STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
The technical problem was that THD::user_var_events_alloc was reset to NULL
from a valid value when a stored program is executed during the PREPARE statement.
The user visible problem was that the server crashed if user issued a PREPARE
statement using some combination of stored functions and user variables.
The fix is to restore THD::user_var_events_alloc to the original value.
This is a minimal fix for 5.5.
More proper patch has been already implemented for 5.6+. It avoids
evaluation of stored functions for the PREPARE phase.
From the user point of view, this bug is a regression, introduced by the patch for WL2649
(Number-to-string conversions), revid: bar@mysql.com-20100211041725-ijbox021olab82nv
However, the code resetting THD::user_var_events_alloc exists even in 5.1.
The WL just changed the way arguments are converted to strings and the bug became visible.
Using too long table aliases in stored routines might
have caused server crashes.
Code in sp_head::merge_table_list() which is responsible
for collecting information about tables used in stored
routine was not aware of the fact that table alias might
have arbitrary length. I.e. it assumed that table alias
can't be longer than NAME_LEN bytes and allocated buffer
for a key identifying table accordingly.
This patch fixes the issue by ensuring that we use
dynamically allocated buffer for table key when table
alias is too long. By default stack based buffer is used
in which NAME_LEN bytes are reserved for table alias.
Analysis:
========================
sql_mode "NO_BACKSLASH_ESCAPES": When user want to use backslash as character input,
instead of escape character in a string literal then sql_mode can be set to
"NO_BACKSLASH_ESCAPES". With this mode enabled, backslash becomes an ordinary
character like any other.
SQL_MODE set applies to the current client session. And while creating the stored
procedure, MySQL stores the current sql_mode and always executes the stored
procedure in sql_mode stored with the Procedure, regardless of the server SQL
mode in effect when the routine is invoked.
In the scenario (for which bug is reported), the routine is created with
sql_mode=NO_BACKSLASH_ESCAPES. And routine is executed with the invoker sql_mode
is "" (NOT SET) by executing statement "call testp('Axel\'s')".
Since invoker sql_mode is "" (NOT_SET), the '\' in 'Axel\'s'(argument to function)
is considered as escape character and column "a" (of table "t1") values are
updated with "Axel's". The binary log generated for above update operation is as below,
set sql_mode=XXXXXX (for no_backslash_escapes)
update test.t1 set a= NAME_CONST('var',_latin1'Axel\'s' COLLATE 'latin1_swedish_ci');
While logging stored procedure statements, the local variables (params) used in
statements are replaced with the NAME_CONST(var_name, var_value) (Internal function)
(http://dev.mysql.com/doc/refman/5.6/en/miscellaneous-functions.html#function_name-const)
On slave, these logs are applied. NAME_CONST is parsed to get the variable and its
value. Since, stored procedure is created with sql_mode="NO_BACKSLASH_ESCAPES", the sql_mode
is also logged in. So that at slave this sql_mode is set before executing the statements
of routine. So at slave, sql_mode is set to "NO_BACKSLASH_ESCAPES" and then while
parsing NAME_CONST of string variable, '\' is considered as NON ESCAPE character
and parsing reported error for "'" (as we have only one "'" no backslash).
At slave, parsing was proper with sql_mode "NO_BACKSLASH_ESCAPES".
But above error reported while writing bin log, "'" (of Axel's) is escaped with
"\" character. Actually, all special characters (n, r, ', ", \, 0...) are escaped
while writing NAME_CONST for string variable(param, local variable) in bin log
Airrespective of "NO_BACKSLASH_ESCAPES" sql_mode. So, basically, the problem is
that logging string parameter does not take into account sql_mode value.
Fix:
========================
So when sql_mode is set to "NO_BACKSLASH_ESCAPES", escaping characters as
(n, r, ', ", \, 0...) should be avoided. To do so, added a check to not to
escape such characters while writing NAME_CONST for string variables in bin
log.
And when sql_mode is set to NO_BACKSLASH_ESCAPES, quote character "'" is
represented as ''.
http://dev.mysql.com/doc/refman/5.6/en/string-literals.html (There are several
ways to include quote characters within a string: )
mysql-test/r/sql_mode.result:
Added test case for Bug#12601974.
mysql-test/suite/binlog/r/binlog_sql_mode.result:
Appended result of test cases added for Bug#12601974.
mysql-test/suite/binlog/t/binlog_sql_mode.test:
Added test case for Bug#12601974.
mysql-test/t/sql_mode.test:
Appended result of test cases added for Bug#12601974.
------------------------------------------------------------
revno: 3258
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
branch nick: mysql-trunk-bug12663165
timestamp: Thu 2011-07-14 10:05:12 +0200
message:
Bug#12663165 SP DEAD CODE REMOVAL DOESN'T UNDERSTAND CONTINUE HANDLERS
When stored routines are loaded, a simple optimizer tries to locate
and remove dead code. The problem was that this dead code removal
did not work correctly with CONTINUE handlers.
If a statement triggers a CONTINUE handler, the following statement
will be executed after the handler statement has completed. This
means that the following statement is not dead code even if the
previous statement unconditionally alters control flow. This fact
was lost on the dead code removal routine, which ended up with
removing instructions that could have been executed. This could
then lead to assertions, crashes and generally bad behavior when
the stored routine was executed.
This patch fixes the problem by marking as live code all stored
routine instructions that are in the same scope as a CONTINUE handler.
Test case added to sp.test.
A buffer large enough to hold the query _plus_ some additional
data is allocated before parsing is started. The additional data
is used by the query cache, and consists of the name of the current
database and a set of flags.
When a packet containing multiple SQL statements is sent to the
server and one of the statements changes the current database
(a "USE <db>" statement), and the name of the new current database
is longer than of the previous, there is not enough space in the
buffer for the new name, and we write out over the buffer boundary.
The fix adds an extra field to store the number of bytes
allocated to the database name in the buffer. If the current
database name changes, and the new name is longer than the
previous one, we refuse to cache the query.
SET STATEMENT.
