rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Since TLS server certificate verification is a client
only option, this flag is removed in both client (C/C)
and MariaDB server capability flags.
This patch reverts commit 89d759b93e
(MySQL Bug #21543) and stores the server certificate validation
option in mysql->options.extensions.
This patch also fixes:
MDEV-27690 Crash on `CHARACTER SET csname COLLATE DEFAULT` in column definition
MDEV-27853 Wrong data type on column `COLLATE DEFAULT` and table `COLLATE some_non_default_collation`
MDEV-28067 Multiple conflicting column COLLATE clauses are not rejected
MDEV-28118 Wrong collation of `CAST(.. AS CHAR COLLATE DEFAULT)`
MDEV-28119 Wrong column collation on MODIFY + CONVERT
This fixed the MySQL bug# 20338 about misuse of double underscore
prefix __WIN__, which was old MySQL's idea of identifying Windows
Replace it by _WIN32 standard symbol for targeting Windows OS
(both 32 and 64 bit)
Not that connect storage engine is not fixed in this patch (must be
fixed in "upstream" branch)
Also increase user name up to 128.
The work was started by Rucha Deodhar <rucha.deodhar@mariadb.com>,
contains audit plugin fixes by Alexey Botchkov <holyfoot@askmonty.org>.
Do not resend metadata, if metadata does not change between prepare and
execute of prepared statement, or between executes.
Currently, metadata of *every* prepared statement will be checksummed,
and change is detected once checksum changes.
This is not from ideal, performance-wise. The code for
better/faster detection of unchanged metadata, is already in place, but
currently disabled due to PS bugs, such as MDEV-23913.
The COM_MULTI did not take off. No connector is using it.
Remove related code from server, and client.
If anything it is a step simplification of already-bloated
dispatch_command(), and related code.
This commit adds a new feature to the server to add comments at the database
level. 1024 bytes is the maximum comment length allowed. If the comment length
exceeds this limit, a new error/warning code 4144 is thrown, based on whether
thd->is_strict_mode() is true/false. The database comment is also added to the
db.opt file, as well as to the information_schema.schemata table.
This patch implements engine independent unique hash index.
Usage:- Unique HASH index can be created automatically for blob/varchar/test column whose key
length > handler->max_key_length()
or it can be explicitly specified.
Automatic Creation:-
Create TABLE t1 (a blob unique);
Explicit Creation:-
Create TABLE t1 (a int , unique(a) using HASH);
Internal KEY_PART Representations:-
Long unique key_info will have 2 representations.
(lets understand this with an example create table t1(a blob, b blob , unique(a, b)); )
1. User Given Representation:- key_info->key_part array will be similar to what user has defined.
So in case of example it will have 2 key_parts (a, b)
2. Storage Engine Representation:- In this case there will be only one key_part and it will point to
HASH_FIELD. This key_part will be always after user defined key_parts.
So:- User Given Representation [a] [b] [hash_key_part]
key_info->key_part ----^
Storage Engine Representation [a] [b] [hash_key_part]
key_info->key_part ------------^
Table->s->key_info will have User Given Representation, While table->key_info will have Storage Engine
Representation.Representation can be changed into each other by calling re/setup_keyinfo_hash function.
Working:-
1. So when user specifies HASH_INDEX or key_length is > handler->max_key_length(), In mysql_prepare_create_table
One extra vfield is added (for each long unique key). And key_info->algorithm is set to HA_KEY_ALG_LONG_HASH.
2. In init_from_binary_frm_image values for hash_keypart is set (like fieldnr , field and flags)
3. In parse_vcol_defs, HASH_FIELD->vcol_info is created. Item_func_hash is used with list of Item_fields,
When Explicit length is given by user then Item_left is used to concatenate Item_field values.
4. In ha_write_row/ha_update_row check_duplicate_long_entry_key is called which will create the hash key from
table->record[0] and then call ha_index_read_map , if we found duplicated hash , we will compare the result
field by field.
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
This is to mark that a field is indirectly part of a key, which simplifes
checking if we need to have this field up to date to evaluate a key.
For example:
CREATE TABLE t1 (a int, b int as (a) virtual,
c int as (b) virtual, index(c))
would mark a and b with PART_INDIRECT_KEY_FLAG.
c is marked with PART_KEY_FLAG as before.
Description:- Mysql client crashes when trying to connect
to a fake server which is sending incorrect packets.
Analysis:- Mysql client crashes when it tries to read
server version details.
Fix:- A check is added in "red_one_row()".
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
Merge branch '10.3' into trunk
Both field_visibility and VERS_HIDDEN_FLAG exist independently.
TODO:
VERS_HIDDEN_FLAG should be replaced with SYSTEM_INVISIBLE (or COMPLETELY_INVISIBLE?).
