type-of-operation-aware metadata locks and added a
wait-for graph based deadlock detector to the MDL
subsystem (this patch fixed bug #46272 "MySQL 5.4.4,
new MDL: unnecessary deadlock" and bug #37346
"innodb does not detect deadlock between update and
alter table").
Removed unused and redundant method.
mysql-test/suite/sys_vars/r/pseudo_thread_id_basic.result:
Uodated result file
mysql-test/suite/sys_vars/t/pseudo_thread_id_basic.test:
Added code to explain the failiure
mysql-test/suite/sys_vars/t/rpl_semi_sync_master_enabled_basic.test:
Added code to handle diff result outpt in windows (dll vs. so)
mysql-test/suite/sys_vars/t/rpl_semi_sync_master_timeout_basic.test:
Added code to handle diff result outpt in windows (dll vs. so)
mysql-test/suite/sys_vars/t/rpl_semi_sync_master_trace_level_basic.test:
Added code to handle diff result outpt in windows (dll vs. so)
mysql-test/suite/sys_vars/t/rpl_semi_sync_master_wait_no_slave_basic.test:
Added code to handle diff result outpt in windows (dll vs. so)
mysql-test/suite/sys_vars/t/rpl_semi_sync_slave_enabled_basic.test:
Added code to handle diff result outpt in windows (dll vs. so)
mysql-test/suite/sys_vars/t/rpl_semi_sync_slave_trace_level_basic.test:
Added code to handle diff result outpt in windows (dll vs. so)
fails in PB sporadically)
The IO thread can concurrently access the relay log IO_CACHE
while another thread is performing an FLUSH LOGS procedure.
FLUSH LOGS closes and reopens the relay log and while doing so it
(re)initializes its IO_CACHE. During this procedure the IO_CACHE
mutex is also reinitialized, which can cause problems if some
other thread (namely the IO THREAD) is concurrently accessing it
at the time .
This patch fixes the problem by extending the interface of the
flush_master_info function to also include a second paramater,
"need_relay_log_lock", stating whether the thread should grab the
relay log lock or not before actually flushing the relay log.
Also, IO thread now calls flush_master_info with this flag set
when it flushes master info with in the event read_event loop.
Finally, we also increase loop time in rpl_heartbeat_basic test
case, so that the number of calls to flush logs doubles, stressing
this part of the code a little more.
mysql-test/suite/rpl/t/rpl_heartbeat_basic.test:
Doubled the number of iterations on the FLUSH LOGS loop by
doubling the time available to perform all iterations.
sql/repl_failsafe.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/rpl_mi.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/rpl_mi.h:
Changed flush_master_info interface. Now takes a second parameter
instead of just one. The second parameter is: need_lock_relay_log.
sql/rpl_rli.cc:
Small fix in comment.
sql/slave.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/sql_repl.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
failed in open_ltable()
The problem was too restrictive asserts that enforced that
open_ltable() was called without any active HANDLERs, LOCK TABLES
or global read locks.
However, this can happen in several cases when opening system
tables. The assert would, for example, be triggered when drop
function was called from a connection with active HANDLERs as
this would cause open_ltable() to be called for mysql.proc.
The assert could also be triggered when using table-based
general log (mysql.general_log).
This patch removes the asserts since they will be triggered in
several legitimate cases and because the asserts are no longer
relevant due to changes in how locks are released.
The patch also fixes set_needs_thr_lock_abort() that before
ignored its parameter and always set the member variable to TRUE.
Test case added to mdl_sync.test.
Thanks to Dmitry Lenev for help with this bug!
Post merge fixes. In sys_vars tests suite, whenever we use LOCK TABLE WRITE,
adjust to lock the subject table indirecty via a view, to ensure that
there the desired lock conflict in thr_lock.c is still taking place.
If locked directly in LOCK TABLES list, thr_lock.c does not get
involved.
Adjust the thread wait state names in information_schema.processlist.
write()/read()
Sometimes stop/restart master or stop/restart salve can cause
network error, which can cause the 'invalid file descriptor
-1 in syscall write()/read()' warnings. All involved test
cases except rpl_slave_load_remove_tmpfile belong to the
kind of network error. So they are expected.
The 'rpl_slave_load_remove_tmpfile' belongs to file error,
but it is testing the file error as following code:
DBUG_EXECUTE_IF("remove_slave_load_file_before_write",
my_close(fd,MYF(0)); fd= -1; my_delete(fname, MYF(0)););
So it's expected too.
