FTS add index fails
Problem:
========
InnoDB double frees the table if auxiliary fts table
creation fails and fails to set the dict operation
for the transaction. It leads to failure while
dropping newly added index.
Solution:
=========
InnoDB should avoid double freeing and set the
dictionary operation of transaction in
fts_create_common_tables()
InnoDB truncate table fails to load the fts stopword table into
cache. In that case, InnoDB double frees the truncate creation
transaction. InnoDB should free the transaction which was
created inside ha_innobase::create.
The is_local_ip function that used in Galera SST scripts now
incorrectly identifies ip-addresses falling under the "127.0.0.0/8"
netmask as non-local ip, although they certainly belong to the
loopback interface. This commit fixes this flaw.
report correct error codes in ed25519.
Invalid value stored in the user table or an OpenSSL error is CR_ERROR.
When a user provided incorrect password when logging in -
it's CR_AUTH_USER_CREDENTIALS.
In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.
This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.
ha_innobase::open(): If the table is only being opened by purge
for evaluating virtual column values, avoid invoking
initialize_auto_increment(), because the purge thread may already
be holding an shared latch on the clustered index root page.
Shared latches are not recursive. The additional request would lead
to a hang if another thread has started waiting for an exclusive latch.
Item_in_subselect::create_single_in_to_exists_cond() should handle the
case where the subquery is a table-less select but it is not a result
of a UNION.
(Table-less subqueries like "(SELECT 1)" are "substituted" with their select
list, but table-less subqueries with WHERE or HAVING clause, like
"(SELECT 1 WHERE ...)" are not substituted. They are handled with regular
execution path)
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
m_status == DA_OK_BULK' failed in Diagnostics_area::message from
get_schema_tables_record
Analysis: SET NAMES changes character set for character_set_client,
character_set_connection, character_set_results to 'filename'. The .frm file of view
has @xx sequences in the SELECT query, which give parsing error because 'filename'
character set is not parser friendly. When we get parsing error (ER_PARSE_ERROR), we
directly return true without setting error status. This is caught later in assertion.
Fix: Disallow 'filename' character set in SET NAMES because it is not parser
friendly.
before change test:
strace -fe trace=file -o /tmp/f.strace sql/mysqld --datadir=/tmp/d --log-bin=foo-bin --help --verbose && ls -la /tmp/
...
'mysqladmin variables' instead of 'mysqld --verbose --help'.
total 0
drwxrwxr-x. 2 dan dan 60 May 19 18:05 .
drwxrwxrwt. 27 root root 640 May 19 18:03 ..
-rw-rw----. 1 dan dan 0 May 19 18:05 foo-bin.index
In Item_field::fix_fields(): when the item was resolved to an Item_field
in the SELECT's select_list, copy the Item_field's "depended_from" field.
Failure to do so caused the item to have incorrect attributes: it pointed
to a Field in an upper select but used_tables() didn't return
OUTER_REF_TABLE_BIT.
The functions fil_file_readdir_next_file(), os_file_opendir(),
os_file_closedir() became dead code in the server in MariaDB 10.4.0
with commit 09af00cbde (the removal of
the crash recovery logic for the TRUNCATE TABLE implementation that
was replaced in MDEV-13564).
os_file_opendir(), os_file_closedir(): Define as macros.
trx_t::will_lock: Changed the type to bool.
trx_t::is_autocommit_non_locking(): Replaces
trx_is_autocommit_non_locking().
trx_is_ac_nl_ro(): Remove (replaced with equivalent assertion expressions).
assert_trx_nonlocking_or_in_list(): Remove.
Replaced with at least as strict checks in each place.
check_trx_state(): Moved to a static function; partially replaced with
individual debug assertions implementing equivalent or stricter checks.
ha_innobase::index_read(): If an autocommit non-locking transaction was
already started, refuse to access a SPATIAL INDEX.
Once a non-locking autocommit transaction has started, it must remain
in that mode (not acquire any locks).
This should fix one cause of the assertion failure that would occur in
DeadlockChecker::check_and_resolve() under heavy load, presumably
due to concurrent execution of trx_commit_in_memory().
Problem:
=======
The ALWAYS option of the mariadb-binlog --base64-output flag
formats its output incorrectly. This option is deprecated, and
MySQL 8.0 has removed it entirely.
Solution:
========
Adhere to MySQL and remove this option from MariaDB.
