be earlier than the current position of any replication
domain. Then when the SQL thread restarts from the earlier position, GTIDs
encountered are compared against the stored GTID position. Any GTID that was
already applied before the stop is skipped to avoid duplicate apply.
This patch should have no effect if multi-domain GTID parallel replication is
not used. Similarly, if both SQL and IO thread are stopped and restarted, the
patch has no effect, as in this case the existing relay logs are removed and
re-fetched from the master at the current global @@gtid_slave_pos.
If somehow the COMMIT or XID event in an event group was missing, the code in
parallel replication to handle this was not sufficient, leading to server
deadlock.
The order of initialisation during server startup was incorrect. The slave
threads were started before the parallel replication worker thread pool was
initialised, allowing a race where uninitialised data could be accessed.
Adjust the configuration options, as discussed on the
maria-developers@ mailing list.
The option to hint a transaction to not be replicated in parallel is
now called @@skip_parallel_replication, consistent with
@@skip_replication.
And the --slave-parallel-mode is now simplified to have just one of
the following values:
none
minimal
conservative
optimistic
aggressive
This reflects successively harder efforts to find opportunities to run
things in parallel on the slave. It allows to extend the server with
more automatic heuristics in the future without having to introduce a
new configuration option for each and every one.
special character sets like utf16, utf32, ucs2.
Analysis: MySQL server does not support few special character sets like
utf16,utf32 and ucs2 as "client's character set"(eg: utf16,utf32, ucs2).
It is known limitation listed in the documentation
http://dev.mysql.com/doc/refman/5.5/en/charset-connection.html.
The default value for default-character-set parameter is 'auto'
which means that if the server's character set is not supported,
then server automatically changes client's character set to
predefined character-set which is 'latin1' in the current code.
Eg:
$ ./mysql -uroot -S$SOCKET_FILE --default-character-set=utf16
ERROR 1231 (42000): Variable 'character_set_client' can't be set to the value of 'utf16'
$ ./mysql -uroot -S$SOCKET_FILE will be successfully connected to
server with 'latin1' as default client side character set.
When IO thread is trying to connect to Master, it sets server's character
set as client's character set. When Slave server is started with these
special character sets, IO thread (which is like a connection to Master)
fails because of the above said limitation.
Fix: Now even IO thread also behaves the same as a regular client behaves.
i.e., If server's character set is not supported as client's character set,
then set default's client character set(latin1) as client's character set.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
Moved freeing of mutex earlier, as we don't need to have log_space_cond locked for doing rotate_relay_log()
sql/slave.cc:
Moved freeing of mutex earlier, as we don't need to have log_space_cond locked for doing rotate_relay_log()
If the slave gets a reconnect in the middle of a GTID event group, normally
it will re-fetch that event group, skipping the first part that was already
queued for the SQL thread.
However, if the master crashed while writing the event group, the group is
incomplete. This patch detects this case and makes sure that the
transaction is rolled back and nothing is skipped from any following
event groups.
Similarly, a network proxy might cause the reconnect to end up on a
different master server. Detect this by noticing a different server_id,
and similarly in this case roll back the partially received group.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
mysqldump:
- Added --log-queries to allow one to disable logging for the dump
sql/log_event.cc:
- Removed setting of enable_slow_log as it's not required anymore.
sql/sql_parse.cc:
- Set enable_slow_log to value of thd->variables.sql_log_slow as this will speed up tests if slow log is disabled.
- opt_log_slow_admin_statements can now only disable slow log, not enable it.
sql/sql_explain.cc:
- Minor cleanup
Other things:
- Added sql_log_slow to system variables.
- Changed opt_slow_log to global_system_variables.sql_log_slow in all files
- Updated tests to reflect changes
config.h.cmake:
define NOMINMAX, otherwise Windows system headers define min() and max() macros
sql/slave.cc:
mi->report() has one more argument in MariaDB
storage/xtradb/buf/buf0flu.cc:
xtradb fixes for windows, again
bzr merge -r4264 maria/5.5
Text conflict in sql/mysqld.cc
Text conflict in storage/xtradb/btr/btr0cur.c
Text conflict in storage/xtradb/buf/buf0buf.c
Text conflict in storage/xtradb/buf/buf0lru.c
Text conflict in storage/xtradb/handler/ha_innodb.cc
5 conflicts encountered.
Fix the bug properly (plugin cannot be unloaded as long as it's locked).
Enable and fix the test case.
Significantly reduce number of LOCK_plugin locks for semisync
(practically all locks were removed)
Merge the patches into MariaDB 10.0 main.
With this patch, parallel replication will now automatically retry a
transaction that fails due to deadlock or other temporary error, same as
single-threaded replication.
We catch deadlocks with InnoDB transactions due to enforced commit order. If
T1 must commit before T2 in parallel replication and T1 ends up waiting for T2
inside InnoDB, we kill T2 and retry it later to resolve the deadlock
automatically.
Fix a bug discovered in Buildbot valgrind. The logic in checking for slave
init thread completion was reversed, so depending on thread scheduling server
startup could hang.
Also add another variant of SSL valgrind suppression, needed for different
library version.
After-review changes.
For this patch in 10.0, we do not introduce a new public storage engine API,
we just fix the InnoDB/XtraDB issues. In 10.1, we will make a better public
API that can be used for all storage engines (MDEV-6429).
Eliminate the background thread that did deadlock kills asynchroneously.
Instead, we ensure that the InnoDB/XtraDB code can handle doing the kill from
inside the deadlock detection code (when thd_report_wait_for() needs to kill a
later thread to resolve a deadlock).
(We preserve the part of the original patch that introduces dedicated mutex
and condition for the slave init thread, to remove the abuse of
LOCK_thread_count for start/stop synchronisation of the slave init thread).
The sql_slave_skip_counter is important to be able to recover replication from
certain errors. Often, an appropriate solution is to set
sql_slave_skip_counter to skip over a problem event. But setting
sql_slave_skip_counter produced an error in GTID mode, with a suggestion to
instead set @@gtid_slave_pos to point past the problem event. This however is
not always possible; for example, in case of an INCIDENT event, that event
does not have any GTID to assign to @@gtid_slave_pos.
