SELECT and ALTER TABLE ... REBUILD PARTITION".
ALTER TABLE on InnoDB table (including partitioned tables)
acquired exclusive locks on rows of table being altered.
In cases when there was concurrent transaction which did
locking reads from this table this sometimes led to a
deadlock which was not detected by MDL subsystem nor by
InnoDB engine (and was reported only after exceeding
innodb_lock_wait_timeout).
This problem stemmed from the fact that ALTER TABLE acquired
TL_WRITE_ALLOW_READ lock on table being altered. This lock
was interpreted as a write lock and thus for table being
altered handler::external_lock() method was called with
F_WRLCK as an argument. As result InnoDB engine treated
ALTER TABLE as an operation which is going to change data
and acquired LOCK_X locks on rows being read from old
version of table.
In case when there was a transaction which already acquired
SR metadata lock on table and some LOCK_S locks on its rows
(e.g. by using it in subquery of DML statement) concurrent
ALTER TABLE was blocked at the moment when it tried to
acquire LOCK_X lock before reading one of these rows.
The transaction's attempt to acquire SW metadata lock on
table being altered led to deadlock, since it had to wait
for ALTER TABLE to release SNW lock. This deadlock was not
detected and got resolved only after timeout expiring
because waiting were happening in two different subsystems.
Similar deadlocks could have occured in other situations.
This patch tries to solve the problem by changing ALTER TABLE
implementation to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ. After this step handler::external_lock()
is called with F_RDLCK as an argument and InnoDB engine
correctly interprets ALTER TABLE as operation which only
reads data from original version of table. Thanks to this
ALTER TABLE acquires only LOCK_S locks on rows it reads.
This, in its turn, causes inter-subsystem deadlocks to go
away, as all potential lock conflicts and thus deadlocks will
be limited to metadata locking subsystem:
- When ALTER TABLE reads rows from table being altered it
can't encounter any locks which conflict with LOCK_S row
locks. There should be no concurrent transactions holding
LOCK_X row locks. Such a transaction should have been
acquired SW metadata lock on table first which would have
conflicted with ALTER's SNW lock.
- Vice versa, when DML which runs concurrently with ALTER
TABLE tries to lock row it should be requesting only LOCK_S
lock which is compatible with locks acquired by ALTER,
as otherwise such DML must own an SW metadata lock on table
which would be incompatible with ALTER's SNW lock.
mysql-test/r/innodb_mysql_lock2.result:
Added test for bug #51263 "Deadlock between transactional
SELECT and ALTER TABLE ... REBUILD PARTITION".
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Since CREATE TRIGGER no longer acquires write lock on table
it is no longer interpreted as an operation which modifies
table data and therefore no longer fails if invoked for
SBR-only engine in ROW mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
Since CREATE TRIGGER no longer acquires write lock on table
it is no longer interpreted as an operation which modifies
table data and therefore no longer fails if invoked for
SBR-only engine in ROW mode.
mysql-test/t/innodb_mysql_lock2.test:
Added test for bug #51263 "Deadlock between transactional
SELECT and ALTER TABLE ... REBUILD PARTITION".
sql/ha_partition.cc:
When ALTER TABLE creates a new partition to be filled from
other partition lock it in F_WRLCK mode instead of using
mode which was used for locking the whole table (it is
F_RDLCK now).
sql/lock.cc:
Replaced conditions which used TL_WRITE_ALLOW_READ
lock type with equivalent conditions using
TL_WRITE_ALLOW_WRITE. This should allow to get rid
of TL_WRITE_ALLOW_READ lock type eventually.
sql/mdl.cc:
Updated outdated comment to reflect current situation.
sql/sql_base.cc:
Replaced conditions which used TL_WRITE_ALLOW_READ
lock type with equivalent conditions using
TL_WRITE_ALLOW_WRITE. This should allow to get rid
of TL_WRITE_ALLOW_READ lock type eventually.
