XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
When a storage engine failed to initialize before allocated slot number,
the slot number would be 0, and when later finalizing this plugin, it would
accidentally unplug the storage engine currently uses slot 0.
This patch fixed this problem by add a new macro value HA_SLOT_UNDEF to
distinguish undefined slot number from slot 0.
There is a missing check for memory allocation failure when allocating
memory for the handlerton structure. If the handlerton init function
tries to de-reference the pointer, it will cause a segmentation fault
and crash the server.
This patch fixes the problem by not calling the init function if memory
allocation failed, and instead prints an informative error message and
reports the error to the caller.
sql/handler.cc:
Add a check if memory allocation succeeded before calling the init
function. If it failed, it is not necessary to free the memory,
but the plugin->data is set to NULL to ensure that it can be checked
for failure.
Create temporary InnoDB table fails on case insensitive
filesystems, when lower_case_table_names is 2 (e.g. OS X)
and temporary directory path contains upper case letters.
The problem was that tmpdir prefix was converted to lower
case when table was created, but was passed as is when
table was opened.
Fixed by leaving tmpdir prefix part intact.
mysql-test/r/lowercase_mixed_tmpdir_innodb.result:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb-master.opt:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb-master.sh:
A test case for BUG#45638.
mysql-test/t/lowercase_mixed_tmpdir_innodb.test:
A test case for BUG#45638.
sql/handler.cc:
Fixed get_canonical_filename() to not lowercase filesystem
path prefix for temporary tables.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"
mysql-test/r/create.result:
test that syntax is not accepted
mysql-test/t/create.test:
test that syntax is not accepted
sql/handler.cc:
remove ROW_FORMAT=PAGE
sql/handler.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(see also table.h)
sql/lex.h:
removing syntax
sql/sql_show.cc:
removing output of noise keywords in SHOW CREATE TABLE and INFORMATION_SCHEMA.TABLES
sql/sql_table.cc:
removing TRANSACTIONAL
sql/sql_yacc.yy:
removing syntax
sql/table.cc:
removing TRANSACTIONAL, PAGE_CHECKSUM. Their place in the frm file is not reclaimed,
for compatibility with older 5.1.
sql/table.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(and there are several engines which use the content TABLE_SHARE and thus rely on a certain binary
layout of this structure).
Problem was that a failing rename just left the partitions at the state
it was at the failure.
Solution was to try to revert the started rename if a failure occured.
mysql-test/r/partition_not_embedded.result:
Bug#30102: Rename table does corrupt tables with partition files on failure
New result file
mysql-test/t/partition_not_embedded.test:
Bug#30102: Rename table does corrupt tables with partition files on failure
New test file
(list_files does not report the files in embedded)
sql/ha_partition.cc:
Bug#30102: Rename table does corrupt tables with partition files on failure
Better error handling for rename partitions (reverting the started rename
operation)
Different order of files for delete.
sql/handler.cc:
Bug#30102: Rename table does corrupt tables with partition files on failure
Tries to remove as many table files as possible
if the first delete succeeds.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
extra/perror.c:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
include/my_base.h:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/ha_innodb.cc:
Return HA_ERR_TOO_MANY_CONCURRENT_TRXS to mysql server
sql/handler.cc:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/share/errmsg.txt:
Add error message for ER_TOO_MANY_CONCURRENT_TRXS
The problem is that the one phase commit function failed to
properly end a empty transaction. The solution is to ensure
that the transaction cleanup procedure is invoked even for
empty transactions.
mysql-test/r/xa.result:
Add test case result for Bug#45548
mysql-test/t/xa.test:
Add test case for Bug#45548
sql/handler.cc:
Invoke transaction cleanup function whenever a transaction is ended.
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
client/mysql.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster_binlog.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/handler.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/log.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/mysqld.cc:
removed unnecessary line
sql/parse_file.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_acl.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_base.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_db.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_delete.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_partition.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_rename.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_show.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_table.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_view.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
The problem is that when a optimization of read-only transactions
(bypass 2-phase commit) was implemented, it removed the code that
reseted the XID once a transaction wasn't active anymore:
sql/sql_parse.cc:
- bzero(&thd->transaction.stmt, sizeof(thd->transaction.stmt));
- if (!thd->active_transaction())
- thd->transaction.xid_state.xid.null();
+ thd->transaction.stmt.reset();
This mostly worked fine as the transaction commit and rollback
functions (in handler.cc) reset the XID once the transaction is
ended. But those functions wouldn't reset the XID in case of
a empty transaction, leading to a assertion when a new starting
a new XA transaction.
The solution is to ensure that the XID state is reset when empty
transactions are ended (by either commit or rollback). This is
achieved by reorganizing the code so that the transaction cleanup
routine is invoked whenever a transaction is ended.
mysql-test/r/xa.result:
Add test case result for Bug#44672
mysql-test/t/xa.test:
Add test case for Bug#44672
sql/handler.cc:
Invoke transaction cleanup function whenever a transaction is
ended. Move XID state reset logic to the transaction cleanup
function.
sql/sql_class.h:
Add XID state reset logic.
Problem: commit doesn't delete savepoints if there are no changes
in the transaction.
Fix: delete them in such cases.
mysql-test/r/innodb_mysql.result:
Fix for bug #26288: savepoint not deleted, comit on empty transaction
- test result.
mysql-test/t/innodb_mysql.test:
Fix for bug #26288: savepoint not deleted, comit on empty transaction
- test case.
sql/handler.cc:
Fix for bug #26288: savepoint not deleted, comit on empty transaction
- call transaction.cleanup() even if nht is 0 to delete
possible savepoints.
handler::get_dup_key used the called handler for the
info call, but used table->file handler for errkey.
Fixed by using table->file->info instead.
mysql-test/r/partition_error.result:
Bug#38719: Partitioning returns a different error code for
a duplicate key error
Added test for verification
mysql-test/t/partition_error.test:
Bug#38719: Partitioning returns a different error code for
a duplicate key error
Added test for verification
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
innodb_flush_method=wrong_value causes crash
Problem: after a failed plugin initialization, incompletely
initialized data remained in the plugin and handlerton data
structures. These were used later and caused the crash.
Fix: clean-up plugin related data if initialization failed.
Note: no test case added, hand tested.
sql/handler.cc:
Fix for bug #40757: Starting server on Windows with
innodb_flush_method=wrong_value causes crash
- free allocated hton and set plugin->data
(pointing to handlerton) to NULL if plugin->init() fails,
as we use it as a sign that ha_initialize_handlerton() is failed,
which is used in ha_finalize_handlerton().
- do the same if there's no free slot for a plugin in the
hton2plugin[] array or there are too many storage engines.
- call plugin->deinit() in such cases as we successfully
called plugin->init() before.
When a MEMORY table is full the error is returned to client but not written
to error log.
Fixed the handler api to write the error mesage to error log when the table is
full.
Note: No TestCase included as testing the error log is non-trivial.
sql/handler.cc:
Fixed handler::print_error() to write the error message to error log
when the table is full.
Problem: in 5.0 'check table for upgrade' doesn't detect
incompatible collation changes made in 5.0.48.
Fix: backport #39585 fix to 5.0
sql/handler.cc:
Fix for bug#40984: backport fix from 39585 into 5.0
- backport of #39585 fix
sql/handler.h:
Fix for bug#40984: backport fix from 39585 into 5.0
- backport of #39585 fix