With this patch, sql_slave_skip_counter now works in GTID mode the same was as
in non-GTID mode. When set, that many initial events are skipped when the SQL
thread starts, plus as many extra events are needed to completely skip any
partially skipped event group. The GTID position is updated to point past the
skipped event(s).
If replication breaks in GTID mode, it is not trivial to determine the GTID of
the failing event group. This is a problem, as such GTID is needed eg. to
explicitly set @@gtid_slave_pos to skip to after that event group, or to
compare errors on different servers, etc.
Fix by ensuring that relevant slave errors logged to the error log include the
GTID of the event group containing the problem event.
Preserve CLIENT_REMEMBER_OPTIONS flag for compressed connections
Code cleanup: removed reference to CLIENT_REMEMBER_OPTIONS from server
code. This flag is ignored in MariaDB.
That particular part of slave connect to master was missing code to handle
retry in case of network errors. The same problem is present in MySQL 5.5, but
fixed in MySQL 5.6.
Fixed with this patch, by adding the code (mostly identical to MySQL 5.6), and
also adding a test case.
I checked other queries done towards master during slave connect, and they now
all seem to handle reconnect in case of network failures.
replication causing replication to fail.
Remove the temporary fix for MDEV-5914, which used READ COMMITTED for parallel
replication worker threads. Replace it with a better, more selective solution.
The issue is with certain edge cases of InnoDB gap locks, for example between
INSERT and ranged DELETE. It is possible for the gap lock set by the DELETE to
block the INSERT, if the DELETE runs first, while the record lock set by
INSERT does not block the DELETE, if the INSERT runs first. This can cause a
conflict between the two in parallel replication on the slave even though they
ran without conflicts on the master.
With this patch, InnoDB will ask the server layer about the two involved
transactions before blocking on a gap lock. If the server layer tells InnoDB
that the transactions are already fixed wrt. commit order, as they are in
parallel replication, InnoDB will ignore the gap lock and allow the two
transactions to proceed in parallel, avoiding the conflict.
Improve the fix for MDEV-6020. When InnoDB itself detects a deadlock, it now
asks the server layer for any preferences about which transaction to roll
back. In case of parallel replication with two transactions T1 and T2 fixed to
commit T1 before T2, the server layer will ask InnoDB to roll back T2 as the
deadlock victim, not T1. This helps in some cases to avoid excessive deadlock
rollback, as T2 will in any case need to wait for T1 to complete before it can
itself commit.
Also some misc. fixes found during development and testing:
- Remove thd_rpl_is_parallel(), it is not used or needed.
- Use KILL_CONNECTION instead of KILL_QUERY when a parallel replication
worker thread is killed to resolve a deadlock with fixed commit
ordering. There are some cases, eg. in sql/sql_parse.cc, where a KILL_QUERY
can be ignored if the query otherwise completed successfully, and this
could cause the deadlock kill to be lost, so that the deadlock was not
correctly resolved.
- Fix random test failure due to missing wait_for_binlog_checkpoint.inc.
- Make sure that deadlock or other temporary errors during parallel
replication are not printed to the the error log; there were some places
around the replication code with extra error logging. These conditions can
occur occasionally and are handled automatically without breaking
replication, so they should not pollute the error log.
- Fix handling of rgi->gtid_sub_id. We need to be able to access this also at
the end of a transaction, to be able to detect and resolve deadlocks due to
commit ordering. But this value was also used as a flag to mark whether
record_gtid() had been called, by being set to zero, losing the value. Now,
introduce a separate flag rgi->gtid_pending, so rgi->gtid_sub_id remains
valid for the entire duration of the transaction.
- Fix one place where the code to handle ignored errors called reset_killed()
unconditionally, even if no error was caught that should be ignored. This
could cause loss of a deadlock kill signal, breaking deadlock detection and
resolution.
- Fix a couple of missing mysql_reset_thd_for_next_command(). This could
cause a prior error condition to remain for the next event executed,
causing assertions about errors already being set and possibly giving
incorrect error handling for following event executions.
- Fix code that cleared thd->rgi_slave in the parallel replication worker
threads after each event execution; this caused the deadlock detection and
handling code to not be able to correctly process the associated
transactions as belonging to replication worker threads.
- Remove useless error code in slave_background_kill_request().
- Fix bug where wfc->wakeup_error was not cleared at
wait_for_commit::unregister_wait_for_prior_commit(). This could cause the
error condition to wrongly propagate to a later wait_for_prior_commit(),
causing spurious ER_PRIOR_COMMIT_FAILED errors.
- Do not put the binlog background thread into the processlist. It causes
too many result differences in mtr, but also it probably is not useful
for users to pollute the process list with a system thread that does not
really perform any user-visible tasks...
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
Handle retry of event groups that span multiple relay log files.
- If retry reaches the end of one relay log file, move on to the next.
- Handle refcounting of relay log files, and avoid purging relay log
files until all event groups have completed that might have needed
them for transaction retry.
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
Start implementing that an event group can be re-tried in parallel replication
if it fails with a temporary error (like deadlock).
Patch is very incomplete, just some very basic retry works.
Stuff still missing (not complete list):
- Handle moving to the next relay log file, if event group to be retried
spans multiple relay log files.
- Handle refcounting of relay log files, to ensure that we do not purge a
relay log file and then later attempt to re-execute events out of it.
- Handle description_event_for_exec - we need to save this somehow for the
possible retry - and use the correct one in case it differs between relay
logs.
- Do another retry attempt in case the first retry also fails.
- Limit the max number of retries.
- Lots of testing will be needed for the various edge cases.
The previous patch for this bug was unfortunately completely wrong.
The purpose of cached_charset is to remember which character set we
have installed currently in the THD, so that in the common case where
charset does not change between queries, we do not need to update it
in the THD. Thus, it is important that the cached_charset field is
tightly coupled to the THD for which it handles caching.
Thus the right place to put cached_charset seems to be in the THD.
This patch introduces a field THD:system_thread_info where such info
in general can be placed without further inflating the THD with unused
data for other threads (THD is already far too big as it is). It then
moves the cached_charset into this slot for the SQL driver thread and
for the parallel replication worker threads.
The THD::rpl_filter field is also moved inside system_thread_info, to
keep the size of THD unchanged. Moving further fields in to reduce the
size of THD is a separate task, filed as MDEV-6164.