Server built with debug asserts, without debug crashes if a user tries
to run a stored procedure that constains query with subquery that include
either LIMIT or LIMIT OFFSET clauses.
The problem was that Item::fix_fields() was not called for the items
representing LIMIT or OFFSET clauses.
The solution is to call Item::fix_fields() right before evaluation in
st_select_lex_unit::set_limit().
mysql-test/r/sp.result:
Added testcase result for bug#12621017. Updated testcase result for
bug 11918.
mysql-test/t/sp.test:
Added testcase for bug#12621017. Addressed review comments for Bug 11918
(added tests for use LIMIT at stored function).
sql/item.h:
Addressed review comments for Bug 11918.
sql/share/errmsg-utf8.txt:
Addressed review comments for Bug 11918.
sql/sp_head.cc:
Addressed review comments for Bug 11918.
sql/sql_lex.cc:
Added call fix_fields() for item just before its evaluation.
sql/sql_yacc.yy:
Addressed review comments for Bug 11918.
SYNTAX TRIGGERS IN ANY WAY
Table with triggers which were using deprecated (5.0-only) syntax became
unavailable for any DML and DDL after upgrade to 5.1 version of server.
Attempt to execute any statement on such a table resulted in parsing
error reported. Since this included DROP TRIGGER and DROP TABLE
statements (actually, the latter was allowed but was not functioning
properly for such tables) it was impossible to fix the problem without
manual operations on .TRG and .TRN files in data directory.
The problem was that failure to parse trigger body (due to 5.0-only
syntax) when opening trigger file for a table prevented the table
from being open. This made all operations on the table impossible
(except DROP TABLE which due to peculiarity in its implementation
dropped the table but left trigger files around).
This patch solves this problem by silencing error which occurs when
we parse trigger body during table open. Error message is preserved
for the future use and table is marked as having a broken trigger.
We also try to analyze parse tree to recover trigger name, which
will be needed in order to drop the broken trigger. DML statements
which invoke triggers on the table marked as having broken trigger
are prohibited and emit saved error message. The same happens for
DDL which change triggers except DROP TRIGGER and DROP TABLE which
try their best to do what was requested. Table becomes no longer
marked as having broken trigger when last such trigger is dropped.
mysql-test/r/trigger-compat.result:
Add results for test case for bug#45235
mysql-test/t/trigger-compat.test:
Add test case for bug#45235.
sql/sp_head.cc:
Added protection against MEM_ROOT double restoring to
sp_head::restore_thd_mem_root() method. Since this
method can be sometimes called twice during parsing
of stored routine (the first time during normal flow
of parsing, and the second time when a syntax error
is detected) we need to shortcut execution of the
method to avoid damaging MEM_ROOT by the second
consecutive call to this method.
sql/sql_trigger.cc:
Added error handler Deprecated_trigger_syntax_handler to
catch non-OOM errors during parsing of trigger body.
Added handling of parse errors into method
Table_triggers_list::check_n_load().
sql/sql_trigger.h:
Added new members to handle broken triggers and error messages.
In sql_class.cc, 'row_count', of type 'ha_rows', was used as last argument for
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD which is
"Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld".
So 'ha_rows' was used as 'long'.
On SPARC32 Solaris builds, 'long' is 4 bytes and 'ha_rows' is 'longlong' i.e. 8 bytes.
So the printf-like code was reading only the first 4 bytes.
Because the CPU is big-endian, 1LL is 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01
so the first four bytes yield 0. So the warning message had "row 0" instead of
"row 1" in test outfile_loaddata.test:
-Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 1
+Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 0
All error-messaging functions which internally invoke some printf-life function
are potential candidate for such mistakes.
One apparently easy way to catch such mistakes is to use
ATTRIBUTE_FORMAT (from my_attribute.h).
But this works only when call site has both:
a) the format as a string literal
b) the types of arguments.
So:
func(ER(ER_BLAH), 10);
will silently not be checked, because ER(ER_BLAH) is not known at
compile time (it is known at run-time, and depends on the chosen
language).
And
func("%s", a va_list argument);
has the same problem, as the *real* type of arguments is not
known at this site at compile time (it's known in some caller).
Moreover,
func(ER(ER_BLAH));
though possibly correct (if ER(ER_BLAH) has no '%' markers), will not
compile (gcc says "error: format not a string literal and no format
arguments").
Consequences:
1) ATTRIBUTE_FORMAT is here added only to functions which in practice
take "string literal" formats: "my_error_reporter" and "print_admin_msg".
2) it cannot be added to the other functions: my_error(),
push_warning_printf(), Table_check_intact::report_error(),
general_log_print().
To do a one-time check of functions listed in (2), the following
"static code analysis" has been done:
1) replace
my_error(ER_xxx, arguments for substitution in format)
with the equivalent
my_printf_error(ER_xxx,ER(ER_xxx), arguments for substitution in
format),
so that we have ER(ER_xxx) and the arguments *in the same call site*
2) add ATTRIBUTE_FORMAT to push_warning_printf(),
Table_check_intact::report_error(), general_log_print()
3) replace ER(xxx) with the hard-coded English text found in
errmsg.txt (like: ER(ER_UNKNOWN_ERROR) is replaced with
"Unknown error"), so that a call site has the format as string literal
4) this way, ATTRIBUTE_FORMAT can effectively do its job
5) compile, fix errors detected by ATTRIBUTE_FORMAT
6) revert steps 1-2-3.
The present patch has no compiler error when submitted again to the
static code analysis above.
It cannot catch all problems though: see Field::set_warning(), in
which a call to push_warning_printf() has a variable error
(thus, not replacable by a string literal); I checked set_warning() calls
by hand though.
See also WL 5883 for one proposal to avoid such bugs from appearing
again in the future.
The issues fixed in the patch are:
a) mismatch in types (like 'int' passed to '%ld')
b) more arguments passed than specified in the format.
This patch resolves mismatches by changing the type/number of arguments,
not by changing error messages of sql/share/errmsg.txt. The latter would be wrong,
per the following old rule: errmsg.txt must be as stable as possible; no insertions
or deletions of messages, no changes of type or number of printf-like format specifiers,
are allowed, as long as the change impacts a message already released in a GA version.
