BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
This bug is a consequence of WL#5349, as the
default storage engine was changed.
The fix was to explicitly add an ENGINE
clause to a CREATE TABLE statement, to
ensure that we test case preservement on
MyISAM.
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
The server crashed on an attempt to optimize a MERGE table with
non-existent child table.
mysql_admin_table() relied on the table to be successfully open
if a table object had been allocated.
Changed code to check return value of the open function before
calling a handler:: function on it.
mysql-test/r/merge.result:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
Updated result file.
mysql-test/t/merge.test:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
Changed tests to respect changed TEMPORARY MERGE locking (unrelated).
Changed tests to respect changed CREATE TABLE ... LIKE (unrelated).
Changed tests to respect that no new tables can be created
under LOCK TABLE (unrelated).
Added test for Bug#47633.
Changed error numbers to symbolic names.
Added test for child locking for ALTER under LOCK TABLE.
Since Bug 36171 is not pushed yet, not the whole patch has been backported.
mysys/my_delete.c:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
Fixed error reporting.
Fixed indentation.
mysys/my_mmap.c:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
Added DBUG.
sql/item_func.cc:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Added Debug Sync point, required by merge_sync.test.
sql/sql_table.cc:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
Do not call handler:: functions if the table was not opened
successfully.
Added Debug Sync point, required by merge_sync.test.
storage/myisam/mi_check.c:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
Unmap memory before exchanging data files. Needed on Windows.
storage/myisammrg/ha_myisammrg.cc:
Backport of revid:ingo.struewing@sun.com-20091223200354-r2uzbdkj2v6yv111
Added Debug Sync point, required by merge_sync.test.
merge_sync.test will be introduced by a patch for Bug 36171,
which is not pushed yet.
DML flow and SAVEPOINT
The problem was that replication could break if a transaction involving
both transactional and non-transactional tables was rolled back to a
savepoint. It broke if a concurrent connection tried to drop a
transactional table which was locked after the savepoint was set.
This DROP TABLE completed when ROLLBACK TO SAVEPOINT was executed as the
lock on the table was dropped by the transaction. When the slave later
tried to apply the binlog, it would fail as the table would already
have been dropped.
The reason for the problem is that transactions involving both
transactional and non-transactional tables are written fully to the
binlog during ROLLBACK TO SAVEPOINT. At the same time, metadata locks
acquired after a savepoint, were released during ROLLBACK TO SAVEPOINT.
This allowed a second connection to drop a table only used between
SAVEPOINT and ROLLBACK TO SAVEPOINT. Which caused the transaction binlog
to refer to a non-existing table when it was written during ROLLBACK
TO SAVEPOINT.
This patch fixes the problem by not releasing metadata locks when
ROLLBACK TO SAVEPOINT is executed if binlogging is enabled.
Don't call member functions for a NIL pointer.
mysql-test/r/subselect4.result:
Add test case.
mysql-test/t/subselect4.test:
Add test case.
sql/sql_select.cc:
If the (virtual) member function clone_item() returns NULL,
there is no substitution to be made, and we don't need to set the collation.
The test was invoking Item_cache::clone_item()
use limit efficiently
Bug #36569: UPDATE ... WHERE ... ORDER BY... always does a
filesort even if not required
Also two bugs reported after QA review (before the commit
of bugs above to public trees, no documentation needed):
Bug #53737: Performance regressions after applying patch
for bug 36569
Bug #53742: UPDATEs have no effect after applying patch
for bug 36569
Execution of single-table UPDATE and DELETE statements did not use the
same optimizer as was used in the compilation of SELECT statements.
Instead, it had an optimizer of its own that did not take into account
that you can omit sorting by retrieving rows using an index.
Extra optimization has been added: when applicable, single-table
UPDATE/DELETE statements use an existing index instead of filesort. A
corresponding SELECT query would do the former.
Also handling of the DESC ordering expression has been added when
reverse index scan is applicable.
From now on most single table UPDATE and DELETE statements show the
same disk access patterns as the corresponding SELECT query. We verify
this by comparing the result of SHOW STATUS LIKE 'Sort%
Currently the get_index_for_order function
a) checks quick select index (if any) for compatibility with the
ORDER expression list or
b) chooses the cheapest available compatible index, but only if
the index scan is cheaper than filesort.