Replication caches the character sets used in a query, to be able to quickly
reuse them for the next query in the common case of them not having changed.
In parallel replication, this caching needs to be per-worker-thread. The
code was not modified to handle this correctly, so the caching in one worker
could cause another worker to run a query using the wrong character set,
causing replication corruption.
We need to use mysql_cond_broadcast() rather than _signal for
COND_thread_count, as there can be multiple waiters.
Thanks to Pavel Ivanov for reporting both the problem and the
solution.
Reason for the bug was an optimization for higher connect speed where we moved when global status was updated,
but forgot to update states when slave thread dies.
Fixed by adding thd->add_status_to_global() before deleting slave thread's thd.
mysys/my_delete.c:
Added missing newline
sql/mysqld.cc:
Use add_status_to_global()
sql/slave.cc:
Added missing add_status_to_global()
sql/sql_class.cc:
Use add_status_to_global()
sql/sql_class.h:
Simplify adding local status to global by adding add_status_to_global()
Before, the arrival of same GTID twice in multi-source replication
would cause double-apply or in gtid strict mode an error.
Keep the behaviour, but add an option --gtid-ignore-duplicates which
allows to correctly handle duplicates, ignoring all but the first.
This relies on the user ensuring correct configuration so that
sequence numbers are strictly increasing within each replication
domain; then duplicates can be detected simply by comparing the
sequence numbers against what is already applied.
Only one master connection (but possibly multiple parallel worker
threads within that connection) is allowed to apply events within
one replication domain at a time; any other connection that
receives a GTID in the same domain either discards it (if it is
already applied) or waits for the other connection to not have
any events to apply.
Intermediate patch, as proof-of-concept for testing. The main limitation
is that currently it is only implemented for parallel replication,
@@slave_parallel_threads > 0.
Older master has no GTID events, so such events are not available for
deciding on scheduling of event groups and so on.
With this patch, we run such events from old masters single-threaded, in the
sql driver thread.
This seems better than trying to make the parallel code handle the data from
older masters; while possible, this would require a lot of testing (as well as
possibly some extra overhead in the scheduling of events), which hardly seems
worthwhile.
With parallel replication, there can be any number of events queued on
in-memory lists in the worker threads.
For normal STOP SLAVE, we want to skip executing any remaining events on those
lists and stop as quickly as possible.
However, for START SLAVE UNTIL, when the UNTIL position is reached in the SQL
driver thread, we must _not_ stop until all already queued events for the
workers have been executed - otherwise we would stop too early, before the
actual UNTIL position had been completely reached.
The code did not handle UNTIL correctly, stopping too early due to not
executing the queued events to completion. Fix this, and also implement that
an explicit STOP SLAVE in the middle (when the SQL driver thread has reached
the UNTIL position but the workers have not) _will_ cause an immediate stop.
Clean up and improve the parallel implementation code, mainly related to
scheduling of work to threads and handling of stop and errors.
Fix a lot of bugs in various corner cases that could lead to crashes or
corruption.
Fix that a single replication domain could easily grab all worker threads and
stall all other domains; now a configuration variable
--slave-domain-parallel-threads allows to limit the number of
workers.
Allow next event group to start as soon as previous group begins the commit
phase (as opposed to when it ends it); this allows multiple event groups on
the slave to participate in group commit, even when no other opportunities for
parallelism are available.
Various fixes:
- Fix some races in the rpl.rpl_parallel test case.
- Fix an old incorrect assertion in Log_event iocache read.
- Fix repeated malloc/free of wait_for_commit and rpl_group_info objects.
- Simplify wait_for_commit wakeup logic.
- Fix one case in queue_for_group_commit() where killing one thread would
fail to correctly signal the error to the next, causing loss of the
transaction after slave restart.
- Fix leaking of pthreads (and their allocated stack) due to missing
PTHREAD_CREATE_DETACHED attribute.
- Fix how one batch of group-committed transactions wait for the previous
batch before starting to execute themselves. The old code had a very
complex scheduling where the first transaction was handled differently,
with subtle bugs in corner cases. Now each event group is always scheduled
for a new worker (in a round-robin fashion amongst available workers).
Keep a count of how many transactions have started to commit, and wait for
that counter to reach the appropriate value.
- Fix slave stop to wait for all workers to actually complete processing;
before, the wait was for update of last_committed_sub_id, which happens a
bit earlier, and could leave worker threads potentially accessing bits of
the replication state that is no longer valid after slave stop.
- Fix a couple of places where the test suite would kill a thread waiting
inside enter_cond() in connection with debug_sync; debug_sync + kill can
crash in rare cases due to a race with mysys_var_current_mutex in this
case.
- Fix some corner cases where we had enter_cond() but no exit_cond().
- Fix that we could get failure in wait_for_prior_commit() but forget to flag
the error with my_error().
- Fix slave stop (both for normal stop and stop due to error). Now, at stop
we pick a specific safe point (in terms of event groups executed) and make
sure that all event groups before that point are executed to completion,
and that no event group after start executing; this ensures a safe place to
restart replication, even for non-transactional stuff/DDL. In error stop,
make sure that all prior event groups are allowed to execute to completion,
and that any later event groups that have started are rolled back, if
possible. The old code could leave eg. T1 and T3 committed but T2 not, or
it could even leave half a transaction not rolled back in some random
worker, which would cause big problems when that worker was later reused
after slave restart.
- Fix the accounting of amount of events queued for one worker. Before, the
amount was reduced immediately as soon as the events were dequeued (which
happens all at once); this allowed twice the amount of events to be queued
in memory for each single worker, which is not what users would expect.
- Fix that an error set during execution of one event was sometimes not
cleared before executing the next, causing problems with the error
reporting.
- Fix incorrect handling of thd->killed in worker threads.
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
- CREATE TABLE is by default executed on the slave as CREATE OR REPLACE
- DROP TABLE is by default executed on the slave as DROP TABLE IF NOT EXISTS
This means that a slave will by default continue even if we try to create
a table that existed on the slave (the table will be deleted and re-created) or
if we try to drop a table that didn't exist on the slave.
This should be safe as instead of having the slave stop because of an inconsistency between
master and slave, it will fix the inconsistency.
