NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
The bug happened because filtering-out a STMT_END_F-flagged event so that
the transaction COMMIT finds traces of incomplete statement commit.
Such situation is only possible with ndb circular replication. The filtered-out
rows event is one that immediately preceeds the COMMIT query event.
Fixed with deploying an the rows-log-event statement commit at executing
of the transaction COMMIT event.
Resources that were allocated by other than STMT_END_F-flagged event of
the last statement are clean up prior execution of the commit logics.
There are two issues:
1. 6.0 uses the obsolate master-*** server options;
2. the test is not deterministic in that although master vs slave consistency is
fine, two runs of the test can have different results. The reason of the
non-determinism is the combination of
a chosen way to demo results and the ndb_autoincrement_prefetch_sz feature.
The current patch fixes the 2nd issue by putting out results via diff_table macro
instead of the former run-sensitive method.
The 1st issue is going to be fixed by a separate patch to 6.0.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
- remove totally wrong (syntax) entries from disabled.def
- remove entries belonging to deleted tests from disabled.def
- correct the comments (correct the bug mentioned) of entries in disabled.def
- remove never completed tests which were accidently pushed
Problem: Many test cases don't clean up after themselves (fail
to drop tables or fail to reset variables). This implies that:
(1) check-testcase in the new mtr that currently lives in
5.1-rpl failed. (2) it may cause unexpected results in
subsequent tests.
Fix: make all tests clean up.
Also: cleaned away unnecessary output in rpl_packet.result
Also: fixed bug where rpl_log called RESET MASTER with a running
slave. This is not supposed to work.
Also: removed unnecessary code from rpl_stm_EE_err2 and made it
verify that an error occurred.
Also: removed unnecessary code from rpl_ndb_ctype_ucs2_def.
According to documenation:
http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster-replication-issues.html
When setting up circular replication for clusters with different
SQL nodes in each cluster used as replication master and slave,
SQL nodes must not start with --log-slave-updates option.
This patch fixed the test case by remove log-slave-updates
configuration from test case configuration file.
pb notices differences in results at the very beginning of the test.
Absense of mysql.ndb_apply_status must be benign anyway, but the warning should not happen
if have_ndb.inc is invoked ahead of ndb_master-slave.
Fixed with relocation of the macros.
manually resolved conflicts:
Text conflict in client/mysqltest.c
Contents conflict in mysql-test/include/have_bug25714.inc
Text conflict in mysql-test/include/have_ndbapi_examples.inc
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/suite/parts/inc/partition_check_drop.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check1.inc
Text conflict in mysql-test/suite/parts/inc/partition_layout_check2.inc
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_1_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter1_2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter2_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_alter3_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_innodb.result
Text conflict in mysql-test/suite/parts/r/partition_basic_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_basic_symlink_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_engine_myisam.result
Text conflict in mysql-test/suite/parts/r/partition_syntax_myisam.result
Text conflict in mysql-test/suite/rpl_ndb/t/disabled.def
Text conflict in mysql-test/t/disabled.def
Problem 1: tests often fail in pushbuild with a timeout when waiting
for the slave to start/stop/receive error.
Fix 1: Updated the wait_for_slave_* macros in the following way:
- The timeout is increased by a factor ten
- Refactored the macros so that wait_for_slave_param does the work for
the other macros.
Problem 2: Tests are often incorrectly written, lacking a
source include/wait_for_slave_to_[start|stop].inc.
Fix 2: Improved the chance to get it right by adding
include/start_slave.inc and include/stop_slave.inc, and updated tests
to use these.
Problem 3: The the built-in test language command
wait_for_slave_to_stop is a misnomer (does not wait for the slave io
thread) and does not give as much debug info in case of failure as
the otherwise equivalent macro
source include/wait_for_slave_sql_to_stop.inc
Fix 3: Replaced all calls to the built-in command by a call to the
macro.
Problem 4: Some, but not all, of the wait_for_slave_* macros had an
implicit connection slave. This made some tests confusing to read,
and made it more difficult to use the macro in circular replication
scenarios, where the connection named master needs to wait.
Fix 4: Removed the implicit connection slave from all
wait_for_slave_* macros, and updated tests to use an explicit
connection slave where necessary.
Problem 5: The macros wait_slave_status.inc and wait_show_pattern.inc
were unused. Moreover, using them is difficult and error-prone.
Fix 5: remove these macros.
Problem 6: log_bin_trust_function_creators_basic failed when running
tests because it assumed @@global.log_bin_trust_function_creators=1,
and some tests modified this variable without resetting it to its
original value.
Fix 6: All tests that use this variable have been updated so that
they reset the value at end of test.
Problem: rpl_ndb_transaction fails because it assumes nothing
is written to the binlog at a certain point. However, ndb may
binlog updates in ndb system tables at a nondeterministic
time point after an ndb table update has been committed.
Fix: break the test into two. rpl_ndb_transaction still does
the ndb updates needed by the first half of the test. The new
test case rpl_bug26395 includes the part that assumes nothing
more will be written to the binlog.
The reason is that we are using a sleep to wait for slave to reach the
slave_transaction_retries limit.
Fix: wait for the slave to stop instead. This is what we want to do, since
the slave stops when the limit is reached.
a SELECT doesn't cause ROLLBACK of statem".
The idea of the fix is to ensure that we always commit the current
statement at the end of dispatch_command(). In order to not issue
redundant disc syncs, an optimization of the two-phase commit
protocol is implemented to bypass the two phase commit if
the transaction is read-only.
irrelevant to execute since the charset information does not
affect replication for row-based replication. The row-based
versions of the tests were removed, and the statement-based
version of the test was made executable by all three modes.
This involves removing any lines that causes the test to be
dependent on the contents of the binary log, and instead we
just check that the replication works as it should.
