PLATFORM= MACOSX10.6 X86_64 MAX
Problem: The test was failing on pb2's mac machine because
it was not cleaned up properly. The test checks if
the command 'start slave until' throws a proper
error when issued with a wrong number/type of
parameters. After this,the replication stream was
stopped using the include file 'rpl_end.inc'.
The errors thrown earlier left the slave in an
inconsistent state to be closed by the include
file which was caught by the mac machine.
Fix: Started slave by invoking start_slave.inc to have a
working slave before calling rpl_reset.inc
Problem: The test file was not in a good shape. It tested
start slave until relay log file/pos combination
wrongly. A couple of commands were executed at
master and replicated at slave. Next, the
coordinates in terms of relay log file and pos
were noted down followed by reset slave and start
slave until saved relay log file/pos. Reset slave
deletes all relay log files and makes the slave
forget its replication position. So, using the
saved coordiantes after reset slave is wrong.
Fix: Split the test in two parts:
a) Test for start slave until master log file/pos and
checking for correct errors in the failure
scenarios.
b) Test for start slave until relay log file/pos.
Problem: The variables auto_increment_increment and
auto_increment_offset were set in the the include
file rpl_init.inc. This was only configured for
some connections that are rarely used by test
cases, so likely that it will cause confusion.
If replication tests want to setup these variables
they should do so explicitly.
Fix:
a) Removed code to set the variables
auto_increment_increment and auto_increment_offset
in the include file.
b) Updated tests files using the same.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
Problem: Sys_vars suite is disabled in mysql-5.1 branch.
Fix: To enable sys_vars suite in mysql-5.1, add it in
mysql-test-run.pl file and also sys_vars suite should be
added to Makefile.am inorder to get that test directory
SUITE FOR 5.1
SYS_VARS suite is not enabled in MTR by default
run. Enabling it with this check-in.
mysql-test/suite/sys_vars/t/disabled.def:
Till the bugs are fixed, disabling the failed test scripts
innodb_bug12400341.test is disabled for valgrind daily test.
It might be affected by the previous test's undo slots existing,
because of slower execution.
Backport of fix for Bug#13581962
mysql-test/r/cast.result:
Added test result for Bug#13581962,Bug#14096619
mysql-test/r/ctype_utf8mb4.result:
Added test result for Bug#13581962,Bug#14096619
mysql-test/t/cast.test:
Added test case for Bug#13581962,Bug#14096619
mysql-test/t/ctype_utf8mb4.test:
Added test case for Bug#13581962,Bug#14096619
sql/item_func.h:
limit max length by MY_INT64_NUM_DECIMAL_DIGITS
Backport of Bug#13581962
mysql-test/r/cast.result:
Added test result for Bug#13581962,Bug#14096619
mysql-test/t/cast.test:
Added test case for Bug#13581962,Bug#14096619
sql/item_func.h:
limit max length by MY_INT64_NUM_DECIMAL_DIGITS
Due to an internal change in the server code in between 5.1 and 5.5
(wl#2649) the hash function used in KEY partitioning changed
for numeric and date/time columns (from binary hash calculation
to character based hash calculation).
Also enum/set changed from latin1 ci based hash calculation to
binary hash between 5.1 and 5.5. (bug#11759782).
These changes makes KEY [sub]partitioned tables on any of
the affected column types incompatible with 5.5 and above,
since the calculation of partition id differs.
Also since InnoDB asserts that a deleted row was previously
read (positioned), the server asserts on delete of a row that
is in the wrong partition.
The solution for this situation is:
1) The partitioning engine will check that delete/update will go to the
partition the row was read from and give an error otherwise, consisting
of the rows partitioning fields. This will avoid asserts in InnoDB and
also alert the user that there is a misplaced row. A detailed error
message will be given, including an entry to the error log consisting
of both table name, partition and row content (PK if exists, otherwise
all partitioning columns).
2) A new optional syntax for KEY () partitioning in 5.5 is allowed:
[SUB]PARTITION BY KEY [ALGORITHM = N] (list_of_cols)
Where N = 1 uses the same hashing as 5.1 (Numeric/date/time fields uses
binary hashing, ENUM/SET uses charset hashing) N = 2 uses the same
hashing as 5.5 (Numeric/date/time fields uses charset hashing,
ENUM/SET uses binary hashing). If not set on CREATE/ALTER it will
default to 2.
This new syntax should probably be ignored by NDB.
3) Since there is a demand for avoiding scanning through the full
table, during upgrade the ALTER TABLE t PARTITION BY ... command is
considered a no-op (only .frm change) if everything except ALGORITHM
is the same and ALGORITHM was not set before, which allows manually
upgrading such table by something like:
ALTER TABLE t PARTITION BY KEY ALGORITHM = 1 () or
ALTER TABLE t PARTITION BY KEY ALGORITHM = 2 ()
4) Enhanced partitioning with CHECK/REPAIR to also check for/repair
misplaced rows. (Also works for ALTER TABLE t CHECK/REPAIR PARTITION)
CHECK FOR UPGRADE:
If the .frm version is < 5.5.3
and uses KEY [sub]partitioning
and an affected column type
then it will fail with an message:
KEY () partitioning changed, please run:
ALTER TABLE `test`.`t1` PARTITION BY KEY ALGORITHM = 1 (a)
PARTITIONS 12
(i.e. current partitioning clause, with the addition of
ALGORITHM = 1)
CHECK without FOR UPGRADE:
if MEDIUM (default) or EXTENDED options are given:
Scan all rows and verify that it is in the correct partition.
