when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
We disallow the partitioning of a log table. You could however
partition a table first, and then point logging to it. This is
not only against the docs, it also crashes the server.
We catch this case now.
A REPLACE in the MERGE engine is actually a REPLACE
into one (FIRST or LAST) of the underlying MyISAM
tables. So in effect the server works on the meta
data of the MERGE table, while the real insert happens
in the MyISAM table.
The MERGE table has no index, while MyISAM has a
unique index. When a REPLACE into a MERGE table (
and the REPLACE conflicts with a duplicate in a
child table) is done, we try to access the duplicate
key information for the MERGE table. This information
actually does not exist, hence this results in a crash.
The problem can be resolved by modifying the MERGE
engine to provide us the duplicate key information
directly, instead of just returning the MyISAM index
number as the error key. Then the SQL layer (or "the
server") does not try to access the key_info of the
MERGE table, which does not exist.
The current patch modifies the MERGE engine to provide
the position for a record where a unique key violation
occurs.
an assertion in a debug build.
The reason is that the C API doesn't support multiple result sets for prepared
statements and attempting to execute a stored routine which returns multiple result
sets sometimes lead to a network error. The network error sets the diagnostic area
prematurely which later leads to the assert when an attempt is made to set a second
server state.
This patch fixes the issue by changing the scope of the error code returned by
sp_instr_stmt::execute() to include any error which happened during the execution.
To assure that Diagnostic_area::is_sent really mean that the message was sent all
network related functions are checked for return status.
those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"
One of the tests introduced for this bug was failing
because of path size restriction in windows.
Moved the test case to a new test which is disabled under windows.
In create_myisam_from_heap() mark all errors as fatal except
HA_ERR_RECORD_FILE_FULL for a HEAP table.
Not doing so could lead to problems, e.g. in a case when a
temporary MyISAM table gets overrun due to its MAX_ROWS limit
while executing INSERT/REPLACE IGNORE ... SELECT.
The SELECT execution was aborted, but the error was
converted to a warning due to IGNORE clause, so neither 'ok'
nor 'error' packet could be sent back to the client. This
condition led to hanging client when using 5.0 server, or
assertion failure in 5.1.
Problem was that a failing rename just left the partitions at the state
it was at the failure.
Solution was to try to revert the started rename if a failure occured.
When during the optimization an item is moved to the upper select
the item's context left unchanged. This caused wrong result in the
PS/SP mode.
The Item_ident::remove_dependence_processor now sets the context
of the select to which the item is moved to.
In a subselect all fields from outer selects are marked as dependent on
selects they are belong to. In some cases optimizer substitutes it for an
equivalent expression. For example "a_field IN (SELECT outer_field)" is
substituted with "a_field = outer_field". As we moved the outer_field to the
upper select it's not really outer anymore. But it was left marked as outer.
If exists an index over a_field optimizer choose wrong execution plan and thus
return wrong result.
Now the Item_in_subselect::single_value_transformer function removes dependent
marking from fields when a subselect is optimized away.
table
The MERGE table storage engine does not support the HA_CAN_SQL_HANDLE feature
and any attempt to open the merge table will fail with ER_ILLEGAL_HA.
After an error occurred the tables that was opened must be closed again
or they will be left in an inconsistent state. However, the assumption
made in the code for closing and register handler tables was that only
one table will be opened, and this is not true for MERGE tables which
will cause multiple tables to open.
The next time a SELECT operation was issued on the merge table it
caused the system to freeze.
This patch fixes this issue by making sure that all tables which
are opened also are closed in the event of an error.
match against.
Server crashes when executing prepared statement with duplicating
MATCH() function calls in SELECT and ORDER BY expressions, e.g.:
SELECT MATCH(a) AGAINST('test') FROM t1 ORDER BY MATCH(a) AGAINST('test')
This query gets optimized by the server, so the value returned
by MATCH() from the SELECT list is reused for ORDER BY purposes.
