mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
mysql-test/suite/engines/funcs/r/rpl_row_until.result:
modified to accomodate the changes in corresponding
test file.
mysql-test/suite/engines/funcs/t/disabled.def:
removed from the list of disabled tests.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
fixed rpl.rpl_row_until and copied its content to
engines/funcs.rpl_row_until. The reason being both
are same tests but rpl.rpl_row_until is an
updated version.
mysql-test/suite/rpl/t/disabled.def:
removed from the list of disabled tests.
sql/sql_repl.cc:
Added a check to catch an improper combination
of arguements passed to 'START SLAVE UNTIL'. Earlier,
START SLAVE UNTIL MASTER_LOG_FILE='master-bin.000001',
MASTER_LOG_POS=561, RELAY_LOG_POS=12;
passed. It is now detected and an error is reported.
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
Problem
========
Replication breaks in the cases if the event length exceeds
the size of master Dump thread's max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet, on addition of the
max_event_header length exceeds the max_allowed_packet of the DUMP thread.
This causes the Dump thread to break replication and throw an error.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem is fixed in 2 steps:
1.) The Dump thread limit to read event is increased to the upper limit
i.e. Dump thread reads whatever gets logged in the binary log.
2.) On the slave side we increase the the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option (slave_max_allowed_packet)
included, is used to regulate the max_allowed_packet of the
slave thread (IO/SQL) by the DBA, and facilitates the sending of
large packets from the master to the slave.
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.cc:
The max_allowed_packet is not evaluated to the new option
slave_max_allowed_packet after the fix.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
sql/sql_repl.cc:
The dump thread's max_allowed_packet is set to the upper limit
which makes it independent and it now reads whatever gets
logged in the binary log.
Problem
========
SQL statements close to the size of max_allowed_packet produce binary
log events larger than max_allowed_packet.
The reason why this failure is occuring is because the event length is
more than the total size of the max_allowed_packet + max_event_header
length. Now since the event length exceeds this size master Dump
thread is unable to send the packet on to the slave.
That can happen e.g with row-based replication in Update_rows event.
Fix
====
The problem was fixed by increasing the max_allowed_packet for the
slave's threads (IO/SQL) by increasing it to 1GB.
This is done using the new server option included which is used to
regulate the max_allowed_packet of the slave thread (IO/SQL).
This causes the large packets to be received by the slave and apply
it successfully.
sql/log_event.h:
Added the new option in the log_event.h file.
sql/mysqld.cc:
Added a new option to the server.
sql/slave.cc:
Increasing the session max_allowed_packet to a large value ,
i.e. not taking global(max_allowed) into consideration, for the slave's threads.
PROBLEM:
Threads end-up in deadlock due to locks acquired as described
below,
con1: Run Query on a table.
It is important that this SELECT must back-off while
trying to open the t1 and enter into wait_for_condition().
The SELECT then is blocked trying to lock mysys_var->mutex
which is held by con3. The very significant fact here is
that mysys_var->current_mutex will still point to LOCK_open,
even if LOCK_open is no longer held by con1 at this point.
con2: Try dropping table used in con1 or query some table.
It will hold LOCK_open and be blocked trying to lock
kernel_mutex held by con4.
con3: Try killing the query run by con1.
It will hold THD::LOCK_thd_data belonging to con1 while
trying to lock mysys_var->current_mutex belonging to con1.
But current_mutex will point to LOCK_open which is held
by con2.
con4: Get innodb engine status
It will hold kernel_mutex, trying to lock THD::LOCK_thd_data
belonging to con1 which is held by con3.
So while technically only con2, con3 and con4 participate in the
deadlock, con1's mysys_var->current_mutex pointing to LOCK_open
is a vital component of the deadlock.
CYCLE = (THD::LOCK_thd_data -> LOCK_open ->
kernel_mutex -> THD::LOCK_thd_data)
FIX:
LOCK_thd_data has responsibility of protecting,
1) thd->query, thd->query_length
2) VIO
3) thd->mysys_var (used by KILL statement and shutdown)
4) THD during thread delete.
