******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
mysql-test/r/signal.result:
Update result file:
1. handled conditions are not cleared any more;
2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
Update result file: handled conditions are not cleared any more.
Due to playing with max_error_count, resulting warning lists
have changed.
mysql-test/r/sp-big.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
Add a test case for Bug#23032 checking that
No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
Adding test cases for:
- Bug#23032
- Bug#36185
- Bug#5889
- Bug#9857
mysql-test/t/sp.test:
Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
Reset the per-statement warning count before executing
a stored procedure instruction.
Move to a separate function code which checks the
completion status of the executed statement and searches
for a handler.
Remove redundant code now that search for a handler is
done after execution, errors are always pushed.
sql/sp_pcontext.h:
Remove unused code.
sql/sp_rcontext.cc:
- Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
of an extra local variable;
- Remove sp_rcontext::handle_condition();
- Introduce sp_rcontext::activate_handler(), which prepares
previously found handler for execution.
- Move sp_rcontext::enter_handler() code into activate_handler(),
because enter_handler() is used only from there;
- Cleanups;
- Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
- Remove unused code
- Cleanups
sql/sql_class.cc:
Merge THD::raise_condition_no_handler() into THD::raise_condition().
After the patch raise_condition_no_handler() was called
in raise_condition() only.
sql/sql_class.h:
Remove raise_condition_no_handler().
sql/sql_error.cc:
Remove Warning_info::reserve_space() -- handled conditions are not
cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
Remove Warning_info::reserve_space().
sql/sql_signal.cc:
Handled conditions are not cleared any more,
so there is no need for RESIGNAL to re-push them.
DELETE statement
Single-table delete ordered by a field that has a hash-type index
may cause an assertion failure or a crash.
An optimization added by the fix for the bug 36569 forced the
optimizer to use ORDER BY-compatible indices when applicable.
However, the existence of unsorted indices (HASH index algorithm
for some engines such as MEMORY/HEAP, NDB) was ignored.
The test_if_order_by_key function has been modified to skip
unsorted indices.
mysql-test/r/heap_hash.result:
Test case for bug #55472.
mysql-test/t/heap_hash.test:
Test case for bug #55472.
sql/sql_select.cc:
Bug #55472: Assertion failed in heap_rfirst function of hp_rfirst.c on
DELETE statement
The test_if_order_by_key function has been modified to skip
unsorted indices.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
The problem was that the optimize method of the ARCHIVE storage
engine was not preserving the FRM embedded in the ARZ file when
rewriting the ARZ file for optimization. The ARCHIVE engine stores
the FRM in the ARZ file so it can be transferred from machine to
machine without also copying the FRM -- the engine restores the
embedded FRM during discovery.
The solution is to copy over the FRM when rewriting the ARZ file.
In addition, some initial error checking is performed to ensure
garbage is not copied over.
mysql-test/t/archive.test:
Add test case for Bug#45377.
storage/archive/azio.c:
Add error checking to ensure that the I/O operations are
successful.
storage/archive/ha_archive.cc:
Copy over the embedded FRM.
table copy".
This patch only adds test case as the bug itself was addressed
by Ramil's fix for bug 50946 "fast index creation still seems
to copy the table".
The first problem was that SHOW CREATE TRIGGER took a stronger metadata
lock than required. This caused the statement to be blocked when it was
not needed. For example, LOCK TABLE WRITE in one connection would block
SHOW CREATE TRIGGER in another connection.
Another problem was that a SHOW CREATE TRIGGER statement issued inside
a transaction did not release its metadata locks at the end of the
statement execution. This happened even if SHOW CREATE TRIGGER is an
information statement. The consequence was that SHOW CREATE TRIGGER
was able to block other connections from accessing the table
(e.g. using ALTER TABLE).
This patch fixes the problem by changing SHOW CREATE TRIGGER to take
a MDL_SHARED_HIGH_PRIO metadata lock similar to what is already done
for SHOW CREATE TABLE. The patch also changes SHOW CREATE TRIGGER to
explicitly release any metadata locks taken by the statement after
it completes.
Test case added to show_check.test.
concurrent SHOW CREATE
The problem was that a SHOW CREATE TABLE statement issued inside
a transaction did not release its metadata locks at the end of the
statement execution. This happened even if SHOW CREATE TABLE is an
information statement.
The consequence was that SHOW CREATE TABLE was able to block other
connections from accessing the table (e.g. using ALTER TABLE).
This patch fixes the problem by explicitly releasing any metadata
locks taken by SHOW CREATE TABLE after the statement completes.
