on response to COM_STMT_EXECUTE
The test cases like the following one
delimiter |;
CREATE PROCEDURE SP001()
BEGIN
DECLARE C1 CURSOR FOR SELECT 1;
OPEN C1;
SELECT 1;
CLOSE C1;
CLOSE C1;
END|
delimiter ;|
--error 1326
call SP001();
are failed since processing of ERR packet was missed by mysqltest
in case it is run with --ps-protocol
Additionally, the test sp-error was changed to don't run multi-statements
since they are not supported by PS protocol
Withing this task the following changes were made:
- Added sending of metadata info in prepare phase for the admin related
command (check table, checksum table, repair, optimize, analyze).
- Refactored implmentation of HELP command to support its execution in
PS mode
- Added support for execution of LOAD INTO and XA- related statements
in PS mode
- Modified mysqltest.cc to run statements in PS mode unconditionally
in case the option --ps-protocol is set. Formerly, only those statements
were executed using PS protocol that matched the hard-coded regular expression
- Fixed the following issues:
The statement
explain select (select 2)
executed in regular and PS mode produces different results:
MariaDB [test]> prepare stmt from "explain select (select 2)";
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> execute stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| 1 | PRIMARY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
2 rows in set (0,000 sec)
MariaDB [test]> explain select (select 2);
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
| 1 | SIMPLE | NULL | NULL | NULL | NULL | NULL | NULL | NULL | No tables used |
+------+-------------+-------+------+---------------+------+---------+------+------+----------------+
1 row in set, 1 warning (0,000 sec)
In case the statement
CREATE TABLE t1 SELECT * FROM (SELECT 1 AS a, (SELECT a+0)) a
is run in PS mode it fails with the error
ERROR 1054 (42S22): Unknown column 'a' in 'field list'.
- Uniform handling of read-only variables both in case the SET var=val
statement is executed as regular or prepared statememt.
- Fixed assertion firing on handling LOAD DATA statement for temporary tables
- Relaxed assert condition in the function lex_end_stage1() by adding
the commands SQLCOM_ALTER_EVENT, SQLCOM_CREATE_PACKAGE,
SQLCOM_CREATE_PACKAGE_BODY to a list of supported command
- Removed raising of the error ER_UNSUPPORTED_PS in the function
check_prepared_statement() for the ALTER VIEW command
- Added initialization of the data memember st_select_lex_unit::last_procedure
(assign NULL value) in the constructor
Without this change the test case main.ctype_utf8 fails with the following
report in case it is run with the optoin --ps-protocol.
mysqltest: At line 2278: query 'VALUES (_latin1 0xDF) UNION VALUES(_utf8'a' COLLATE utf8_bin)' failed: 2013: Lost connection
- The following bug reports were fixed:
MDEV-24460: Multiple rows result set returned from stored
routine over prepared statement binary protocol is
handled incorrectly
CONC-519: mariadb client library doesn't handle server_status and
warnign_count fields received in the packet
COM_STMT_EXECUTE_RESPONSE.
Reasons for these bug reports have the same nature and caused by
missing loop iteration on results sent by server in response to
COM_STMT_EXECUTE packet.
Enclosing of statements for processing of COM_STMT_EXECUTE response
in the construct like
do
{
...
} while (!mysql_stmt_next_result());
fixes the above mentioned bug reports.
* read_command_buf is a pointer now, sizeof() no longer reflects its
length, read_command_buflen is.
* my_safe_print_str() prints multiple screens of '\0' bytes after the
query end and up to read_command_buflen. Use fprintf() instead.
* when setting connection->name to "-closed_connection-" update
connection->name_len to match.
- Major rewrite of ddl_log.cc and ddl_log.h
- ddl_log.cc described in the beginning how the recovery works.
- ddl_log.log has unique signature and is dynamic. It's easy to
add more information to the header and other ddl blocks while still
being able to execute old ddl entries.
- IO_SIZE for ddl blocks is now dynamic. Can be changed without affecting
recovery of old logs.
- Code is more modular and is now usable outside of partition handling.
- Renamed log file to dll_recovery.log and added option --log-ddl-recovery
to allow one to specify the path & filename.