If this rule is not followed:
- Connectors, which use error message numbers, will be confused (by insertions/deletions
of messages)
- using errmsg.sys of MySQL 5.1.n with mysqld of MySQL 5.1.(n+1)
could produce wrong messages or crash; such usage can easily happen if
installing 5.1.(n+1) while /etc/my.cnf still has --language=/path/to/5.1.n/xxx;
or if copying mysqld from 5.1.(n+1) into a 5.1.n installation.
When fixing b), I have verified that the superfluous arguments were not used in the format
in the first 5.1 GA (5.1.30 'bteam@astra04-20081114162938-z8mctjp6st27uobm').
Had they been used, then passing them today, even if the message doesn't use them
anymore, would have been necessary, as explained above.
include/my_getopt.h:
this function pointer is used only with "string literal" formats, so we can add
ATTRIBUTE_FORMAT.
mysql-test/collections/default.experimental:
test should pass now
sql/derror.cc:
by having a format as string literal, ATTRIBUTE_FORMAT check becomes effective.
sql/events.cc:
Change justified by the following excerpt from sql/share/errmsg.txt:
ER_EVENT_SAME_NAME
eng "Same old and new event name"
ER_EVENT_SET_VAR_ERROR
eng "Error during starting/stopping of the scheduler. Error code %u"
sql/field.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_DISPLAYWIDTH 42000 S1009
eng "Display width out of range for column '%-.192s' (max = %lu)"
sql/ha_ndbcluster.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/ha_ndbcluster_binlog.cc:
Too many arguments for:
ER_GET_ERRMSG
eng "Got error %d '%-.100s' from %s"
Patch by Jonas Oreland.
sql/ha_partition.cc:
print_admin_msg() is used only with a literal as format, so ATTRIBUTE_FORMAT
works.
sql/handler.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/item_create.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
'c_len' and 'c_dec' are char*, passed as %d !! We don't know their value
(as strtoul() failed), but they are likely big, so we use INT_MAX.
'len' is ulong.
sql/item_func.cc:
ER_WARN_DATA_OUT_OF_RANGE 22003
eng "Out of range value for column '%s' at row %ld"
ER_CANT_FIND_UDF
eng "Can't load function '%-.192s'"
sql/item_strfunc.cc:
ER_TOO_BIG_FOR_UNCOMPRESS
eng "Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)"
max_allowed_packet is ulong.
sql/mysql_priv.h:
sql_print_message_func is a function _pointer_.
sql/sp_head.cc:
ER_SP_RECURSION_LIMIT
eng "Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %.192s"
max_sp_recursion_depth is ulong
sql/sql_acl.cc:
ER_PASSWORD_NO_MATCH 42000
eng "Can't find any matching row in the user table"
ER_CANT_CREATE_USER_WITH_GRANT 42000
eng "You are not allowed to create a user with GRANT"
sql/sql_base.cc:
ER_NOT_KEYFILE
eng "Incorrect key file for table '%-.200s'; try to repair it"
ER_TOO_MANY_TABLES
eng "Too many tables; MySQL can only use %d tables in a join"
MAX_TABLES is size_t.
sql/sql_binlog.cc:
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_class.cc:
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD
eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld"
WARN_DATA_TRUNCATED 01000
eng "Data truncated for column '%s' at row %ld"
sql/sql_connect.cc:
ER_HANDSHAKE_ERROR 08S01
eng "Bad handshake"
ER_BAD_HOST_ERROR 08S01
eng "Can't get hostname for your address"
sql/sql_insert.cc:
ER_WRONG_VALUE_COUNT_ON_ROW 21S01
eng "Column count doesn't match value count at row %ld"
sql/sql_parse.cc:
ER_WARN_HOSTNAME_WONT_WORK
eng "MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work"
ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT
eng "Too high level of nesting for select"
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_partition.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_plugin.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_prepare.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
ER_UNKNOWN_STMT_HANDLER
eng "Unknown prepared statement handler (%.*s) given to %s"
length value (for '%.*s') must be 'int', per the doc of printf()
and the code of my_vsnprintf().
sql/sql_show.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_table.cc:
ER_TOO_BIG_FIELDLENGTH 42000 S1009
eng "Column length too big for column '%-.192s' (max = %lu); use BLOB or TEXT instead"
sql/table.cc:
ER_NOT_FORM_FILE
eng "Incorrect information in file: '%-.200s'"
ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE
eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error."
table->s->mysql_version is ulong.
sql/unireg.cc:
ER_TOO_LONG_TABLE_COMMENT
eng "Comment for table '%-.64s' is too long (max = %lu)"
ER_TOO_LONG_FIELD_COMMENT
eng "Comment for field '%-.64s' is too long (max = %lu)"
ER_TOO_BIG_ROWSIZE 42000
eng "Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"
result set when SQLEXCEPTION is active.
The problem was in a hackish THD::no_warnings_for_error attribute.
When it was set, an error was not written to Warning_info -- only
Diagnostics_area state was changed. That means, Diagnostics_area
might contain error state, which is not present in Warning_info.
The user-visible problem was that in some cases SHOW WARNINGS
returned empty result set (i.e. there were no warnings) while
the previous SQL statement failed. According to the MySQL
protocol errors must be presented in warning list.
The main idea of this patch is to remove THD::no_warnings_for_error.
There were few places where it was used:
- sql_admin.cc, handling of REPAIR TABLE USE_FRM.
- sql_show.cc, when calling fill_schema_table_from_frm().
- sql_show.cc, when calling fill_table().
The fix is to either use internal-error-handlers, or to use
temporary Warning_info storing warnings, which might be ignored.
This patch is needed to fix Bug 11763162 (55843).
DEFINITION OF ANY ROUTINE.
The problem was that having the SELECT privilege any column of the
mysql.proc table by mistake allowed the user to see the definition
of all routines (using SHOW CREATE PROCEDURE/FUNCTION and SHOW
PROCEDURE/FUNCTION CODE).