Test case added to show_check.test.
SHOW DATABASES LIKE ... was not converting to lowercase on comparison as the
documentation is suggesting.
Fixed it to behave similarly to SHOW TABLES LIKE ... and updated the failing
on MacOSX lowercase_table2 test case.
table with active trx
Essentially, the problem is that InnoDB does a implicit commit
when a cursor (table handler) is unlocked/closed, creating
a dissonance between the transaction state within the server
layer and the storage engine layer. Theoretically, a statement
transaction can encompass several table instances in a similar
manner to a multiple statement transaction, hence it does not
make sense to limit a statement transaction to the lifetime of
the table instances (cursors) used within it.
Since this particular instance of the problem is only triggerable
on 5.1 and is masked on 5.5 due 2PC being skipped (assertion is in
the prepare phase of a 2PC), the solution (which is less risky) is
to explicitly end the transaction before the cached table is unlock
on rename table.
The patch is to be null merged into trunk.
mysql-test/include/commit.inc:
Fix counters, the binlog engine does not get involved anymore.
mysql-test/suite/innodb_plugin/r/innodb_bug54453.result:
Add test case result for Bug#54453
mysql-test/suite/innodb_plugin/t/innodb_bug54453.test:
Add test case for Bug#54453
sql/sql_table.cc:
End transaction as otherwise InnoDB will end it behind our backs.
This bug is a design flaw of the fix for the bug#33546. It assumed that an
item can be used only in one comparison context, but actually it isn't the
case. Item_cache_datetime is used to store result for MIX/MAX aggregate
functions. Because Arg_comparator always compares datetime values as INTs when
possible the Item_cache_datetime most time caches only INT value. But
since all datetime values has STRING result type MIN/MAX functions are asked
for a STRING value when the result is being sent to a client. The
Item_cache_datetime was designed to avoid conversions and get INT/STRING
values from an underlying item, but at the moment the values is asked
underlying item doesn't hold it anymore thus wrong result is returned.
Beside that MIN/MAX aggregate functions was wrongly initializing cached result
and this led to a wrong result.
The Item::has_compatible_context helper function is added. It checks whether
this and given items has the same comparison context or can be compared as
DATETIME values by Arg_comparator. The equality propagation optimization is
adjusted to take into account that items which being compared as DATETIME
can have different comparison contexts.
The Item_cache_datetime now converts cached INT value to a correct STRING
DATETIME value by means of number_to_datetime & my_TIME_to_str functions.
The Arg_comparator::set_cmp_context_for_datetime helper function is added.
It sets comparison context of items being compared as DATETIMEs to INT if
items will be compared as longlong.
The Item_sum_hybrid::setup function now correctly initializes its result
value.
In order to avoid unnecessary conversions Item_sum_hybrid now states that it
can provide correct longlong value if the item being aggregated can do it
too.
mysql-test/r/group_by.result:
Added a test case for the bug#49771.
sql/item.cc:
Bug#49771: Incorrect MIN/MAX for date/time values.
The equality propagation mechanism is adjusted to take into account that
items which being compared as DATETIME can have different comparison
contexts.
The Item_cache_datetime now converts cached INT value to a correct STRING
DATETIME/TIME value.
sql/item.h:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Item::has_compatible_context helper function is added. It checks whether
this and given items has the same comparison context or can be compared as
DATETIME values by Arg_comparator.
Added Item_cache::clear helper function.
sql/item_cmpfunc.cc:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Arg_comparator::set_cmp_func now sets the correct comparison context
for items being compared as DATETIME values.
sql/item_cmpfunc.h:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Arg_comparator::set_cmp_context_for_datetime helper function is added.
It sets comparison context of items being compared as DATETIMEs to INT if
items will be compared as longlong.
sql/item_sum.cc:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Item_sum_hybrid::setup function now correctly initializes its result
value.
sql/item_sum.h:
Bug#49771: Incorrect MIN/MAX for date/time values.
In order to avoid unnecessary conversions Item_sum_hybrid now states that it
can provide correct longlong value if the item being aggregated can do it
too.
This assert checks that the server does not try to send OK to the
client if there has been some error during processing. This is done
to make sure that the error is in fact sent to the client.
The problem was that view errors during processing of WHERE conditions
in UPDATE statements where not detected by the update code. It therefore
tried to send OK to the client, triggering the assert.
The bug was only noticeable in debug builds.
