to BUF_BLOCK_ZIP_DIRTY (discarding the uncompressed page corresponding
to a modified compressed page that has not been flushed to disk).
buf_page_can_relocate(): New function, modelled after
buf_flush_ready_for_replace().
buf_LRU_free_block(): Allow the transition to BUF_BLOCK_ZIP_DIRTY.
buf_flush_insert_into_flush_list(): Make the prototype public.
buf_buddy_relocate(): Remove an unnecessary switch statement.
Use buf_page_can_relocate() instead of buf_flush_ready_for_replace().
buf_page_peek(): Made UNIV_INLINE.
Document UNIV_ZIP_DEBUG.
Improve diagnostics.
buf_buddy_relocate(): Do not assume all small blocks to contain only one
buf_page_t object. Require an exact size match, as in the case of
compressed pages.
buf_relocate(): Relocate buf_pool->LRU_old if needed.
Validate the LRU list in debug builds.
buf_LRU_block_remove_hashed_page(): Do not overwrite FIL_PAGE_OFFSET
or FIL_PAGE_ARCH_LOG_NO_OR_SPACE_ID. The memory will be invalidated
in debug builds of buf_buddy_free().
buf0buddy.c: Add assertions for not holding buf_pool->zip_mutex.
The calling thread should not be holding any block->mutex, but it might
be too time-consuming to assert against that, even #ifdef UNIV_SYNC_DEBUG.
There is something wrong with the management of compressed-only blocks
(BUF_BLOCK_ZIP_PAGE). To disable the creation of such blocks, set zip=TRUE
in buf_LRU_block_remove_hashed_page().
buf_LRU_block_remove_hashed_page(): Release buf_pool->zip_mutex when
freeing a compressed-only page and its control block, with buf_buddy_free().
Adapt callers.
buf_LRU_block_free_hashed_page(): Change the parameter type from buf_page_t*
to buf_block_t*.
buf_LRU_free_block(): Move below the definition of buf_LRU_add_block_low().
Allocate block descriptor for compressed-only blocks.
buf_LRU_block_free_non_file_page(): Replace ut_free() with buf_buddy_free().
buf_zip_decompress(): New function, split from buf_page_io_complete().
buf_page_init_for_read(): Do not allocate the compressed page until it is
really needed, to avoid the overhead of the buddy allocator. Decompress
compressed-only blocks that are needed again.
buf_page_create(): Do not allocate the compressed page until it is
really needed, to avoid the overhead of the buddy allocator.
buf_validate(): Replace some equality tests on the lengths of the LRU
list and the flush lists with greater-or-equal tests, since the counted
numbers do not include control blocks for compressed-only pages.
buf_page_get_gen(): Cache the result of fil_space_get_zip_size().
trx_commit_off_kernel(): Eliminate the flag must_flush_log. Initialize lsn = 0
to signify must_flush_log == FALSE.
log_flush_margin(): Eliminate the flag do_flush. Initialize lsn = 0
to signify do_flush == FALSE.
buf_LRU_block_remove_hashed_page(): Return the new state of the block.
Only call buf_LRU_block_free_hashed_page()
if buf_LRU_block_remove_hashed_page() did not return BUF_BLOCK_ZIP_FREE,
that is, the control block was not freed.
buf_LRU_insert_zip_clean(): New function, for inserting a compressed-only
block into buf_pool->zip_clean in the LRU order.
buf_LRU_block_remove_hashed_page(), buf_LRU_free_block():
Add the flag "zip" for controlling if the compressed page of an uncompressed
page should be removed. For now, assume zip==TRUE.
buf_LRU_get_free_block(): Replace the test for UT_LIST_GET_LEN(buf_pool->free)
with a test for the return value of buf_LRU_get_free_only(). Do not
free zip.data, as it must already have been freed.
buf_flush_insert_into_flush_list(), buf_flush_insert_sorted_into_flush_list():
Remove compressed-only blocks from the buf_pool->zip_clean list.
buf_flush_remove(): Restore compressed-only blocks to
the buf_pool->zip_clean list.
buf_page_init_for_read(): Uncompress compressed-only blocks when possible.
Currently, there cannot be any compressed-only blocks in the buffer pool;
they would be inserted by buf_LRU_free_block(bpage, zip=FALSE).
buf_LRU_get_free_block(): Document that the block is in the state
BUF_BLOCK_READY_FOR_USE.
buf_block_alloc(): Change the state of the block to BUF_BLOCK_MEMORY
and document it.
Replace those invocations of buf_block_alloc() with
buf_LRU_get_free_block() where the allocated block is used for buffer
pool input and output. However, temporary copies of B-tree pages
during reorganization are not used for file I/O, and such blocks are
still allocated with buf_block_alloc().
to the buddy system for allocating compressed pages and their descriptors.
buf_buddy_free_block(): New function: Deallocate the buffer frame.
buf_buddy_free(), buf_buddy_free_low(): Return void instead of a pointer
to a freed buffer frame.
compressed pages from the buffer pool.
