- innodb_buffer_pool_dump_now_basic is modified to make sure it
really performs a dump and waits till it completion, to avoid
the apparent or hidden failure similar to MDEV-9713 / MDEV-10651
- innodb_buffer_pool_dump_pct_basic is modified to re-use the new
code from innodb_buffer_pool_dump_now_basic and thus avoid
the failure MDEV-10651
- innodb_buffer_pool_load_now_basic is re-written to simplify
the logic by re-using the code innodb_buffer_pool_dump_now_basic
and is given an opt file to avoid race conditions with
buffer pool load performed upon server startup, which causes
MDEV-14196 failure
New test cases
innodb-page-cleaners
Modified test cases
innodb_page_cleaners_basic
New function buf_flush_set_page_cleaner_thread_cnt
Increase or decrease the amount of page cleaner worker threads.
In case of increase this function creates based on current
abount and requested amount how many new threads should be
created. In case of decrease this function sets up the
requested amount of threads and uses is_requested event
to signal workers. Then we wait until all new treads
are started, old threads that should exit signal
is_finished or shutdown has marked that page cleaner
should finish.
buf_flush_page_cleaner_worker
Store current thread id and thread_no and then signal
event is_finished. If number of used page cleaner threads
decrease we shut down those threads that have thread_no
greater or equal than number of page configured page
cleaners - 1 (note that there will be always page cleaner
coordinator). Before exiting we signal is_finished.
New function innodb_page_cleaners_threads_update
Update function for innodb-page-cleaners system variable.
innobase_start_or_create_for_mysql
If more than one page cleaner threads is configured
we use new function buf_flush_set_page_cleaner_thread_cnt
to set up the requested threads (-1 coordinator).
The InnoDB purge subsystem can be best stopped by opening a read view,
for example by START TRANSACTION WITH CONSISTENT SNAPSHOT.
To ensure that everything is purged, use wait_all_purged.inc,
which waits for the History list length in SHOW ENGINE INNODB STATUS
to reach 0. Setting innodb_purge_run_now never guaranteed this.
This fixes MDEV-7742 and MDEV-8305 (Allow user to specify if stored
procedures should be logged in the slow and general log)
New functionality:
- Added new variables log_slow_disable_statements and log_disable_statements
that can be used to disable logging of certain queries to slow and
general log. Currently supported options are 'admin', 'call', 'slave'
and 'sp'.
Defaults are as before. Only 'sp' (stored procedure statements) is
disabled for slow and general_log.
- Slow log to files now includes the following new information:
- When logging stored procedure statements the name of stored
procedure is logged.
- Number of created tmp_tables, tmp_disk_tables and the space used
by temporary tables.
- When logging 'call', the logged status now contains the sum of all
included statements. Before only 'time' was correct.
- Added filsort_priority_queue as an option for log_slow_filter (this
variable existed before, but was not exposed)
- Added support for BIT types in my_getopt()
Mapped some old variables to bitmaps (old variables can still be used)
- Variable 'log_queries_not_using_indexes' is mapped to
log_slow_filter='not_using_index'
- Variable 'log_slow_slave_statements' is mapped to
log_slow_disabled_statements='slave'
- Variable 'log_slow_admin_statements' is mapped to
log_slow_disabled_statements='admin'
- All the above variables are changed to session variables from global
variables
Other things:
- Simplified LOGGER::log_command. We don't need to check for super if
OPTION_LOG_OFF is set as this flag can only be set if one is a super
user.
- Removed some setting of enable_slow_log as it's guaranteed to be set by
mysql_parse()
- mysql_admin_table() now sets thd->enable_slow_log
- Added prepare_logs_for_admin_command() to reset thd->enable_slow_log if
needed.
- Added new functions to store, restore and add slow query status
- Added new functions to store and restore query start time
- Reorganized Sub_statement_state according to types
- Added code in dispatch_command() to ensure that
thd->reset_for_next_command() is always called for a query.
- Added thd->last_sql_command to simplify checking of what was the type
of the last command. Needed when logging to slow log as lex->sql_command
may have changed before slow logging is called.