Fail for the first misplaced row.
REPAIR:
if default or EXTENDED (i.e. not QUICK/USE_FRM):
Scan all rows and every misplaced row is moved into its correct
partitions.
5) Updated mysqlcheck (called by mysql_upgrade) to handle the
new output from CHECK FOR UPGRADE, to run the ALTER statement
instead of running REPAIR.
This will allow mysql_upgrade (or CHECK TABLE t FOR UPGRADE) to upgrade
a KEY [sub]partitioned table that has any affected field type
and a .frm version < 5.5.3 to ALGORITHM = 1 without rebuild.
Also notice that if the .frm has a version of >= 5.5.3 and ALGORITHM
is not set, it is not possible to know if it consists of rows from
5.1 or 5.5! In these cases I suggest that the user does:
(optional)
LOCK TABLE t WRITE;
SHOW CREATE TABLE t;
(verify that it has no ALGORITHM = N, and to be safe, I would suggest
backing up the .frm file, to be used if one need to change to another
ALGORITHM = N, without needing to rebuild/repair)
ALTER TABLE t <old partitioning clause, but with ALGORITHM = N>;
which should set the ALGORITHM to N (if the table has rows from
5.1 I would suggest N = 1, otherwise N = 2)
CHECK TABLE t;
(here one could use the backed up .frm instead and change to a new N
and run CHECK again and see if it passes)
and if there are misplaced rows:
REPAIR TABLE t;
(optional)
UNLOCK TABLES;
PROPERLY QUOTED IN BINLOG FILE
Problem: In load data file query, User variables are allowed
inside "Into_list" and "Set_list". These user variables used
inside these two lists are not properly guarded with backticks
while server is writting into binlog. Hence user variable names
like a` cannot be used in this context.
Fix: Properly quote these variables while
writting into binlog
mysql-test/r/func_compress.result:
changing result file
mysql-test/r/variables.result:
changing result file
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
changing result file
sql/item_func.cc:
Quote the user variable items
buf_page_get_gen(): Do not attempt to decompress a compressed-only
page when mode == BUF_PEEK_IF_IN_POOL. This mode is only being used by
btr_search_drop_page_hash_when_freed(). There cannot be any adaptive
hash index pointing to a page that does not exist in uncompressed
format in the buffer pool.
innodb_buffer_pool_evict_update(): New function for debug builds, to handle
SET GLOBAL innodb_buffer_pool_evicted='uncompressed'
by evicting all uncompressed page frames of compressed tablespaces
from the buffer pool.
rb#1873 approved by Jimmy Yang
The test, binlog.binlog_spurious_ddl_errors was failing on pb2 at the statement
"UNINSTALL PLUGIN example;" with this warning:
"Warning 1620 Plugin is busy and will be uninstalled on shutdown "
Fix
Spurious warnings occur in the test since we do not empty the Query cache,
used by the example plugin at the time of creating tables using the plugin.
Hence, the query chache is flushed before uninstalling the plugin.
Also, as part of running the test across platforms, the plugin installation
script is changed.
Problem: When a view, with a specific character set and collation,
is created on another view with a different character set and collation the
dump restoration results in an illegal mix of collations error.
SOLUTION: To avoid this confusion of collations, the create table datatype
being used is hardcoded as "tinyint NOT NULL". This will not matter as the table
created will be dropped at runtime and specifically tinyint is used to
avoid hitting the row size conflicts.
WITH A VARIABLE AND ORDER BY
Bug#16035412 MYSQL SERVER 5.5.29 WRONG SORTING USING COMPLEX INDEX
This is a fix for a regression introduced by Bug#12667154:
Bug#12667154 attempted to fix a performance problem with subqueries
that did filesort. For doing filesort, the optimizer creates a quick
select object to use when building the sort index. This quick select
object was deleted after the first call to create_sort_index(). Thus,
for queries where the subquery was executed multiple times, the quick
object was only used for the first execution. For all later executions
of the subquery, filesort used a complete table scan for building the
sort index. The fix for Bug#12667154 tried to fix this by not deleting
the quick object after the first execution of create_sort_index() so
that it would be re-used for building the sort index by the following
executions of the subquery.
This regression introduced in Bug#12667154 is that due to not deleting
the quick select object after building the sort index, the quick
object could in some cases be used also during the second phase of the
execution of the subquery instead of using the created sort
index. This caused wrong results to be returned.