Behavioral Changes:
==================
Use Case: ./mariadb-binlog --base64-output
Previous Behavior: Sets base64-output mode to always
New Behavior: Error message indicating incomplete argument
Use Case: ./mariadb-binlog --base64-output=always
Previous Behavior: Sets base64-output mode to always
New Behavior: Error message indicating invalid argument value
Reviewed By:
==========
Andrei Elkin: <andrei.elkin@mariadb.com>
Fixed bugs caused by inaccuracies in automatic merging
from other branches:
1) Authentication information is not removed from the connection
address, which causes some tests to fail;
2) wsrep_debug=on should be replaced with wsrep_debug=1;
3) Added missing "connection" lines to test result file;
4) Some tests have been corrected for Galera 4.x (10.4+).
1) This commit implements reading all sections from configuration
files while looking for the current value of any server variable,
which were previously only read from the [mysqld.suffix] group and
from [mysqld], but not from other groups such as [mariadb.suffix],
[mariadb] or, for example, [server].
2) This commit also fixes misrecognition of some parameters when
parsing a command line containing a special marker for the end
of the list of options ("--") or when short option names (such
as "-s", "-a" and "-h arg") chained together (like a "-sah arg").
Such parameters can be passed to the SST script in the list of
arguments after "--mysqld-args" if the server is started with a
complex set of options - this was revealed during manual testing
of changes to read configuration files.
3) The server-side preparation code for the "--mysqld-args"
option list has also been simplified to make it easier to change
in the future (if needed), and has been improved to properly
handle the special backquote ("`") character in the argument
values.
This commit contains a large set of further bug fixes and
improvements to SST scripts for Galera, continuing the work
that was started in MDEV-24962 to make SST scripts work smoothly
in different network configurations (especially using ipv6) and
with different environment settings:
1) The ipv6 addresses were incorrectly handled in the SST script
for rsync (incorrect address substitution for establishing a
connection, incorrect address substitution for bind, and so on);
2) Checking the locality of the ip-address in SST scripts did not
support ipv6 addresses (such as "[::1]"), which were falsely
identified as non-local ip, which further did not allow running
two SSTs on different local addresses on the same machine.
On the other hand, this bug masked some other errors (related
to handling ipv6 addresses);
3) The code for checking the locality of the ip address was different
in the SST scripts for rsync and for mysqldump, with individual
flaws. This code is now made common and moved to wsrep_sst_common;
4) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) in the wait_for_listen() and check_pid_and_port() functions
did not process ipv6 addresses correctly in all cases (not for all
branches);
5) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) in the wait_for_listen() and check_pid_and_port() functions
for some code branches could give a false positive result due to
the textual match of prefixes in the port number and/or PID of
the process;
6) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) was supported through different utilities in SST scripts
for mariabackup and for rsync, and with various minor flaws in
the code. Now the code is still different in these scripts, but
it supports a common set of utilities (lsof, ss, sockstat) and
is synchronized across patterns that used to check the output
of these utilities;
7) In SST via mariabackup, the signal about readiness to receive data
is sometimes sent too early - immediately after listen(), and not
after accept() (which are called by socat or netcat utility).
8) Checking availability of the some options of some utilities was
done using the grep pattern, which easily gives false positives;
9) Common name (CN) for local addresses, if not explicitly specified,
is now always replaced to "localhost" to avoid the need to generate
many separate certificates for local addresses of one machine and
not to depend on which the local address is currently used in test
(ipv4 or ipv6, etc.);
10) In tests galera_sst_mariabackup_encrypt_with_key_server and
galera_sst_rsync_encrypt_with_key_server the correct certificate
is selected to avoid commonname (CN) mismatch problems;
11) Further refactoring to protect against spaces in file names.
12) Further general refactoring to eliminate bash-specific constructs
or to improve code readability;
13) The code for setting options for the nc (netcat) utility was
different in different scripts for SST - now it is made identical.
14) Fixed long-time broken encryption via xbcrypt in combination with
mariabackup and added support for key-based encryption via openssl
utility, which is now enabled by default for encrypt=1 mode (this
default mode can be changed using a new configuration file option
"encypt-format=openssl|xbcrypt", which can be placed in the [mysqld],
[sst] or in the [xtrabackup] section) - this change will allow us
to use and to test the encypt=1 encryption without installing
non-standard third-party utilities.
Fixed bugs caused by inaccuracies in automatic merging
from other branches:
1) Authentication information is not removed from the connection
address, which causes some tests to fail;
2) wsrep_debug=on should be replaced with wsrep_debug=1;
3) Added missing "connection" lines to test result file;
4) Some tests have been corrected for Galera 4.x (10.4+).