- Moved QPLAN_TMP_... to where status for tmp tables are updated
- Added new THD variable, affected_rows, to be able to correctly log
number of affected rows to slow log.
doing SYSVAR_AUTOSIZE() because of back_log > max_connections
enabled "autosized" flag, and that made IS_SYSVAR_AUTOSIZE()
true, which triggered the second SYSVAR_AUTOSIZE.
Remove back_log <= max_connections limit, back_log
doesn't *always* have to be smaller than max_connections.
- Added variable tmp_disk_table_size
- Added variable tmp_memory_table_size as an alias for tmp_table_size
- Changed internal variable tmp_table_size to tmp_memory_table_size
- create_info.data_file_length is now set with tmp_disk_table_size
- Fixed that Aria doesn't reset max_data_file_length for internal tables
- Added status flag if table is full so that we can detect this on next insert.
This ensures that the table is always 'correct', but we get the error one
row after the row that grow the table too big.
- Removed some mutex lock for internal temporary tables
The XtraDB storage engine was already replaced by InnoDB
and disabled in MariaDB Server 10.2. Let us remove it altogether
to avoid dragging dead code around.
Replace some references to XtraDB with references to InnoDB.
rpl_get_position_info(): Remove.
Remove the mysql-test-run --suite=percona, because it only contains
tests specific to XtraDB, many of which were disabled already in
earlier MariaDB versions.
When the server is started in innodb_read_only mode, there cannot be
any writes to persistent InnoDB/XtraDB files. Just like the creation
of buf_flush_page_cleaner_thread is skipped in this case, also
the creation of the XtraDB-specific buf_flush_lru_manager_thread
should be skipped.
The following options will be removed:
innodb_file_format
innodb_file_format_check
innodb_file_format_max
innodb_large_prefix
They have been deprecated in MySQL 5.7.7 (and MariaDB 10.2.2) in WL#7703.
The file_format column in two INFORMATION_SCHEMA tables will be removed:
innodb_sys_tablespaces
innodb_sys_tables
Code to update the file format tag at the end of page 0:5
(TRX_SYS_PAGE in the InnoDB system tablespace) will be removed.
When initializing a new database, the bytes will remain 0.
All references to the Barracuda file format will be removed.
Some references to the Antelope file format (meaning
ROW_FORMAT=REDUNDANT or ROW_FORMAT=COMPACT) will remain.
This basically ports WL#7704 from MySQL 8.0.0 to MariaDB 10.3.1:
commit 4a69dc2a95995501ed92d59a1de74414a38540c6
Author: Marko Mäkelä <marko.makela@oracle.com>
Date: Wed Mar 11 22:19:49 2015 +0200
This excludes MDEV-12472 (InnoDB should accept XtraDB parameters,
warning that they are ignored). In other words, MariaDB 10.3 will not
recognize any XtraDB-specific parameters.
Test fails, because of a bug: global delay_key_write is
cached in the THD and the cached value becomes out-of-date
when the global value changes.
This is fixed in MDEV-11335
Simplify the tests that are present in MySQL 5.7. Make the table
smaller while generating enough undo log. Do not unnecessarily
drop tables.
trx_purge_initiate_truncate(): Remove two crash injection points
(before and after normal redo log checkpoint), because they are
not adding any value. Clarify some messages.
trx_sys_create_rsegs(): Display the number of active undo tablespaces.
srv_undo_tablespaces_init(): When initializing the data files, do not
leave srv_undo_tablespaces_active at 0.
Do not display that number; let trx_sys_create_rsegs() display it once
the final number is known.
innodb_params_adjust(): Adjust parameters after startup.
innobase_init(): Do not allow innodb_max_undo_size to be less
than SRV_UNDO_TABLESPACE_SIZE_IN_PAGES. This avoids unnecessary
repeated truncation of undo tablespaces when using
innodb_page_size=32k or innodb_page_size=64k.
Rather than bumping the version again,
* d036cc9b2f, and again
* 5a4ec8e60b, and again
* 7f19330c595e3183d079fe2c18eecc74740e8f83;
Just accept version numbers change. Also accept that people may want
to test this against more than one version.