Second way is implemented by the new test_if_cheaper_ordering
function (extracted part the test_if_skip_sort_order()).
mysql-test/r/log_state.result:
Updated result for optimized query, bug #36569.
mysql-test/r/single_delete_update.result:
Test case for bug #30584, bug #36569 and bug #53742.
mysql-test/r/update.result:
Updated result for optimized query, bug #30584.
Note:
"Handler_read_last 1" omitted, see bug 52312:
lost Handler_read_last status variable.
mysql-test/t/single_delete_update.test:
Test case for bug #30584, bug #36569 and bug #53742.
sql/opt_range.cc:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
* get_index_for_order() has been rewritten entirely and moved
to sql_select.cc
New QUICK_RANGE_SELECT::make_reverse method has been added.
sql/opt_range.h:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
* get_index_for_order() has been rewritten entirely and moved
to sql_select.cc
New functions:
* QUICK_SELECT_I::make_reverse()
* SQL_SELECT::set_quick()
sql/records.cc:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
* init_read_record_idx() has been modified to allow reverse index scan
New functions:
* rr_index_last()
* rr_index_desc()
sql/records.h:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
init_read_record_idx() has been modified to allow reverse index scan
sql/sql_delete.cc:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
mysql_delete: an optimization has been added to skip
unnecessary sorting with ORDER BY clause where select
result ordering is acceptable.
sql/sql_select.cc:
Bug #30584, bug #36569, bug #53737, bug #53742:
UPDATE/DELETE ... WHERE ... ORDER BY... always does a filesort
even if not required
The const_expression_in_where function has been modified
to accept both Item and Field pointers.
New functions:
* get_index_for_order()
* test_if_cheaper_ordering() has been extracted from
test_if_skip_sort_order() to share with get_index_for_order()
* simple_remove_const()
sql/sql_select.h:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
New functions:
* test_if_cheaper_ordering()
* simple_remove_const()
* get_index_for_order()
sql/sql_update.cc:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
mysql_update: an optimization has been added to skip
unnecessary sorting with ORDER BY clause where a select
result ordering is acceptable.
sql/table.cc:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
New functions:
* TABLE::update_const_key_parts()
* is_simple_order()
sql/table.h:
Bug #30584, bug #36569: UPDATE/DELETE ... WHERE ... ORDER BY...
always does a filesort even if not required
New functions:
* TABLE::update_const_key_parts()
* is_simple_order()
mysql-test/suite/perfschema/t/no_threads-master.opt:
Innodb will start multiple threads, which is
not compatible with --one-thread. Disable
innodb to be able to run the test case.
The default storage engine is changed from MyISAM to
InnoDB, in all builds except for the embedded server.
In addition, the following system variables are
changed:
* innodb_file_per_table is enabled
* innodb_strict_mode is enabled
* innodb_file_format_name_update is changed
to 'Barracuda'
The test suite is changed so that tests that do not
explicitly include the have_innodb.inc are run with
--default-storage-engine=MyISAM. This is to ease the
transition, so that most regression tests are run
with the same engine as before.
Some tests are disabled for the embedded server
regression test, as the output of certain statements
will be different that for the regular server
(i.e SELECT @@default_storage_engine). This is to
ease transition.
mysql-test/mysql-test-run.pl:
The regression test suite now adds a
--default-storage-engine=MyISAM for all non-innodb
tests. This behaviour can be controlled by the
default-myisam switch in mysql-test-run
mysql-test/t/bootstrap-master.opt:
The bootstrap test can only be run without InnoDB
as it starts several mysqld instances on the same
datadir. This is possible with MyISAM, but not
with InnoDB.
storage/innobase/CMakeLists.txt:
Build InnoDB per default
storage/innobase/handler/ha_innodb.cc:
Change default values for system variables
Enable file_per_table
Enable strict_mode
Upgrade default file format to Barracuda
and innodb_file_format_max two system variables. And this also fixes
bug #53654 after 2nd shutdown innodb_file_format_check attains strange
values.
rb://366 approved by Marko
On [Open]Solaris/x86 the FPU was not switched to 64-bit double
precision mode when the server binary was built with Sun
Studio. That caused GIS test failures due to differences in
expected and actual results.
Let mtr lookup the plugins, rather than hard-coding autotools lib path.
mysql-test/include/not_parallel.inc:
Add new feature for skipping when running in parallel.
mysql-test/mysql-test-run.pl:
Use find_plugin to locate plugins.