The fix for this issue is to delete the reference to the select object
after it has been used in create_sort_index(). In this way the select
and quick objects will not be available when doing the second phase
of the execution of the select operation. To ensure that the select
object can be re-used for the following executions of the subquery
we make a copy of the select pointer. This is used for restoring the
select object after the select operation is completed.
mysql-test/suite/innodb/r/innodb_mysql.result:
Changed explain output: The explain now contains "Using where" since we
have restored the select pointer after doing the filesort operation.
sql/sql_select.cc:
Change create_sort_index() so that it always sets the pointer to
the select object to NULL. This is done in order to avoid that the
select->quick object can be used when execution the main part of
the select operation.
sql/sql_select.h:
New member in JOIN_TAB: saved_select. Used by create_sort_index to
make a backup copy of the select pointer.
WITH A VARIABLE AND ORDER BY
Bug#16035412 MYSQL SERVER 5.5.29 WRONG SORTING USING COMPLEX INDEX
This is a fix for a regression introduced by Bug#12667154:
Bug#12667154 attempted to fix a performance problem with subqueries
that did filesort. For doing filesort, the optimizer creates a quick
select object to use when building the sort index. This quick select
object was deleted after the first call to create_sort_index(). Thus,
for queries where the subquery was executed multiple times, the quick
object was only used for the first execution. For all later executions
of the subquery, filesort used a complete table scan for building the
sort index. The fix for Bug#12667154 tried to fix this by not deleting
the quick object after the first execution of create_sort_index() so
that it would be re-used for building the sort index by the following
executions of the subquery.
This regression introduced in Bug#12667154 is that due to not deleting
the quick select object after building the sort index, the quick
object could in some cases be used also during the second phase of the
execution of the subquery instead of using the created sort
index. This caused wrong results to be returned.
The fix for this issue is to delete the reference to the select object
after it has been used in create_sort_index(). In this way the select
and quick objects will not be available when doing the second phase
of the execution of the select operation. To ensure that the select
object can be re-used for the following executions of the subquery
we make a copy of the select pointer. This is used for restoring the
select object after the select operation is completed.
mysql-test/suite/innodb/r/innodb_mysql.result:
Changed explain output: The explain now contains "Using where" since we
have restored the select pointer after doing the filesort operation.
sql/sql_select.cc:
Change create_sort_index() so that it always sets the pointer to
the select object to NULL. This is done in order to avoid that the
select->quick object can be used when execution the main part of
the select operation.
sql/sql_select.h:
New member in JOIN_TAB: saved_select. Used by create_sort_index to
make a backup copy of the select pointer.
INCORRECT RESULTS
This is a backport of fix for Bug#13068506.
mysql-test/r/join_outer.result:
Added test result for Bug#13068506
mysql-test/t/join_outer.test:
Added test case for Bug#13068506
sql/item.h:
Implement Item_outer_ref::not_null_tables()
Analysis:
On solaris, killing a connection which waits on debug sync
(waits on condition variable) is neglected. Subsequent kill
connection to that thread succeeds. Debug sync code is not
included in release build hence it is not an customer issue.
Also verified that except this case, other cases succeed in
main.kill test script. So moving this test to experimental
state on solaris platform only in mysql-5.5 branch.
Before this fix, configuring the server with:
- performance_schema_events_waits_history_size=0
- performance_schema_events_waits_history_long_size=0
could cause a crash in the performance schema.
These settings to 0 are intended to be valid and supported,
and are in fact working properly in mysql 5.6 and up already.
This fix backports the code fix and test cases from mysql 5.6
to the mysql 5.5 release.
Problem:
Before the ALTER TABLE statement, the array
dict_index_t::stat_n_diff_key_vals had proper values calculated
and updated. But after the ALTER TABLE statement, all the values
of this array is 0.
Because of this statistics returned by innodb_rec_per_key() is
different before and after the ALTER TABLE statement. Running the
ANALYZE TABLE command populates the statistics correctly.
Solution:
After ALTER TABLE statement, set the flag dict_table_t::stat_initialized
correctly so that the table statistics will be recalculated properly when
the table is next loaded. But note that we still don't choose the loose
index scans. This fix only ensures that an ALTER TABLE does not change
the optimizer plan.
rb://1639 approved by Marko and Jimmy.
patch to fix post push falures in pb2
BUG#15872504 - REMOVE MYSQL-TEST/INCLUDE/GET_BINLOG_DUMP_THREAD_ID.INC
=== Problem ===
The file named "mysql-test/include/get_binlog_dump_thread_id.inc" is not
used anywhere. In any case, this file does wrong things in the wrong way:
1) The file seems to assume there is only one dump thread, but there may
be many.
2) you can get this information in a much easier way using the command:
"select thread_id from threads where processlist_command="Binlog Dump";"
=== Fix ===
removed file 'mysql-test/include/get_binlog_dump_thread_id.inc'
RPL_ROW_UNTIL TIMES OUT
patch to fix post push falures in pb2
mysql-test/suite/rpl/r/rpl_row_until.result:
changes to account for the changes made in
corresponding test file.
mysql-test/suite/rpl/t/disabled.def:
disabled test in macosx
mysql-test/suite/rpl/t/rpl_row_until.test:
replaced static relayy log file by an mtr variable
which saves the name of relay log file.