sql/sql_table.cc:
mysql_admin_table():
Use TL_WRITE_ALLOW_WRITE lock type instead of
TL_WRITE_ALLOW_READ to determine that we need to acquire
upgradable metadata lock. This should allow to completely
get rid of TL_WRITE_ALLOW_READ in long term.
mysql_recreate_table():
ALTER TABLE now requires TL_READ_NO_INSERT thr_lock.c lock
instead of TL_WRITE_ALLOW_READ.
sql/sql_trigger.cc:
Changed CREATE/DROP TRIGGER implementation to use
TL_READ_NO_INSERT lock instead of TL_WRITE_ALLOW_READ lock.
The latter is no longer necessary since:
a) We now can rely on metadata locks to achieve proper
isolation between two DDL statements or DDL and DML
statements.
b) This statement does not change any data in table so there
is no need to inform storage engine about it.
sql/sql_yacc.yy:
Changed implementation of ALTER TABLE (and CREATE/DROP INDEX
as a consequence) to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ lock. This is possible since:
a) We now can rely on metadata locks to achieve proper
isolation between two DDL statements or DDL and DML
statements.
b) This statement only reads data in table being open.
We write data only to the new version of table and
then replace with it old version of table under
X metadata lock.
Thanks to this change InnoDB will no longer acquire LOCK_X
locks on rows being read by ALTER TABLE (instead LOCK_S
locks will be acquired) and thus cause of bug #51263
"Deadlock between transactional SELECT and ALTER TABLE ...
REBUILD PARTITION" is removed.
Did the similar change for CREATE TRIGGER (see comments
for sql_trigger.cc for details).
can now view the content of InnoDB System Tables through following
information schema tables:
information_schema.INNODB_SYS_TABLES
information_schema.INNODB_SYS_INDEXES
information_schema.INNODB_SYS_COUMNS
information_schema.INNODB_SYS_FIELDS
information_schema.INNODB_SYS_FOREIGN
information_schema.INNODB_SYS_FOREIGN_COLS
information_schema.INNODB_SYS_TABLESTATS
rb://330 Approved by Marko
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
libmysqld/CMakeLists.txt:
Add new files to the build list.
libmysqld/Makefile.am:
Add new files to the build list.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Add test case for Bug#42643
mysql-test/include/mix1.inc:
Update test case as TRUNCATE TABLE now grabs a exclusive lock.
Ensure that TRUNCATE waits for granted locks on the table.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
As with other data modifying statements, TRUNCATE is still not
possible in a transaction with isolation level READ COMMITTED
or READ UNCOMMITED. It would be possible to implement so, but
it is not worth the effort.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Test under different binlog formats.
mysql-test/suite/binlog/t/disabled.def:
Re-enable test case.
mysql-test/t/innodb_bug38231.test:
Truncate no longer works with row-level locks.
mysql-test/t/mdl_sync.test:
Ensure that a acquired lock is not given up due to a conflict.
mysql-test/t/partition_innodb_semi_consistent.test:
End transaction as to release metadata locks.
mysql-test/t/truncate.test:
A metadata lock is now taken before the object is verified.
sql/CMakeLists.txt:
Add new files to the build list.
sql/Makefile.am:
Add new files to the build list.
sql/datadict.cc:
Introduce a new file specific for data dictionary operations.
sql/datadict.h:
Add header file.
sql/sql_base.cc:
Rename data dictionary function.
sql/sql_bitmap.h:
Include dependency.
sql/sql_delete.cc:
Move away from relying on mysql_delete() to delete all rows of
a table. Thus, move any bits related to truncate to sql_truncate.cc
sql/sql_delete.h:
Remove parameter.
sql/sql_parse.cc:
Add protection against the global read lock -- a intention
exclusive lock can be acquired in the truncate path.
sql/sql_show.cc:
Add sync point for testing scenarios where a pending flush
is ignored.
sql/sql_truncate.cc:
Acquire a shared metadata lock before accessing table metadata.