Export opt_parallel in environment.
mysql-test/suite/federated/federated_plugin-master.opt:
Use plugin dir from mtr.
mysql-test/suite/federated/federated_plugin.test:
Skip test, disabled.
mysql-test/t/archive_plugin-master.opt:
Use plugin dir from mtr.
mysql-test/t/archive_plugin.test:
Skip test if running in parallel.
mysql-test/t/blackhole_plugin-master.opt:
Use plugin dir from mtr.
mysql-test/t/blackhole_plugin.test:
Skip test if running in parallel.
------------------------------------------------------------
revno: 3506
revision-id: sergey.glukhov@sun.com-20100609121718-04mpk5kjxvnrxdu8
parent: sergey.glukhov@sun.com-20100609120734-ndy2281wau9067zv
committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
branch nick: mysql-5.1-innodb
timestamp: Wed 2010-06-09 16:17:18 +0400
message:
Bug#38999 valgrind warnings for update statement in function compare_record()
(InnoDB plugin branch)
@ mysql-test/suite/innodb_plugin/r/innodb_mysql.result
test case
@ mysql-test/suite/innodb_plugin/t/innodb_mysql.test
test case
@ storage/innodb_plugin/row/row0sel.c
init null bytes with default values as they might be
left uninitialized in some cases and these uninited bytes
might be copied into mysql record buffer that leads to
valgrind warnings on next use of the buffer.
sporadically".
Races in truncate_coverage.test have caused its sporadical
failures.
In the test case we have tried to kill truncate statement
being executed in the first connection which was waiting
for X metadata lock on table being locked by the second
connection. Since we have released metadata lock held by
the second connection right after issuing KILL statement
sometimes TRUNCATE TABLE managed to acquire X lock before
it has noticed that it was killed. In this case TRUNCATE
TABLE was successfully executed till its end and this fact
has caused test failure since this statement didn't return
expected error in such case.
This patch addresses the problem by not releasing metadata
locks in the second connections prematurely.
Bug #22909 Using CREATE ... LIKE is possible to create
field with invalid default value
Bug #35935 CREATE TABLE under LOCK TABLES ignores FLUSH
TABLES WITH READ LOCK
Bug #37371 CREATE TABLE LIKE merge loses UNION parameter
These bugs were originally fixed in the 6.1-fk tree and the fixes
were backported as part of the fix for Bug #42546 "Backup: RESTORE
fails, thinking it finds an existing table". This patch backports
test coverage missing in the original backport. The patch contains
no code changes.
Item*) at opt_sum.cc:305
Queries applying MIN/MAX functions to indexed columns are
optimized to read directly from the index if all key parts
of the index preceding the aggregated key part are bound to
constants by the WHERE clause. A prefix length is also
produced, equal to the total length of the bound key
parts. If the aggregated column itself is bound to a
constant, however, it is also included in the prefix.
Such full search keys are read as closed intervals for
reasons beyond the scope of this bug. However, the procedure
missed one case where a key part meant for use as range
endpoint was being overwritten with a NULL value destined
for equality checking. In this case the key part was
overwritten but the range flag remained, causing open
interval reading to be performed.
Bug was fixed by adding more stringent checking to the
search key building procedure (matching_cond) and never
allow overwrites of range predicates with non-range
predicates.
An assertion was added to make sure open intervals are never
used with full search keys.
Problem: the server missed the fact that one can read from
2 indexes alternately using HANDLER interface.
Fix: check if the same (initialized) index is involved
reading next/prev values from the index.
mysql-test/r/handler_myisam.result:
Fix for bug #54007: assert in ha_myisam::index_next, HANDLER
- test result.
mysql-test/t/handler_myisam.test:
Fix for bug #54007: assert in ha_myisam::index_next, HANDLER
- test case.
sql/sql_handler.cc:
Fix for bug #54007: assert in ha_myisam::index_next, HANDLER
- check if we use the same (initialized) index
to read next/prev values from the index.
mysql-test/suite/innodb/r/innodb_information_schema.result:
The transaction is in REPEATABLE READ, since the
iso level was changed to SERIALIZABLE only for the
previous trx.
mysql-test/suite/innodb/t/innodb-semi-consistent.test:
'commit' was missing from the original patch
mysql-test/t/parser.test:
Moved the test for Bug#46527 to parser_not_embedded,
since "disconnect default" isn't allowed with
the embedded server.
mysql-test/t/parser_not_embedded.test:
Moved the test for Bug#46527 to parser_not_embedded,
since "disconnect default" isn't allowed with
the embedded server.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