Those that would prefer to get a stopped slave instead for the above cases can set slave_ddl_exec_mode to STRICT.
- Ensure that a CREATE OR REPLACE TABLE which dropped a table is replicated
- DROP TABLE that generated an error on master is handled as an identical DROP TABLE on the slave (IF NOT EXISTS is not added in this case)
- Added slave_ddl_exec_mode variable to decide how DDL's are replicated
New logic for handling BEGIN GTID ... COMMIT from the binary log:
- When we find a BEGIN GTID, we start a transaction and set OPTION_GTID_BEGIN
- When we find COMMIT, we reset OPTION_GTID_BEGIN and execute the normal COMMIT code.
- While OPTION_GTID_BEGIN is set:
- We don't generate implict commits before or after statements
- All tables are regarded as transactional tables in the binary log (to ensure things are executed exactly as on the master)
- We reset OPTION_GTID_BEGIN also on rollback
This will help ensuring that we don't get any sporadic commits (and thus new GTID's) on the slave and will help keep the GTID's between master and slave in sync.
mysql-test/extra/rpl_tests/rpl_log.test:
Added testing of mode slave_ddl_exec_mode=STRICT
mysql-test/r/mysqld--help.result:
New help messages
mysql-test/suite/rpl/r/create_or_replace_mix.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_row.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_statement.result:
Testing replication of create or replace
mysql-test/suite/rpl/r/rpl_gtid_startpos.result:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/r/rpl_row_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result
mysql-test/suite/rpl/t/create_or_replace.inc:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/rpl_gtid_startpos.test:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/t/rpl_stm_log.test:
Removed some lines
mysql-test/suite/sys_vars/r/slave_ddl_exec_mode_basic.result:
Testing of slave_ddl_exec_mode
mysql-test/suite/sys_vars/t/slave_ddl_exec_mode_basic.test:
Testing of slave_ddl_exec_mode
sql/handler.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
This is to ensure that statments are not commited too early if non transactional tables are used.
sql/log.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
Also treat 'direct' log events as transactional (to get them logged as they where on the master)
sql/log_event.cc:
Ensure that the new error from DROP TABLE when trying to drop a view is treated same as the old one.
Store error code that slave expects in THD.
Set OPTION_GTID_BEGIN if we find a BEGIN.
Reset OPTION_GTID_BEGIN if we find a COMMIT.
sql/mysqld.cc:
Added slave_ddl_exec_mode_options
sql/mysqld.h:
Added slave_ddl_exec_mode_options
sql/rpl_gtid.cc:
Reset OPTION_GTID_BEGIN if we record a gtid (safety)
sql/sql_class.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
sql/sql_class.h:
Added to THD: log_current_statement and slave_expected_error
sql/sql_insert.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
Don't do implicit commit for CREATE if we are under OPTION_GTID_BEGIN
sql/sql_parse.cc:
Change CREATE TABLE -> CREATE OR REPLACE TABLE for slaves
Change DROP TABLE -> DROP TABLE IF EXISTS for slaves
CREATE TABLE doesn't force implicit commit in case of OPTION_GTID_BEGIN
Don't do commits before or after any statement if OPTION_GTID_BEGIN was set.
sql/sql_priv.h:
Added OPTION_GTID_BEGIN
sql/sql_show.cc:
Enhanced store_create_info() to also be able to handle CREATE OR REPLACE
sql/sql_show.h:
Updated prototype
sql/sql_table.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
sql/sys_vars.cc:
Added slave_ddl_exec_mode
sql/transaction.cc:
Added warning if we got a GTID under OPTION_GTID_BEGIN
Using CREATE OR REPLACE TABLE is be identical to
DROP TABLE IF EXISTS table_name;
CREATE TABLE ...;
Except that:
* CREATE OR REPLACE is be atomic (now one can create the same table between drop and create).
* Temporary tables will not shadow the table name for the DROP as the CREATE TABLE tells us already if we are using a temporary table or not.
* If the table was locked with LOCK TABLES, the new table will be locked with the same lock after it's created.
Implementation details:
- We don't anymore open the to-be-created table during CREATE TABLE, which the original code did.
- There is no need to open a table we are planning to create. It's enough to check if the table exists or not.
- Removed some of duplicated code for CREATE IF NOT EXISTS.
- Give an error when using CREATE OR REPLACE with IF NOT EXISTS (conflicting options).
- As a side effect of the code changes, we don't anymore have to internally re-prepare prepared statements with CREATE TABLE if the table exists.
- Made one code path for all testing if log table are in use.
- Better error message if one tries to create/drop/alter a log table in use
- Added back disabled rpl_row_create_table test as it now seams to work and includes a lot of interesting tests.
- Added HA_LEX_CREATE_REPLACE to mark if we are using CREATE OR REPLACE
- Aligned CREATE OR REPLACE parsing code in sql_yacc.yy for TABLE and VIEW
- Changed interface for drop_temporary_table() to make it more reusable
- Changed Locked_tables_list::init_locked_tables() to work on the table object instead of the table list object. Before this it used a mix of both, which was not good.
- Locked_tables_list::unlock_locked_tables(THD *thd) now requires a valid thd argument. Old usage of calling this with 0 i changed to instead call Locked_tables_list::reset()
- Added functions Locked_tables_list:restore_lock() and Locked_tables_list::add_back_last_deleted_lock() to be able to easily add back a locked table to the lock list.
- Added restart_trans_for_tables() to be able to restart a transaction.
- DROP_ACL is required if one uses CREATE TABLE OR REPLACE.
- Added drop of normal and temporary tables in create_table_imp() if CREATE OR REPLACE was used.
