NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
format." warnings
Despite the fact that a statement would be filtered out from binlog, a
warning would still be thrown if it was issued with the LIMIT.
This patch addresses this issue by checking the filtering rules before
printing out the warning.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning-master.opt:
Parameter to filter out database: "b42851".
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Added a new test case.
sql/sql_class.cc:
Added filtering rules check to condition used to decide whether to
printout warning or not.
mysqlbinlog --database parameter was being ignored when processing
row events. As such no event filtering would take place.
This patch addresses this by deploying a call to shall_skip_database
when table_map_events are handled (as these contain also the name of
the database). All other rows events referencing the table id for the
filtered map event, will also be skipped.
client/mysqlbinlog.cc:
Added shall_skip_database call to the part of the code that handles
Table_map_log_events. It inspects the database name and decides whether
to filter the event or not. Furthermore, if table map event is filtered
next events referencing the table id in the table map event, will also
be filtered.
mysql-test/suite/binlog/t/binlog_row_mysqlbinlog_db_filter.test:
Test case that checks if row events are actually filtered out.
sql/log_event.h:
Added a map for holding the currently ignored table map events.
Table map events are inserted when they shall be skipped and removed
once the last row event in the statement is processed.
"freeing items"
The calculation of the table map log event in the event constructor
was one byte shorter than what would be actually written. This would
lead to a mismatch between the number of bytes written and the event
end_log_pos, causing bad event alignment in the binlog (corrupted
binlog) or in the transaction cache while fixing positions
(MYSQL_BIN_LOG::write_cache). This could lead to impossible to read
binlog or even infinite loops in MYSQL_BIN_LOG::write_cache.
This patch addresses this issue by correcting the expected event
length in the Table_map_log_event constructor, when the field metadata
size exceeds 255.
sql/log_event.cc:
Added the extra byte as net_store_length imposes.
In the output from mysqlbinlog, incident log events were
represented as just a comment. Since the incident log event
represents an incident that could cause the contents of the
database to change without being logged to the binary log,
it means that if the SQL is applied to a server, it could
potentially lead to that the databases are out of sync.
In order to handle that, this patch adds the statement "RELOAD
DATABASE" to the SQL output for the incident log event. This will
require a DBA to edit the file and handle the case as apropriate
before applying the output to a server.
mysql-test/suite/binlog/t/binlog_incident-master.opt:
Options file to cause server to generate an incident log
event when executing a REPLACE.
mysql-test/suite/binlog/t/binlog_incident.test:
Test to check that the incident log event is represented
correctly in the output from mysqlbinlog.
sql/log_event.cc:
The incident log event now ouput a "RELOAD DATABASE" instead
of just a comment. RELOAD DATABASE is not an existing command
and will generate a syntax error.
Mysql server crashes because unsafe statements warning is wrongly elevated to error,
which is set the error status of Diagnostics_area of the thread in THD::binlog_query().
Yet the caller believes that binary logging shouldn't touch the status, so it will
set the status also later by my_ok(), my_error() or my_message() seperately
according to the execution result of the statement or transaction.
But the status of Diagnostics_area of the thread is allowed to set only once.
Fixed to clear the error wrongly set by binary logging, but keep the warning message.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Change unsafe warning to NOTE level
mysql-test/suite/binlog/r/binlog_unsafe.result:
Test case result for unsafe statements to ensure mysql sever don't crash
mysql-test/suite/binlog/t/binlog_unsafe.test:
Test case for unsafe statements to ensure mysql sever don't crash
mysql-test/suite/rpl/r/rpl_skip_error.result:
Change unsafe warning to NOTE level
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
Change unsafe warning to NOTE level
mysql-test/suite/rpl/r/rpl_udf.result:
Change unsafe warning to NOTE level
sql/sql_class.cc:
the error status of the thread is cleared When a warning is elevated to an error
because of unsafe warning of binary log.
The reason of the bug is in that the test makes a trick with relay log files and
did not reset fully at the end.
If mtr does not restart the test the new SQL thread tried to work with the old time
session data.
Fixed with deploying RESET slave at the clean-up.
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
adding RESET slave to force active mi and rli data struct to be reset.
The slave SQL thread will deal with a fresh structures each time it restarts.