Among above responsibilities, 1), 2)and (3,4) seems to be three
independent group of responsibility. If there is different LOCK
owning responsibility of (3,4), the above mentioned deadlock cycle
can be avoid. This fix introduces LOCK_thd_kill to handle
responsibility (3,4), which eliminates the deadlock issue.
Note: The problem is not found in 5.5. Introduction MDL subsystem
caused metadata locking responsibility to be moved from TDC/TC to
MDL subsystem. Due to this, responsibility of LOCK_open is reduced.
As the use of LOCK_open is removed in open_table() and
mysql_rm_table() the above mentioned CYCLE does not form.
Revision ID for changes,
open_table() = dlenev@mysql.com-20100727133458-m3ua9oslnx8fbbvz
mysql_rm_table() = jon.hauglid@oracle.com-20101116100012-kxep9txz2fxy3nmw
The function mysql_show_binlog_events has a local stack variable
'LOG_INFO linfo;', which is assigned to thd->current_linfo, however
this variable goes out of scope and is destroyed before clean
thd->current_linfo.
The problem is solved by moving 'LOG_INFO linfo;' to function scope.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
Problem was setting DEBUG_SYNC twice in a row too fast in the test case; this
could cause the second setting to override the first before the code had time
to react to the first, causing the signal to get lost.
Fixed by waiting for the code to receive the first signal before overwriting
it in the test case.
There are two calls to read_log_event() on master in mysql_binlog_send().
Each call reads 19 bytes in this test case and the error of the second
read_log_event() is reported to the slave.
The second read_log_event() starts from position 94 (75 + 19) to 113
(75 + 19 + 19). Usually, there are two events in the binary log:
. 0 - 3 - Header
. 4 - 105 - Format Descriptor Event
. 106 - 304 - Query Event
and both reads fail because operations are reading from invalid positions
as expected.
However, mysql_binlog_send() does not use the same IO_CACHE that is used to
write into binary log (i.e. mysql_bin_log.log_file) for the hot binary log.
It opens the binary log file directly by calling open_binlog() and creates a
separated IO_CACHE. So there is a possibly that after a master has flushed
the binary log file, the content has been cached by the filesystem, and has
not updated the disk file. If this happens, then a slave will only see part
of the file, and thus the second read_log_event() will report event truncated
error.
To fix the problem, if the first read_log_event() has failed, we ensure that
the second one will try to read from the same position.
rpl_packet got a timeout failure sporadically on PB when stopping
slave. The real reason of this bug is that STOP SLAVE stopped
IO thread first and then stopped SQL thread. It was
possible that IO thread stopped after replicating part of a
transaction which SQL thread was executing. SQL thread would
be hung if the transaction could not be rolled back safely.
After this patch, STOP SLAVE will stop SQL thread first and then stop IO
thread, which guarantees that IO thread will fetch the reset of the
events of the transaction that SQL thread is executing, so that SQL
thread can finish the transaction if it cannot be rolled back safely.
Added below auxiliary files to make the test code neater.
restart_slave_sql.inc
rpl_connection_master.inc
rpl_connection_slave.inc
rpl_connection_slave1.inc
This patch adds options to annotate the binlog (and the mysqlbinlog
output) with the original SQL query for queries that are logged
using row-based replication.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
client/mysql.cc:
Meaningless pointer dereferences.
client/mysql_upgrade.c:
Check whether reading from the file succeeded.
extra/comp_err.c:
Unused.
extra/yassl/src/yassl_imp.cpp:
Skip instead of reading data that is discarded.
include/my_pthread.h:
Variable is only used in debug builds.
include/mysys_err.h:
Add new error messages.
mysys/errors.c:
Add new error message for permission related functions.
mysys/mf_iocache.c:
Variable is only checked under THREAD.
mysys/my_copy.c:
Raise a error if chmod or chown fails.
mysys/my_redel.c:
Raise a error if chmod or chown fails.
regex/engine.c:
Use a equivalent variable for the assert.
server-tools/instance-manager/instance_options.cc:
Unused.
sql/field.cc:
Unused.
sql/item.cc:
Unused.
sql/log.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
Adjust doxygen comment to the right function.