Makefile.am: Add buf0buddy.h, buf0buddy.ic.
buf/Makefile.am: Add buf0buddy.c.
Introduce the constants BUF_BUDDY_LOW and BUF_BUDDY_SIZES.
buf_pool_t: Add zip_mutex and the lists zip_clean and zip_free[].
buf_page_get_mutex(): Return &buf_pool->zip_mutex instead of NULL.
buf_buddy_get_offset(), buf_buddy_get(), buf_buddy_get_slot(),
buf_buddy_alloc_free(), buf_buddy_alloc_free_low(): New functions.
(state == BUF_BLOCK_ZIP_PAGE). Make use of buf_page_in_file()
and buf_page_get_mutex().
buf_block_get_newest_modification(): Rename to
buf_page_get_newest_modification().
decompression from page_zip_des_t to buf_page_t, because the fields
needed in compression are modified without holding the block mutex.
All writes to bit-fields sharing a machine word must be protected
by the same mutex or rw-lock.
buf_block_t. Move the fields "hash" and "file_page_was_freed" from
buf_block_t to buf_page_t.
buf_page_in_file(): New function, for checking block state in assertions.
storage size from 16 to 3 bits.
page_zip_get_size(), page_zip_set_size(): New functions.
Replace direct references to page_zip_des_t:size with calls to
buf_block_get_zip_size(), page_zip_get_size(), and page_zip_set_size().
and uncompressed buffer pool pages.
buf_block_t: Replace page_zip, space, and offset with buf_page_t page.
Replace some integers with bit-fields.
enum buf_block_state: Rename to buf_page_state. Add BUF_BLOCK_ZIP_PAGE.
page_zip_des_t: Add the field "state". Make the integer fields bit-fields.
page_zip_copy(): Document which fields are copied.
and block->space with buf_block_get_state(block), buf_block_get_page_no(block),
and buf_block_get_space(block).
enum buf_block_state: Replaces the #define'd buf_block_t.state values.
buf_block_get_state(): New function.
buf_block_get_frame(): Add __attribute__((const)).
hash index, because it might occupy the chunk we would like to free.
TODO: In btr_search_check_free_space_in_heap(), release the block if
btr_search_latch is not immediately available.
buf_pool_shrink(): Split from buf_pool_resize().
btr_search_disabled: New variable, similar to srv_use_adaptive_hash_indexes
that was removed earlier.
btr_search_disable(): New function: disable and purge the adaptive hash index.
btr_search_enable(): New function: enable the adaptive hash index.
ha_clear(): New function: Empty a hash table and free the memory heaps.
assume that non-file pages are free. After trying to free or flush
file pages, do not proceed to buf_chunk_free(), because the calls will
temporarily release buf_pool->mutex. Do not flush if there are non-free
blocks, because it would not achieve anything.
enclose all related debug code in #ifdef UNIV_DEBUG_FILE_ACCESSES.
This should have no effect on the behaviour, as the symbol is
not defined by default. It only reduces the size of buf_block_t
and removes some assignments and debug functions.
buf_LRU_block_free_non_file_page(): Deallocate block->page_zip.data
to avoid ut_a(!block->page_zip.data) in buf_chunk_free().
buf_chunk_free(): Add the assertion ut_a(!block->in_LRU_list).
buf_pool_resize(): When shrinking the buffer pool and there are
non-free blocks in the candidate chunk, free the clean blocks
and move the dirty blocks to the end of the LRU list and request a flush.
Proceed if the chunk becomes free, and retry otherwise.
mysql.patch: Patch to change or add variables to MySQL
innodb.patch: Patch to make the master thread poll requests to resize
the buffer pool.
Replace srv_pool_size and innobase_buffer_pool_size
with srv_buf_pool_size, srv_buf_pool_old_size,
and srv_buf_pool_curr_size.
Add buf_chunk_t, a collection of buf_block_t.
On POSIX, use mmap() and munmap(). On Windows, use VirtualAlloc()
and VirtualFree(). Only on Netware, use ut_malloc_low() and ut_free().
The lower-level functions on POSIX and Windows allow InnoDB to return
memory to the operating system when the buffer pool is shrunk.
buf_pool_t: Remove n_frames, max_size, and blocks_of_frames.
The current buffer pool size is in curr_size.
buf_pool_init(): Remove parameter max_size.
buf_pool_get_max_size(), buf_pool_is_block(): Remove.
buf_block_align(): Do not assume that the buffer pool is allocated
in one chunk. Replace dependency on buf_pool->blocks_of_frames
with a call to buf_page_hash_get().
Replace buf_frame_t* guess with buf_block_t* guess in order to avoid
a buf_block_align() call.
trx_undo_t: Replace page_t* guess_page with buf_block_t* guess_block.
btr_search_t: Replace page_t* root_guess with buf_block_t* root_guess.