When binlog_format is STATEMENT and the statement is unsafe before,
the unsafe warning/error message was issued without checking
whether the SQL_LOG_BIN was turned on or not.
Fixed with adding a sql_log_bin_toplevel flag in THD to check
whether SQL_LOG_BIN is ON in current session whatever the current is in sp or not.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Test case result for unsafe warning/error message
mysql-test/suite/binlog/t/binlog_unsafe.test:
Test case for unsafe message warning/error
sql/set_var.cc:
Adding a function set_option_log_bin_bit() which specailly handles to
the change of SQL_LOG_BIN bit in order to set sql_log_bin_toplevel
according to SQL_LOG_BIN current value at the same time.
sql/sql_class.cc:
Initialize the flag sql_log_bin_toplevel in THD::init(),
and add the condition to check whether unsafe ror message was issued.
sql/sql_class.h:
Add a sql_log_bin_toplevel flag in THD to indicate whether the toplevel SQL_LOG_BIN is
Set wrong sql_mode when creating a procedure.
So that the sql_mode can't be writen into binary log correctly.
Restore the current session sql_mode right before generating the binlog event
when creating a procedure.
mysql-test/suite/binlog/r/binlog_sql_mode.result:
Test result
mysql-test/suite/binlog/t/binlog_sql_mode.test:
Test file for sql_mode testing
sql/sp.cc:
Restore the current session sql_mode right before generating the binlog event.
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
Correcting some tests that was failing in pushbuild as well as fixing result
file for some tests that are not executed in the default MTR run.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
Need to reset master to avoid the check to be for the wrong binlog file.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Need to reset master to avoid the check to be for the wrong binlog file.
Post-merge fixes. Changes to some result sets.
mysql-test/r/commit_1innodb.result:
TRUNCATE TABLE does not cause the binary log to do commits any more.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
TRUNCATE TABLE is not transactional, hence does not have BEGIN/COMMIT around itself.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
TRUNCATE TABLE is not transactional, hence does not have BEGIN/COMMIT around itself.
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
TRUNCATE TABLE is not transactional, hence does not have BEGIN/COMMIT around itself.
mysql-test/suite/rpl/r/rpl_truncate_2myisam.result:
STOP SLAVE was replaced with include file.
mysql-test/suite/rpl/r/rpl_truncate_3innodb.result:
STOP SLAVE was replaced with include file.
The problem is that a unfiltered user query was being passed as
the format string parameter of sql_print_warning which later
performs printf-like formatting, leading to crashes if the user
query contains formatting instructions (ie: %s). Also, it was
using THD::query as the source of the user query, but this
variable is not meaningful in some situations -- in a delayed
insert, it points to the table name.
The solution is to pass the user query as a parameter for the
format string and use the function parameter query_arg as the
source of the user query.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Add test case result for Bug#42634
mysql-test/suite/binlog/t/binlog_unsafe.test:
Add test case for Bug#42634
sql/sql_class.cc:
Don't pass the user query as a format string.
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
There were two separate problems with the code, both of which are fixed with
this patch:
1. An error was printed by InnoDB for TRUNCATE TABLE in statement mode when
the in isolation levels READ COMMITTED and READ UNCOMMITTED since InnoDB
does permit statement-based replication for DML statements. However,
the TRUNCATE TABLE is not transactional, but is a DDL, and should therefore
be allowed to be replicated as a statement.
2. The statement was not logged in mixed mode because of the error above, but
the error was not reported to the client.
This patch fixes the problem by treating TRUNCATE TABLE a DDL, that is, it is
always logged as a statement and not reporting an error from InnoDB for TRUNCATE
TABLE.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Adding new test to check that TRUNCATE TABLE is written correctly
to the binary log.
mysql-test/extra/rpl_tests/rpl_truncate.test:
Removing redundant testing by eliminating settings of BINLOG_FORMAT.
mysql-test/extra/rpl_tests/rpl_truncate_helper.test:
Replacing slave and master reset code with include file.
Removing settings of BINLOG_FORMAT.