- Added reacquiring of table locks in mysql_create_table() and mysql_create_like_table()
mysql-test/include/commit.inc:
With new code we get fewer status increments
mysql-test/r/commit_1innodb.result:
With new code we get fewer status increments
mysql-test/r/create.result:
Added testing of create or replace with timeout
mysql-test/r/create_or_replace.result:
Basic testing of CREATE OR REPLACE TABLE
mysql-test/r/partition_exchange.result:
New error message
mysql-test/r/ps_ddl.result:
Fewer reprepares with new code
mysql-test/suite/archive/discover.result:
Don't rediscover archive tables if the .frm file exists
(Sergei will look at this if there is a better way...)
mysql-test/suite/archive/discover.test:
Don't rediscover archive tables if the .frm file exists
(Sergei will look at this if there is a better way...)
mysql-test/suite/funcs_1/r/innodb_views.result:
New error message
mysql-test/suite/funcs_1/r/memory_views.result:
New error message
mysql-test/suite/rpl/disabled.def:
rpl_row_create_table should now be safe to use
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Updated results after adding back disabled test
mysql-test/suite/rpl/t/rpl_create_if_not_exists.test:
Added comment
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Added CREATE OR REPLACE TABLE test
mysql-test/t/create.test:
Added CREATE OR REPLACE TABLE test
mysql-test/t/create_or_replace-master.opt:
Create logs
mysql-test/t/create_or_replace.test:
Basic testing of CREATE OR REPLACE TABLE
mysql-test/t/partition_exchange.test:
Error number changed as we are now using same code for all log table change issues
mysql-test/t/ps_ddl.test:
Fewer reprepares with new code
sql/handler.h:
Moved things around a bit in a structure to get better alignment.
Added HA_LEX_CREATE_REPLACE to mark if we are using CREATE OR REPLACE
Added 3 elements to end of HA_CREATE_INFO to be able to store state to add backs locks in case of LOCK TABLES.
sql/log.cc:
Reimplemented check_if_log_table():
- Simpler and faster usage
- Can give error messages
This gives us one code path for allmost all error messages if log tables are in use
sql/log.h:
New interface for check_if_log_table()
sql/slave.cc:
More logging
sql/sql_alter.cc:
New interface for check_if_log_table()
sql/sql_base.cc:
More documentation
Changed interface for drop_temporary_table() to make it more reusable
Changed Locked_tables_list::init_locked_tables() to work on the table object instead of the table list object. Before this it used a mix of both, which was not good.
Locked_tables_list::unlock_locked_tables(THD *thd) now requires a valid thd argument. Old usage of calling this with 0 i changed to instead call Locked_tables_list::reset()
Added functions Locked_tables_list:restore_lock() and Locked_tables_list::add_back_last_deleted_lock() to be able to easily add back a locked table to the lock list.
Check for command number instead of open_strategy of CREATE TABLE was used.
Added restart_trans_for_tables() to be able to restart a transaction. This was needed in "create or replace ... select" between the drop table and the select.
sql/sql_base.h:
Added and updated function prototypes
sql/sql_class.h:
Added new prototypes to Locked_tables_list class
Added extra argument to select_create to avoid double call to eof() or send_error()
- I needed this in some edge case where the table was not created against expections.
sql/sql_db.cc:
New interface for check_if_log_table()
sql/sql_insert.cc:
Remember position to lock information so that we can reaquire table lock for LOCK TABLES + CREATE OR REPLACE TABLE SELECT. Later add back the lock by calling restore_lock().
Removed one not needed indentation level in create_table_from_items()
Ensure we don't call send_eof() or abort_result_set() twice.
sql/sql_lex.h:
Removed variable that I temporarly added in an earlier changeset
sql/sql_parse.cc:
Removed old test code (marked with QQ)
Ensure that we have open_strategy set as TABLE_LIST::OPEN_STUB in CREATE TABLE
Removed some IF NOT EXISTS code as this is now handled in create_table_table_impl().
Set OPTION_KEEP_LOGS later. This code had to be moved as the test for IF EXISTS has changed place.
DROP_ACL is required if one uses CREATE TABLE OR REPLACE.
sql/sql_partition_admin.cc:
New interface for check_if_log_table()
sql/sql_rename.cc:
New interface for check_if_log_table()
sql/sql_table.cc:
New interface for check_if_log_table()
Moved some code in mysql_rm_table() under a common test.
- Safe as temporary tables doesn't have statistics.
- !is_temporary_table(table) test was moved out from drop_temporary_table() and merged with upper level code.
- Added drop of normal and temporary tables in create_table_imp() if CREATE OR REPLACE was used.
- Added reacquiring of table locks in mysql_create_table() and mysql_create_like_table()
- In mysql_create_like_table(), restore table->open_strategy() if it was changed.
- Re-test if table was a view after opening it.
sql/sql_table.h:
New prototype for mysql_create_table_no_lock()
sql/sql_yacc.yy:
Added syntax for CREATE OR REPLACE TABLE
Reuse new code for CREATE OR REPLACE VIEW
sql/table.h:
Added name for enum type
sql/table_cache.cc:
More DBUG
The problem was a race between the SQL driver thread and the worker threads.
The SQL driver thread would set rli->last_master_timestamp to zero to
mark that it has caught up with the master, while the worker threads would
set it to the timestamp of the executed event. This can happen out-of-order
in parallel replication, causing the "caught up" status to be overwritten
and Seconds_Behind_Master to wrongly grow when the slave is idle.
To fix, introduce a separate flag rli->sql_thread_caught_up to mark that the
SQL driver thread is caught up. This avoids issues with worker threads
overwriting the SQL driver thread status. In parallel replication, we then
make SHOW SLAVE STATUS check in addition that all worker threads are idle
before showing Seconds_Behind_Master as 0 due to slave idle.
This solves the issue of getting a lot of unnecessary errors logged on the slave when connecting to MySQL or an old MariaDB version.