1) This commit implements reading all sections from configuration
files while looking for the current value of any server variable,
which were previously only read from the [mysqld.suffix] group and
from [mysqld], but not from other groups such as [mariadb.suffix],
[mariadb] or, for example, [server].
2) This commit also fixes misrecognition of some parameters when
parsing a command line containing a special marker for the end
of the list of options ("--") or when short option names (such
as "-s", "-a" and "-h arg") chained together (like a "-sah arg").
Such parameters can be passed to the SST script in the list of
arguments after "--mysqld-args" if the server is started with a
complex set of options - this was revealed during manual testing
of changes to read configuration files.
3) The server-side preparation code for the "--mysqld-args"
option list has also been simplified to make it easier to change
in the future (if needed), and has been improved to properly
handle the special backquote ("`") character in the argument
values.
1) This commit implements reading all sections from configuration
files while looking for the current value of any server variable,
which were previously only read from the [mysqld.suffix] group and
from [mysqld], but not from other groups such as [mariadb.suffix],
[mariadb] or, for example, [server].
2) This commit also fixes misrecognition of some parameters when
parsing a command line containing a special marker for the end
of the list of options ("--") or when short option names (such
as "-s", "-a" and "-h arg") chained together (like a "-sah arg").
Such parameters can be passed to the SST script in the list of
arguments after "--mysqld-args" if the server is started with a
complex set of options - this was revealed during manual testing
of changes to read configuration files.
3) The server-side preparation code for the "--mysqld-args"
option list has also been simplified to make it easier to change
in the future (if needed), and has been improved to properly
handle the special backquote ("`") character in the argument
values.
This commit contains a large set of further bug fixes and
improvements to SST scripts for Galera, continuing the work
that was started in MDEV-24962 to make SST scripts work smoothly
in different network configurations (especially using ipv6) and
with different environment settings:
1) The ipv6 addresses were incorrectly handled in the SST script
for rsync (incorrect address substitution for establishing a
connection, incorrect address substitution for bind, and so on);
2) Checking the locality of the ip-address in SST scripts did not
support ipv6 addresses (such as "[::1]"), which were falsely
identified as non-local ip, which further did not allow running
two SSTs on different local addresses on the same machine.
On the other hand, this bug masked some other errors (related
to handling ipv6 addresses);
3) The code for checking the locality of the ip address was different
in the SST scripts for rsync and for mysqldump, with individual
flaws. This code is now made common and moved to wsrep_sst_common;
4) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) in the wait_for_listen() and check_pid_and_port() functions
did not process ipv6 addresses correctly in all cases (not for all
branches);
5) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) in the wait_for_listen() and check_pid_and_port() functions
for some code branches could give a false positive result due to
the textual match of prefixes in the port number and/or PID of
the process;
6) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) was supported through different utilities in SST scripts
for mariabackup and for rsync, and with various minor flaws in
the code. Now the code is still different in these scripts, but
it supports a common set of utilities (lsof, ss, sockstat) and
is synchronized across patterns that used to check the output
of these utilities;
7) In SST via mariabackup, the signal about readiness to receive data
is sometimes sent too early - immediately after listen(), and not
after accept() (which are called by socat or netcat utility).
8) Checking availability of the some options of some utilities was
done using the grep pattern, which easily gives false positives;
9) Common name (CN) for local addresses, if not explicitly specified,
is now always replaced to "localhost" to avoid the need to generate
many separate certificates for local addresses of one machine and
not to depend on which the local address is currently used in test
(ipv4 or ipv6, etc.);
10) In tests galera_sst_mariabackup_encrypt_with_key_server and
galera_sst_rsync_encrypt_with_key_server the correct certificate
is selected to avoid commonname (CN) mismatch problems;
11) Further refactoring to protect against spaces in file names.
12) Further general refactoring to eliminate bash-specific constructs
or to improve code readability;
13) The code for setting options for the nc (netcat) utility was
different in different scripts for SST - now it is made identical.
14) Fixed long-time broken encryption via xbcrypt in combination with
mariabackup and added support for key-based encryption via openssl
utility, which is now enabled by default for encrypt=1 mode (this
default mode can be changed using a new configuration file option
"encypt-format=openssl|xbcrypt", which can be placed in the [mysqld],
[sst] or in the [xtrabackup] section) - this change will allow us
to use and to test the encypt=1 encryption without installing
non-standard third-party utilities.