Replacing printing of table contents to compare master and slave
with diff_tables.inc.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for InnoDB
in all isolation levels.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for MyISAM.
mysql-test/suite/binlog/t/disabled.def:
Disabling binlog_truncate_innodb since it does not work (yet).
sql/sql_base.cc:
Correcting setting of capabilities flags to make the comparison with 0
later in the code work correctly.
sql/sql_delete.cc:
Re-organizing code to ensure that TRUNCATE TABLE is logged in statement
format and that row format is not used unless there are rows to log (which
there are not when delete_all_rows() is called, so this has to be logged
as a statement).
When using CREATE TEMPORARY TABLE LIKE to create a temporary table,
or using TRUNCATE to delete all rows of a temporary table, they
did not set the tmp_table_used flag, and cause the omission of
"SET @@session.pseudo_thread_id" when dumping binlog with mysqlbinlog,
and cause error when replay the statements.
This patch fixed the problem by setting tmp_table_used in these two
cases. (Done by He Zhenxing 2009-01-12)
mysql-test/suite/binlog/r/binlog_tmp_table.result:
Add test case for BUG#35583
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Add test case for BUG#35583
sql/sql_delete.cc:
set thd->tmp_table_used when truncate temporary table
sql/sql_table.cc:
set thd->tmp_table_used when using create like to create temporary tables
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Added cleanup of status variables to the end of binlog_database.
Re-recorded .result file to account for cleanup statement.
NOTE: binlog.binlog_innodb also has had an FLUSH STATUS; statement added to it as well, but
adding this cleanup as a preventative measure.
The binlog_innodb test was sensitive to what tests ran before it. Now run
FLUSH STATUS before performing operations that need to be checked.
sys_var_thd_ulong::update() was improperly casting an option value from
ulonglong to ulong before comparing it to the max allowed value. On systems
where ulong and ulonglong are of different size, this caused values greater
than ULONG_MAX to wrap around (not be truncated to ULONG_MAX, which appears to
have been the intention of the original coder), and caused some checks to work
incorrectly. This wasn't generally visible to the user, because later checks
would prevent the wrapped-around value from being used. But it caused warning
messages to differ between 32- and 64-bit platforms. Fix is to just remove the
cast. Also added a DBUG_ASSERT to ensure that the value really is capped
properly before finally stuffing it into the ulong.
binlog_row_mix_innodb_myisam resutls are corrected.
The last operations prior the dup error is
TRUNCATE table t2;
Therefore after
--error ER_DUP_ENTRY
INSERT INTO t2 select * from t1;
table t2 must be empty, and that is what the updated results confirm.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
results changed due to Bug #33420 fixing.
Extending bug#40221 regression test: 1. include INSERT 2. convert prim key + autoinc to
unique.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
results changed.
mysql-test/suite/binlog/t/binlog_innodb_row.test:
Extending bug#40221 regression test to include the INSERT dup key errored-out case.
after rollback on master
When starting a transaction with a statement containing changes
to both transactional tables and non-transactional tables, the
statement is considered as non-transactional and is therefore
written directly to the binary log. This behaviour was present
in 5.0, and has propagated to 5.1.
If a trigger containing a change of a non-transactional table is
added to a transactional table, any changes to the transactional
table is "tainted" as non-transactional.
This patch solves the problem by removing the existing "hack" that
allows non-transactional statements appearing first in a transaction
to be written directly to the binary log. Instead, anything inside
a transaction is treaded as part of the transaction and not written
to the binary log until the transaction is committed.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Removing positions from SHOW BINLOG EVENTS and using
reset_master_and_slave to start on a fresh binary log each time.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Adding explicit commit in AUTOCOMMIT=0 to make test work correctly.
mysql-test/suite/rpl/t/rpl_trigger.test:
Adding test case for BUG#40116.
sql/log.cc:
Changing commit logic in binlog_commit() to only commit when
committing a real transaction or committing a punch transaction.
A transaction could result in having an extra event after a query that
errored e.g because of a dup key. Such a query is rolled back in
innodb, as specified, but has not been in binlog.
It appeares that the binlog engine did not always register for a query
(statement) because the previous query had not reset at its statement
commit time. Because of that fact there was no roll-back to the
trx_data->before_stmt_pos position and a the pending event of the
errorred query could become flushed to the binlog file.