sql/slave.cc:
Don't write that binlog_checksum doesn't exists on the master if log_warnings <= 1
- Added MALLOC_LIBRARY variable to hold name of malloc library
- Back ported valgrind related fixes from jemalloc 3.4.1 to the included jemalloc 3.3.1
- Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
- Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
- Show version related variables in mysqld --help
-- Added SHOW_VALUE_IN_HELP marker
Increased back_log to 150 as the original value was a bit too small
CMakeLists.txt:
Added MALLOC_LIBRARY variable to hold name of malloc library
cmake/jemalloc.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
config.h.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
extra/jemalloc/ChangeLog:
Updates changelog
extra/jemalloc/include/jemalloc/internal/arena.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/jemalloc_internal.h.in:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/private_namespace.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/tcache.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/src/arena.c:
Backported valgrind fixes from jemalloc 3.4.1
include/my_bitmap.h:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
mysql-test/mysql-test-run.pl:
Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
mysql-test/valgrind.supp:
Supression of memory leak in OpenSuse 12.3
mysys/my_bitmap.c:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free()
sql/ha_ndbcluster_binlog.cc:
Renames
sql/ha_ndbcluster_cond.h:
Renames
sql/ha_partition.cc:
Renames
sql/handler.cc:
Renames
sql/item_subselect.cc:
Renames
sql/log_event.cc:
Renames
sql/log_event_old.cc:
Renames
sql/mysqld.cc:
Renames
Show version related variables in mysqld --help
sql/opt_range.cc:
Renames
sql/opt_table_elimination.cc:
Renames
sql/partition_info.cc:
Renames
sql/rpl_injector.h:
Renames
sql/set_var.h:
Renames
sql/slave.cc:
Renames
sql/sql_bitmap.h:
Renames
sql/sql_insert.cc:
Renames
sql/sql_lex.h:
Renames
sql/sql_parse.cc:
Renames
sql/sql_partition.cc:
Renames
sql/sql_select.cc:
Renames
sql/sql_show.cc:
Renames
sql/sql_update.cc:
Renames
sql/sys_vars.cc:
Show version related variables in mysqld --help
sql/sys_vars.h:
Added SHOW_VALUE_IN_HELP marker for variables that should be shown in --help
sql/table.cc:
Renames
sql/table.h:
Removed not used bitmap_init_value
storage/connect/ha_connect.cc:
Removed compiler warning
storage/maria/ma_open.c:
Renames
unittest/mysys/bitmap-t.c:
Renames
Fix locking bug / race introduced by previous patch: If we
bail out of next_event() due to kill, there was a small window
where we could exit without rli->data_lock held, causing an
unlock-twice bug.
Add a test case for killing a waiting query in parallel replication.
Fix several bugs found:
- We should not wakeup_subsequent_commits() in ha_rollback_trans(), since we
do not know the right wakeup_error() to give.
- When a wait_for_prior_commit() is killed, we must unregister from the
waitee so we do not race and get an extra (non-kill) wakeup.
- We need to deal with error propagation correctly in queue_for_group_commit
when one thread is killed.
- Fix one locking issue in queue_for_group_commit(), we could unlock the
waitee lock too early and this end up processing wakeup() with insufficient
locking.
- Fix Xid_log_event::do_apply_event; if commit fails it must not update the
in-memory @@gtid_slave_pos state.
- Fix and cleanup some things in the rpl_parallel.cc error handling.
- Add a missing check for killed in the slave sql driver thread, to avoid a
race.
This was actually implemented as part of MDEV-4506, parallel replication.
Unfortunately, one of the conditionals was reversed. So fsync of master.info
was disabled in non-gtid mode, instead of in gtid mode.
So fix the conditional to be correct.
fix the code to compile with clang. fix warnings too.
include/probes_mysql_nodtrace.h:
clang++ doesn't like numeric _constants_ being used in ||
(it suspects that the intention was | ). Boolean constants are ok.
sql/hostname.cc:
only used in DBUG_ASSERT
sql/item.cc:
str_to_time and str_to_datetime return bool, not MYSQL_TIMESTAMP_xxx
sql/item_func.cc:
str_to_datetime_with_warn() returns bool, not MYSQL_TIMESTAMP_xxx
storage/cassandra/CMakeLists.txt:
CMAKE_CXX_FLAGS can be empty
storage/connect/odbconn.cpp:
HWND is void*
storage/connect/user_connect.h:
deprecated on FreeBSD and unused anyway
storage/connect/value.cpp:
bad characters inside. unused.
storage/spider/spd_trx.cc:
clang++ warns that memset will also overwrite vtbl. it might be as well a good idea,
as it asserts that the object will only be used as a storage.
silence the warning.
MDEV-4725: Incorrect binlog state recovery if crash while writing event group
The binlog state was not recovered correctly if XA is not used (eg. InnoDB
disabled), or if server crashed in the middle of writing an event group to the
binlog.
With this patch, we ensure that recovery of binlog state is done even if we do
not do the full XA binlog recovery, and we ensure that we only recover fully
written event groups into the binlog state.
Fix access of freed memory in debug builds. When deleting serial_rgi,
safe_mutex was trying to access current_thd, when that thd had just been
deleted (I hate all this current_thd and other magic thread local storage crap
used all over the code). Now delete the serial_rgi before the thd.
MDEV-5217: Incorrect event pos update leading to corruption of reading of events from relay log
The rli->event_relay_log_pos was sometimes undated incorrectly when using
parallel replication, especially around relay log rotates. This could cause
the SQL thread to seek into an invalid position in the relay log, resulting in
errors about invalid events or even random corruption in some cases.
Updated --help text to declare --slave-parallel-threads as an alpha feature
mysql-test/r/mysqld--help.result:
Updated --help text
sql/slave.cc:
Added missing trans_retries++ that caused rpl_deadlock_innodb.test to fail.
This is safe as this part is never run in parallel.
sql/sql_base.cc:
Fixed temporary table handling (part of merge)
sql/sys_vars.cc:
Updated --help text to declare --slave-parallel-threads as an alpha feature
The merge is still missing a few hunks related to temporary tables and
InnoDB log file size. The associated code did not seem to exist in
10.0, so the merge of that needs more work. Until this is fixed, there
are a number of test failures as a result.
MDEV-5189: Error handling in parallel replication.
Fix error handling in parallel worker threads when a query fails:
- Report the error to the error log.
- Return the error back, and set rli->abort_slave.
- Stop executing more events after the error.
Do not update relay-log.info and master.info on disk after every event
when using GTID mode:
- relay-log.info and master.info are not crash-safe, and are not used
when slave restarts in GTID mode (slave connects with GTID position
instead and immediately rewrites the file with the new, correct
information found).
- When using GTID and parallel replication, the position in
relay-log.info is misleading at best and simply wrong at worst.
- When using parallel replication, the fact that every single
transaction needs to do a write() syscall to the same file is
likely to become a serious bottleneck.
The files are still written at normal slave stop.
In non-GTID mode, the files are written as normal (this is needed to
be able to restart after slave crash, even if such restart is then not
crash-safe, no change).