Pass message lenght to log function.
sql/mysqld.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
sql/partition_info.cc:
Unused.
sql/slave.cc:
No need to set pointer to the address of '\0'.
sql/spatial.cc:
Unused. Left for historical purposes.
sql/sql_acl.cc:
Unused.
sql/sql_base.cc:
Pointers are always set to the same variables.
sql/sql_parse.cc:
End statement if reading fails.
Store the buffer after it has actually been updated.
sql/sql_repl.cc:
No need to set pointer to the address of '\0'.
sql/sql_show.cc:
Put variable under the same ifdef block.
sql/udf_example.c:
Set null pointer flag appropriately.
storage/csv/ha_tina.cc:
Meaningless dereferences.
storage/example/ha_example.cc:
Return the error since it's available.
storage/myisam/mi_locking.c:
Remove unused and dead code.
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
mysql-test/suite/rpl/r/rpl_packet.result:
update result file
mysql-test/suite/rpl/t/rpl_packet.test:
Add test that verifies that @@session.max_allowed_packet does not change
when issuing SHOW BINLOG EVENTS.
Make previous sub-test clean up.
Add comments listing the bugs in this test case.
sql/sql_repl.cc:
Restore the old value of thd->variables.max_allowed_packet at the
end of mysql_binlog_send and mysql_show_binlog_events.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
BUILD/SETUP.sh:
Remove flags that are implied by -Wall and -Wextra.
Do not warn about unused parameters in C++.
BUILD/check-cpu:
Print only the compiler version instead of verbose banner.
Although the option is gcc specific, the check was only
being used for GCC specific checks anyway.
client/mysql.cc:
bcmp is no longer defined.
client/mysqltest.cc:
Pass a string to function expecting a format string.
Replace use of bcmp with memcmp.
cmd-line-utils/readline/Makefile.am:
Always define _GNU_SOURCE when compiling GNU readline.
Required to make certain prototypes visible.
cmd-line-utils/readline/input.c:
Condition for the code to be meaningful.
configure.in:
Remove check for bcmp.
extra/comp_err.c:
Use appropriate type.
extra/replace.c:
Replace use of bcmp with memcmp.
extra/yassl/src/crypto_wrapper.cpp:
Do not ignore the return value of fgets. Retrieve the file
position if fgets succeed -- if it fails, the function will
bail out and return a error.
extra/yassl/taocrypt/include/blowfish.hpp:
Use a single array instead of accessing positions of the sbox_
through a subscript to pbox_.
extra/yassl/taocrypt/include/runtime.hpp:
One definition of such functions is enough.
extra/yassl/taocrypt/src/aes.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/algebra.cpp:
Rename arguments to avoid shadowing related warnings.
extra/yassl/taocrypt/src/blowfish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/integer.cpp:
Do not define type within a anonymous union.
Use a variable to return a value instead of
leaving the result in a register -- compiler
does not know the logic inside the asm.
extra/yassl/taocrypt/src/misc.cpp:
Define handler for pure virtual functions.
Remove unused code.
extra/yassl/taocrypt/src/twofish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/testsuite/test.hpp:
Function must have C language linkage.
include/m_string.h:
Remove check which relied on bcmp being defined -- they weren't
being used as bcmp is only visible when _BSD_SOURCE is defined.
include/my_bitmap.h:
Remove bogus helpers which were used only in a few files and
were causing warnings about dead code.
include/my_global.h:
Due to G++ bug, always silence false-positive uninitialized
variables warnings when compiling C++ code with G++.
Remove bogus helper.
libmysql/Makefile.shared:
Remove built-in implementation of bcmp.
mysql-test/lib/My/SafeProcess/safe_process.cc:
Cast pid to largest possible type for a process identifier.
mysys/mf_loadpath.c:
Leave space of the ending nul.
mysys/mf_pack.c:
Replace bcmp with memcmp.
mysys/my_bitmap.c:
Dead code removal.
mysys/my_gethwaddr.c:
Remove unused variable.
mysys/my_getopt.c:
Silence bogus uninitialized variable warning.
Do not cast away the constant qualifier.
mysys/safemalloc.c:
Cast to expected type.
mysys/thr_lock.c:
Silence bogus uninitialized variable warning.
sql/field.cc:
Replace bogus helper with a more appropriate logic which is
used throughout the code.
sql/item.cc:
Remove bogus logical condition which always evaluates to TRUE.
sql/item_create.cc:
Simplify code to avoid signedness related warnings.
sql/log_event.cc:
Replace use of bcmp with memcmp.
