- Read plug.in to fid the name of the engine to link with, does not have
to be same as engine dir
- Use engine dir when figuring out which libraries to build limbysqld with
- Read plug.in to fid the name of the engine to link with, does not have
to be same as engine dir
- Use engine dir when figuring out which libraries to build limbysqld with
2677 Vladislav Vaintroub 2008-11-04
CMakeLists.txt files cleanup
- remove SAFEMALLOC and SAFE_MUTEX definitions that were
present in *each* CMakeLists.txt. Instead, put them into top level
CMakeLists.txt, but disable on Windows, because
a) SAFEMALLOC does not add any functionality that is not already
present in Debug C runtime ( and 2 safe malloc one on top of the other
only unnecessarily slows down the server)
b)SAFE_MUTEX does not work on Windows and have been
explicitely disabled on Windows with #undef previously. Fortunately,
ntdll does pretty good job identifying l problems with
CRITICAL_SECTIONs.
DebugBreak()s on using uninited critical section, unlocking unowned
critical section)
-Also, remove occationally used -D_DEBUG (added by compiler
anyway)
sql/udf_example.c:
use unixish end of line
2677 Vladislav Vaintroub 2008-11-04
CMakeLists.txt files cleanup
- remove SAFEMALLOC and SAFE_MUTEX definitions that were
present in *each* CMakeLists.txt. Instead, put them into top level
CMakeLists.txt, but disable on Windows, because
a) SAFEMALLOC does not add any functionality that is not already
present in Debug C runtime ( and 2 safe malloc one on top of the other
only unnecessarily slows down the server)
b)SAFE_MUTEX does not work on Windows and have been
explicitely disabled on Windows with #undef previously. Fortunately,
ntdll does pretty good job identifying l problems with
CRITICAL_SECTIONs.
DebugBreak()s on using uninited critical section, unlocking unowned
critical section)
-Also, remove occationally used -D_DEBUG (added by compiler
anyway)
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
- Fix XtraDB to be built as a static library.
storage/xtradb/buf/buf0flu.c:
Fix previous merge error (was harmless except for on win32)
storage/xtradb/plug.in:
Make it sync with innobase/plug.in.disabled
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
- Define and pass compile time path variables as pre-processor definitions to
mimic the makefile build.
- Set new CMake version and policy requirements explicitly.
- Changed DATADIR to MYSQL_DATADIR to avoid conflicting definition in
Platform SDK header ObjIdl.h which also defines DATADIR.
- Define and pass compile time path variables as pre-processor definitions to
mimic the makefile build.
- Set new CMake version and policy requirements explicitly.
- Changed DATADIR to MYSQL_DATADIR to avoid conflicting definition in
Platform SDK header ObjIdl.h which also defines DATADIR.
Fixed the following problems:
1. cmake 2.6 warning because of a changed default on
how the dependencies to libraries with a specified
path are resolved.
Fixed by requiring cmake 2.6.
2. Removed an obsolete pre-NT4 hack including defining
Windows system defines to alter the behavior of windows.h.
3. Disabled warning C4065 on compiling sql_yacc.cc because
of a know incompatibility in some of the newer bison binaries.
Fixed the following problems:
1. cmake 2.6 warning because of a changed default on
how the dependencies to libraries with a specified
path are resolved.
Fixed by requiring cmake 2.6.
2. Removed an obsolete pre-NT4 hack including defining
Windows system defines to alter the behavior of windows.h.
3. Disabled warning C4065 on compiling sql_yacc.cc because
of a know incompatibility in some of the newer bison binaries.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
storage/innodb_plugin/handler/ha_innodb.cc:
Remove a Win32 workaround for current_thd.
The original problem that innodb plugin used
value of TLS variable across DLL boundaries is
solved in MySQL server (current_thd is a function
not TLS variable now)
storage/innodb_plugin/handler/handler0alter.cc:
Remove custom delay loader
storage/innodb_plugin/handler/handler0vars.h:
Remove custom delay loader
storage/innodb_plugin/handler/i_s.cc:
Remove custom delay loader
storage/innodb_plugin/handler/win_delay_loader.cc:
Remove custom delay loader
storage/innodb_plugin/plug.in:
Remove commented out MYSQL_PLUGIN_STATIC,
CMake would not parse that correctly
.bzrignore:
XtraDB compiles innodb in storage/xtradb instead of storage/innobase
CMakeLists.txt:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
libmysqld/CMakeLists.txt:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
storage/innobase/plug.in.disabled:
Disable building old InnoDB from storage/innobase/ directory.
We will keep the files around to avoid getting merge conflicts for every MySQL upstream
change to InnoDB.
storage/xtradb/CMakeLists.txt:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
storage/xtradb/COPYING:
Remove not needed file from XtraDB.
storage/xtradb/Makefile.am:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
storage/xtradb/Makefile.in:
Remove not needed file from XtraDB.
storage/xtradb/handler/ha_innodb.cc:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
storage/xtradb/plug.in:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
storage/xtradb/row/row0ins.c:
Take InnoDB code from storage/xtradb/ instead of storage/innobase/