Upgrade the lock to a exclusive one if the table can be re-created.
Rework binlog rules to better reflect the requirements.
sql/sql_yacc.yy:
Set appropriate lock types for table to be truncated.
sql/table.h:
Move to data dictionary header.
------------------------------------------------------------
revno: 3116
revision-id: vasil.dimov@oracle.com-20100524182209-sk114oipf1vhjbv5
parent: vasil.dimov@oracle.com-20100524175802-twmwb29vvaehe6b8
committer: Vasil Dimov <vasil.dimov@oracle.com>
branch nick: mysql-trunk-innodb
timestamp: Mon 2010-05-24 21:22:09 +0300
message:
Disable the tests on embedded windows that fail due to
Bug #53947 InnoDB: Assertion failure in thread 4224 in file
.\sync\sync0sync.c line 324
This changeset should be reverted once the bug is fixed.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
------------------------------------------------------------
revno: 3094
revision-id: vasil.dimov@oracle.com-20100513074652-0cvlhgkesgbb2bfh
parent: vasil.dimov@oracle.com-20100512173700-byf8xntxjur1hqov
committer: Vasil Dimov <vasil.dimov@oracle.com>
branch nick: mysql-trunk-innodb
timestamp: Thu 2010-05-13 10:46:52 +0300
message:
Followup to Bug#51920, fix binlog.binlog_killed
This is a followup to the fix of
Bug#51920 Innodb connections in row lock wait ignore KILL until lock wait
timeout
in that fix (rb://279) the behavior was changed to honor when a trx is
interrupted during lock wait, but the returned error code was still
"lock wait timeout" when it should be "interrupted".
This change fixes the non-deterministically failing test binlog.binlog_killed,
that failed like this:
binlog.binlog_killed 'stmt' [ fail ]
Test ended at 2010-05-12 11:39:08
CURRENT_TEST: binlog.binlog_killed
mysqltest: At line 208: query 'reap' failed with wrong errno 1205: 'Lock wait timeout exceeded; try restarting transaction', instead of 0...
Approved by: Sunny Bains (rb://344)
------------------------------------------------------------
This merge is non-trivial since it has to introduce the DB_INTERRUPTED
error code.
Also revert vasil.dimov@oracle.com-20100408165555-9rpjh24o0sa9ad5y
which adjusted the binlog.binlog_killed test to the new (wrong) behavior
This patch fixes two problems described as follows:
1 - If there is an on-going transaction and a temporary table is created or
dropped, any failed statement that follows the "create" or "drop commands"
triggers a rollback and by consequence the slave will go out sync because
the binary log will have a wrong sequence of events.
To fix the problem, we changed the expression that evaluates when the
cache should be flushed after either the rollback of a statment or
transaction.
2 - When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options. For that reason, if
the transaction had updated only transactional engines and was rolled
back at the end (.e.g due to a deadlock) the changes were not written
to the binary log, including the creation of the temporary table.
To fix the problem, we have set the OPTION_KEEP_LOG into the thd->options
when a "CREATE TEMPORARY TABLE SELECT * FROM" is executed.
sql/log.cc:
Reorganized the code based on the following functions:
- bool ending_trans(const THD* thd, const bool all);
- bool trans_has_updated_non_trans_table(const THD* thd);
- bool trans_has_no_stmt_committed(const THD* thd, const bool all);
- bool stmt_has_updated_non_trans_table(const THD* thd);
sql/log.h:
Added functions to organize the code in log.cc.
sql/log_event.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/log_event_old.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/sql_parse.cc:
When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options.
To fix the problem, we have set the OPTION_KEEP_LOG into the
thd->options when a "CREATE TEMPORARY TABLE SELECT * FROM"
is executed.
Post-fix: Updated a test case after the patch for BUG#50410,
because the patch makes ndb to run in the row format and as
such unsafe warning messages are not printed out.