To make this optimization server is comparing items from
SELECT and ORDER BY lists. We were getting server crash because
comparision function for MATCH() item is not intended to be called
at this point of execution.
In 5.0 and 5.1 this problem is workarounded by resetting MATCH()
item to the state as it was during PREPARE.
In 6.0 correct comparision function will be implemented and
duplicating MATCH() items from the ORDER BY list will be
optimized.
without error
When using quick access methods for searching rows in UPDATE or
DELETE there was no check if a fatal error was not already sent
to the client while evaluating the quick condition.
As a result a false OK (following the error) was sent to the
client and the error was thus transformed into a warning.
Fixed by checking for errors sent to the client during
SQL_SELECT::check_quick() and treating them as real errors.
Fixed a wrong test case in group_min_max.test
Fixed a wrong return code in mysql_update() and mysql_delete()
mutually-nested subqueries
Queries of the form
SELECT * FROM (SELECT 1) AS t1,
(SELECT 2) AS t2,...
(SELECT 32) AS t32
caused the "Too high level of nesting for select" error
as if the query has a form
SELECT * FROM (SELECT 1 FROM (SELECT 2 FROM (SELECT 3 FROM...
The table_factor parser rule has been modified to adjust
the LEX::nest_level variable value after every derived table.
sort_buffer_size cannot allocate
The NULL return from tree_insert() (on low memory) was not
checked for in Item_func_group_concat::add(). As a result
on low memory conditions a crash happens.
Fixed by properly checking the return code.
1. BUG#21704 - Renaming column does not update FK definition
2. Changes in mysql-test/include/mtr_warnings.sql so that the testcase
for BUG#21704 doesn't fail because of the warnings generated.
Detailed revision comments:
r5488 | vasil | 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) | 13 lines
branches/5.1:
Fix Bug#21704 Renaming column does not update FK definition
by checking whether a column that participates in a FK definition is being
renamed and denying the ALTER in this case.
The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>:
http://lists.mysql.com/commits/77714
and was later adjusted to conform to InnoDB coding style by me (Vasil),
I also added some more comments and moved the bug specific mysql-test to
a separate file to make it more manageable and flexible.
and base tables
myrg_attach_children() could reuse a buffer that was allocated
previously based on a definition of a child table. The problem
was that the child's definition might have been changed, so
reusing the buffer could lead to crashes or valgrind errors
under some circumstances.
Fixed by changing myrg_attach_children() so that the
rec_per_key_part buffer is reused only when the child table
have not changed, and reallocated otherwise (the old buffer is
deallocated if necessary).
BUG#45749 - Race condition in SET GLOBAL innodb_commit_concurrency=DEFAULT
Detailed revision comments:
r5419 | marko | 2009-06-25 16:11:57 +0300 (Thu, 25 Jun 2009) | 18 lines
branches/5.1: Merge r5418 from branches/zip:
------------------------------------------------------------------------
r5418 | marko | 2009-06-25 15:55:52 +0300 (Thu, 25 Jun 2009) | 5 lines
Changed paths:
M /branches/zip/ChangeLog
M /branches/zip/handler/ha_innodb.cc
M /branches/zip/mysql-test/innodb_bug42101-nonzero.result
M /branches/zip/mysql-test/innodb_bug42101-nonzero.test
M /branches/zip/mysql-test/innodb_bug42101.result
M /branches/zip/mysql-test/innodb_bug42101.test
branches/zip: Fix a race condition caused by
SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749)
When innodb_commit_concurrency is initially set nonzero,
DEFAULT would change it back to 0, triggering Bug #42101.
rb://139 approved by Heikki Tuuri.
------------------------------------------------------------------------
use partial primary key if another index can prevent filesort
The fix for bug #28404 causes the covering ordering indexes to be
preferred unconditionally over non-covering and ref indexes.
Fixed by comparing the cost of using a covering index to the cost of
using a ref index even for covering ordering indexes.
Added an assertion to clarify the condition the local variables should
be in.