This patch fixes the problem by making sure that those commands
are only allowed if the user has the SELECT privilege on the
mysql.proc table itself.
Test case added to sp-security.test.
Removes SHOW NEW MASTER statement and all related code.
Also removes the unused function update_slave_list from repl_failsafe.cc.
mysql-test/r/signal_code.result:
Updated result file.
The output of SHOW PROCEDURE CODE has changed, because the numerical values
of some SQLCOM_ commands have changes. This is not a problem, because
SHOW PROCEDURE CODE only exists in debug builds and the numerical values of
SQLCOM_ constants are not exposed elsewhere.
mysql-test/r/sp-code.result:
Updated result file.
The output of SHOW PROCEDURE CODE has changed, because the numerical values
of some SQLCOM_ commands have changes. This is not a problem, because
SHOW PROCEDURE CODE only exists in debug builds and the numerical values of
SQLCOM_ constants are not exposed elsewhere.
sql/mysqld.cc:
Remove SQLCOM_SHOW_NEW_MASTER.
sql/repl_failsafe.cc:
Remove show_new_master, which was only used by the removed SHOW NEW MASTER statement.
Remove translate_master, which was only used by show_new_master.
Remove find_slave_event, which was only used by translate_master.
Remove find_target_pos, which was only used by translate_master.
Remove cmp_master_pos, which was only used by translate_master.
Remove update_slave_list, which was not used at all.
sql/repl_failsafe.h:
Remove declarations of functions removed by this patch:
update_slave_list, show_new_master, translate_master, update_slave_list
Remove declarations of functions that did not exist before this patch:
handle_failsafe_rpl, load_master_data
Remove declaration of function that is static in slave.cc:
connect_to_master
sql/sp_head.cc:
Removed SQLCOM_SHOW_NEW_MASTER
sql/sql_lex.h:
Removed SQLCOM_SHOW_NEW_MASTER
sql/sql_parse.cc:
Removed SQLCOM_SHOW_NEW_MASTER
sql/sql_repl.cc:
Removed cmp_master_pos(char*,ulonglong,char*,ulonglong), which was
only used by cmp_master_pos*Slave_log_event* sev, LEX_MASTER_INFO* mi) in repl_failsafe.cc,
which has been removed.
sql/sql_repl.h:
removed cmp_master_pos
sql/sql_yacc.yy:
removed syntax SHOW NEW MASTER.
Fixed the references to security_ctx->priv_user
to be real char * pointers instead of a C array name reference.
This is somehow important for some 3d party
dtrace replacements
Problem: Extended characters outside of ASCII range where not displayed
properly in SHOW PROCESSLIST, because thd_info->query was always sent as
system_character_set (utf8). This was wrong, because query buffer
is never converted to utf8 - it is always have client character set.
Fix: sending query buffer using query character set
@ sql/sql_class.cc
@ sql/sql_class.h
Introducing a new class CSET_STRING, a LEX_STRING with character set.
Adding set_query(&CSET_STRING)
Adding reset_query(), to use instead of set_query(0, NULL).
@ sql/event_data_objects.cc
Using reset_query()
@ sql/log_event.cc
Using reset_query()
Adding charset argument to set_query_and_id().
@ sql/slave.cc
Using reset_query().
@ sql/sp_head.cc
Changing backing up and restore code to use CSET_STRING.
@ sql/sql_audit.h
Using CSET_STRING.
In the "else" branch it's OK not to use
global_system_variables.character_set_client.
&my_charset_latin1, which is set in constructor, is fine
(verified with Sergey Vojtovich).
@ sql/sql_insert.cc
Using set_query() with proper character set: table_name is utf8.
@ sql/sql_parse.cc
Adding character set argument to set_query_and_id().
(This is the main point where thd->charset() is stored
into thd->query_string.cs, for use in "SHOW PROCESSLIST".)
Using reset_query().
@ sql/sql_prepare.cc
Storing client character set into thd->query_string.cs.
@ sql/sql_show.cc
Using CSET_STRING to fetch and send charset-aware query information
from threads.
@ storage/myisam/ha_myisam.cc
Using set_query() with proper character set: table_name is utf8.
@ mysql-test/r/show_check.result
@ mysql-test/t/show_check.test
Adding tests
network when a query was slow.
When a query is slow, sent a special flag to the client
indicating this fact.
Add a test case.
Implement review comments.
include/mysql_com.h:
Clear SERVER_QUERY_WAS_SLOW at end of each statement.
Since this patch removes the technique when
thd->server_status is modified briefly only to
execute my_eof(), reset more server status
bit that may remain in the status from
execution of the previous statement.
sql/protocol.cc:
Always use thd->server_status to
in net_* functions to send the latest
status to the client.
sql/sp_head.cc:
Calculate if a query was slow before
sending EOF packet.
sql/sql_cursor.cc:
Remove juggling with thd->server_status.
The extra status bits are reset at
start of the next statement.
sql/sql_db.cc:
Remove juggling with thd->server_status.
The extra status bits are reset at
start of the next statement.
sql/sql_error.cc:
Remove m_server_status member,
it's not really part of the Diagnostics_area.
sql/sql_error.h:
Remove server_status member, it's
not part of the Diagnostics_area.
The associated hack is removed as well.
sql/sql_parse.cc:
Do not calculate if a query was
slow twice. Use a status flag in thd->server_status.
tests/mysql_client_test.c:
Add a test case for Bug#57058.
Check that the status is present
at the client, when sent.
Text conflict in mysql-test/suite/perfschema/r/dml_setup_instruments.result
Text conflict in mysql-test/suite/perfschema/r/global_read_lock.result
Text conflict in mysql-test/suite/perfschema/r/server_init.result
Text conflict in mysql-test/suite/perfschema/t/global_read_lock.test
Text conflict in mysql-test/suite/perfschema/t/server_init.test
bug #57006 "Deadlock between HANDLER and FLUSH TABLES WITH READ
LOCK" and bug #54673 "It takes too long to get readlock for
'FLUSH TABLES WITH READ LOCK'".