Post-merge fixes: Remove the MYSQL_VERSION_ID checks, because they only
apply to the InnoDB Plugin. Fix potential race condition accessing
trx->op_info and trx->detailed_error.
------------------------------------------------------------
revno: 3466
revision-id: marko.makela@oracle.com-20100514130815-ym7j7cfu88ro6km4
parent: marko.makela@oracle.com-20100514130228-n3n42nw7ht78k0wn
committer: Marko Mäkelä <marko.makela@oracle.com>
branch nick: mysql-5.1-innodb2
timestamp: Fri 2010-05-14 16:08:15 +0300
message:
Make the InnoDB FOREIGN KEY parser understand multi-statements. (Bug #48024)
Also make InnoDB thinks that /*/ only starts a comment. (Bug #53644).
This fixes the bugs in the InnoDB Plugin.
ha_innodb.h: Use trx_query_string() instead of trx_query() when
available (MySQL 5.1.42 or later).
innobase_get_stmt(): New function, to retrieve the currently running
SQL statement.
struct trx_struct: Remove mysql_query_str. Use innobase_get_stmt() instead.
dict_strip_comments(): Add and observe the parameter sql_length. Treat
/*/ as the start of a comment.
dict_create_foreign_constraints(), row_table_add_foreign_constraints():
Add the parameter sql_length.
Also make InnoDB thinks that /*/ only starts a comment. (Bug #53644).
This fixes the bugs in the InnoDB Plugin.
ha_innodb.h: Use trx_query_string() instead of trx_query() when
available (MySQL 5.1.42 or later).
innobase_get_stmt(): New function, to retrieve the currently running
SQL statement.
struct trx_struct: Remove mysql_query_str. Use innobase_get_stmt() instead.
dict_strip_comments(): Add and observe the parameter sql_length. Treat
/*/ as the start of a comment.
dict_create_foreign_constraints(), row_table_add_foreign_constraints():
Add the parameter sql_length.
Also make InnoDB thinks that /*/ only starts a comment. (Bug #53644).
struct trx_struct: Add mysql_query_len.
ha_innodb.cc: Use trx_query_string() instead of trx_query() and
initialize trx->mysql_query_len.
INNOBASE_COPY_STMT(thd, trx): New macro, to initialize
trx->mysql_query_str and trx->mysql_query_len.
dict_strip_comments(): Add and observe the parameter sql_length. Treat
/*/ as the start of a comment.
dict_create_foreign_constraints(), row_table_add_foreign_constraints():
Add the parameter sql_length.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
sql/protocol.cc:
Fix a typo.
sql/sql_class.h:
- Introduce THD::get_row_count_func() / THD::set_row_count_func();
- Remove the CF_HAS_ROW_COUNT define
sql/sql_parse.cc:
CF_HAS_ROW_COUNT was eliminated.
MTR sporadically reported that rpl_do_grant does not
clean up after itself.
We fix this by backporting BUG 50984 fix. This deploys
missing synchronization between master and slave.
Additionally, it also fixes the check_testcase for
rpl_tmp_table_and_DDL.
Problem: The rpl_ndb did not set binlog_format explicitly. Since
the default is binlog_format=statement, it means that the suite
ran with that. ndb does not support binlog_format=statement,
and many tests were skipped because they sourced
include/have_binlog_format_row_or_mixed.inc
Fix: set binlog_format=row explicitly in the configuration file
for the rpl_ndb suite.
Makefile.am:
Removed duplicate run of rpl_ndb suite with binlog_format=row.
Now that rpl_ndb is run with binlog_format=row by default, this
run that explicitly changes to binlog_format=row is not needed,
because it is covered by the following run.
mysql-test/suite/rpl_ndb/my.cnf:
cluster only supports binlog_format=row.
mysql-test/suite/rpl_ndb/r/rpl_ndb_stm_innodb.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_stm_innodb.test:
This test is supposed to use binlog_format=STATEMENT on
master. It uses innodb on master, so statement format is
supported.