This patch fixes the problem by making sure that the update code
checks for errors during condition processing and acts accordingly.
and reverse() function
3 problems fixed :
1. The reported problem : caused by incorrect parsing of
the file as ucs data resulting in wrong length of the parsed
string. Fixed by truncating the invalid trailing bytes
(non-complete multibyte characters) when reading from the file
2. LOAD DATA when reading from a proper UCS2 file wasn't
recognizing the new line characters. Fixed by first looking
if a byte is a new line (or any other special) character before
reading it as a part of a multibyte character.
3. When using user variables to hold the column data in LOAD
DATA the character set of the user variable was set incorrectly
to the database charset. Fixed by setting it to the charset
specified by LOAD DATA (if any).
naming scheme for tests related to functions, rename analyse.test to
func_analyse.test (test for the ANALYSE() procedure). Avoids confusion
with the ANALYZE statement (tested in analyze.test).
The problem there is that HAVING condition evaluates const
parts of condition despite the condition has references
on aggregate functions. Table t1 became const tables
after make_join_statistics and table1.pk = 1, HAVING is
transformed into MAX(1) < 7 and taken away from HAVING.
The fix is to skip evaluation of HAVING conts parts if
HAVING condition has references on aggregate functions.
mysql-test/r/having.result:
test case
mysql-test/t/having.test:
test case
sql/sql_select.cc:
skip evaluation of HAVING conts parts if
HAVING condition has references on aggregate functions.
Problem: Item_str_ascii_func::val_str() did not set
charset of the returned value properly.
mysql-test/include/ctype_numconv.inc
mysql-test/r/ctype_binary.result
mysql-test/r/ctype_cp1251.result
mysql-test/r/ctype_latin1.result
mysql-test/r/ctype_ucs.result
- Adding tests
sql/item_strfunc.cc
- Adding initialization of charset
from mysql-next-mr-opt-backporting.
Bug#54515: Crash in opt_range.cc::get_best_group_min_max on
SELECT from VIEW with GROUP BY
When handling the grouping items in get_best_group_min_max, the
items need to be of type Item_field. In this bug, an ASSERT
triggered because the item used for grouping was an
Item_direct_view_ref (i.e., the group column is from a view).
The fix is to get the real_item since Item_ref* pointing to
Item_field is ok.
mysql-test/r/select.result:
Add test for BUG#54515
mysql-test/t/select.test:
Add test for BUG#54515
sql/opt_range.cc:
Get the real_item() when processing grouping items in
get_best_group_min_max.
Problem: sha2() reported its result as BINARY
Fix:
- Inheriting Item_func_sha2 from Item_str_ascii_func
- Setting max_length via fix_length_and_charset()
instead of direct assignment.
- Adding tests
Problem: Item_copy did not set "fixed", which resulted in DBUG_ASSERT in some cases.
Fix: adding initialization of the "fixed" member
Adding tests:
mysql-test/include/ctype_numconv.inc
mysql-test/r/ctype_binary.result
mysql-test/r/ctype_cp1251.result
mysql-test/r/ctype_latin1.result
mysql-test/r/ctype_ucs.result
Adding initialization of the "fixed" member:
sql/item.h
value and NO_ZERO_DATE
The problem was that a older version of the error path for a
failed admin statement relied upon a few error conditions being
met in order to access a table handler, the first one being that
the table object pointer was not NULL. Probably due to chance,
in all cases a table object was closed but the reference wasn't
reset, the other conditions didn't evaluate to true. With the
addition of a new check on the error path, the handler started
being dereferenced whenever it was not reset to NULL, causing
problems for code paths which closed the table but didn't reset
the reference.
The solution is to reset the reference whenever a admin statement
fails and the tables are closed.
mysql-test/r/partition_innodb.result:
Add test case result for Bug#54783
mysql-test/t/partition_innodb.test:
Add test case for Bug#54783
sql/sql_table.cc:
In case table recreate failed, set a appropriate result code.
Reset reference to a closed table object, otherwise the error
path might attempt to access it.
This assert checks that the server does not try to send EOF to the
client if there has been some error during processing. This to make
sure that the error is in fact sent to the client.
The problem was that any errors during processing of WHERE conditions
in HANDLER ... READ statements where not detected by the handler code.
The handler code therefore still tried to send EOF to the client,
triggering the assert. The bug was only noticeable in debug builds.
This patch fixes the problem by making sure that the handler code
checks for errors during condition processing and acts accordingly.
Merge up to sunny.bains@oracle.com-20100625081841-ppulnkjk1qlazh82 .