Fixed with deploying the reset of trx_data->before_stmt_pos at the end
of the query processing.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
a new test file to contain tests dealing with binlogging innodb with
the row-based format.
mysql-test/suite/binlog/t/binlog_innodb_row.test:
a new test file to contain tests dealing with binlogging innodb with
the row-based format.
sql/log.cc:
Flushing the pending row event at binlog_end_trans() is moved down to the commit
branch.
Resetting of trx_data->before_stmt_pos to the uninitialized value at the end of the
statement is implemented in binlog_commit() and binlog_rollback().
Asserting emptiness the transaction cache after reset() and the uninitilized value for the statement's savepoint binlog position.
Problem: Many test cases don't clean up after themselves (fail
to drop tables or fail to reset variables). This implies that:
(1) check-testcase in the new mtr that currently lives in
5.1-rpl failed. (2) it may cause unexpected results in
subsequent tests.
Fix: make all tests clean up.
Also: cleaned away unnecessary output in rpl_packet.result
Also: fixed bug where rpl_log called RESET MASTER with a running
slave. This is not supposed to work.
Also: removed unnecessary code from rpl_stm_EE_err2 and made it
verify that an error occurred.
Also: removed unnecessary code from rpl_ndb_ctype_ucs2_def.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Made test clean up after itself.
mysql-test/extra/rpl_tests/rpl_stm_EE_err2.test:
Made test clean up after itself.
Also removed unnecessary save_master_pos.
Also made test verify that an error occurred.
mysql-test/extra/rpl_tests/rpl_truncate_helper.test:
Made test clean up after itself.
mysql-test/include/query_cache.inc:
Made test clean up after itself.
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
Made test clean up after itself.
mysql-test/suite/rpl/t/rpl_alter_db.test:
Made test clean up after itself.
Easiest to refactor the test a little, to use an auxiliary database instead of mysql:
Then we don't need to read the collation at the start of the test and reset it at the
end of the test. We can just drop the database.
mysql-test/suite/rpl/t/rpl_drop_db.test:
Made test clean up after itself.
mysql-test/suite/rpl/t/rpl_drop_view.test:
Made test clean up after itself.
mysql-test/suite/rpl/t/rpl_events.test:
Made test clean up after itself.
mysql-test/suite/rpl/t/rpl_idempotency.test:
Made test clean up after itself.
mysql-test/suite/rpl/t/rpl_ignore_table.test:
Made test clean up after itself.
The existing cleanup code didn't work, because the --replicate-*
options prevented the "drop table" from being replicated. Moved
"drop table t4" to a statement of its own.
mysql-test/suite/rpl/t/rpl_packet.test:
Made test clean up after itself.
Also replaced SHOW SLAVE STATUS by query_get_value(SHOW SLAVE STATUS...),
since only one column of the result was interesting.
mysql-test/suite/rpl/t/rpl_row_max_relay_size.test:
Made test clean up after itself.
Instead of setting binlog format at the beginning of the test, we just
do 'source include/have_binlog_format_row.inc' like all other tests.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2other.test:
Made test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
Made test clean up after itself.
Also removed unnecessary 'create table; drop table'
Also removed unnecessary use of --command
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Made test clean up after itself.
mysql-test/t/innodb-autoinc-optimize.test:
Made test clean up after itself.
mysql-test/t/innodb.test:
Made test clean up after itself.
mysql-test/t/log_tables.test:
Made test clean up after itself.
mysql-test/t/mysql_client_test.test:
Made test clean up after itself.
mysql-test/t/partition.test:
Made test clean up after itself.
mysql-test/t/status.test:
Made test clean up after itself.
The Blackhole engine did not support row-based replication
since the delete_row(), update_row(), and the index and range
searching functions were not implemented.
This patch adds row-based replication support for the
Blackhole engine by implementing the two functions mentioned
above, and making the engine pretend that it has found the
correct row to delete or update when executed from the slave
SQL thread by implementing index and range searching functions.