Fix some more parts of old-style position updates.
Now we save in rgi some coordinates for master log and relay log, so
that in do_update_pos() we can use the right set of coordinates with
the right events.
The Rotate_log_event::do_update_pos() is fixed in the parallel case
to not directly update relay-log.info (as Rotate event runs directly
in the driver SQL thread, ahead of actual event execution). Instead,
group_master_log_file is updated as part of do_update_pos() in each
event execution.
In the parallel case, position updates happen in parallel without
any ordering, but taking care that position is not updated backwards.
Since position update happens only after event execution this leads
to the right result.
Also fix an access-after-free introduced in an earlier commit.
Fix some part of update of old-style coordinates in parallel replication:
- Ignore XtraDB request for old-style coordinates, not meaningful for
parallel replication (must use GTID to get crash-safe parallel slave).
- Only update relay log coordinates forward, not backwards, to ensure
that parallel threads do not conflict with each other.
- Move future_event_relay_log_pos to rgi.
-row_stmt_start_timestamp
-last_event_start_time
-long_find_row_note
-trans_retries
Added slave_executed_entries_lock to protect rli->executed_entries
Added primitives for thread safe 64 bit increment
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
sql/log_event.cc:
row_stmt_start and long_find_row_note is now in rpl_group_info
sql/mysqld.cc:
Added slave_executed_entries_lock to protect rli->executed_entries
sql/mysqld.h:
Added slave_executed_entries_lock to protect rli->executed_entries
Added primitives for thread safe 64 bit increment
sql/rpl_parallel.cc:
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
sql/rpl_rli.cc:
Moved row_stmt_start_timestamp, last_event_start_time and long_find_row_note from Relay_log_info to rpl_group_info
sql/rpl_rli.h:
Moved trans_retries, row_stmt_start_timestamp, last_event_start_time and long_find_row_note from Relay_log_info to rpl_group_info
sql/slave.cc:
Use rgi for trans_retries and last_event_start_time
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
Reset trans_retries when object is created
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
Make IO thread check for end of event group, so that upon
disconnect at the end of an event group it can report the last
read GTID as expected. Also inject a fake Rotate event at
reconnect when skipping part of an initial event group, to
give SQL thread the correct Read_Master_Log_Pos.
Reported by Pavel Ivanov.
The ignored events are not written to the relay log, but instead a fake
Rotate event is generated to handle update of position.
Extend this for Gtid so we similarly generate a fake Gtid_list event
to update the GTID position.
Also fix an unrelated test issue that got triggered by the added test cases.
When a GTID event is executed, we remember the contained GTID position so that
when we have applied the entire event group we can commit it to
gtid_slave_pos.
However, if the event group fails to apply due to some error and the SQL
thread aborts, the code did not correctly clear the remembered GTID. Thus,
when SQL thread was restarted, the old GTID of the failing event group was
incorrectly updated to gtid_slave_pos when the initial rotate event was
executed, corrupting the GTID position.
Since log_throttle is not available in 5.5. Logging of
error message for failure of thread to create new connection
in "create_thread_to_handle_connection" is not backported.
Since, function "my_plugin_log_message" is not available in
5.5 version and since there is incompatibility between
sql_print_XXX function compiled with g++ and alog files with
gcc to use sql_print_error, changes related to audit log
plugin is not backported.
Since log_throttle is not available in 5.5. Logging of
error message for failure of thread to create new connection
in "create_thread_to_handle_connection" is not backported.
Since, function "my_plugin_log_message" is not available in
5.5 version and since there is incompatibility between
sql_print_XXX function compiled with g++ and alog files with
gcc to use sql_print_error, changes related to audit log
plugin is not backported.
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
Fix a bunch of issues found with locking, ordering, and non-thread-safe stuff
in Relay_log_info.
Now able to do a simple benchmark, showing 4.5 times speedup for applying a
binlog with 10000 REPLACE statements.
Fix some bugs around waiting for worker threads to end during SQL slave stop.
Free Log_event after parallel execution (still needs to be made thread-safe by
using rpl_group_info rather than rli).
Wait for all worker threads to finish when stopping the SQL thread.
(Only a basic wait; this still needs to be fixed to include timeout
logic as in sql_slave_killed()).
Hook in the wait-for-prior-commit logic (not really tested yet).
Clean up some resource maintenance around rpl_group_info (may still be some
smaller issues there though).
Add a ToDo list at the top of rpl_parallel.cc
Now whenever we reach the GTID point requested from the slave (when using GTID
position to connect), we send a fake Gtid_list event. This event is used by
the slave to know the current old-style position for MASTER_POS_WAIT(), and
later the similar binlog position for MASTER_GTID_WAIT().
Without this fake event, if the slave is already fully up-to-date with the
master, there may be no events sent at the given position for an indeterminate
time.
If the mysql.gtid_slave_pos table is not available, we cannot load nor update
the current GTID position persistently. This can happen eg. after an upgrade,
before mysql_upgrade_db is run, or if the table is InnoDB and the server is
restarted without the InnoDB storage engine enabled.
Before, replication always failed to start if the table was unavailable. With
this patch, we try to continue with old-style replication, after suitable
complaints in the error log. In strict mode, or if slave is configured to use
GTID, slave still refuses to start.
There was some old code that cleared the position in CHANGE MASTER,
it was forgotten to be removed.
In addition, add code that saves/restores the old-style position
when we nuke the old relay logs as part of GTID slave start.
Normally we will not use these, but it could be useful in case
the GTID connect fails and user wants to go back to the old-style
coordinates.
Fix problems related to reconnect. When we need to reconnect (ie. explict
stop/start of just the IO thread by user, or automatic reconnect due to
loosing network connection with the master), it is a bit complex to correctly
resume at the right point without causing duplicate or missing events in the
relay log. The previous code had multiple problems in this regard.
With this patch, the problem is solved as follows. The IO thread keeps track
(in memory) of which GTID was last queued to the relay log. If it needs to
reconnect, it resumes at that GTID position. It also counts number of events
received within the last, possibly partial, event group, and skips the same
number of events after a reconnect, so that events already enqueued before the
reconnect are not duplicated.
(There is no need to keep any persistent state; whenever we restart slave
threads after both of them being stopped (such as after server restart), we
erase the relay logs and start over from the last GTID applied by SQL thread.