Support returning 512 and 511 pages for the buffer pool size, this
is undeterministic and probably depends on alignment issues.
The default buffer pool size is 8M (512) pages, which is set in
include/default_mysqld.cnf. So the previous "replace_result 8192 8191"
had no effect.
------------------------------------------------------------
revno: 3459
revision-id: marko.makela@oracle.com-20100511165845-lsw7seixftgzpfqt
parent: vasil.dimov@oracle.com-20100511110029-18xvuu6r7har8toh
committer: Marko Mäkelä <marko.makela@oracle.com>
branch nick: mysql-5.1-innodb2
timestamp: Tue 2010-05-11 19:58:45 +0300
message:
Fix sys_vars.tx_isolation_func.test, which was broken in revno 3432
when making READ UNCOMMITTED lock as little as READ COMMITTED.
------------------------------------------------------------
revno: 3459
revision-id: marko.makela@oracle.com-20100511105308-grp2t3prh3tqivw0
parent: marko.makela@oracle.com-20100511105012-b2t7wvz6mu6bll74
parent: marko.makela@oracle.com-20100505123901-xjxu93h1xnbkfkq0
committer: Marko Mäkelä <marko.makela@oracle.com>
branch nick: mysql-5.1-innodb
timestamp: Tue 2010-05-11 13:53:08 +0300
message:
Merge a patch from Facebook to fix Bug #53290
commit e759bc64eb5c5eed4f75677ad67246797d486460
Author: Ryan Mack
Date: 3 days ago
Bugfix for 53290, fast unique index creation fails on duplicate null values
Summary:
Bug in the fast index creation code incorrectly considers null
values to be duplicates during block merging. Innodb policy is that
multiple null values are allowed in a unique index. Null duplicates
were correctly ignored while sorting individual blocks and with slow
index creation.
Test Plan:
mtr, including new test, load dbs using deferred index creation
License:
Copyright (C) 2009-2010 Facebook, Inc. All Rights Reserved.
Dual licensed under BSD license and GPLv2.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY FACEBOOK, INC. ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL FACEBOOK, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place, Suite 330, Boston, MA 02111-1307 USA
------------------------------------------------------------
revno: 3453.2.1
revision-id: marko.makela@oracle.com-20100505123901-xjxu93h1xnbkfkq0
parent: marko.makela@oracle.com-20100505120555-ukoq1gklpheslrxs
committer: Marko Mäkelä <marko.makela@oracle.com>
branch nick: 5.1-innodb
timestamp: Wed 2010-05-05 15:39:01 +0300
message:
Merge a contribution from Ryan Mack at Facebook:
Bugfix for 53290, fast unique index creation fails on duplicate null values
Summary:
Bug in the fast index creation code incorrectly considers null
values to be duplicates during block merging. Innodb policy is that
multiple null values are allowed in a unique index. Null duplicates
were correctly ignored while sorting individual blocks and with slow
index creation.
Test Plan:
mtr, including new test, load dbs using deferred index creation
DiffCamp Revision: 110840
Reviewed By: mcallaghan
CC: mcallaghan, mysql-devel@lists
Revert Plan:
OK
commit e759bc64eb5c5eed4f75677ad67246797d486460
Author: Ryan Mack
Date: 3 days ago
Bugfix for 53290, fast unique index creation fails on duplicate null values
Summary:
Bug in the fast index creation code incorrectly considers null
values to be duplicates during block merging. Innodb policy is that
multiple null values are allowed in a unique index. Null duplicates
were correctly ignored while sorting individual blocks and with slow
index creation.
Test Plan:
mtr, including new test, load dbs using deferred index creation
License:
Copyright (C) 2009-2010 Facebook, Inc. All Rights Reserved.
Dual licensed under BSD license and GPLv2.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY FACEBOOK, INC. ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL FACEBOOK, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place, Suite 330, Boston, MA 02111-1307 USA