It is necessary to only pretend this for the SQL thread, since
a SELECT executed on the Blackhole engine will otherwise never
return EOF, causing a livelock.
mysql-test/extra/binlog_tests/blackhole.test:
Blackhole now handles row-based replication.
mysql-test/extra/rpl_tests/rpl_blackhole.test:
Test helper file for testing that blackhole actually
writes something to the binary log on the slave.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
Replication now handles row-based replcation.
mysql-test/suite/rpl/t/rpl_blackhole.test:
Test that Blackhole works with primary key, index, or none.
sql/log_event.cc:
Correcting code to only touch filler bits and leave
all other bits alone. It is necessary since there is
no guarantee that the engine will be able to fill in
the bits correctly (e.g., the blackhole engine).
storage/blackhole/ha_blackhole.cc:
Adding definitions for update_row() and delete_row() to return OK
when executed from the slave SQL thread with thd->query == NULL
(indicating that row-based replication events are being processed).
Changing rnd_next(), index_read(), index_read_idx(), and
index_read_last() to return OK when executed from the slave SQL
thread (faking that the row has been found so that processing
proceeds to update/delete the row).
storage/blackhole/ha_blackhole.h:
Enabling row capabilities for engine.
Defining write_row(), update_row(), and delete_row().
Making write_row() private (as it should be).
The problem is that when statement-based replication was enabled,
statements such as INSERT INTO .. SELECT FROM .. and CREATE TABLE
.. SELECT FROM need to grab a read lock on the source table that
does not permit concurrent inserts, which would in turn be denied
if the source table is a log table because log tables can't be
locked exclusively.
The solution is to not take such a lock when the source table is
a log table as it is unsafe to replicate log tables under statement
based replication. Furthermore, the read lock that does not permits
concurrent inserts is now only taken if statement-based replication
is enabled and if the source table is not a log table.
include/thr_lock.h:
Introduce yet another lock type that my get upgraded depending
on the binary log format. This is not a optimal solution but
can be easily improved later.
mysql-test/r/log_tables.result:
Add test case result for Bug#34306
mysql-test/suite/binlog/r/binlog_stm_row.result:
Add test case result for Bug#34306
mysql-test/suite/binlog/t/binlog_stm_row.test:
Add test case for Bug#34306
mysql-test/t/log_tables.test:
Add test case for Bug#34306
sql/lock.cc:
Assert that TL_READ_DEFAULT is not a real lock type.
sql/mysql_priv.h:
Export new function.
sql/mysqld.cc:
Remove using_update_log.
sql/sql_base.cc:
Introduce function that returns the appropriate read lock type
depending on how the statement is going to be replicated. It will
only take a TL_READ_NO_INSERT log if the binary is enabled and the
binary log format is statement-based and the table is not a log table.
sql/sql_parse.cc:
Remove using_update_log.
sql/sql_update.cc:
Use new function to choose read lock type.
sql/sql_yacc.yy:
The lock type is now decided at open_tables time. This old behavior was
actually misleading as the binary log format can be dynamically switched
and this would not change for statements that have already been parsed
when the binary log format is changed (ie: prepared statements).
SUPER is not required to change binlog format for session
A user without SUPER privileges can change the value of the
session variable BINLOG_FORMAT, causing problems for a DBA.
This changeset requires a user to have SUPER privileges to
change the value of the session variable BINLOG_FORMAT, and
not only the global variable BINLOG_FORMAT.
mysql-test/suite/binlog/t/binlog_grant.test:
Adding test to test grants needed for SQL_LOG_BIN and BINLOG_FORMAT.
sql/set_var.cc:
Adding code to check that user has SUPER permission
needed to change the value of BINLOG_FORMAT.
sql/set_var.h:
Adding function sys_var_thd_binlog_format::check()
The size of the Innodb_buffer_pool_pages differs by one byte on row versus statement
log, so neuter the last position of the stringified decimal representation. Innobase
says the size isn't very important in any case.
Also, split out the "mixed" format to its own file, as mtr seems to dislike having only
stm and row but not mix.
tables open
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
mysql-test/extra/binlog_tests/database.test:
Added test to ensure that DROP DATABASE does not affect the replication mode.
sql/sql_db.cc:
Removed code that clears the current_stmt_binlog_row_based flag.
Added code to disable the binary log while dropping the objects
in a database.
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
mysql-test/extra/binlog_tests/database.test:
Added test to ensure that DROP DATABASE does not affect the replication mode.
mysql-test/suite/binlog/r/binlog_database.result:
Result file change.
sql/sql_db.cc:
Removed code that clears the current_stmt_binlog_row_based flag.
Added code to disable the binary log while dropping the objects
in a database.