The first bug manifested itself as a deadlock which occurred
when a connection, which had some table open through HANDLER
statement, tried to update some data through DML statement
while another connection tried to execute FLUSH TABLES WITH
READ LOCK concurrently.
What happened was that FTWRL in the second connection managed
to perform first step of GRL acquisition and thus blocked all
upcoming DML. After that it started to wait for table open
through HANDLER statement to be flushed. When the first connection
tried to execute DML it has started to wait for GRL/the second
connection creating deadlock.
The second bug manifested itself as starvation of FLUSH TABLES
WITH READ LOCK statements in cases when there was a constant
stream of concurrent DML statements (in two or more
connections).
This has happened because requests for protection against GRL
which were acquired by DML statements were ignoring presence of
pending GRL and thus the latter was starved.
This patch solves both these problems by re-implementing GRL
using metadata locks.
Similar to the old implementation acquisition of GRL in new
implementation is two-step. During the first step we block
all concurrent DML and DDL statements by acquiring global S
metadata lock (each DML and DDL statement acquires global IX
lock for its duration). During the second step we block commits
by acquiring global S lock in COMMIT namespace (commit code
acquires global IX lock in this namespace).
Note that unlike in old implementation acquisition of
protection against GRL in DML and DDL is semi-automatic.
We assume that any statement which should be blocked by GRL
will either open and acquires write-lock on tables or acquires
metadata locks on objects it is going to modify. For any such
statement global IX metadata lock is automatically acquired
for its duration.
The first problem is solved because waits for GRL become
visible to deadlock detector in metadata locking subsystem
and thus deadlocks like one in the first bug become impossible.
The second problem is solved because global S locks which
are used for GRL implementation are given preference over
IX locks which are acquired by concurrent DML (and we can
switch to fair scheduling in future if needed).
Important change:
FTWRL/GRL no longer blocks DML and DDL on temporary tables.
Before this patch behavior was not consistent in this respect:
in some cases DML/DDL statements on temporary tables were
blocked while in others they were not. Since the main use cases
for FTWRL are various forms of backups and temporary tables are
not preserved during backups we have opted for consistently
allowing DML/DDL on temporary tables during FTWRL/GRL.
Important change:
This patch changes thread state names which are used when
DML/DDL of FTWRL is waiting for global read lock. It is now
either "Waiting for global read lock" or "Waiting for commit
lock" depending on the stage on which FTWRL is.
Incompatible change:
To solve deadlock in events code which was exposed by this
patch we have to replace LOCK_event_metadata mutex with
metadata locks on events. As result we have to prohibit
DDL on events under LOCK TABLES.
This patch also adds extensive test coverage for interaction
of DML/DDL and FTWRL.
Performance of new and old global read lock implementations
in sysbench tests were compared. There were no significant
difference between new and old implementations.
mysql-test/include/check_ftwrl_compatible.inc:
Added helper script which allows to check that a statement is
compatible with FLUSH TABLES WITH READ LOCK.
mysql-test/include/check_ftwrl_incompatible.inc:
Added helper script which allows to check that a statement is
incompatible with FLUSH TABLES WITH READ LOCK.
mysql-test/include/handler.inc:
Adjusted test case to the fact that now DROP TABLE closes
open HANDLERs for the table to be dropped before checking
if there active FTWRL in this connection.
mysql-test/include/wait_show_condition.inc:
Fixed small error in the timeout message. The correct name
of variable used as parameter for this script is "$condition"
and not "$wait_condition".
mysql-test/r/delayed.result:
Added test coverage for scenario which triggered assert in
metadata locking subsystem.
mysql-test/r/events_2.result:
Updated test results after prohibiting event DDL operations
under LOCK TABLES.
mysql-test/r/flush.result:
Added test coverage for bug #57006 "Deadlock between HANDLER
and FLUSH TABLES WITH READ LOCK".
mysql-test/r/flush_read_lock.result:
Added test coverage for various aspects of FLUSH TABLES WITH
READ LOCK functionality.
mysql-test/r/flush_read_lock_kill.result:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Use new
debug_sync point. Do not disable concurrent inserts as now
InnoDB we always use InnoDB table.
mysql-test/r/handler_innodb.result:
Adjusted test case to the fact that now DROP TABLE closes
open HANDLERs for the table to be dropped before checking
if there active FTWRL in this connection.
mysql-test/r/handler_myisam.result:
Adjusted test case to the fact that now DROP TABLE closes
open HANDLERs for the table to be dropped before checking
if there active FTWRL in this connection.
mysql-test/r/mdl_sync.result:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Replaced
usage of GRL-specific debug_sync's with appropriate sync
points in MDL subsystem.
mysql-test/suite/perfschema/r/dml_setup_instruments.result:
Updated test results after removing global
COND_global_read_lock condition variable.
mysql-test/suite/perfschema/r/func_file_io.result:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/r/func_mutex.result:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/r/global_read_lock.result:
Adjusted test case to take into account that new GRL
implementation is based on MDL.
mysql-test/suite/perfschema/r/server_init.result:
Adjusted test case after replacing custom global read
lock implementation with one based on MDL and replacing
LOCK_event_metadata mutex with metadata lock.
mysql-test/suite/perfschema/t/func_file_io.test:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/t/func_mutex.test:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/t/global_read_lock.test:
Adjusted test case to take into account that new GRL
implementation is based on MDL.
mysql-test/suite/perfschema/t/server_init.test:
Adjusted test case after replacing custom global read
lock implementation with one based on MDL and replacing
LOCK_event_metadata mutex with metadata lock.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Updated test results after prohibiting event DDL under
LOCK TABLES.
mysql-test/t/delayed.test:
Added test coverage for scenario which triggered assert in
metadata locking subsystem.
mysql-test/t/events_2.test:
Updated test case after prohibiting event DDL operations
under LOCK TABLES.
mysql-test/t/flush.test:
Added test coverage for bug #57006 "Deadlock between HANDLER
and FLUSH TABLES WITH READ LOCK".
