main.derived_cond_pushdown: Move all 10.3 tests to the end,
trim trailing white space, and add an "End of 10.3 tests" marker.
Add --sorted_result to tests where the ordering is not deterministic.
main.win_percentile: Add --sorted_result to tests where the
ordering is no longer deterministic.
thd_rpl_stmt_based(): A new predicate to check if statement-based
replication is active. (This can also hold when replication is not
in use, but binlog is.)
que_thr_stop(), row_ins_duplicate_error_in_clust(),
row_ins_sec_index_entry_low(), row_ins(): On a duplicate key error,
only lock all index records when statement-based replication is in use.
Problem:
========
Truncate operation holds MDL on the table (t1) and tries to
acquire InnoDB dict_operation_lock. Purge holds dict_operation_lock
and tries to acquire MDL on the table (t1) to evaluate virtual
column expressions for indexed virtual columns.
It leads to deadlock of purge and truncate table (DDL).
Solution:
=========
If purge tries to acquire MDL on the table then it should do the following:
i) Purge should release all innodb latches (including dict_operation_lock)
before acquiring metadata lock on the table.
ii) After acquiring metadata lock on the table, it should check whether the
table was dropped or renamed. If the table is dropped then purge should
ignore the undo log record. If the table is renamed then it should
release the old MDL and acquire MDL on the new name.
iii) Once purge acquires MDL, it should use the SQL table handle for all
the remaining virtual index for the purge record.
purge_node_t: Introduce new virtual column information to know whether
the MDL was acquired successfully.
This is joint work with Marko Mäkelä.
specific temporary errors
The optimistic parallel slave's worker thread could face a run-time error due to
the algorithm's specifics which allows for conflicts like the reported
"Can't find record in 'table'".
A typical stack is like
{noformat}
#0 handler::print_error (this=0x61c00008f8a0, error=149, errflag=0) at handler.cc:3650
#1 0x0000555555e95361 in write_record (thd=thd@entry=0x62a0000a2208, table=table@entry=0x61f00008ce88, info=info@entry=0x7fffdee356d0) at sql_insert.cc:1944
#2 0x0000555555ea7767 in mysql_insert (thd=thd@entry=0x62a0000a2208, table_list=0x61b00012ada0, fields=..., values_list=..., update_fields=..., update_values=..., duplic=<optimized out>, ignore=<optimized out>) at sql_insert.cc:1039
#3 0x0000555555efda90 in mysql_execute_command (thd=thd@entry=0x62a0000a2208) at sql_parse.cc:3927
#4 0x0000555555f0cc50 in mysql_parse (thd=0x62a0000a2208, rawbuf=<optimized out>, length=<optimized out>, parser_state=<optimized out>) at sql_parse.cc:7449
#5 0x00005555566d4444 in Query_log_event::do_apply_event (this=0x61200005b9c8, rgi=<optimized out>, query_arg=<optimized out>, q_len_arg=<optimized out>) at log_event.cc:4508
#6 0x00005555566d639e in Query_log_event::do_apply_event (this=<optimized out>, rgi=<optimized out>) at log_event.cc:4185
#7 0x0000555555d738cf in Log_event::apply_event (rgi=0x61d0001ea080, this=0x61200005b9c8) at log_event.h:1343
#8 apply_event_and_update_pos_apply (ev=ev@entry=0x61200005b9c8, thd=thd@entry=0x62a0000a2208, rgi=rgi@entry=0x61d0001ea080, reason=<optimized out>) at slave.cc:3479
#9 0x0000555555d8596b in apply_event_and_update_pos_for_parallel (ev=ev@entry=0x61200005b9c8, thd=thd@entry=0x62a0000a2208, rgi=rgi@entry=0x61d0001ea080) at slave.cc:3623
#10 0x00005555562aca83 in rpt_handle_event (qev=qev@entry=0x6190000fa088, rpt=rpt@entry=0x62200002bd68) at rpl_parallel.cc:50
#11 0x00005555562bd04e in handle_rpl_parallel_thread (arg=arg@entry=0x62200002bd68) at rpl_parallel.cc:1258
{noformat}
Here {{handler::print_error}} computes whether to error log the
current error when --log-warnings > 1. The decision flag is consulted
bu {{my_message_sql()}} which can be eventually called.
In the bug case the decision is to log.
However in the optimistic mode slave applier case any conflict is
attempted to resolve with rollback and retry to success. Hence the
logging is at least extraneous.
The case is fixed with adding a new flag {{ME_LOG_AS_WARN}} which
{{handler::print_error}} may propagate further on through {{my_error}}
when the error comes from an optimistically running slave worker thread.
The new flag effectively requests the warning level for the errlog record,
while the thread's DA records the actual error (which is regarded as temporary one
by the parallel slave error handler).
Fixed by deleting the sequence if we where not able to initialize it
I also noticed that we didn't always set the error message when
check_killed(), which could lead to aborted queries without error
beeing properly set. Fixed by default setting error message if
check_error() noticed that killed had been called.
This allowed me to remove a lot of calls to thd->send_kill_message().
