Sometimes innodb_data_file_size_debug was reported as INT UNSIGNED
instead of BIGINT UNSIGNED. Make it uint instead of ulong to get
a more deterministic result.
InnoDB shutdown failed to properly take fil_crypt_thread() into account.
The encryption threads were signalled to shut down together with other
non-critical tasks. This could be much too early in case of slow shutdown,
which could need minutes to complete the purge. Furthermore, InnoDB
failed to wait for the fil_crypt_thread() to actually exit before
proceeding to the final steps of shutdown, causing the race conditions.
Furthermore, the log_scrub_thread() was shut down way too early.
Also it should remain until the SRV_SHUTDOWN_FLUSH_PHASE.
fil_crypt_threads_end(): Remove. This would cause the threads to
be terminated way too early.
srv_buf_dump_thread_active, srv_dict_stats_thread_active,
lock_sys->timeout_thread_active, log_scrub_thread_active,
srv_monitor_active, srv_error_monitor_active: Remove a race condition
between startup and shutdown, by setting these in the startup thread
that creates threads, not in each created thread. In this way, once the
flag is cleared, it will remain cleared during shutdown.
srv_n_fil_crypt_threads_started, fil_crypt_threads_event: Declare in
global rather than static scope.
log_scrub_event, srv_log_scrub_thread_active, log_scrub_thread():
Declare in static rather than global scope. Let these be created by
log_init() and freed by log_shutdown().
rotate_thread_t::should_shutdown(): Do not shut down before the
SRV_SHUTDOWN_FLUSH_PHASE.
srv_any_background_threads_are_active(): Remove. These checks now
exist in logs_empty_and_mark_files_at_shutdown().
logs_empty_and_mark_files_at_shutdown(): Shut down the threads in
the proper order. Keep fil_crypt_thread() and log_scrub_thread() alive
until SRV_SHUTDOWN_FLUSH_PHASE, and check that they actually terminate.
fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
Replace all exit() calls in InnoDB with abort() [possibly via ut_a()].
Calling exit() in a multi-threaded program is problematic also for
the reason that other threads could see corrupted data structures
while some data structures are being cleaned up by atexit() handlers
or similar.
In the long term, all these calls should be replaced with something
that returns an error all the way up the call stack.
Make some global fil_crypt_ variables static.
fil_close(): Call mutex_free(&fil_system->mutex) also in InnoDB, not
only in XtraDB. In InnoDB, sync_close() was called before fil_close().
innobase_shutdown_for_mysql(): Call fil_close() before sync_close(),
similar to XtraDB shutdown.
fil_space_crypt_cleanup(): Call mutex_free() to pair with
fil_space_crypt_init().
fil_crypt_threads_cleanup(): Call mutex_free() to pair with
fil_crypt_threads_init().
Reduce the number of calls to encryption_get_key_get_latest_version
when doing key rotation with two different methods:
(1) We need to fetch key information when tablespace not yet
have a encryption information, invalid keys are handled now
differently (see below). There was extra call to detect
if key_id is not found on key rotation.
(2) If key_id is not found from encryption plugin, do not
try fetching new key_version for it as it will fail anyway.
We store return value from encryption_get_key_get_latest_version
call and if it returns ENCRYPTION_KEY_VERSION_INVALID there
is no need to call it again.
Analysis: By design InnoDB was reading first page of every .ibd file
at startup to find out is tablespace encrypted or not. This is
because tablespace could have been encrypted always, not
encrypted newer or encrypted based on configuration and this
information can be find realible only from first page of .ibd file.
Fix: Do not read first page of every .ibd file at startup. Instead
whenever tablespace is first time accedded we will read the first
page to find necessary information about tablespace encryption
status.
TODO: Add support for SYS_TABLEOPTIONS where all table options
encryption information included will be stored.
Backport pull request #125 from grooverdan/MDEV-8923_innodb_buffer_pool_dump_pct to 10.0
WL#6504 InnoDB buffer pool dump/load enchantments
This patch consists of two parts:
1. Dump only the hottest N% of the buffer pool(s)
2. Prevent hogging the server duing BP load
From MySQL - commit b409342c43ce2edb68807100a77001367c7e6b8e
Add testcases for innodb_buffer_pool_dump_pct_basic.
Part of the code authored by Daniel Black
- Make accelerated checksum available to InnoDB and XtraDB.
- Fall back to slice-by-eight if not available. The mode used is printed on startup.
- Will only build on POWER systems at the moment until CMakeLists are modified
to only add the crc32_power8/ files when building on POWER.
running MySQL-5.7 unittest/gunit/innodb/ut0crc32-t
Before:
1..2
Using software crc32 implementation, CPU is little-endian
ok 1
Using software crc32 implementation, CPU is little-endian
normal CRC32: real 0.148006 sec
normal CRC32: user 0.148000 sec
normal CRC32: sys 0.000000 sec
big endian CRC32: real 0.144293 sec
big endian CRC32: user 0.144000 sec
big endian CRC32: sys 0.000000 sec
ok 2
After:
1..2
Using POWER8 crc32 implementation, CPU is little-endian
ok 1
Using POWER8 crc32 implementation, CPU is little-endian
normal CRC32: real 0.008097 sec
normal CRC32: user 0.008000 sec
normal CRC32: sys 0.000000 sec
big endian CRC32: real 0.147043 sec
big endian CRC32: user 0.144000 sec
big endian CRC32: sys 0.000000 sec
ok 2
Author CRC32 ASM code: Anton Blanchard <anton@au.ibm.com>
ref: https://github.com/antonblanchard/crc32-vpmsum
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
WL#6504 InnoDB buffer pool dump/load enchantments
This patch consists of two parts:
1. Dump only the hottest N% of the buffer pool(s)
2. Prevent hogging the server duing BP load
From MySQL - commit b409342c43ce2edb68807100a77001367c7e6b8e
Analysis: Current implementation will write and read at least one block
(sort_buffer_size bytes) from disk / index even if that block does not
contain any records.
Fix: Avoid writing / reading empty blocks to temporary files (disk).
Added new dynamic configuration variable innodb_buf_dump_status_frequency
to configure how often buffer pool dump status is printed in the logs.
A number between [0, 100] that tells how oftern buffer pool dump status
in percentages should be printed. E.g. 10 means that buffer pool dump
status is printed when every 10% of number of buffer pool pages are
dumped. Default is 0 (only start and end status is printed).
Analysis: Problem was that we did create crypt data for encrypted table but
this new crypt data was not written to page 0. Instead a default crypt data
was written to page 0 at table creation.
Fixed by explicitly writing new crypt data to page 0 after successfull
table creation.