No need to use helpers for simple bit operations.
sql/log_event_old.cc:
Replace bmove_align with memcpy.
sql/mysqld.cc:
Move use declaration of variable to the ifdef block where it
is used. Remove now-unnecessary casts and arguments.
sql/set_var.cc:
Replace bogus helpers with simple and classic bit operations.
sql/slave.cc:
Cast to expected type and silence bogus warning.
sql/sql_class.h:
Don't use enum values as bit flags, the supposed type safety is
bogus as the combined bit flags are not a value in the enumeration.
sql/udf_example.c:
Only declare variable when necessary.
sql/unireg.h:
Replace use of bmove_align with memcpy.
storage/innobase/os/os0file.c:
Silence bogus warning.
storage/myisam/mi_open.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
storage/myisam/mi_page.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
strings/bcmp.c:
Remove built-in bcmp.
strings/ctype-ucs2.c:
Silence bogus warning.
tests/mysql_client_test.c:
Use a appropriate type as expected by simple_command().
Fixed some bugs introduced in 5.1.47
Disabled some tests until we have merged with latest Xtradb
configure.in:
Added testing if valgrind/memcheck.h exists
storage/pbxt/src/ha_pbxt.cc:
LOCK_plugin is not anymore locked in init
at mf_iocache.c, line 1722
The slave crashed while two threads: IO thread and user thread
raced for the same mutex (the append_buffer_lock protecting the
relay log's IO_CACHE). The IO thread was trying to flush the
cache, and for that was grabbing the append_buffer_lock.
However, the other thread was closing and reopening the relay log
when the IO thread tried to lock. Closing and reopening the log
includes destroying and reinitialising the IO_CACHE
mutex. Therefore, the IO thread tried to lock a destroyed mutex.
We fix this by backporting patch for BUG#50364 which fixed this
bug in mysql server 5.5+. The patch deploys missing
synchronization when flush_master_info is called and the relay
log is flushed by the IO thread. In detail the patch backports
revision (from mysql-trunk):
- luis.soares@sun.com-20100203165617-b1yydr0ee24ycpjm
This patch already includes the post-push fix also in BUG#50364:
- luis.soares@sun.com-20100222002629-0cijwqk6baxhj7gr
When issuing a 'CHANGE MASTER TO' statement, key elements of the previous
state, namely the host, port, the master_log_file and the master_log_pos
are dumped into the error log.
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
a pattern of usage DEBUG_SYNC for replication testing is provided.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
results are changed.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
limiting the test to run only with MIXED binlog-format as the test last
some 10 secs sensitively contributing to the total of tests run.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based.
sql/debug_sync.cc:
adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code.
sql/debug_sync.h:
externalizing debug_sync_set_action().
sql/item_func.cc:
purging sources from DBUG_SYNC_POINT.
sql/mysql_priv.h:
purging sources from DBUG_SYNC_POINT.
sql/slave.cc:
rewriting failure simulations to base on DEBUG_SYNC rather than GET_LOCK()-based DBUG_SYNC_POINT.
sql/sql_repl.cc:
removing an orphan failure simulation line because no counterpart in tests existing.
logging is disabled
The server would hit an assertion because of a DBUG violation.
There was a missing DBUG_RETURN and instead a plain return
was used.
This patch replaces the return with DBUG_RETURN.
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
This is a re-commit of Monty's merge to eliminate an extra commit from
MySQL-5.1.42 that was accidentally included in the merge.
This is a merge of the MySQL 5.1.41 clone-off (clone-5.1.41-build). In
case there are any extra changes done before final MySQL 5.1.41
release, these will need to be merged later before MariaDB 5.1.41
release.
But there is no Last_IO_Error reported.
On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.
On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.
In both cases, however, there was no Last_IO_Error reported.
This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.
sql/sql_repl.cc:
The master send the Specific reasons instead of "error reading log entry" to the slave which is requesting a dump.
if an fatal error is returned by read_log_event function.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