The cause of this was several different bugs:
- When using binary logging with binlog_row_image=FULL
the all bits in read_set was set, which caused a
different (wrong) pattern for marking vcol_set.
- TABLE::mark_virtual_columns_for_write() didn't in all
cases mark vcol_set with the vcol_field.
- TABLE::update_virtual_fields() has to update all
vcol fields on REPLACE if binary logging with FULL
is used.
- VCOL_UPDATE_INDEXED should update all vcol fields part
of an index that was not updated by VCOL_UPDATE_FOR_READ
- max_row_length() calculated length of NULL and not
used fields. This didn't cause any crash, but used
more memory than needed.
simplify. move common code inside, specify common flags inside,
rewrite dead code (`if (mode & O_TEMPORARY)` on Linux, where
`O_TEMPORARY` is always 0) to actually do something.
The code passing positions in the query to constructors of
Rewritable_query_parameter descendants (e.g. Item_splocal)
was not reliable. It used various Lex_input_stream methods:
- get_tok_start()
- get_tok_start_prev()
- get_tok_end()
- get_ptr()
to find positions of the recently scanned tokens.
The challenge was mostly to choose between get_tok_start()
and get_tok_start_prev(), taking into account to the current
grammar (depending if lookahead takes place before
or after we read the positions in every particular rule).
But this approach did not work at all in combination
with token contractions, when MYSQLlex() translates
two tokens into one token ID, for example:
WITH ROLLUP -> WITH_ROLLUP_SYM
As a result, the tokenizer is already one more token ahead.
So in query fragment:
"GROUP BY d, spvar WITH ROLLUP"
get_tok_start() points to "ROLLUP".
get_tok_start_prev() points to "WITH".
As a result, it was "WITH" who was erroneously replaced
to NAME_CONST() instead of "spvar".
This patch modifies the code to do it a different way.
Changes:
1. For keywords and identifiers, the tokenizer now
returns LEX_CTRING pointing directly to the query
fragment. So query positions are now just available using:
- $1.str - for the beginning of a token
- $1.str+$1.length - for the end of a token
2. Identifiers are not allocated on the THD memory root
in the tokenizer any more. Allocation is now done
on later stages, in methods like LEX::create_item_ident().
3. Two LEX_CSTRING based structures were added:
- Lex_ident_cli_st - used to store the "client side"
identifier representation, pointing to the
query fragment. Note, these identifiers
are encoded in @@character_set_client
and can have broken byte sequences.
- Lex_ident_sys_st - used to store the "server side"
identifier representation, pointing to the
THD allocated memory. This representation
guarantees that the identifier was checked
for being well-formed, and is encoded in utf8.
4. To distinguish between two identifier types
in the grammar, two Bison types were added:
<ident_cli> and <ident_sys>
5. All non-reserved keywords were marked as
being of the type <ident_cli>.
All reserved keywords are still of the type NONE.
6. All curly brackets in rules collecting
non-reserved keywords into non-terminal
symbols were removed, e.g.:
Was:
keyword_sp_data_type:
BIT_SYM {}
| BOOLEAN_SYM {}
Now:
keyword_sp_data_type:
BIT_SYM
| BOOLEAN_SYM
This is important NOT to have brackets here!!!!
This is needed to make sure that the underlying
Lex_ident_cli_ststructure correctly passes up to
the calling rule.
6. The code to scan identifiers and keywords
was moved from lex_one_token() into new
Lex_input_stream methods:
scan_ident_sysvar()
scan_ident_start()
scan_ident_middle()
scan_ident_delimited()
This was done to:
- get rid of enormous amount of references to &yylval->lex_str
- and remove a lot of references like lip->xxx
7. The allocating functionality which puts identifiers on the
THD memory root now resides in methods of Lex_ident_sys_st,
and in THD::to_ident_sys_alloc().
get_quoted_token() was removed.
8. Cleanup: check_simple_select() was moved as a method to LEX.
9. Cleanup: Some more functionality was moved from *.yy
to new methods were added to LEX:
make_item_colon_ident_ident()
make_item_func_call_generic()
create_item_qualified_asterisk()
These test can sporadically show mutex deadlock warnings between LOCK_wsrep_thd
and LOCK_thd_data mutexes. This means that these mutexes can be locked in opposite
order by different threads, and thus result in deadlock situation.
To fix such issue, the locking policy of these mutexes should be revised and
enforced to be uniform. However, a quick code review shows that the number of
lock/unlock operations for these mutexes combined is between 100-200, and all these
mutex invocations should be checked/fixed.
On the other hand, it turns out that LOCK_wsrep_thd is used for protecting access to
wsrep variables of THD (wsrep_conflict_state, wsrep_query_state), whereas LOCK_thd_data
protects query, db and mysys_var variables in THD. Extending LOCK_thd_data to protect
also wsrep variables looks like a viable solution, as there should not be a use case
where separate threads need simultaneous access to wsrep variables and THD data variables.
In this commit LOCK_wsrep_thd mutex is refactored to be replaced by LOCK_thd_data.
By bluntly replacing LOCK_wsrep_thd by LOCK_thd_data, will result in double locking
of LOCK_thd_data, and some adjustements have been performed to fix such situations.