mysql-test/t/flush_block_commit.test:
Adjusted test case after changing thread state name which
is used when COMMIT waits for FLUSH TABLES WITH READ LOCK
from "Waiting for release of readlock" to "Waiting for commit
lock".
mysql-test/t/flush_block_commit_notembedded.test:
Adjusted test case after changing thread state name which is
used when DML waits for FLUSH TABLES WITH READ LOCK. Now we
use "Waiting for global read lock" in this case.
mysql-test/t/flush_read_lock.test:
Added test coverage for various aspects of FLUSH TABLES WITH
READ LOCK functionality.
mysql-test/t/flush_read_lock_kill-master.opt:
We no longer need to use make_global_read_lock_block_commit_loop
debug tag in this test. Instead we rely on an appropriate
debug_sync point in MDL code.
mysql-test/t/flush_read_lock_kill.test:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Use new
debug_sync point. Do not disable concurrent inserts as now
InnoDB we always use InnoDB table.
mysql-test/t/lock_multi.test:
Adjusted test case after changing thread state names which
are used when DML or DDL waits for FLUSH TABLES WITH READ
LOCK to "Waiting for global read lock".
mysql-test/t/mdl_sync.test:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Replaced
usage of GRL-specific debug_sync's with appropriate sync
points in MDL subsystem. Updated thread state names which
are used when DDL waits for FTWRL.
mysql-test/t/trigger_notembedded.test:
Adjusted test case after changing thread state names which
are used when DML or DDL waits for FLUSH TABLES WITH READ
LOCK to "Waiting for global read lock".
sql/event_data_objects.cc:
Removed Event_queue_element::status/last_executed_changed
members and Event_queue_element::update_timing_fields()
method. We no longer use this class for updating mysql.events
once event is chosen for execution. Accesses to instances of
this class in scheduler thread require protection by
Event_queue::LOCK_event_queue mutex and we try to avoid
updating table while holding this lock.
sql/event_data_objects.h:
Removed Event_queue_element::status/last_executed_changed
members and Event_queue_element::update_timing_fields()
method. We no longer use this class for updating mysql.events
once event is chosen for execution. Accesses to instances of
this class in scheduler thread require protection by
Event_queue::LOCK_event_queue mutex and we try to avoid
updating table while holding this lock.
sql/event_db_repository.cc:
- Changed Event_db_repository methods to not release all
metadata locks once they are done updating mysql.events
table. This allows to keep metadata lock protecting
against GRL and lock protecting particular event around
until corresponding DDL statement is written to the binary
log.
- Removed logic for conditional update of "status" and
"last_executed" fields from update_timing_fields_for_event()
method. In the only case when this method is called now
"last_executed" is always modified and tracking change
of "status" is too much hassle.
sql/event_db_repository.h:
Removed logic for conditional update of "status" and
"last_executed" fields from Event_db_repository::
update_timing_fields_for_event() method.
In the only case when this method is called now "last_executed"
is always modified and tracking change of "status" field is
too much hassle.
sql/event_queue.cc:
Changed event scheduler code not to update mysql.events
table while holding Event_queue::LOCK_event_queue mutex.
Doing so led to a deadlock with a new GRL implementation.
This deadlock didn't occur with old implementation due to
fact that code acquiring protection against GRL ignored
pending GRL requests (which lead to GRL starvation).
One of goals of new implementation is to disallow GRL
starvation and so we have to solve problem with this
deadlock in a different way.
sql/events.cc:
Changed methods of Events class to acquire protection
against GRL while perfoming DDL statement and keep it
until statement is written to the binary log.
Unfortunately this step together with new GRL implementation
exposed deadlock involving Events::LOCK_event_metadata
and GRL. To solve it Events::LOCK_event_metadata mutex was
replaced with a metadata lock on event. As a side-effect
events DDL has to be prohibited under LOCK TABLES even in
cases when mysql.events table was explicitly locked for
write.
sql/events.h:
Replaced Events::LOCK_event_metadata mutex with a metadata
lock on event.
sql/ha_ndbcluster.cc:
Updated code after replacing custom global read lock
implementation with one based on MDL. Since MDL subsystem
should now be able to detect deadlocks involving metadata
locks and GRL there is no need for special handling of
active GRL.
sql/handler.cc:
Replaced custom implementation of global read lock with
one based on metadata locks. Consequently when doing
commit instead of calling method of Global_read_lock
class to acquire protection against GRL we simply acquire
IX in COMMIT namespace.
sql/lock.cc:
Replaced custom implementation of global read lock with
one based on metadata locks. This step allows to expose
wait for GRL to deadlock detector of MDL subsystem and
thus succesfully resolve deadlocks similar to one behind
bug #57006 "Deadlock between HANDLER and FLUSH TABLES
WITH READ LOCK". It also solves problem with GRL starvation
described in bug #54673 "It takes too long to get readlock
for 'FLUSH TABLES WITH READ LOCK'" since metadata locks used
by GRL give preference to FTWRL statement instead of DML
statements (if needed in future this can be changed to
fair scheduling).
Similar to old implementation of acquisition of GRL is
two-step. During the first step we block all concurrent
DML and DDL statements by acquiring global S metadata lock
(each DML and DDL statement acquires global IX lock for
its duration). During the second step we block commits by
acquiring global S lock in COMMIT namespace (commit code
acquires global IX lock in this namespace).
Note that unlike in old implementation acquisition of
protection against GRL in DML and DDL is semi-automatic.
We assume that any statement which should be blocked by GRL
will either open and acquires write-lock on tables or acquires
metadata locks on objects it is going to modify. For any such
statement global IX metadata lock is automatically acquired
for its duration.
To support this change:
- Global_read_lock::lock/unlock_global_read_lock and
make_global_read_lock_block_commit methods were changed
accordingly.
- Global_read_lock::wait_if_global_read_lock() and
start_waiting_global_read_lock() methods were dropped.
It is now responsibility of code acquiring metadata locks
opening tables to acquire protection against GRL by
explicitly taking global IX lock with statement duration.