There are 8 more changesets in mysql-5.1-innodb, but PB2 shows a
failure for a test added in one of them. If that is resolved quickly
then those 8 more changesets will be merged too.
MERGE engine".
Backport the patch from 6.0 by Ingo Struewing:
revid:ingo.struewing@sun.com-20091028183659-6kmv1k3gdq6cpg4d
Bug#36171 - CREATE TEMPORARY TABLE and MERGE engine
In former MySQL versions, up to 5.1.23/6.0.4 it was possible to create
temporary MERGE tables with non-temporary MyISAM tables.
This has been changed in the mentioned version due to Bug 19627
(temporary merge table locking). MERGE children were locked through
the parent table. If the parent was temporary, it was not locked and
so the children were not locked either. Parallel use of the MyISAM
tables corrupted them.
Since 6.0.6 (WL 4144 - Lock MERGE engine children), the children are
locked independently from the parent. Now it is possible to allow
non-temporary children with a temporary parent. Even though the
temporary MERGE table itself is not locked, each non-temporary
MyISAM table is locked anyway.
NOTE: Behavior change: In 5.1.23/6.0.4 we prohibited non-temporary
children with a temporary MERGE table. Now we re-allow it.
An important side-effect is that temporary tables, which overlay
non-temporary MERGE children, overlay the children in the MERGE table.
mysql-test/r/merge.result:
Update results (Bug#36171).
mysql-test/r/merge_mmap.result:
Update results (Bug#36171).
mysql-test/t/merge.test:
Add tests for Bug#36171
mysql-test/t/merge_mmap.test:
Add tests for Bug#36171.
storage/myisammrg/ha_myisammrg.cc:
Changed constraint for temporary state of tables.
and a backport of relevant changes from the 6.0
version of the fix done by Ingo Struewing.
The bug itself was fixed by the patch for Bug#54811.
MyISAMMRG engine would try to use MMAP on its children
even on platforms that don't support it and even if
myisam_use_mmap option was off.
This lead to an infinite hang in INSERT ... SELECT into
a MyISAMMRG table when the destination MyISAM table
was also selected from.
A bug in duplicate detection fixed by 54811 was essential to
the hang - when a duplicate is detected, the optimizer
disables the use of memory mapped files, and it wasn't the case.
The patch below is also to not turn on MMAP on children tables
if myisam_use_mmap is off.
A test case is added to cover MyISAMMRG and myisam_use_mmap
option.
mysql-test/r/merge_mmap.result:
Result file - Bug#50788.
mysql-test/t/merge_mmap-master.opt:
An option file for the test for Bug#50788 -- use mmap.
mysql-test/t/merge_mmap.test:
Try INSERT ... SELECT into a merge table when myisam_use_mmap is on (Bug#50788).
storage/myisam/mi_statrec.c:
Fixed misinterpretation of the return value of my_b_read().
storage/myisammrg/ha_myisammrg.cc:
Skip HA_EXTRA_MMAP if MyISAM memory mapping is disabled.
with open HANDLER
Fixes a problem with schema.test visible using embedded server.
The HANDLER was not closed which caused the test to hang.
The problem was not visible if the test was run on a normal server
as the the handler there was implicitly closed by DATABASE DDL
statements doing Events::drop_schema_events().
with open HANDLER
Fixes problem which caused mdl_sync.test to fail on Solaris and
Windows due to path name differences in error messages in the
result file.
DATABASE with open HANDLER"
Remove LOCK_create_db, database name locks, and use metadata locks instead.
This exposes CREATE/DROP/ALTER DATABASE statements to the graph-based
deadlock detector in MDL, and paves the way for a safe, deadlock-free
implementation of RENAME DATABASE.
Database DDL statements will now take exclusive metadata locks on
the database name, while table/view/routine DDL statements take
intention exclusive locks on the database name. This prevents race
conditions between database DDL and table/view/routine DDL.
(e.g. DROP DATABASE with concurrent CREATE/ALTER/DROP TABLE)
By adding database name locks, this patch implements
WL#4450 "DDL locking: CREATE/DROP DATABASE must use database locks" and
WL#4985 "DDL locking: namespace/hierarchical locks".
The patch also changes code to use init_one_table() where appropriate.
The new lock_table_names() function requires TABLE_LIST::db_length to
be set correctly, and this is taken care of by init_one_table().
This patch also adds a simple template to help work with
the mysys HASH data structure.
Most of the patch was written by Konstantin Osipov.