To fix the problem, add the valgrind warnings to the global
suppression list to suppress it.
mysql-test/include/mtr_warnings.sql:
Added code to suppress valgrind warnings: invalid file
descriptor -1 in syscall write()/read().
m_tickets.front() == m_trans_sentinel'".
Debug build of server crashed due to assert failure in MDL
subsystem when one tried to execute multi-table REPAIR or
OPTIMIZE in autocommit=0 mode.
The assert failure occured when multi-table REPAIR or OPTIMIZE
started processing of second table from its table list and
tried to acquire upgradable metadata lock on this table.
The cause of the assert failure were MDL locks left over from
processing of previous table. It turned out that in autocommit=0
mode close_thread_tables() which happens at the end of table
processing doesn't release metadata locks.
This fix solves problem by releasing locks explicitly using
MDL_context::release_trans_locks() call.
mysql-test/r/repair.result:
Added test for bug #50784 "MDL: Assertion `m_tickets.is_empty() ||
m_tickets.front() == m_trans_sentinel'".
mysql-test/t/repair.test:
Added test for bug #50784 "MDL: Assertion `m_tickets.is_empty() ||
m_tickets.front() == m_trans_sentinel'".
sql/sql_table.cc:
Ensure that metadata locks are released after multi-table REPAIR/
OPTIMIZE/... processes each table. close_thread_tables() which is
called after processing each table doesn't release metadata locks
if we are in autocommit=0 mode. So this have to be done
explicitly by calling MDL_context::release_trans_locks().
path names than 99 characters, using the USTAR format of the
resulting source TAR.
To be able to specify the use of USTAR when creating the source
TAR, we needed both to update the GNU autotools version requirements
slightly, and update the initiation of the tools to use more
modern constructs.
fulltext search and row op.
The search for fulltext indexes is searching for some special
predicate layouts. While doing so it's not checking for the number
of columns of the expressions it tries to calculate.
And since row expressions can't return a single scalar value there
was a crash.
Fixed by checking if the expressions are scalar (in addition to
being constant) before calling Item::val_xxx() methods.
--default-character-set and --character-set-server such
that only the first will give a deprecation warning.
Apart from that, the two options should do the same.
Cleanup, formatting improvements,
vendor is Sun (since MySQL AB was bought).
Backport the change so that RPM doesn't magically
create a dependency on "Perl-DBI".
The test case rpl_binlog_corruption fails on windows because when
adding a line to the binary log index file it gets terminated
with a CR+LF (which btw, is the normal case in windows, but not on
Unixes - LF). This causes mismatch between the relay log names,
causing mysqld to report that it cannot find the log file.
We fix this by creating the instrumented index file through
mysql, ie, using SELECT ... INTO DUMPFILE ..., as opposed on
relying on ultimatly OS commands like: -- echo "..." >
index. These changes go into the file and make the procedure
platform independent:
include/setup_fake_relay_log.inc
Side note: when using SELECT ... INTO DUMPFILE ..., one needs to
check if mysqld is running with secure_file_priv. If it is, we do
it in two steps: 1. create the file on the allowed location;
2. move it to the datadir. If it is not, then we just create the
file directly on the datadir (so previous step 2. is not needed).
Fix Bug#50555 "handler commands crash server in my_hash_first()"
as a post-merge fix (the new handler tests are not passing
otherwise).
- in hash.c, don't call calc_hash if ! my_hash_inited().
- add tests and results for the test case for Bug#50555
mysys/hash.c:
Assert that the hash is initialized when it's used.
sql/set_var.cc:
Check that the hash is initalized before using it (Bug#50555)
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Linux x86_64 debug
Two test cases fail because the suppression for the unsafe
warning needs to be updated (BUG@39934 refactored this part and
these changes are only in mysql-next-mr - this is why we notice
them now when merging in next-mr). This is the case for
rpl_nondeterministic_functions and rpl_misc_functions test
cases. rpl_stm_binlog_direct test case is not needed in version >
5.1. The rpl_heartbeat_basic test case fails because patch for
BUG@50397 removed the CHANGE MASTER in the slave that would set
it's period to 1/10 of the master. This would cause the test
assertion to fail.
The fixes for the issues described above are:
- rpl_misc_functions - updated suppression message
- rpl_nondeterministic_functions - updated suppression message
- rpl_stm_binlog_direct - removed the test case (it is not
needed in versions > 5.1)
- rpl_heartbeat_basic - deployed instruction:
CHANGE MASTER TO MASTER_HEARTBEAT_PERIOD=0.1;
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