- Global variables, mutex and condition variable used by
old implementation was removed.
- lock_routine_name() was changed to use statement duration for
its global IX lock. It was also renamed to lock_object_name()
as it now also used to take metadata locks on events.
- Global_read_lock::set_explicit_lock_duration() was added which
allows not to release locks used for GRL when leaving prelocked
mode.
sql/lock.h:
- Renamed lock_routine_name() to lock_object_name() and changed
its signature to allow its usage for events.
- Removed broadcast_refresh() function. It is no longer needed
with new GRL implementation.
sql/log_event.cc:
Release metadata locks with statement duration at the end
of processing legacy event for LOAD DATA. This ensures that
replication thread processing such event properly releases
its protection against global read lock.
sql/mdl.cc:
Changed MDL subsystem to support new MDL-based implementation
of global read lock.
Added COMMIT and EVENTS namespaces for metadata locks. Changed
thread state name for GLOBAL namespace to "Waiting for global
read lock".
Optimized MDL_map::find_or_insert() method to avoid taking
m_mutex mutex when looking up MDL_lock objects for GLOBAL
or COMMIT namespaces. We keep pre-created MDL_lock objects
for these namespaces around and simply return pointers to
these global objects when needed.
Changed MDL_lock/MDL_scoped_lock to properly handle
notification of insert delayed handler threads when FTWRL
takes global S lock.
Introduced concept of lock duration. In addition to locks with
transaction duration which work in the way which is similar to
how locks worked before (i.e. they are released at the end of
transaction), locks with statement and explicit duration were
introduced.
Locks with statement duration are automatically released at the
end of statement. Locks with explicit duration require explicit
release and obsolete concept of transactional sentinel.
* Changed MDL_request and MDL_ticket classes to support notion
of duration.
* Changed MDL_context to keep locks with different duration in
different lists. Changed code handling ticket list to take
this into account.
* Changed methods responsible for releasing locks to take into
account duration of tickets. Particularly public
MDL_context::release_lock() method now only can release
tickets with explicit duration (there is still internal
method which allows to specify duration). To release locks
with statement or transaction duration one have to use
release_statement/transactional_locks() methods.
* Concept of savepoint for MDL subsystem now has to take into
account locks with statement duration. Consequently
MDL_savepoint class was introduced and methods working with
savepoints were updated accordingly.
* Added methods which allow to set duration for one or all
locks in the context.
sql/mdl.h:
Changed MDL subsystem to support new MDL-based implementation
of global read lock.
Added COMMIT and EVENTS namespaces for metadata locks.
Introduced concept of lock duration. In addition to locks with
transaction duration which work in the way which is similar to
how locks worked before (i.e. they are released at the end of
transaction), locks with statement and explicit duration were
introduced.
Locks with statement duration are automatically released at the
end of statement. Locks with explicit duration require explicit
release and obsolete concept of transactional sentinel.
* Changed MDL_request and MDL_ticket classes to support notion
of duration.
* Changed MDL_context to keep locks with different duration in
different lists. Changed code handling ticket list to take
this into account.
* Changed methods responsible for releasing locks to take into
account duration of tickets. Particularly public
MDL_context::release_lock() method now only can release
tickets with explicit duration (there is still internal
method which allows to specify duration). To release locks
with statement or transaction duration one have to use
release_statement/transactional_locks() methods.
* Concept of savepoint for MDL subsystem now has to take into
account locks with statement duration. Consequently
MDL_savepoint class was introduced and methods working with
savepoints were updated accordingly.
* Added methods which allow to set duration for one or all
locks in the context.
sql/mysqld.cc:
Removed global mutex and condition variables which were used
by old implementation of GRL.
Also we no longer need to initialize Events::LOCK_event_metadata
mutex as it was replaced with metadata locks on events.
sql/mysqld.h:
Removed global variable, mutex and condition variables which
were used by old implementation of GRL.
sql/rpl_rli.cc:
When slave thread closes tables which were open for handling
of RBR events ensure that it releases global IX lock which
was acquired as protection against GRL.
sql/sp.cc:
Adjusted code to the new signature of lock_object/routine_name(),
to the fact that one now needs specify duration of lock when
initializing MDL_request and to the fact that savepoints for MDL
subsystem are now represented by MDL_savepoint class.
sql/sp_head.cc:
Ensure that statements in stored procedures release statement
metadata locks and thus release their protectiong against GRL
in proper moment in time.
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/sql_admin.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/sql_base.cc:
- Implemented support for new approach to acquiring protection
against global read lock. We no longer acquire such protection
explicitly on the basis of statement flags. Instead we always
rely on code which is responsible for acquiring metadata locks
on object to be changed acquiring this protection. This is
achieved by acquiring global IX metadata lock with statement
duration. Code doing this also responsible for checking that
current connection has no active GRL by calling an
Global_read_lock::can_acquire_protection() method.
Changed code in open_table() and lock_table_names()
accordingly.
Note that as result of this change DDL and DML on temporary
tables is always compatible with GRL (before it was
incompatible in some cases and compatible in other cases).
- To speed-up code acquiring protection against GRL introduced
m_has_protection_against_grl member in Open_table_context
class. It indicates that protection was already acquired
sometime during open_tables() execution and new attempts
can be skipped.
- Thanks to new GRL implementation calls to broadcast_refresh()
became unnecessary and were removed.
- Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request and to the fact that
savepoints for MDL subsystem are now represented by
MDL_savepoint class.
sql/sql_base.h:
Adjusted code to the fact that savepoints for MDL subsystem are
now represented by MDL_savepoint class.
Also introduced Open_table_context::m_has_protection_against_grl
member which allows to avoid acquiring protection against GRL
while opening tables if such protection was already acquired.
sql/sql_class.cc:
Changed THD::leave_locked_tables_mode() after transactional
sentinel for metadata locks was obsoleted by introduction of
locks with explicit duration.
sql/sql_class.h:
- Adjusted code to the fact that savepoints for MDL subsystem
are now represented by MDL_savepoint class.