- Added ddl_log_entry_phase[], number of phases for each DDL action,
which allowed me to greatly simply set_global_from_ddl_log_entry()
- Changed how strings are stored in log entries, which allows us to
store much more information in a log entry.
- ddl log is now always created at start and deleted on normal shutdown.
This simplices things notable.
- Added probes debug_crash_here() and debug_simulate_error() to simply
crash testing and allow crash after a given number of times a probe
is executed. See comments in debug_sync.cc and rename_table.test for
how this can be used.
- Reverting failed table and view renames is done trough the ddl log.
This ensures that the ddl log is tested also outside of recovery.
- Added helper function 'handler::needs_lower_case_filenames()'
- Extend binary log with Q_XID events. ddl log handling is using this
to check if a ddl log entry was logged to the binary log (if yes,
it will be deleted from the log during ddl_log_close_binlogged_events()
- If a DDL entry fails 3 time, disable it. This is to ensure that if
we have a crash in ddl recovery code the server will not get stuck
in a forever crash-restart-crash loop.
mysqltest.cc changes:
- --die will now replace $variables with their values
- $error will contain the error of the last failed statement
storage engine changes:
- maria_rename() was changed to be more robust against crashes during
rename.
This change removed 68 explict strlen() calls from the code.
The following renames was done to ensure we don't use the old names
when merging code from earlier releases, as using the new variables
for print function could result in crashes:
- charset->csname renamed to charset->cs_name
- charset->name renamed to charset->coll_name
Almost everything where mechanical changes except:
- Changed to use the new Protocol::store(LEX_CSTRING..) when possible
- Changed to use field->store(LEX_CSTRING*, CHARSET_INFO*) when possible
- Changed to use String->append(LEX_CSTRING&) when possible
Other things:
- There where compiler issues with ensuring that all character set names
points to the same string: gcc doesn't allow one to use integer constants
when defining global structures (constant char * pointers works fine).
To get around this, I declared defines for each character set name
length.
This patch changes the main name of 3 byte character set from utf8 to
utf8mb3. New old_mode UTF8_IS_UTF8MB3 is added and set TRUE by default,
so that utf8 would mean utf8mb3. If not set, utf8 would mean utf8mb4.
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
One should not change the program arguments!
This change also reduces warnings from the icc compiler.
Almost all changes are just syntax changes (adding const to
'get_one_option function' declarations).
Other changes:
- Added a few cast of 'argument' from 'const char*' to 'char *'. This
was mainly in calls to 'external' functions we don't have control of.
- Ensure that all reset of 'password command line argument' are similar.
(In almost all cases it was just adding a comment and a cast)
- In mysqlbinlog.cc and mysqld.cc there was a few cases that changed
the command line argument. These places where changed to instead allocate
the option in a MEM_ROOT to avoid changing the argument. Some of this
code was changed to ensure that different programs did parsing the
same way. Added a test case for the changes in mysqlbinlog.cc
- Changed a few variables that took their value from command line options
from 'char *' to 'const char *'.
It is already in libmariadb, and server (also that client in server)
does not need it.
It does not work in embedded either since it relies on non-blocking sockets
Shutdown of mtr tests may be too impatient, esp on CI environment where
10 seconds of `arg` of `shutdown_server arg` may not be enough for the clean
shutdown to complete.
This is fixed to remove explicit non-zero timeout argument to
`shutdown_server` from all mtr tests. mysqltest computes 60 seconds default
value for the timeout for the argless `shutdown_server` command.
This policy is additionally ensured with a compile time assert.
- Some of the bug fixes are backports from 10.5!
- The fix in innobase/fil/fil0fil.cc is just a backport to get less
error messages in mysqld.1.err when running with valgrind.
- Renamed HAVE_valgrind_or_MSAN to HAVE_valgrind
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
The test main.mysqltest could crash or hang with
cmake -DWITH_ASAN=ON builds. The reason appears to be
a memory leak, which was found out by manually invoking
echo --replace_regex a > file
ASAN_OPTIONS=log_path=/dev/shm/asan mysqltest ... < file
and then examining the /dev/shm/asan.* file.
Valgrind only seems to complain about memcmp() operations that
actually end up reading uninitialized data, while MemorySanitizer
requires that the entire length of both buffers be defined.