But while the SQL thread is running, this patch is needed to get correct relay
log).
There were several cases where the slave GTID position was not loaded
correctly before being used. This caused various failures such as
corrupting the position at slave start and empty values of
@@gtid_slave_pos and @@gtid_current_pos.
Fixed by adding more checks for loaded position, and by always loading
the position at server startup.
When @@GLOBAL.gtid_strict_mode=1, then certain operations result
in error that would otherwise result in out-of-order binlog files
between servers.
GTID sequence numbers are now allocated independently per domain;
this results in less/no holes in GTID sequences, increasing the
likelyhood that diverging binlogs will be caught by the slave when
GTID strict mode is enabled.
bzr merge lp:maria/5.5 -rtag:mariadb-5.5.31
Text conflict in cmake/cpack_rpm.cmake
Text conflict in debian/dist/Debian/control
Text conflict in debian/dist/Ubuntu/control
Text conflict in sql/CMakeLists.txt
Conflict adding file sql/db.opt. Moved existing file to sql/db.opt.moved.
Conflict adding file sql/db.opt.moved. Moved existing file to sql/db.opt.moved.moved.
Text conflict in sql/mysqld.cc
Text conflict in support-files/mysql.spec.sh
8 conflicts encountered.
Change of user interface to be more logical and more in line with expectations
to work similar to old-style replication.
User can now explicitly choose in CHANGE MASTER whether binlog position is
taken into account (master_gtid_pos=current_pos) or not (master_gtid_pos=
slave_pos) when slave connects to master.
@@gtid_pos is replaced by three separate variables @@gtid_slave_pos (can
be set by user, replicated GTIDs only), @@gtid_binlog_pos (read only), and
@@gtid_current_pos (a combination of the two, most recent GTID within each
domain). mysql.rpl_slave_state is renamed to mysql.gtid_slave_pos to match.
This fixes MDEV-4474.
Implement START SLAVE UNTIL master_gtid_pos = "<GTID position>".
Add test cases, including a test showing how to use this to promote
a new master among a set of slaves.
- Calls to cleanup_load_tmpdir() could delete temporary files for another master connection
- Concurrent LOAD DATA commands from two master connections could use the same file name
Other bug fixes:
- Enlarge buffer for connection names with 'special characters' one can't store in filenames
Optimization:
- Don't do 'lower case' of connection names. We can use cmp_connection_name, where we already have the connection name in lower case.
mysql-test/suite/multi_source/load_data.result:
Test case for MDEV-4352
mysql-test/suite/multi_source/load_data.test:
Test case for MDEV-4352
sql/log_event.cc:
Fixed: MDEV-4352
- Calls to cleanup_load_tmpdir() could delete temporary files for another master connection
- Concurrent LOAD DATA commands from two master connections could use the same file name
The fix was to add the connection name (if one exists) to all slave temporary files used by LOAD DATA
sql/rpl_mi.cc:
Enlarge buffer for connection names with 'special characters' one can't store in filenames
Use mi->cmp_connection_name for connection file names.
sql/rpl_rli.cc:
Use mi->cmp_connection_name for connection file names.
sql/slave.cc:
Removed not needed empty line
sql/sql_const.h:
Added MAX_FILENAME_MBWIDTH to be able to calculate buffer length for connection_names stored in file names
sql/sql_repl.cc:
Use mi->cmp_connection_name for connection file names.
sql/keycaches.cc:
Added free_all_rpl_filters() to be able to free all filters at cleanup
sql/keycaches.h:
Added prototype
sql/rpl_rli.cc:
Fixed compiler warning
sql/slave.cc:
Free all rpl_filters at cleanup
sql/sp.cc:
Fixed compiler warning when not all struct elements was initialized
sql/sql_acl.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_events_waits.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_events_waits_summary.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_ews_global_by_event_name.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_file_instances.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_file_summary.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_performance_timers.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_setup_consumers.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_setup_instruments.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_setup_timers.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_sync_instances.cc:
Fixed compiler warning when not all struct elements was initialized
storage/perfschema/table_threads.cc:
Fixed compiler warning when not all struct elements was initialized
storage/xtradb/os/os0file.c:
Fixed compiler warning when not all struct elements was initialized
Users can set different repplication filter rules for each replication connection, in my.cnf or command line.
But the rules set online will not record in master.info, it means if users restart MySQL, these rules will lose.
So if users wantn't their replication filter rules lose, they should write the rules in my.cnf.
Users can set rules by 2 ways:
1. Online SET command, "SET connection_name.replication_filter_settings = rules;".
2. In my.cnf, "connection_name.replication_filter_settings = rules".
If no connection_name in my.cnf, this rule will apply for ALL replication connection.
If no connetion_name in SET statement, this rull will apply for default_connection_name.
Merge of 10.0-mdev26 feature tree into 10.0-base.
Global transaction ID is prepended to each event group in the binlog.
Slave connect can request to start from GTID position instead of specifying
file name/offset of master binlog. This facilitates easy switch to a new
master.
Slave GTID state is stored in a table mysql.rpl_slave_state, which can be
InnoDB to get crash-safe slave state.
GTID includes a replication domain ID, allowing to keep track of distinct
positions for each of multiple masters.
Fixed MDEV-4033 Unable to use slave's temporary directory /tmp - Can't create/write to file '/tmp/SQL_LOAD-' (Errcode: 17 "File exists")
- Cache value of check_temp_dir() to avoid race condition
- Set $rpl_server_count to avoid error in show_rpl_debug_info.inc
mysql-test/suite/multi_source/info_logs.test:
Set $rpl_server_count
mysql-test/suite/multi_source/multisource.test:
Set $rpl_server_count
mysql-test/suite/multi_source/relaylog_events.test:
Set $rpl_server_count
mysql-test/suite/multi_source/reset_slave.test:
Set $rpl_server_count
mysql-test/suite/multi_source/simple.test:
Set $rpl_server_count
mysql-test/suite/multi_source/skip_counter.test:
Set $rpl_server_count
mysql-test/suite/multi_source/status_vars.test:
Set $rpl_server_count
sql/slave.cc:
Cache value of check_temp_dir() to avoid race condition