- Changed Global_read_lock class according to changes in
global read lock implementation:
* wait_if_global_read_lock and start_waiting_global_read_lock
are now gone. Instead code needing protection against GRL
has to acquire global IX metadata lock with statement
duration itself. To help it new can_acquire_protection()
was introduced. Also as result of the above change
m_protection_count member is gone too.
* Added m_mdl_blocks_commits_lock member to store metadata
lock blocking commits.
* Adjusted code to the fact that concept of transactional
sentinel was obsoleted by concept of lock duration.
- Removed CF_PROTECT_AGAINST_GRL flag as it is no longer
necessary. New GRL implementation acquires protection
against global read lock automagically when statement
acquires metadata locks on tables or other objects it
is going to change.
sql/sql_db.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/sql_handler.cc:
Removed call to broadcast_refresh() function. It is no longer
needed with new GRL implementation.
Adjusted code after introducing duration concept for metadata
locks. Particularly to the fact transactional sentinel was
replaced with explicit duration.
sql/sql_handler.h:
Renamed mysql_ha_move_tickets_after_trans_sentinel() to
mysql_ha_set_explicit_lock_duration() after transactional
sentinel was obsoleted by locks with explicit duration.
sql/sql_insert.cc:
Adjusted code handling delaying inserts after switching to
new GRL implementation. Now connection thread initiating
delayed insert has to acquire global IX lock in addition
to metadata lock on table being inserted into. This IX lock
protects against GRL and similarly to SW lock on table being
inserted into has to be passed to handler thread in order to
avoid deadlocks.
sql/sql_lex.cc:
LEX::protect_against_global_read_lock member is no longer
necessary since protection against GRL is automatically
taken by code acquiring metadata locks/opening tables.
sql/sql_lex.h:
LEX::protect_against_global_read_lock member is no longer
necessary since protection against GRL is automatically
taken by code acquiring metadata locks/opening tables.
sql/sql_parse.cc:
- Implemented support for new approach to acquiring protection
against global read lock. We no longer acquire such protection
explicitly on the basis of statement flags. Instead we always
rely on code which is responsible for acquiring metadata locks
on object to be changed acquiring this protection. This is
achieved by acquiring global IX metadata lock with statement
duration. This lock is automatically released at the end of
statement execution.
- Changed implementation of CREATE/DROP PROCEDURE/FUNCTION not
to release metadata locks and thus protection against of GRL
in the middle of statement execution.
- Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request and to the fact that
savepoints for MDL subsystem are now represented by
MDL_savepoint class.
sql/sql_prepare.cc:
Adjusted code to the to the fact that savepoints for MDL
subsystem are now represented by MDL_savepoint class.
sql/sql_rename.cc:
With new GRL implementation there is no need to explicitly
acquire protection against GRL before renaming tables.
This happens automatically in code which acquires metadata
locks on tables being renamed.
sql/sql_show.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request and to the fact that
savepoints for MDL subsystem are now represented by
MDL_savepoint class.
sql/sql_table.cc:
- With new GRL implementation there is no need to explicitly
acquire protection against GRL before dropping tables.
This happens automatically in code which acquires metadata
locks on tables being dropped.
- Changed mysql_alter_table() not to release lock on new table
name explicitly and to rely on automatic release of locks
at the end of statement instead. This was necessary since
now MDL_context::release_lock() is supported only for locks
for explicit duration.
sql/sql_trigger.cc:
With new GRL implementation there is no need to explicitly
acquire protection against GRL before changing table triggers.
This happens automatically in code which acquires metadata
locks on tables which triggers are to be changed.
sql/sql_update.cc:
Fix bug exposed by GRL testing. During prepare phase acquire
only S metadata locks instead of SW locks to keep prepare of
multi-UPDATE compatible with concurrent LOCK TABLES WRITE
and global read lock.
sql/sql_view.cc:
With new GRL implementation there is no need to explicitly
acquire protection against GRL before creating view.
This happens automatically in code which acquires metadata
lock on view to be created.
sql/sql_yacc.yy:
LEX::protect_against_global_read_lock member is no longer
necessary since protection against GRL is automatically
taken by code acquiring metadata locks/opening tables.
sql/table.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/table.h:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/transaction.cc:
Replaced custom implementation of global read lock with
one based on metadata locks. Consequently when doing
commit instead of calling method of Global_read_lock
class to acquire protection against GRL we simply acquire
IX in COMMIT namespace.
Also adjusted code to the fact that MDL savepoint is now
represented by MDL_savepoint class.
in different default schema.
In strict mode, when data truncation or conversion happens,
THD::killed is set to THD::KILL_BAD_DATA.
This is abuse of KILL mechanism to guarantee that execution
of statement is aborted.
The stored procedures execution, on the other hand,
upon detection that a connection was killed, would
terminate immediately, without trying to restore the caller's
context, in particular, restore the caller's current schema.
The fix is, when terminating a stored procedure execution,
to only bypass cleanup if the entire connection was killed,
not in case of other forms of KILL.
mysql-test/r/sp-bugs.result:
Added result for a test case for bug#54375.
mysql-test/t/sp-bugs.test:
Added test case for bug#54375.
sql/sp_head.cc:
sp_head::execute modified: restore saved current db if
connection is not killed.
The problem was that the warnings risen by a trigger were not cleared upon
successful completion. The warnings should be cleared if the trigger completes
successfully.
The fix is to skip merging warnings into caller's Warning Info for triggers.
set to 128k.
sql/sp.cc:
Added checking for stack overrun at functions
db_load_routine/sp_find_routine.
sql/sp_head.cc:
sp_head::execute() modified: pass constant value STACK_MIN_SIZE
instead of 8 * STACK_MIN_SIZE as second argument value
in call to check_stack_overrun. Added checking for stack overrun
at functions sp_lex_keeper::reset_lex_and_exec_core/sp_instr_stmt::execute.
sql/sql_parse.cc:
check_stack_overrun modified: allocate buffer for error message
at heap instead of stack.
parse_sql modified: added call to check_stack_overrun() before
parsing of sql statement.
